Portg R500 - Blue Screen and keyboard mouse are not working

Hi All,
I am using windows XP, well I was not any more due to below problem.
Laptop blue screened and now any time it goes to windows xp screen blue screen comes and reboot the system. Its not working in safe mode at all. Keyboard any mouse are not working. I cannot even go to BIOS.
I tried to plug a USB keyboard but still its same. I cannot even boot from CD.
Please could some one advise what do I need to do in order to resolve the problem.
Thanks in advance.
Nysoh

Hey,
How you can test it in safe mode if keyboard doesnt work? I mean before Windows starts you have to press F8 key and then go down to select safe mode. Therefore you need the keyboard
In your case I would try to remove the battery and AC/DC adapter for at least one hour. Then connect both devices again and make sure battery is fully charged. Start your notebook and try accessing the BIOS setup and load the default settings.
If Windows doesnt start you have to do a recovery installation I think. Some Windows files might be muddled up

Similar Messages

Hey there, my ipad had a dialogue box pop up on the screen and the buttons are not working so i cant exit out or type. PLease help me

hey there, my ipad had a dialogue box pop up on the screen and the buttons are not working so i cant exit out or type. PLease help me

Perform a Reset... Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...

My "go to in point" and "go to out point" keyboard shortcuts are not working, and the default keys arnt either? any help would be amazing!

my "go to in point" and "go to out point" keyboard shortcuts are not working, and the default keys aren't either? any help would be amazing! I use these keys a million times a hour and since I have switched to cc I cant get them to work. track selection makes no difference or if there are markers on the timeline or not.
Anyone else feel me on this?
any help?

Well that still didn't make any kind of difference. I would just do without it but I've becomes really use to it with Avid for so long. I have to admit there are a lot of small moments like this that makes me miss Avid. Any other suggestions? I have checked the keyboard shortcuts a few times and maybe I'm just missing something here...

Keyboard keys are not working

Im on mac OS X 10.6.8 several keyboard keys are not working. For instance the at symbol is not working or question mark and random other punctuation keys. The problem started after running some code from terminal to trun off mouse acceleration and then installing a plug-in to control more accurately the mouse funtions. Ive since uninstalled the plug in and disabled the adjustment in terminal. Ive checked all the normal keyboard funcions to make sure settings were not funky. When I log out and log in as a differnt user the problem with the keyboard is fixed. Someone please help
Code I ran
defaults write .GlobalPreferences com.apple.mouse.scaling -1
http://www.lockergnome.com/osx/2011/07/13/how-to-turn-off-mouse-acceleration-in- os-x/

Hello lindzthecreator,
I suggest this part of the article named One or more keys on the keyboard do not respond found here http://support.apple.com/kb/ts1381
Some keys don't work as expected
From the Apple menu, choose System Preferences.
From the View menu, choose Speech.
Click the Text to Speech tab.
If "Speak selected text when the key is pressed" is enabled, the key or key combination set to speak text cannot be used for other purposes or used to type text--click Set Key and change it to a less-commonly used key combination (try to use modifier keys such as Shift, Command, Option, and Control). Or, disable the "Speak selected text when the key is pressed" option.
Click the Universal Access pane in System Preferences, click the Keyboard tab.
Make sure that Slow Keys is turned off. With Slow Keys on, you need to press a key for a longer period of time for it to be recognized.
In the Universal Access pane, click the Mouse tab, and make sure Mouse Keys is turned off. With Mouse Keys enabled, you cannot use the Numeric Keypad to enter numbers--instead the keypad moves the pointer (cursor). (There is an option to enable Mouse Keys with five presses of the Option key; you may want to turn that option off to avoid accidentally enabling it.) If Mouse Keys is enabled and you are using a keyboard with no numeric keypad or Num Lock function, see Unable to type while Mouse Keys is enabled in Mac OS X.
If the function keys on the top row of the keyboard are not working as expected, see Mac OS X: How to change the behavior of function keys.
If the issue persists, use Keyboard Viewer to help isolate the issue:
Click the Language & Text pane (Mac OS X v10.6) or International pane (Mac OS X v10.5.8 or earlier) in System Preferences.
Click the Input Sources tab (or Input Menu tab in Mac OS X 10.5.8 or earlier).
Click the Keyboard & Character Viewer "On" checkbox to select it (click the Keyboard Viewer "On" checkbox in Mac OS X 10.5.8 or earlier).
From the Input (flag) menu, choose Show Keyboard Viewer.
If the keyboard is connected and detected by Mac OS X, the keys you type will highlight in the Keyboard Viewer window. Open TextEdit (or any text application), and try to type something using the keys that were previously not responding to see if they highlight in Keyboard Viewer.
Start from the Mac OS X Install Disc, choose Terminal from the Utilities menu and test the keys which were previously not working. If the keys work while started from the Install disc, then the keyboard itself is working correctly. Use Mac OS X: How to troubleshoot a software issue to isolate the software issue that may be causing the keys to not respond.
All the very best,
Sterling

Hello, how much did you pay when some parts of the keyboard keys are not working properly due to accidental spilt of tea?

I accidentally spilt a tea on the keyboard of my Macbook Air 11'. I managed to wipe the keyboard and saved my laptop. However, I noticed that the Spacebar, Shift and Command keys are not working as it should be. It's like something's stuck inside that makes these keys hard to press as usual. I refered this problem to Amsys, Berwick St London, as the reservations in Apple Stores are full. Do you have any idea how much is the cost for diagnosis and repair if ever?
Please help.

if you spilled a good bit of tea, its a serious problem, yes.
it got inside, and will corode, and bad things will begin to happen.
Liquid spills, why your MacBook chassis is a one-way valve for spills
After a substantial spill many people will turn their notebook upside down and shake it, not only does this not work, but it spreads liquid havoc throughout your machine and makes things often as bad as possible.
The keyboard itself acts like a one way valve in the case of a substantial liquid spill. While liquid pours into the bottom chassis easy, it does not come out easily at all, and in the case of any spill, most of it will not come out by turning it upside down. Disconnect all power and contact Apple for diagnostics and repair.
Do not attempt to, after a spill, ‘dry out your MacBook’ and test it
After a spill most people invariably try to “dry out” their notebook by various methods, including hair dryers and otherwise. This both does not work, and after a substantial spill of any magnitude, even if the liquid was water, residue is left behind.
There are additionally many very tight places inside your notebook where liquids will linger for a very long time, and cause corrosion or worse.
Immediately unplug your notebook and contact Apple for in shop diagnostics and parts replacement.
In the case of very minor spills people will “dry out” their notebook and feel success that their notebook is working ok, however invariably in nearly all instances after 4-14 days an error / fault pops up and is usually followed by more.
In case of a spill, damage estimates are impossible,.....anything can be fixed, without question.......the question is cost.
contact Apple for in shop diagnostics and cost estimation ....possible parts replacement.

HT4818 my zero and nine key are not working

my zero and nine key are not working and also //////// symbol sometimes keeps repeating

Try an external keyboard. If it works, you need a new internal keyboard.

"backspace", "g" and "h" keys are not working.

hello,
my laptop is HP 450 and windows 7.it is one years old. i haven't spilled anyting on it or damaed it in anyway i can think of.
suddenly the "backspace" , "g" and " h " keys are not working.
please help me, because i have to complete my university assignment as soon as possible.
tank you,
shehara

Hi,
While this could be a hardware issue, it's always worth trying the following.
Open windows Control Panel, open Device Manager, expand Keyboards, right click the entry 'Standard PS/2 Keyboard' and select Uninstall.
Shutdown the notebook.
Then unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f9 to load the defaults ( this is sometimes f5, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Keyboard + mouse functions not working

After updating InDesign CC 6-days ago started to have issue with all keyboard + mouse functions not working ex. shift key does not constrain proportions when scaling. A restart fixed the issue thr first time. Today I have installed latest update and shut down and restarted several times does not fix issue. On a MacBook pro running OS X Mavericks 10.9.2.

Disconnected extrenal devices ie keyboard and Wacom Bamboo tablet and restarted computer seemed to correct the issue.

HT1338 wireless keyboard letters are not working

My wireless keyboard letters are not working after i using retouch option on aperture
Thanks
Vic

superdupertyn wrote:
i left my macbook pro open for along period of time,
after i open it
What did you open if if was already opened?
As for your non-working keys, perhaps debris somehow got beneath the keys. Especially if you were eating while using your computer. Spilled anything on the keys lately or previously?
How to remove and clean your Macbook Pro Keyboard
Cleaning Macbook keys after a spill
If none of the above applies to you, you could have a hardware issue. If you have Apple Care, call them and get a case number. Otherwise, take the computer to an Apple store or an AASP. Whichever is more convenient for you.
Liquid damage is not covered under Apple's standard 1 year warranty or Apple Care.
NOTE: If you are out of warranty and purchased the computer with a credit card, discuss the warranty issue with the credit card company which you purchased the computer with. They are the only ones who can at this point cover the computer after it goes out of warranty with the manufacturer (Apple).
If you have Homeowners insurance, place a claim with them.

How to delete video from iTunes library? del and shift+del are not working - no any reaction

how to delete video from iTunes library? del and shift+del are not working - no any reaction.

seb963 wrote:
Hi
Currently, iMatch is turned off on my computer, as I do not want to upload any more songs. If I turn it on, will it upload all songs that are currently in my library? Is there another way that deleting them one by one?
You must enable iTunes Match on the new computer. The best way to accomplish what you want to do is to create a new, empty library by launching iTunes while holding down the Option key (Shift on Windows) and choosing "new library." Do not let iTunes scan for new content, but do enable iTunes Match on the empty library. Once the scan is finished you may delete tracks from the cloud. When you are done switch back to the main iTunes library.

The Keyboard clicks are not working despite the Keyboard click in settings are ON. Am using IOS 6.1.3.Pls Help me to rech this problem.

The Keyboard clicks are not working despite the Keyboard click in settings are ON. Am using IOS 6.1.3.Pls Help me to rech this problem

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

"Validation" enabled for the composite and my testsuites are not working

I have posted the below issue in Test suite in JDEV - Studio Edition Version 11.1.1.2.0 But I felt that this is the right forum, so posting this again here:
I have mediator calling bpel. Mediator is exposed as web service. Whenever I run the service using "Test" button on EM with validation turned on
then it works and the process will be completed.
But I have initiate xml in the test suites. I select "UnitTests" and select my test case xml that was associated to "Initiate Message for operation",
I see that the process is still in the "Running" state. I put in exactly the same values as I use for testing the service from EM.
Did anybody face this issue? This happens only when we turn the validation to "Enabled" in EM.
I have "Validation" enabled for the composite and my testsuites are not working. When I test using unit tests, I am only seeing "Running" status of the processes and these are not getting completed.

Hello there, RevDebMN.
The following Knowledge Base article is always a great fallback article for troubleshooting Mail issues:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Particularly useful, in your case:
Mail Connection Doctor shows one or more red dots () in the account Status column
Check your Incoming IMAP or POP and Outgoing SMTP email account settings
Use Apple's online Mail Setup Assistant to discover what the correct settings should be for both your Incoming (IMAP or POP) and Outgoing SMTP email servers. If your email service provider is not listed in the Mail Setup Assistant, visit your email service provider's website or contact their support staff to get the correct settings. You can use this "cheat sheet" when asking your email service provider about the settings you need.
After you have the correct email service provider settings, make sure Mail is configured properly.
Click here if your Incoming and Outgoing email account settings are correct, but the issue persists
What alert message is shown in the Mail Connection Doctor "Details" column affected account?
Click here if a "Could not connect to this (server type) server…" message appears
Click here if a "Trying to log in to this (email server provider name) account failed…" message or any other error message appears
If the issue persists, then you'll want to remove the account and then add it again using this article:
Mail (Mountain Lion): Remove accounts
http://support.apple.com/kb/PH11794
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

My copy and paste functions are not working, does anyone know why this might be happening?, my copy and paste functions are not working, does anyone know why this might be happening?

my copy and post functions are not working, does any one know why this may be happening and what I could do to fix it? Thanks!

Have you tried rebooting?

Got iPhone 5. Really Disappointed! After 2 days, alert and typing sounds are not working. Camera is terrible!

Bought iPhone 5. Really disappointed. Within 2 days, alert sounds and typing sounds are not working. Camera is terrible. My old HTC One S was far superior!

First, no, it is not showing orange. I checked the silent button immediately. Then I checked the sounds section of my settings, but all is good there. When I get a phone call, it rings fine. Alert and typing sounds are not working.
Second..., yes this was a technical point (in which I was hoping someone else might have had the same problem, with a solution), as well as a complaint (definitely one worth making as it is not a minor issue - it is important to hear text alerts when you have children).

Hello my battery power has a x on it and the lights are not working and its making a noise - Please assist

Hello my battery power has a x on it and the lights are not working and its making a noise - Please assist

The Battery icon with the "X" indicates that your computer does not detect a battery and is operating on electrical power from AC since your computer is plugged in. If your battery is installed but not detected that indicates a problem: 1. the battery is dead; 2. the battery connector is not functioning properly. You mention that there is no response from the indicator lights so it could be either of the two possibilities. The noise is not a good sign. Best to shut it down safely while you can to prevent any possibility of damage and get it to an Apple Genius Bar or Authorized Apple Service Provider to discover the nature of the problem

Portg R500 - Blue Screen and keyboard mouse are not working

Similar Messages

Maybe you are looking for