Portege Z930 - slow Wi-Fi on battery under Linux

Hi,
I've just bought a Z930 and I run it under Linux Mint and Windows 7.
I've a problem under Linux that I don't have on Windows.
When I put my computer on battery, there is a significative signal lowering.
Do somebody why there is such a problem ? Can we fix it by configuring my network device ?
Thanks for your help !
Badmaul

Sounds like the Wifi driver needs updating, perhaps try an Ubuntu Live CD v12 and see how that goes. Ubuntu is very Toshiba friendly now.

Similar Messages

  • Detection of UltraBay Battery under Linux ( Mint )

    Hello Forum,
    I am using Linux Mint 12 on my T420s. After quite a lot of work a get almost everything working as it pleases.
    But there is one issue i just can't figure out.
    I use the main battery in combination with a ultrabay battery. On clean reboot i only get the indicator that shows the main battery. I have to run powertop once so that i get the indicator showing the bay battery.
    Does anyone have the same issue or maybe figured out a solution?
    ( I don't want to run powertop via startupscript )
    Sincerely,
    Loranon

    Sounds like the Wifi driver needs updating, perhaps try an Ubuntu Live CD v12 and see how that goes. Ubuntu is very Toshiba friendly now.

  • Portege Z930-SP3242L Battery replacement

    Hi! I have a Portege Z930-SP3242L that's 2 years old and the battery is dying.
    Where can I get a new battery? What's the OEM part?
    Best regards,
    JIM
    Solved!
    Go to Solution.

    Portege Z930-SP3242L (PT234P-00KLM1)
    I've asked Peter from Toshiba about this. In the meantime, here's a picture.
    -Jerry

  • Windows 8 upgrade on Portege Z930

    Hallo!
    Just got my Portege Z930 PT235E with Windows 7 Pro preinstelled and Winds 8 DVD.
    I tried to upgrade to Windows 8 but unsecessful. Starting from boot I get message that this is not bootable dvd. Also tried to start setup under Windows 7 but there is no setup.exe on DVD...
    What is the process to upgrade it to Win 8?

    Really strange
    Anyway before trying to install Win 8, you should definitely create an Recovery disk containing the preinstalled Win 7 system!
    Why? Because you will not be able to install Win 7 anymore without the recovery disk.
    So if you want to use Win 7 in the future, create such disk.
    Now back to Win 8.
    Please access the BIOS and switch from CSM to UEFI.
    Save the changes and then boot from the Win 8 DVD
    Would be interesting to know if this would work

  • Portege Z930 - Display Driver doesn't work correctly

    Hello,
    we have a Portege Z930 with Windows 7 64 bit in use where the Intel Display Driver seem to work incorrectly.
    First problem is the slow presentation on display - if we open a picture (simple JPG) and move the window, the window frame will break during the move and be shown very bizarre.
    Next we installed a dynadock U3.0 docking station for using two external displays additionally. This works even worse. For the docking station we used the driver from the CD included on delivery, and we connect it over an USB 3.0 slot.
    On booting switching onto the 2 displays instead of the internal notebook display doesn't work - so we use the workaround of using an extended desktop over all 3 displays (2 externals and the internal notebook display as third).
    In Internet Explorer we had to switch off GPU Rendering and use Software Rendering instead because otherwise we observed critical misfunctions on the external displays (having 2 windows open the display froze or couldn't show moving windows). Nevertheless the display is not satisfactioning.
    We already tried 3 different versions of the recommendet Intel Driver which is also offered by Toshiba for download; we loaded it there and also 2 more versions (one newer, one older) from Intel directly.
    So how can we get that working correctly?
    Thanks in advance and regards,
    N. Cochems

    Most importantly. make sure you have Win7 Service Pack 1 installed. New notebooks have problems running in win7 RTM (no service packs).
    Sounds like Windows is using the standard VGA driver instead of the Intel driver. Uninstall all the display drivers from Control Panel->Programs and Features then go to the Toshiba website and install the Intel Chipset Utility then the Intel Display Driver, then go to DisplayLink.com and install the latest DisplayLink driver for the dynadock. The new DisplayLink v7.xx driver fixes many problems found in the v6.xx drivers.
    Double check that the Intel drivers are installed correctly in Device Manager.

  • Choppy, distorted audio on Portege Z930 after updating from Win7 to Win8 64

    Just wanted to share an info with you which cost me some time to work out, regarding the audio playback on a Portege Z930.
    When I got my brand new Z930-14L, it was running Win7.
    I tested everything like you do when you get a new machine and it all worked fine - including audio playback.
    When I updated to Win8-64 from the CDs that came with the computer, still everything seemed to work fine and I had not changed any driver or setup.
    However, after a couple of minutes, the audio playback detoriated. It got choppy, distorted, interrupted, stuttering and I was shocked.
    Funnily, as soon as I turned my attention to the computer again, playback was OK again - though no screensaver had come up and no power save mode came up in such short time. I knew it was no hardware issue (because it worked under Win7), it was not a driver issue (because the first 5 minutes the sound was immaculate), it was not a ground loop (as many have suggested) because that sounds differently.
    Thanks to another forum, I found out that it is actually the combination of Windows Defender, Win8-64 Pro and the audio driver that causes this. If the device is idle for some minutes, Defender thinks its a good idea to use the idle time to scan the SSD drive - causing inteference with the audio playback. Of course, you cannot simply disable or switch off the central antivirus process, which would kinda ruin the whole point. :-)
    _So I installed Kaspersky suite on the machine (which automatically disables the Windows Defender) and the issue was gone!_ This is probably the only time that installing an antivirus suite FIXES an issue. :-)
    BTW, this is probably not limited to this particular antivirus product, just play a bit with Defender.
    Best, Yuppie

    >So I installed Kaspersky suite on the machine (which automatically disables the Windows Defender) and the issue was gone! This is probably the only time that installing an antivirus suite FIXES an issue.
    Thank you very much for sharing this details here in the community.
    I guess information could be useful for others who have such similar sound problems.

  • Portege Z930: Loss of Fn keys after Win 8 upgrade - cannot turn WiFi on/off

    After many months biding my time I have just embarked upon upgrading my Portege Z930-11G to Windows 8 Pro.
    Largely this has gone to plan with the exception that after running the Toshiba Upgrade Assistant I've lost the Fn key display and about half the keys no longer seem to function at all.
    The only key I ever used routinely is the Fn+F8 option to turn WiFi on/off.
    So now I cannot enable the WiFi on the machine.
    There must, surely, be a mean to do this but I can't find it. Does anyone have a suggestion? I'm OK for now as I have a wired LAN in the house but once I get out on the road I'm going to struggle without WiFi.
    Before running the upgrade assistant the Fn key brought the key display up across the top of the screen and I surely wish I'd turned WiFi on at that point.
    The Fn key utility offers very little control of the Fn keys. It does not offer the ability to do anything other than disable five on screen notifications for keyboard backlight, power plan, touch pad, cursor overlay and numeric overlay.
    All help gratefully received.
    Andrew

    > So now I cannot enable the WiFi on the machine.
    First of all you can enable and disable the WiFi using function key but you can also enable the WLan in Windows 8 settings
    Win key + C -> Settings -> Change PC settings -> Wireless
    Now you can use the wireless devices slider to enable or disable the WLan.
    But to get the FN key working you have to install the +Toshiba Function Key Utility+ for Win 8 and +Toshiba System Driver+ for Win 8

  • Cannot download BIOS file for Portege Z930 - error 404

    Hi,
    My tempro tool says there is a new BIOS available for my Portege Z930.
    But the link gives nothing.
    Can someone fix this ? Or have the correct link
    Thank you
    Markus

    +1 This is very frustrating. Tempro alerts are all very well but no use at all if Toshiba can't be bothered to maintain links!
    Please fix asap, Toshiba.
    Richard

  • Portege Z930-10E - broken screen twice in 3 months only

    I am laptop user since 12 years. July, 30th I bought my Portege Z930, thinking it was my best decision in many years.
    Less than a month later, when opening the screen during a flight, its simply broken the screen, making it impossible to use any more.
    After sending it to official service in Spain, I was told that it was my fault and for a bad use, so I had to pay more than 300 (almost 400$). I claimed to customer support, explaining them about their excessive flexible top and rigid screen, and nothing new.
    It was only my fault.
    Last Octobers, 11th again when opening my top, this time using a tape label attached by myself, in order to avoid blending the screen, it scratched again.
    I can`t afford this is only my fault but it is a real design problem, to get the lightest ultrabook in market.
    If anyone may give me support for this serious problem, it will be very appreciated

    Hi
    This is really amazing story and I believe you are the first one who reports about something like this.
    Portege Z930 is for a while on the market and I never heard about such issues.
    Please dont understand me wrong but it is really strange that this happen already three times.
    I saw this machine and the whole construction seems pretty stabile to me. When you open the display I hope your fingers are placed in the middle of the display cover and not by the side. The pressure on display cover hinges must be the same. If you hold the display on one side only I can imagine that something like this can happen but it shouldnt.
    Portege series is one of the best Toshibas business notebooks so I believe Toshiba designer and technicians take it very seriously and I cannot imagine that they make such design mistake.
    I still have old Portege 2000 and it was lightest notebook at this time with very sensible display and display cover hinges but there is no problem at all.
    We can discuss here for days and I really hope that someone with the same Portege can post own experiences but all this you must try to clarify with Toshiba. Be careful when you open it and hold the display in the middle only.
    Good luck.

  • Portege Z930: How to create GPRS / Wifi / LAN connection profiles?

    Hi !
    I can't find any software (Toshiba or Intel) on my Portege Z930 that can manage
    connections profiles to automatically be connected on GPRS or Wifi or LAN regardless to connections available (office, home, public area...)
    Toshiba Wirelss manager runs with GPRS only and not wifi or lan
    Thanks for your help !
    Best Regards

    Hi
    Such universal utility is not known to me.
    The Toshiba Wireless manager handles the 3G profiles.
    For Wlan connectivity and profile management you could use the TOSHIBA Configfree
    Here a short details:
    http://forums.toshiba.com/t5/General-Features-Knowledge-Base/TOSHIBA-Configfree-Utilities/ta-p/347098
    Well, and LAN would works until the LAN cable is connected :)

  • Extended warranty for Portege Z930-8113

    Is Extended warranty ( Part number: EXT103I-V ) available for Portege Z930-8113?

    In my opinion you should pick up info about warranty on official Toshiba page like http://www.toshiba.eu/services/warranty-extension/
    Other way contact nearest authorized Toshiba service provider in your country. They can help you and offer exact information.

  • After ios7 update my iphone is like android os dead slow processing , too fast battery drain,calling process is too low where is apple brand going my friends 11 members using iphone all are got this problem one thing fans like me y they spoil his name ??

    after ios7 update my iphone 4 is like android os dead slow processing , too fast battery drain,calling process is too low where is apple brand going my friends 11 members using iphone all are got this problem one thing apple have unique and unique fans like me why they spoil their name like this update iam too disappointed iam not say for oppose apple iam say for feedback to grow apple in world because i love apple more please solve it
                       by real customers
    iPhone 4, iOS 7, iam apple suporter

    please help me after ios7 update my phone is tooo slowww i want my old iphone                         

  • IPad air is slow to charge the battery

    My new iPad air is slow to charge the Battery? I am comparing it to an ipad2

    Try a different cable
    Use the power adapter/charger that came with the device
    Don't charge from a PC's USB ports as they likely do not supply enough current to adequately charge the iPad. Charging will be slow.
    Don't use an iPhone's charger to charge the iPad. It's not recommended as it does not supply enough current and will charge *very* slowly.
    Try to clean out the 30-pin/Lightning port on the device using a clean toothbrush (or similar) & blow it out. There may be dust/lint preventing proper electrical connection. The older 30-pin port is much more prone to dust & lint getting inside and it's internal conductors are very small. Clean the port out thoroughly and also the 30-pin connector on the cable.

  • Need motherboard for Portege Z930-B113 send to Brazil

    Hi,* I live in Brazil and bought a notebook Portege Z930-B113 at Dubai on a trip.
    The same malfunctioned and burned his motherboard, and now his need a new one.
    Like here in Brazil is not supported and toshiba don't sell pices for this ultrabook,
    Someone could send for me a e-mail or site an store to purchase this motherboard, with a international shipping?
    If need more informations ask.
    Thank you.

    I dont think some service provider from Dubai will send you new motherboard. Try to contact them per mail and ask what can be done about it.
    What I can imagine is that you must send your notebook and get it back when repaired.
    Check service addresses on http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/
    I am from Europe and my friend come from US so he brought his US model here. He got info that his model cannot be repaired here in Europe and notebook must be sent to the USA.

  • Portege Z930-12J - WiDi update to version 3.5 and higher

    Hi, I have to update WiDi at my computer to 3.5 or higher because it is needed for establishing connection with the smart TV. It requires to update also the graphics driver but none of these drivers are available via TEMPRO.
    When I try to install it directly from the Intel support site it says that the graphics driver was not authorised by Toshiba. Thanx for any suggestion! (But I would rather avoid upgrading of my Win to 8.1 and using Miracast.)
    PC - Toshiba Portege Z930-12J
    OS Win7

    > When I try to install it directly from the Intel support site it says that the graphics driver was not authorised by Toshiba.
    As far as I know you can install the Intel graphic card driver through the device manager.
    You have to download the Intel driver page (zip) including the single driver files.
    Then you have to perform the update using the Advanced installation procedure which will allow you to point directly to the zip package.
    The system would pick up the driver files from this folder automatically.

Maybe you are looking for

  • Powermac G5 wont boot. Please help!!!

    my PowerMac G5 wont boot, power suply or graphics card? When i press the power button is the chime and then after a while (fem minutes) the fans start revving up, all with a black screen........

  • Need a B/W Laser Printer suggestion

    We have a G5 Intel (no wireless) and a G4/1.5 Mini Mac (with Airport) in the office. We are in need of a new laser printer that will be compatible with both of our computers. Don't want to spend a fortune, but we need one that will que some large doc

  • Exit window help

    I am try to figure out how to have an action to close out the browser window. I want my button to play a sound then it will go to a certin frame in the timeline and when it hits the frame with the action I want it to close out the window. help Please

  • Hi there, i have Mac OS X 10.5.8 with Safari browser 5.0.6, can my Safari be upgraded gratis or i need to go to App Store? thanks

    Hi there, I have Mac OS X 10.5.8 with Safari Browser 5.0.6, can my Safari be upgraded gratis or do I need to go to App Store? Thanks.

  • Transparent proxy & IP/IP gateway

    I am trying to configure our BM3.7 system to us transparent proxy in conjunction with IP/IP gateway. I want to be able to take advantage of the caching features of the proxy and the access control of the gateway. According to the install manual I mus