Portfast case ping transmit failed general failure
Hi
today i add a host in a vlan, but it can't ping itself and get ping transmit failed general failure unless remove the spaning portfast command. i try difeerent vendor PC, IBX... ,HX..,DXl..., all host can't ping itself.
the reason is the portfast? but portfast isn't only fotr host pc,
the following is same our command about spaning.sorry for i can't past all command because our com private.
errdisable recovery cause udld
errdisable recovery cause bpduguard
errdisable recovery cause security-violation
errdisable recovery cause channel-misconfig
errdisable recovery cause pagp-flap
errdisable recovery cause dtp-flap
errdisable recovery cause link-flap
errdisable recovery cause gbic-invalid
errdisable recovery cause l2ptguard
errdisable recovery cause psecure-violation
errdisable recovery cause dhcp-rate-limit
errdisable recovery cause unicast-flood
errdisable recovery cause vmps
errdisable recovery cause storm-control
errdisable recovery cause arp-inspection
errdisable recovery interval 30
power redundancy-mode redundant
no file verify auto
spanning-tree mode pvst
spanning-tree loopguard default
spanning-tree portfast bpduguard default
spanning-tree extend system-id
what do you see under "show interface status" of the switch when the issue occurs?
do you see input/output rate on that interface when the issue occurs?
what is the spanning-tree state of that port?
when you say you get "ping transmit failed", are you getting that error when you try to ping the PC's IP address from the PC?
are you able to ping 127.0.0.1?
and, what does the PC's network connection say?
Similar Messages
-
Been experiencing some connectivity issues on a 2008 r2 server, so started basic ping tests as first point.
if i start a normal command prompt and try a ping, i get an error - Ping: transmit failed General failure
If i start the command prompt with elevated privileges the ping works fine.
If i try to use the diagnose function on the nic, i get an error that the "Diagnostics Policy Service is not running". If i try to start the service it gives an "access denied" message. This is a basic service using the local service
account to start.
This all seems to be pointing to an issue with the permissions on the server, only problem is, i'm not sure what could have gone wrong. We have not made any changes to the server for a while (so maybe something got corrupted in the registry) . how would
we go about restoring default system rights?
Any suggestions welcomefirst , you must check administrators or current user 's group membership and elevated privilage for current user
then then run this command
ipconfig /flushdns
nbtstat -R
nbtstat -RR
netsh int reset all
netsh int ip reset
netsh winsock reset
and for the "Diagnostic Policy Service" service, the issue may occur when the account Trustedinstaller
is missing the permissions for the key below:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DPS\Parameters
permission needed: Full Control, Read
MCSE | MCITP [x2] | ISMS27001 -
Ping drop and general Failure on wireless
Hi all,
I am facing the ping drop and general failure error when I am connected to AP and try to do ping any IP with the ping size is 5500 bytes.Print screen shot is attached for your reference.
Product/Model Number : AIR-AP1242AG-A-K9
Regards
Ali Razayes that is what I mean. And you cannot figure out if this is happening or not. Don't rely on the wireless connection icon on windows.
It can be possible that your wireless adapters notices that the RF is busy and there were a few packet drops so it reconnects quickly. It's usually transparent to applications but if you are running a ping at that time ...
In any case, conclusion is : check your RF environment. How many APs around ? a lot of traffic ?
Nicolas
===
Don't forget to rate answers that you find useful -
Hi ,
I using windows 7 Home premium, and OS got updated yesterday night.
Then on wards, i am unable to access internet and while pinging, its giving "General Failure".
Why its happened? Is something wrong in the latest Windows 7 update?
How to resolve the issue?
Regards,
Vijay
vijai_aallaHi Vijai_aala,
Are there any error messages recorded in the Event Viewer ?
Event Viewer \Windows Logs \Application ,System ,Setup
Please also check the update history for any failed update.
We can take the folowing steps to have a troubleshoot :
1.Reinstall the network adapter driver from the device manager .It is recommended to download the driver from the manufacturer website.
2.Run the built-in troubleshoot to have a check .
Control Panel\All Control Panel Items\Troubleshooting\Network and Internet\Network Adapter,Internet Connections
3.Run the following command line to reset the TCP/IP stack.
ipconfig /flushdns (Clear the dns cache)
nbtstat -RR (release and refesh NetBIOS names)
netsh int ip reset (reset ip settings)
netsh winsock reset (Reset Winsock Catalog)
Reboot
4.If the issue persists,perform a system restore to recover the machine to a previous point .(Search system restore directly)
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Picl_initialize failed: General system failure, SUN OS 5.8 SF V440
Hi,
I am getting this error while running prtdiag -v command. On Sunfire V440 running on Solaris 5.8 OS. Please let me know what was the issue, why I am getting this error.
# /usr/platform/sun4u/sbin/prtdiag -v
picl_initialize failed: General system failure
# pkginfo -l SUNWkvm
PKGINST: SUNWkvm
NAME: Core Architecture, (Kvm)
CATEGORY: system
ARCH: sparc.sun4u
VERSION: 11.8.0,REV=2000.01.08.18.12
BASEDIR: /
VENDOR: Sun Microsystems, Inc.
DESC: core software for a specific hardware platform group
PSTAMP: on28-patch20060515055243
INSTDATE: Oct 13 2007 09:26
HOTLINE: Please contact your local service provider
STATUS: completely installed
FILES: 244 installed pathnames
52 shared pathnames
58 directories
10 executables
3 setuid/setgid executables
1652 blocks used (approx)
Thanks,If i recall all the picl/prtdiag cases i had when i worked at sun, they both came down to the following two reasons:
1. system with ancient patches
2. system with no patches
.. so i think its a good idea to start by verifying that you are up-to-date on patches. And verify that relevant processes are running..
.7/M. -
L305 Pinging v4 General Failure
I'm getting a General Failure when I ping my v4 address. This was done because my laptop will connect to my wireless modem with limited connectivity. What does this mean? What should I do next?
Hi Vijai_aala,
Are there any error messages recorded in the Event Viewer ?
Event Viewer \Windows Logs \Application ,System ,Setup
Please also check the update history for any failed update.
We can take the folowing steps to have a troubleshoot :
1.Reinstall the network adapter driver from the device manager .It is recommended to download the driver from the manufacturer website.
2.Run the built-in troubleshoot to have a check .
Control Panel\All Control Panel Items\Troubleshooting\Network and Internet\Network Adapter,Internet Connections
3.Run the following command line to reset the TCP/IP stack.
ipconfig /flushdns (Clear the dns cache)
nbtstat -RR (release and refesh NetBIOS names)
netsh int ip reset (reset ip settings)
netsh winsock reset (Reset Winsock Catalog)
Reboot
4.If the issue persists,perform a system restore to recover the machine to a previous point .(Search system restore directly)
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Ping and Tracert return General Failure
My PC resolves the hostname to the correct IP but my ping and tracert return error "General Failure." (and tracert immediately gives the error, indicating an issue with my machine).
I tried using a fix that I found through google, the command 'netsh winsock reset' but that was to no avail. I almost thought it worked as I could access the site after the restart, but this was while my applications were still loading. I refresh the page
and I get the Firefox cannot connect error.
This leads me to believe there may be some kind of fault on my configuration somewhere but I have no anti-virus nor firewall application running though I have however used Spybot's Search and Destroy immunizer tool, which includes modification to my HOSTS
file. Other than that I don't believe I have any application that could be causing an issue with site access.
I am running Windows 7 Ultimate x64 with SP1.Hi,
Firstly, please let me know which destination you tried to ping and tracert? Can you access this website using the IP address?
Meanwhile, please try the following to test the issue:
1. Register DNS via command on Windows 7:
ipconfig /flushdns
ipconfig /registerdns
2.
Reset hosts file
3. Test the issue in
Clean Boot mode to check whether this is a third party tool issue.
Hope this helps.
Vincent Wang
TechNet Community Support -
After the computer has been switched on for a while and I try to access the internet - it fails to do so and the message I get is : -General Failure - followed up by the specific address/site which it cannot open. This is happening with increasing frequency especially when I try to open email links etc. I then switch off the computer and after a few minutes or even half and hour, i reboot and it then becomes possible to open whatever was not possible before. This is quite irritating however.
Vlad
VladThank you for the suggestion and having tried it with other browsers, I can now confirm that it only happens with FF. I like FF a lot and hate to bother with other browsers but it I have to, I will most reluctantly abandon it.
By the way, having downloaded 36 of your recommended ADD-ONS, I had to get rid of them(uninstall). They not only cluttered up the start-up page but noticeably slowed down the computer. ( I left about half a dozen). Moreover, what is the point of them unless there is an icon or a button that I can click on for instant access to an ADD_ON. Instead I had to search hard to access the ones that I wanted and even then was unable to engage them. For example, I download clocks and a currency converter but was unable to use them. -
License Error: License server general failure
Hi All,
I have a very strange problem on my computer. Since this morning I cannot open SBO as I get the error License Error : 100000000 License Server General Failure. I have uninstalled the full SBO including deleted all my SBO databases and the SBO-COMMON database. I then deleted my SAP folder in Program Files, restarted my PC and reinstalled SBO... still the same error. Error is just after I click OK on the login window. License Manager seems to be working fine and license also loaded fine.
Also just wanted to say that my license did not expire (or I don't think so) as I checked my file license text file and it looks like Compatibility License for Add-ons expires 20080115 and the rest of the users 99991231.
Any help appreciated!
AdeleAdele, just try to load once again your license file
What i have done is cut a little my license file, check 'Write to log' option, and tried to load this damaged file.
What i've received is:
1. 'General error occured' message box
2. ...SBOLicense\SBOLog.txt file with the following content:
<i>---
16/08/2006 15:23:44 PollSession - User: manager1, Session: 5
16/08/2006 15:23:46 GetSystemNumber - 000000000310449963
16/08/2006 15:23:46 GetInstallationNumber - 0020180382
16/08/2006 15:23:46 GetHardwareKey
16/08/2006 15:23:46 GetHardwareKey - HK: C1742774035
16/08/2006 15:23:47 PollSession - User: manager, Session: 2
16/08/2006 15:23:50 AddLicenseFile - Start
16/08/2006 15:23:50 LoadLicenseFile - File: C:\Program Files\SAP Manage\SAP Business One ServerTools\SBOLicense\Temp.txt, pse: C:\Program Files\SAP Manage\SAP Business One ServerTools\SBOLicense\SBOLASVerify.pse
16/08/2006 15:23:50 LoadLicenseFile - Failed: Unknown error #39
16/08/2006 15:23:50 IsNewFileOK - Failed to Load License File: 39
---</i>
PS: SBOLog.txt couldn't be created. in that case check the option 'WtL', apply the settings and reopen license service setting and then try to load a license file again -
General Failure - Running DBASE App from Netware on Windows
Hi all,
Our company database is coded in DBASE 5 and is hosted on Novell Netware 6.5 servers.
Our users have always used MS DOS PC's with the novell client to run the application but recently we have began testing the application running under windows XP CMD prompt after connecting using Novell Client.
For the most part everything works however we are experiancing a problem on XP that doesn't exist when run on the MS DOS PC's.
Basically when the app tries to run the DBASE USE / FILE commands on a file that the user doesn't have access too a general failure (CANCEL, IGNORE, RETRY) is shown. Strangely if the user hits CANCEL / IGNORE the correct result is returned e.g. FILE returns .F.
The above problem doesn't occur on MS DOS!
After testing it seems that the windows PC somehow 'knows' the file is there and tries to access it and then fails - could this be the case?
Other windows commands such as DIR / MOVE etc return "A device attached to the system is not functioning"
Any ideas on any settings we can change to prevent this from happening?
Thanks
RobbieRobbiecookie101,
> Just to add to this. I have done some more checks and it definitely
> seems that the system knows there is a file there even though i have no
> rights to it. If i try to use a file in dbase file in a subdirectory i
> do not have rights to, i get the general failure error. If i do the same
> to a file that doesn't exist in the same directory then i get the
> standard file does not exist error. Is there some way that the client
> knows that there are files there even though i do not have rights to
> them and they do not show in a a dir?
The reason why you cannot access it is because another client has opened
it and has exclusive access to it. In the old days you had to flag such
files as "shareable" with the flag command, but I have not had to use that
for decades..
Anders Gustafsson (NKP)
The Aaland Islands (N60 E20)
Have an idea for a product enhancement? Please visit:
http://www.novell.com/rms -
AS2 error: IP-51083: General failure creating S/MIME digital signature
Hello All,
I am getting a failure when sending AS2 with encryption and digital signature. The certificates have been set up as follows:
Signing and Encryption for Host : Store the certificate in both wallet and repository
Signing and Encryption for TP : Store the certificate in repository.
Looks like it it finding the key but looking for "alternateWrl: /apps6/orab2b/as10gt/product/1012/ip/config/wallet/wallet1". Not sure where this wallet1 comes from?
Thanks.
2009.06.24 at 15:41:21:471: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging:SmimeSecureMessaging: sign Entering...
2009.06.24 at 15:41:21:471: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging:SmimeSecureMessaging: sign Sign using the configured certificate
2009.06.24 at 15:41:21:471: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging:SmimeSecureMessaging: sign wrl: /apps6/orab2b/as10gt/product/1012/ip/config/wallet
2009.06.24 at 15:41:21:475: Thread-40: B2B - (DEBUG) Utility:getPrivateKey:Enter
2009.06.24 at 15:41:21:503: Thread-40: B2B - (DEBUG) Utility:getPrivateKey:matching private key found
2009.06.24 at 15:41:21:503: Thread-40: B2B - (DEBUG) Utility:getPrivateKey:Exit2009.06.24 at 15:41:21:503: Thread-40: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging:SmimeSecureMessaging: sign alternateWrl: /apps6/orab2b/as10gt/product/1012/ip/config/wallet/wallet1
2009.06.24 at 15:41:21:503: Thread-40: B2B - (DEBUG) Utility:getPrivateKey:Enter2009.06.24 at 15:41:21:504: Thread-40: B2B - (ERROR) java.lang.NullPointerException
at oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging.sign(SmimeSecureMessaging.java:990)
at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.createSignedMimeBodyPart(MimePackaging.java:426)
at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.applySecurity(MimePackaging.java:1807)
at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.createMimeMessage(MimePackaging.java:296)
at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.pack(MimePackaging.java:121) at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1684)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:975)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1167)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:833)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:400)
at java.lang.Thread.run(Thread.java:534)
2009.06.24 at 15:41:21:504: Thread-40: B2B - (ERROR) Error -: AIP-51083: General failure creating S/MIME digital signature: java.lang.NullPointerException
at oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging.sign(SmimeSecureMessaging.java:1083)
at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.createSignedMimeBodyPart(MimePackaging.java:426)
at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.applySecurity(MimePackaging.java:1807)
at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.createMimeMessage(MimePackaging.java:296)
at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.pack(MimePackaging.java:121)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1684)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:975)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1167)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:833)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:400)
at java.lang.Thread.run(Thread.java:534)
Caused by: java.lang.NullPointerException
at oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging.sign(SmimeSecureMessaging.java:990)
... 10 moreHi Anuj,
I moved the setup to production and I started to get the failures. I verified and re-verified the setup. It is same as in test. I deleted and re-did the setup. However, still failing. As can be seen from the message below the matching private key is found but the encryption/signature does not happen. Again this is outbound message from host to TP. Appreciate any help.
Thanks.
2009.08.24 at 11:20:11:555: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging:SmimeSecureMessaging: setSignatureAlgorithm using algorithm name Leaving...2009.08.24 at 11:20:11:555: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging:SmimeSecureMessaging: setDigestAlgorithm using algorithm name Entering...2009.08.24 at 11:20:11:555: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging:SmimeSecureMessaging: setDigestAlgorithm using algorithm name Leaving...
2009.08.24 at 11:20:11:555: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging:SmimeSecureMessaging: sign Entering...2009.08.24 at 11:20:11:556: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging:SmimeSecureMessaging: sign Sign using the configured certificate2009.08.24 at 11:20:11:556: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging:SmimeSecureMessaging: sign wrl: /apps6/orab2b/as10gp/product/1012/Apache/Apache/conf/ssl.wlt/default
2009.08.24 at 11:20:11:562: Thread-22: B2B - (DEBUG) Utility:getPrivateKey:Enter
2009.08.24 at 11:20:11:595: Thread-22: B2B - (DEBUG) Utility:getPrivateKey:*matching private key found*
2009.08.24 at 11:20:11:595: Thread-22: B2B - (DEBUG) Utility:getPrivateKey:Exit2009.08.24 at 11:20:11:595: Thread-22: B2B - (DEBUG) oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging:SmimeSecureMessaging: sign alternateWrl: /apps6/orab2b/as10gp/product/1012/Apache/Apache/conf/ssl.wlt/default/wallet1
2009.08.24 at 11:20:11:595: Thread-22: B2B - (DEBUG) Utility:getPrivateKey:Enter
2009.08.24 at 11:20:11:599: Thread-22: B2B - (ERROR) java.lang.NullPointerException
at oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging.sign(SmimeSecureMessaging.java:990)
at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.createSignedMimeBodyPart(MimePackaging.java:426)
at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.applySecurity(MimePackaging.java:1807)
at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.createMimeMessage(MimePackaging.java:296)
at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.pack(MimePackaging.java:121)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1684)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:975)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1167)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:833)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:400)
at java.lang.Thread.run(Thread.java:534)
2009.08.24 at 11:20:11:600: Thread-22: B2B - (ERROR) Error -: AIP-51083: General failure creating S/MIME digital signature: java.lang.NullPointerException
at oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging.sign(SmimeSecureMessaging.java:1083) -
AIP-51083: General failure creating S/MIME digital signature: Error
I know you guys did answer to this kind of question in several threads. But my case is bit different. Please try to help me to resolve this issue.
OS: AIX 5.3
B2B: 10.1.2.2 (No Additions)
I did encrypt the message using certificates (Host & Trading Partner) and send to Trading Partner and got the confirmation. So assuming there is no issue with wallet and certificates.
But I am not able to sing the same message using same certificates.
(I don’t have any issue with Host certificate, I can use it for host sing but I have issue with Trading Partner certificate)
Here the error message. I really appreciate your help.
<MSG_TEXT>Error -: AIP-51083: General failure creating S/MIME digital signature: Error -: AIP-51083: General failure creating S/MIME digital signature: java.lang.NullPointerException
at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.createSignedMimeBodyPart(MimePackaging.java:434)
at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.applySecurity(MimePackaging.java:1699)
at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.createMimeMessage(MimePackaging.java:262)
at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.pack(MimePackaging.java:110)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1165)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:701)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:832)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:531)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java(Compiled Code))
at java.lang.Thread.run(Thread.java:568)
Caused by: Error -: AIP-51083: General failure creating S/MIME digital signature: java.lang.NullPointerException
at oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging.sign(SmimeSecureMessaging.java:1054)
at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.createSignedMimeBodyPart(MimePackaging.java:392)
... 9 more
Caused by: java.lang.NullPointerException
at oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging.sign(SmimeSecureMessaging.java:965)
... 10 more
</MSG_TEXT>
Thanks in Advance,
Rama KHi Anuj,
Thanks for your good reply.
I was doing same thing which you mentioned (Thats the reason encryption is working with same certificates, so there is no issue with wallet and certificates).
in my log (debug mode) I did find some thing is interesting
From the log,
<MSG_TEXT>oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging:SmimeSecureMessaging: sign alternateWrl: /oraaiad/B2BHome/Apache/Apache/conf/ssl.wlt/default/wallet1</MSG_TEXT>
Log is looking for alternateWrl "/*default/wallet1*"
But my wallet location which I mentioned in tip.props /oraaiad/B2BHome/Apache/Apache/conf/ssl.wlt/*default/wallet.txt*
I know there is no location called "*wallet1*" thats the reason why it's throwing null pointer. But my questions is, why it's looking for alternateWrl? Here some of debug log.
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2009-09-04T21:56:50.336+00:00</TSTZ_ORIGINATING>
<ORG_ID>oracle.com</ORG_ID>
<COMPONENT_ID>B2B</COMPONENT_ID>
<HOSTING_CLIENT_ID>beta</HOSTING_CLIENT_ID>
<MSG_TYPE TYPE="UNKNOWN"></MSG_TYPE>
<MSG_GROUP>B2B</MSG_GROUP>
<MSG_LEVEL>16</MSG_LEVEL>
<HOST_ID>abc.abc.com</HOST_ID>
<HOST_NWADDR>1.1.1.100</HOST_NWADDR>
<MODULE_ID>B2B</MODULE_ID>
<THREAD_ID>Thread-12</THREAD_ID>
<USER_ID>oraaiad</USER_ID>
</HEADER>
<PAYLOAD>
<MSG_TEXT>Utility:getPrivateKey:Exit</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2009-09-04T21:56:50.336+00:00</TSTZ_ORIGINATING>
<ORG_ID>oracle.com</ORG_ID>
<COMPONENT_ID>B2B</COMPONENT_ID>
<HOSTING_CLIENT_ID>beta</HOSTING_CLIENT_ID>
<MSG_TYPE TYPE="UNKNOWN"></MSG_TYPE>
<MSG_GROUP>B2B</MSG_GROUP>
<MSG_LEVEL>16</MSG_LEVEL>
<HOST_ID>abc.abc.com</HOST_ID>
<HOST_NWADDR>1.1.1.100</HOST_NWADDR>
<MODULE_ID>B2B</MODULE_ID>
<THREAD_ID>Thread-12</THREAD_ID>
<USER_ID>oraaiad</USER_ID>
</HEADER>
<PAYLOAD>
<MSG_TEXT>oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging:SmimeSecureMessaging: sign alternateWrl: /oraaiad/B2BHome/Apache/Apache/conf/ssl.wlt/default/wallet1</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2009-09-04T21:56:50.336+00:00</TSTZ_ORIGINATING>
<ORG_ID>oracle.com</ORG_ID>
<COMPONENT_ID>B2B</COMPONENT_ID>
<HOSTING_CLIENT_ID>beta</HOSTING_CLIENT_ID>
<MSG_TYPE TYPE="UNKNOWN"></MSG_TYPE>
<MSG_GROUP>B2B</MSG_GROUP>
<MSG_LEVEL>16</MSG_LEVEL>
<HOST_ID>abc.abc.com</HOST_ID>
<HOST_NWADDR>1.1.1.100</HOST_NWADDR>
<MODULE_ID>B2B</MODULE_ID>
<THREAD_ID>Thread-12</THREAD_ID>
<USER_ID>oraaiad</USER_ID>
</HEADER>
<PAYLOAD>
<MSG_TEXT>Utility:getPrivateKey:Enter</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2009-09-04T21:56:50.506+00:00</TSTZ_ORIGINATING>
<ORG_ID>oracle.com</ORG_ID>
<COMPONENT_ID>B2B</COMPONENT_ID>
<HOSTING_CLIENT_ID>beta</HOSTING_CLIENT_ID>
<MSG_TYPE TYPE="ERROR"></MSG_TYPE>
<MSG_GROUP>B2B</MSG_GROUP>
<MSG_LEVEL>16</MSG_LEVEL>
<HOST_ID>abc.abc.com</HOST_ID>
<HOST_NWADDR>1.1.1.100</HOST_NWADDR>
<MODULE_ID>B2B</MODULE_ID>
<THREAD_ID>Thread-12</THREAD_ID>
<USER_ID>oraaiad</USER_ID>
</HEADER>
<PAYLOAD>
<MSG_TEXT>java.lang.NullPointerException
at oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging.sign(SmimeSecureMessaging.java:984)
at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.createSignedMimeBodyPart(MimePackaging.java:416)
at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.applySecurity(MimePackaging.java:1734)
at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.createMimeMessage(MimePackaging.java:286)
at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.pack(MimePackaging.java:118)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1602)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:900)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1082)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:697)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:373)
at java.lang.Thread.run(Thread.java:568)
</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2009-09-04T21:56:50.506+00:00</TSTZ_ORIGINATING>
<ORG_ID>oracle.com</ORG_ID>
<COMPONENT_ID>B2B</COMPONENT_ID>
<HOSTING_CLIENT_ID>beta</HOSTING_CLIENT_ID>
<MSG_TYPE TYPE="ERROR"></MSG_TYPE>
<MSG_GROUP>B2B</MSG_GROUP>
<MSG_LEVEL>16</MSG_LEVEL>
<HOST_ID>abc.abc.com</HOST_ID>
<HOST_NWADDR>1.1.1.100</HOST_NWADDR>
<MODULE_ID>B2B</MODULE_ID>
<THREAD_ID>Thread-12</THREAD_ID>
<USER_ID>oraaiad</USER_ID>
</HEADER>
<PAYLOAD>
<MSG_TEXT>Error -: AIP-51083: General failure creating S/MIME digital signature: java.lang.NullPointerException
at oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging.sign(SmimeSecureMessaging.java:1077)
at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.createSignedMimeBodyPart(MimePackaging.java:416)
at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.applySecurity(MimePackaging.java:1734)
at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.createMimeMessage(MimePackaging.java:286)
at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.pack(MimePackaging.java:118)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1602)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:900)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1082)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:697)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:373)
at java.lang.Thread.run(Thread.java:568)
Caused by: java.lang.NullPointerException
at oracle.tip.adapter.b2b.packaging.SmimeSecureMessaging.sign(SmimeSecureMessaging.java:984)
... 10 more
</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
<HEADER>
<TSTZ_ORIGINATING>2009-09-04T21:56:50.507+00:00</TSTZ_ORIGINATING>
<ORG_ID>oracle.com</ORG_ID>
<COMPONENT_ID>B2B</COMPONENT_ID>
<MSG_ID>AIP-51083</MSG_ID>
<HOSTING_CLIENT_ID>beta</HOSTING_CLIENT_ID>
<MSG_TYPE TYPE="ERROR"></MSG_TYPE>
<MSG_GROUP>B2B</MSG_GROUP>
<MSG_LEVEL>16</MSG_LEVEL>
<HOST_ID>abc.abc.com</HOST_ID>
<HOST_NWADDR>1.1.1.100</HOST_NWADDR>
<MODULE_ID>B2B</MODULE_ID>
<THREAD_ID>Thread-12</THREAD_ID>
<USER_ID>oraaiad</USER_ID>
</HEADER>
<PAYLOAD>
<MSG_TEXT>Error -: AIP-51083: General failure creating S/MIME digital signature
at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.createSignedMimeBodyPart(MimePackaging.java:458)
at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.applySecurity(MimePackaging.java:1734)
at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.createMimeMessage(MimePackaging.java:286)
at oracle.tip.adapter.b2b.packaging.mime.MimePackaging.pack(MimePackaging.java:118)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1602)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:900)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1082)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:697)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:373)
at java.lang.Thread.run(Thread.java:568)
</MSG_TEXT>
</PAYLOAD>
</MESSAGE>
Please share your idea/comments.
I appreciate your help.
Regards,
Rama K -
I get the error message 'General Failure' when I try to get the Connection Context from the UI 6.5 using Delphi 6.
// Acquire the connection context cookie from the DI API.
Cookie := vCmp.GetContextCookie; '
Memo1.Lines.Add(SBO_Connection.Company.DatabaseName); // works fine
//Retrieve the connection context string from the UI API using the acquired cookie.
conStr:=SBO_Connection.Company.GetConnectionContext(Cookie);
This call fails.
Has anyone an idea how to solve this problem?
ThanksHi Lita,
Thanks very much for your tip.
Now the Sign-On works fine.
Regards,
Gerold -
Hello,
I have added a ChooseFromList in a matrix.
My CFL works well, but when I click on "select" to display the value in the matrix, I have a message saying "General Failure".
Aother problem is when I click on "Cancel" (in the CFL form) I have a message "Object reference not defined to an object instance".
If pVal.BeforeAction = False Then
If FormUID = "CPM" Then
oForm = SBO_Application.Forms.Item(FormUID)
Select Case pVal.EventType
Case SAPbouiCOM.BoEventTypes.et_ITEM_PRESSED
If pVal.ItemUID = "ClassGen" Then
oForm.PaneLevel = 1
End If
If pVal.ItemUID = "ClassAbon" Then
oForm.PaneLevel = 2
End If
If pVal.ItemUID = "ClassStat" Then
oForm.PaneLevel = 3
End If
If pVal.ItemUID = "AjoutL" Then
oMatrix.AddRow()
End If
If pVal.ItemUID = "SupprL" Then
oMatrix.DeleteRow(oMatrix.GetNextSelectedRow())
End If
Case SAPbouiCOM.BoAppEventTypes.aet_ShutDown
System.Windows.Forms.Application.Exit()
Case SAPbouiCOM.BoEventTypes.et_CHOOSE_FROM_LIST
oDataTable = pVal.SelectedObjects
Try
oEdit = oMatrix.Columns.Item("Nom").Cells.Item(oMatrix.RowCount).Specific
val = oDataTable.GetValue("CardName", 0)
oEdit.Value = val
oEdit = oMatrix.Columns.Item("Mail").Cells.Item(oMatrix.RowCount).Specific
val = oDataTable.GetValue("E_Mail", 0)
oEdit.Value = val
Catch
SBO_Application.MessageBox(Err.Description)
End Try
End Select
End If
End If
Do you know what my problem is ?
Thanks
ThibaultHere a sample (In C#)
if(pVal.ItemUID=="BOY_1" && pVal.EventType == BoEventTypes.et_CHOOSE_FROM_LIST) {
ChooseFromListEvent cflEvent = (ChooseFromListEvent)pVal;
string cflUID = cflEvent.ChooseFromListUID;
if(!pVal.BeforeAction) {
DataTable dt = cflEvent.SelectedObjects;
if(dt!=null && dt.Columns.Count!=0 && dt.Rows.Count!=0) {
string val = dt.GetValue("ItemCode",0).ToString();
eventForm.DataSources.UserDataSources.Item("BOY_UDS1").ValueEx = val;
Also remember that you need alphanumeric datasources (CFL doens not work with not alpha types)
Message was edited by: Rasmus Jensen -
Hi.
I have two personal email accounts feeding my Blackberry. One is a hotmail account and the other is gmail. They both worked fine up until yesterday, but then the hotmail one started to fail.
Whenever I try to send an email with this account I get a red x and it says general failure. I can still recive messages, just not reply or send new messages to anyone with this account.
My gmail account is still working completely normally. I have not made any changes to my phone except for an upgrade of the twitter app. Also I've tried taking out the battery and sim card out and rebooting.
Any help would be appraciated.Hi there!
I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
2) Delete and Resend Service Books
KB05000Delete the service book for the BlackBerry Internet Service email account from the BlackBerry smartphone
KB02830 Send the service books for the BlackBerry Internet Service
3) Batt Pull Reboot
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should try deleting and re-adding your BIS conduits for the affected email accounts.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Maybe you are looking for
-
Request Administration in GRC 10.
Dear GRC Experts, Currently, my GRC system in I have two issues in GRC AC 10 (SP 10), for which I couldn't find an answer here. Help me if you have encountered the same and solved it. 1. When we search the request, we are not able to see the approver
-
IPhoto 9.6 doesn´t display any pictures from library, upgraded
iPhoto 9.6 doesn´t display any pictures from library. I have upgraded from an old iPhoto. I upgraded the Library also. Everything is inside the Library I can see but when I run iPhoto I get only a yellow note on the screen and no pictures?
-
Phone icon on the Eris suddenly different
The 'phone' icon at the bottom of the main Eris screen is suddenly different. I'm not sure how to describe it, but it is an uneven rectangle and the ^ and the + symbols are scrunched unevenly closer to the middle. If I drag my finger across it, the o
-
I Have an iPhone 5s that i got from AT&T in May, love it and have never had a issue with it until about an hour ago my mother woke me up panicking because my Facebook had been hacked and was sending threatening messages as well as sexual picture that
-
Hello everyone, Im kaysie from belfast and have found myself in a snagg! i have been unlucky to have two laptops packin on me and given my pass word out another 3 times, hence now on my new laptop i cant authourize it, how can i get round this?