Portforwarding to multiple computers using netgear router? Is it possible?

I have a NETGEAR WRG614 wireless router,
a G5 iMac 2.0 isight (wired) which is my primary computer,
a MBP C2D 2.33 17"(wireless)
and a iBook G4 1.33ghz (wireless).
I can use iChat no problem as far as text chats go on all machines. I can video chat with all computers on my network via bonjour, and i can video chat with other people on my iMac g5 which is wired. I couldnt on any machine untill i "Port Forwarded" the ichat port on my router. my router requires that i specify a IP address for what ports to forward... i manually had to configure my TCP/IP settings on my imac G5 so that way i can use the ports and video chat (its my primary computer) now its great i can use video chat and i love it, BUT i cant video chat to anyone via my laptop i tried to give my laptop the same IP that i forwarded the ports for but i get an error saying that its in use by another machine (my iMac) i tried to create a new set of forwarded ports on my router for another IP address but i cant, my router gives me an error that the ports i want to forward are already being used for another IP. so what am i to do? I can get the laptops to video chat individually, but i have to assign the IP thats forwarded and the iMac that usually uses that IP has to be off for it to work.
sooo...
do i have to buy another router?
is there a way i can use all macs on my network and video chat?
thanks in advance!!!!
iMac G5 (iSight) 20" 2.1Ghz PPC Mac OS X (10.4.6) MBP 2.33 17" + iBook 1.33

You posted you were doing this
http://www.adiolab.com/NETGEAR/net.png
The Port Triggering setting you have would need to change.
The trigger should be Port 5678 on UDP
The In-bound ports should be 5060, 5678, 16384-16403
The single ports 5190 (both protocols), 5297, 5298 (both) and 5353 all UDP unless stated are needed to Log on to AIM and Bonjour
Also ports 5220, 5222 and 5223 on TCP are needed for the Jabber side.
(single ports equals Trigger and In-Bound)
7:05 PM Monday; February 26, 2007

Similar Messages

FCP to export thru Compressor to multiple computers using Qmaster

Hello all,
I just wanted to confirm, can you from FCP export thru Compressor to multiple computers using Qmaster?
Thanks

Sort of... you can set up a render farm using Qmaster so the files are worked on by all of your CPUs... If that's what you are talking about the answer is yes.
Jerry

Using Netgear Router - attempting to aquire WEP for additional computer

I have been using another internet provider at our previous home until yesterday when we finally got Verizon DSL here at our new home. I am using my router from my previous location and so far I have no problem with the two computers that were previously using it.
I am attempting to connect a third computer which has never had a wireless connection which means I need to obtain the WEP key from the router. I have gone thru the usual channels to obtain it but instead of getting access to Netgear, I am forwarded to Verizon's welcome page which includes "Main, My Network, etc."
I cannot either wirelessly or even being hooked directly (with my laptop) into the router, access the Netgear page which in turn will show me my WEP key under security.
It seems the 192.168.0.1 takes me directly to verizon. Any ideas?
Thanks much. MIL would REALLY like her computer up and running.
RockerWife

If 192.168.0.1 takes you to the Verizon modem/router, then try going to 192.168.1.1 for the Netgear. If you have both devices hooked up, then they probably have different IP addresses. If this fails, find your "default gateway" on one of the working computers and that should be the correct IP address.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

Is it possible for me to sync to multiple computers using an external HDD?

I just bought a 1TB external HDD and have all my music on it, as well as the installed and latest version of iTunes, as well I think I have the iTunes media file on there as well.
So using all of those things is it possible to sync my iPhone 5 to multiple computers? Like can I start syncing on my Laptop and unplug and cancel the sync and continue it on my Desktop
If there is I would imagine that it has to be either really easy or really complex. Either or I would like to know if it is possible!
If you need any more info just ask and I could provide anything that isn't personal.

Yes, if you have the entire library organized properly on the external drive then you can connect it to any computer running the same build of iTunes. See make a split library portable for details. You should also keep a backup on another drive.
See also this post.
tt2

Backup multiple computers using Time machine to a single external drive

Is it possible to backup multiple computers to a single external drive connected to an Xserve using Time machine? We have a Six TB external drive that we are connecting to an Xserve that has three drives. We want to backup the entire

Set the drive as a network share in the File Sharing section of System Preferences on the Xserve it is connected to and see if Time Capsule on the other machines can see it. If so, it should work. If you don't want the whole drive as a network share create a folder for backups on it and set that folder as a network share.

Can I sync my ipod with multiple computers using home share?

Once I homeshare all my computers, can I sync my ipod with any of them? Or do I always have to sync using the same computer.

What kind of iPod do you have?
For most iPods you can click Manually manage music on the summary page in iTunes. Check out Apple's document -> Using iPad or iPod with multiple computers.
WTH.

Can an image of Windows 2000 using NI-VXI 3.5 with a PXI-MXI controller be fielded for multiple computers using sysprep?

I am trying to field an image of Windows 2000 using NI-VXI 3.5 with a PXI-MXI controller. Can I set the system up to retain to original settings for VXI? Some of my computers use a PCI-MXI controller. Although Windows always finds the MXI controller, the original VXI System 0 is not used. I have several VME instruments set up and the target is about 85 different computers. Also the NI-GPIB interface does not show in MAX. Is this supposed to work?

Hello,
Here's an update regarding the gpib error. There has been a Corrective Action Request (CAR) ID:3BI8A578, filed due to a similar issue of error gpibpnp.exe with NI-488.2 v2.2 on Windows 2000 and Sysprep. This issue's workaround involved going back to install NI-488.2 v2.1 or installing the v2.3 release in order to eliminate the problem. Currently, NI-488.2 v2.3 is no longer available for download, however, all operating systems and hardware supported by NI-488.2 v2.3 are also supported by NI-488.2 v2.4 (see link 1).
1. NI-488.2 2.4 - Windows XP/2000: http://joule.ni.com/nidu/cds/view/p/lang/en/id/3402. GPIB Driver Versions for Microsoft Windows and DOS: http://zone.ni.com/devzone/cda/tut/p/id/5326
Best regards,
Ali M
Applications Engineer
National Instruments
Message Edited by Ali M on 05-25-2010 02:07 PM

Running a network with Time Capsule and Netgear router - is it possible?

We have an iMac and a Toshiba laptop. I was wondering if it was possible to have a wireless network with a Time Capsule and our Netgear DG834G router. We live in a solid brick house and the Netgear router is upstairs and we find we get very little, if any reception from downstairs. We have just purchased the Time Capsule and we were hoping to move the Netgear downstairs and have the Time Capsule upstairs to get reception all over the house. Is running a network like this possible, and if it is, how do we do it. Both the iMac and the laptop need to be able to connect. Thanks in advance.

g'day
you could try a pair of those http://www.amazon.co.uk/Devolo-MicroLink-dLAN-Highspeed-Starter/dp/B000A7IE7Y
see if this thread can help you in your planning http://discussions.apple.com/message.jspa?messageID=10430294#10430294

Lost connection to other computers using 'LinkSys' router

DSL modem is connected to my Linksys wireless router. I have two other computers connected using an Ethernet cable (coming from the router). Yesterday my internet (SBC-Yahoo DSL) was down for the entire day. In the past both computers connected to the router would work just fine. In fact the laptop would work either connected via the Ethernet cable or with a wireless connection. Today neither of the computers connected to the router will connect. I have not changed any of the settings on either computer. Have reset the DSL modem (turned off and back on) and have reset the router (reset button). Any suggestions on this problem?

Can you connect to the router?
Open a browser and go to 192.168.1.1
Verify the configuration options.
Also make note of the firmware version.
Then, for the moment, bypass the router and direct connect to the modem. Can you connect to internet then?
If so, check the Linksys web site to see if there is a firmware update for your router.
On my (wired) Linksys, after one of the OS updates (I forget which one) I could no longer get to internet until I updated the firmware on the router.
Since there has been an OS security update in the last week, and if you downloaded/installed it, then your problem began, its possible that is the problem.

How can I see up AppStore/Software Updates for multiple computers using the same account?

I have several computers in my household which all use the same App Store account for purchases & software updates. How can I view all those installs while not being in front of all computers?
Recently an iMac crashed from a software update. I want to see what installed & crashed it.

Launch the Mac app store on the computer you want to update.
To use your Apple ID at the Mac App Store
Choose Store > Sign In from the App Store menu.
Enter your Apple ID and password, then click Sign In.
Then redownload Lion.

Is it possible to sync PDFs with multiple computers using the same apple ID?

I have successfully synced these PDFs with one computer (iMac) and one iOS device (iPhone).
However, I can't figure out how to sync the PDFs with the second computer (Macbook Pro).
I added the PDFs to iTunes by dragging them into the books tab. I then set the iOS device to sync books via iBooks.
Does iTunes only sync books purchased from the iTunes store?
I am using iTunes v11.1 on both computers.

If you have tow computers that wish to talk to each other then no matter what Buddy List you use you will need two accounts.
If this is a List that logs into the AIM servers it can be an old @mac.com name, the newer MobileMe name or an AIM name.
With a Jabber List it can be a Jabber ID or GoogleTalk ID
In a straight forward set up Jabber Lists (Jabber ID) can not talk to AIM Buddies or An AIM Buddy List (Screen Name) talk to Jabber Buddies
9:14 PM Sunday; July 20, 2008

Delete user profiles on multiple computers using ARD

Hi Everyone,
I was wondering if there is a way to delete user profiles on all of my remote clients (250+) using ARD.
Or if anyone knows about a script which can do this and some more.
This is what I am trying to do:
I wanted to delete any user profile which exceeds the size of 300 MBs or older than 1 month.
All of my clients are Intel Macs using newest version of ARD and Leopard.
Thanks,

finding folders by size is pretty easy, modification date is a bit harder.
Here is a script that will list all user folders over 300mb.
I will leave it to you to test and modify to delete those folders.
#!/bin/bash
#list all folders larger than 300MB in /Users
#will exclude administrator and Shared
for user in $(ls -1 /Users | grep -v "Shared" | grep -v "administrator")
do
homeSize=$(du -sm /Users/$user | cut -d"/" -f1)
if [[$homeSize -gt 300]]; then
echo "/Users/$user"
fi
done

Time machine+WD mybookworld-multiple computers using time machine-possible?

Hello
i have 2 macbookpro's and a wd mybookworld 1 terabyte.
i would like to use it for backing up using time machine but for both laptops, is this possible?
thanks so much in advance

Hello and thanks very much for your help
situation:
both macbookpros are running 10.5.8 at the moment.
the drive is WD mybookworld 1 terabyte, i couldn't find whether it supports HFS or not
just found that the folders in the drive have NFS, CIFS, FTP, AFP capabilities.
1:
what i've successfully done is associate one of the laptops with the drive wirelessly and via ethernet with time machine.
How ever, when i tried to connect the second laptop (wirelessly or ethernet) it couldn't "find" the drive in time machine (under choose disk)
* [i suspect that once one computer "associates" itself with the drive another one cannot?
what can i do?]
2:
(it should be noted that i tried to remove any association the 1st computer has with the drive and followed instructions saying to delete the .backupdb- "put in trash bin and empty"
having done that still one computer can see the drive in time machine and the 2nd computer cannot.
* [question- maybe i have to delete the sparsebundle file from the WD drive as well?]
help!

Trouble w Logic on Multiple Computers - Using Same Apple ID

Hello There,
I have purchased a new iMac and already have Logic Pro 9 installed and paid for on my Macbook Pro. I want to install Logic onto my new iMac but even with the same apple ID associated, the app store only gives me the option to pay for it again? Any help? Is it not recognizing that I have already bought it with that ID? Don't want to pay again for same program when all forums say I should be able to download. Thanks.
Cobra

In the App Store, there is a tab labeled, "Purchases". Log on with the iMac, and you should be able to download it.

Confing port 3389 to access multiple computers

Hi, I need to have access to multiple computers using the RDC from windows. I can only put to work one computer at the same time . How can I enable port 3389 for more than one computer???
Thanks ,
Lilly Marin

You can try to use the port tiggering for the other IP's but I think a VPN would be better if you want to be able to access multiple PC's on your network. If your router supports a VPN then use the Quick VPN software for your router version to connect with a VPN. That will give you access to the whole network.
Richard Aichner (Ikester)

Portforwarding to multiple computers using netgear router? Is it possible?

Similar Messages

Maybe you are looking for