Portlet Customizations - Oracle BI 10g (Discoverer + Portal)

on Portal, Discoverer Portlet, how to remove dotted line after worksheet / gauges ???

Hi, I intend to enroll for the Oracle BI 10G course, and need to study and see what are the eligibility criteria for it?
Would appreciate if you can get back directly on my email [email protected]
Intending to enroll and study for this . Thanks for your help
Abhishek

Similar Messages

Tutorials needed for cloning portlets on oracle AS 10g portal server

hi,
i'm using oracle AS 10g portal server (ver 10.1.4). I'm relatively new to oracle as server.
I have a requirement for cloning portlets and using them in an all together differrent portal.
Wud like to have some knowledge abt this.
thanks

hi,
i'm using oracle AS 10g portal server (ver 10.1.4). I'm relatively new to oracle as server.
I have a requirement for cloning portlets and using them in an all together differrent portal.
Wud like to have some knowledge abt this.
thanks

Error Running Reports as Portlet in Oracle AS 10g

#First, I create the report server using Reports Server Access Portlet (Administration> Oracle Reports Security Setting)
When defining the Server Name and Printers, I fill the fields like this:
Display Name : MY_REPORTS_SERVER
Reports Server Name : myserver
Oracle Reports Web Gateway URL for JSP reports : http://stts:7778/
Oracle Reports Web Gateway URL for RDF reports : http://stts:7778/reports/rwservlet
#Second, I create the report definition using Reports Definition File Access portlet
Display Name : myreport
Reports Servers : MY_REPORTS_SERVER
Oracle Reports File Name : test.rdf (default report sample)
Execute : via servlet
#The problem is.....
When I tried to run the report by clicking Run / Run as Portlet link, the report doesn't show up.
Then, I rightclick-View Page Source on the page
<iframe name="iFramePortlet"
src="http://sttsstts/reports/rwservlet?report=test.rdf&server=myserver&destype=Cach....
I found that the src tag is doubling my computername into sttsstts, it supposed to be stts only.
How come this happen???
I already tried to change server definition into
Oracle Reports Web Gateway URL for JSP reports : http://localhost/
Oracle Reports Web Gateway URL for RDF reports : http://localhost/reports/rwservlet
but the when tried to run the report again, the src still added by computername become:
src="http://localhoststts/reports/rwservlet?report=test.rdf&server=myserver&destype=Cach............
plaease help me...
Thanx before,
Chris

Hi,
I found two Metalink Notes that could of use to you :-
Metalink Note:230544.1 :- How To Install And Configure OSA AS Portlets (Main Document)
Metalink Note:247595.1 :- Installing AS Portlets 1.0 with OFA or OSA Version 6.4
Regards,
Sandeep

Problem in accessing ADF Faces Table portlet in Oracle 10.1.4 portal server

I created one ADF Faces Portlet ,showing a simple table in 10.1.3.1
When i do run from Jdevloper it works fine.
But after registering it as WSRP in oracle portal server 10.1.4 ,when i am adding this portlet in a page ,it is giving javasript error.
I am not able to figure out problem.
Any help will be appreciated.
Thanks in Advance....

It is giving error in this line.
addJSL("http://ipaddess/portal/page/portal/TEST/COMPANY/test82?mode=16&_rtarget=36_14157_36_14154_14154&_piref36_14157_36_14154_14154.__ora_type=proxy&_piref36_14157_36_14154_14154.__ora_resource=http%3A%2F%2Fisaha%3A8888%2FListAll3%2Fportletresource%2FC%253A192.168.11.162%253A-ce9ef7a%253A12214125dd4%253A-7ffe%2FS%253A192.168.11.162%253A-ce9ef7a%253A12214125dd4%253A-7ffc%253AE%253A0%253A192.168.11.162%253A-ce9ef7a%253A12214125dd4%253A-7ffd%2Fadf%2FjsLibs%2FCommon10_1_3_2_0.js"
But instead of http:// if it is http://// It is ok.But is is generated by Portal server.
Do I need to install any patch.
Any help will be appreciated.
Thanks in advance ......

Migeration of Portlets from Plumtree 5.0 to Oracle WebCenter 10g

Hello
We need to migrate portlets in “Oracle WebCenter 10g RC3” from “Plumtree 5.0”. Till now we are using “Plumtree 5.0” and “.Net 1.1” for development of portlets.
My question is:
is it possible to run all existing portlets directly (Without any change) on “Oracle WebCenter 10g RC3” or should we have to made some changes in code of all existing portlets (“Plumtree 5.0”) to run on “WebCenter 10g RC3”
I will appreciate any kind help/information in this regard.
Thanks in advance
Mohit
Edited by: user10880353 on Feb 2, 2009 10:00 PM
Edited by: user10880353 on Feb 2, 2009 10:01 PM

It is not possible to migrate portal objects from 5.0 to 10g3 or for that matter, any different versions. While migrating, the source and target installation versions should be the same. This is a PREREQUISITE.
I guess what you are trying to do is to upgrade your Plumtree 5.0 to Oracle WebCenter Interaction 10gR3. This is not directly possible. You will have to do at least 4 intermediate upgrades: 5.0 to 6.0 to 6.1 to 6.5 to 10gR3 (This is not accurate. Please go to edocs.bea.com/alui and go through the upgrade guides for the different versions)
Please do not confuse between Oracle WebCenter and Oracle WebCenter Interaction. The new name of the Plumtree portal / AquaLogic User Interaction is Oracle WebCenter INTERACTION and this product has been included in the Oracle WebCenter family. There were other member products pre-existing in Oracle WebCenter Product suite and as of now, applications referred to as Oracle WebCenter applications do not actually include OWC Interaction applications. Going forward, these technologies will converge/made interoperable and more combatible.
I guess you must have realized by now why your question had not evoked much interest here: Wrong Forum :D Please post your queries in Forum Home >> User Interaction and Content Management >> WebCenter Interaction and not in WebCenter Suite - Framework.

Migration of ADF 10g application to ADF 11g(Portlet Customization Error)

Hi,
Currently we are doing a migration of ADF/Webcenter 10g appication to 11g(11.1.1.6) and in the current 10g application portlet is used which contains the file based content and can be customized using a specific role say(admin).
We have almost done the migration using the Jdeveloper 11.1.1.6 and most of the pages along with the portlet content are coming similar to the 10g look and feel but whenever we want to do portlet customization using the specific role we are getting the below exception. The content is file based system and the details of the versions are as below
10g Environment:
OC4J version. Oracle Containers for J2EE 10g (10.1.3.5.0)
JDK version- java version "1.5.0_06"
Webcenter and it’s version : Webcenter 10g(10.1.3.5.0)
ADF version. Oracle ADF 10g
Jdeveloper 10.1.3.3.0
11g Environment: Currently I am using Jdeveloper 11.1.1.6 with Integrated weblogic server
webcenter extension used: oracle.webcenter.framework_bundle/oracle.webcenter.customization_bundle
Error which I am getting during portlet customization:
[2013-02-20T14:47:42.162+05:30] [DefaultServer] [ERROR] [] [oracle.portlet.binding] [tid: [ACTIVE].ExecuteThread: '14' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: portaladmin] [ecid: 39e706a46ad531be:31f43ddc:13cf6ad5231:-8000-0000000000000386,0] [APP:TEST_DEV#V2.0] An error has occured for Portlet Binding portlet3.[[
java.lang.NullPointerException
at oracle.adfinternal.model.portlet.binding.PortletModelImpl.getRequireIframe(PortletModelImpl.java:907)
at oracle.adfinternal.model.portlet.binding.ActivityPortletModelWrapper.getRequireIframe(ActivityPortletModelWrapper.java:71)
at oracle.adf.model.portlet.binding.PortletBinding.prepareRenderPhase(PortletBinding.java:455)
at oracle.adf.model.portlet.binding.PortletBinding._refresh(PortletBinding.java:377)
at oracle.adf.model.portlet.binding.PortletBinding.refresh(PortletBinding.java:969)
at oracle.adf.model.binding.DCBindingContainer.internalRefreshControl(DCBindingContainer.java:3273)
at oracle.adf.model.binding.DCBindingContainer.refresh(DCBindingContainer.java:2876)
at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.prepareRender(PageLifecycleImpl.java:561)
at oracle.adf.controller.faces.lifecycle.FacesPageLifecycle.prepareRender(FacesPageLifecycle.java:82)
at oracle.adf.controller.v2.lifecycle.Lifecycle$9.execute(Lifecycle.java:224)
at oracle.adfinternal.controller.lifecycle.LifecycleImpl.executePhase(LifecycleImpl.java:197)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.access$1000(ADFPhaseListener.java:23)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$5.before(ADFPhaseListener.java:402)
at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.beforePhase(ADFPhaseListener.java:64)
at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.beforePhase(ADFLifecyclePhaseListener.java:44)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:352)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:222)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:266)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.portlet.client.adapter.adf.ADFPortletFilter.doFilter(ADFPortletFilter.java:32)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.webcenter.framework.events.dispatcher.EventDispatcherFilter.doFilter(EventDispatcherFilter.java:44)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.wcps.client.PersonalizationFilter.doFilter(PersonalizationFilter.java:75)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.webcenter.content.integration.servlets.ContentServletFilter.doFilter(ContentServletFilter.java:168)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:179)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.webcenter.lifecycle.filter.LifecycleLockFilter.doFilter(LifecycleLockFilter.java:151)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Any hellp or suggestion will be helpful for me to resolve this issue.
Thanks in Advance
Chetan

Hi,
given its a WebCenter question, you want to post it to the Webcenter forum: WebCenter Portal
Frank

Deploying Jave portlet on Oracle Application Server 10g

I have installed Oracle 10g Application server, donwloaded and installed JDevleoper 9.0.5.1 and the latest Java Portal Development and as well as the JDeveloper portlet-addin. Now, I followed the instructions from the http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/PDK/ARTICLES/BUILD.JSR168.PORTLETS.USING.JAVA.PORTLET.WIZARD.9IJDEVELOPER.HTML
On using JDeveloper addin wizrd to create a java portlet and so far so good. However, I am stuff on the last bit on deployment. It document says "# Now use the URL provided in the log page at the bottom of JDeveloper to get part of your URL (e.g. http://myserver.uk.oracle.com:8888/my-portlet) and complete the URL.
http://myserver.uk.oracle.com:8888/my-portlet/portlets?WSDL
Now use this URL to register your portlet with OracleAS Portal.
But when i deploy my application (just a test thing), from the deployment tab I get:
---- Deployment started. ---- 22-Mar-2005 14:11:27
Target platform is Oracle Application Server 10g (hotseatConnection).
Wrote WAR file to C:\work\oracle\MyProject\MyPortlet\deploy\hotseat.war
Wrote EAR file to C:\work\oracle\MyProject\MyPortlet\deploy\hotseat.ear
Invoking DCM servlet client...
C:\Java\j2sdk1.4.2_03\jre\bin\javaw.exe -Djava.protocol.handler.pkgs=HTTPClient -jar C:\Java\JDeveloper9.0.5.1\jdev\lib\oc4j_remote_deploy.jar http://194.83.41.114:1811/Oc4jDcmServletAPI/ ias_admin **** redeploy /u01/app/oracle/product/10.1.0/oraMid_904 C:\work\oracle\MyProject\MyPortlet\deploy\hotseat.ear hotseat
Initializing log
Servlet interface for OC4J DCM commands
Command timeout defined at 600 seconds
Executing DCM command...
Executing command redeploy /u01/app/oracle/product/10.1.0/oraMid_904 C:\work\oracle\MyProject\MyPortlet\deploy\hotseat.ear hotseat UNDEFINED
Command = REDEPLOY
Reading application's ear file
Ear file was successfully read
Opening connection to Oc4jDcmServlet
Setting userName to ias_admin
Sending command to DCM servlet
HTTP response code = 200, HTTP response msg = OK
Command was successfully sent to Oc4jDcmServlet
Receiving session id from servlet to check command status
Session id = c253297271317c3f930003c405ea91ff598582f0be0
Please, wait for command to finish...
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=c253297271317c3f930003c405ea91ff598582f0be0
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has finished
Receiving command exit value
Receiving command output
**** No output was received from command
Closing connection to Oc4jDcmServlet
DCM command completed successfully.
Output:
Exit status of DCM servlet client: 0
Elapsed time for deployment: 1 minute, 45 seconds
---- Deployment finished. ---- 22-Mar-2005 14:13:12
My question is, HOW DO I ACCESS the deployed application, since it didn't specify the URL where it's deployed????
Many thanks
P/S
I have tried:
http://{myserver}:8888/{my-portlet}/portlets?WSDL but that doesn't work

Hi FormsEleven,
When you say you can do this or you have done for demo then considering following directory structure if I have two forms having common form names how it will be resolved?
Or how the url to access these forms will be?
As shown in the following structure consider we have Form1 in sub directory1 as well as in sub-directory2 then how the link to access these forms will be?
- Hosting Directory (formsweb.cfg entry)
- Sub Directory1
      - Form1
      - Form2
- Sub Directory2
      - Form1
      - Form4
- Sub Directory3
      - Form5
      - Form6

Problem configuring the OBIEE Report Viewer Portlet to Oracle Portal!

Now we plan to configure the OBIEE Report Viewer Portlet to Oracle BIEE.what i refre is http://www.rittmanmead.com/2007/09/integrating-oracle-bi-answers-and-oracle-portal/
But after i deploy it and add the biee portlet to oracle portal and enter the biee reoprt path,tell me the error '(500)Internal Server Error '
I have check the applicaion.log,the error below:
11/12/18 00:55:26 BIEE: [id=84609988305,3] EXCEPTION THROWN: Exception:
org.apache.axis.ConfigurationException: No service named SAWSessionServiceSoap is available
org.apache.axis.ConfigurationException: No service named SAWSessionServiceSoap is available
at org.apache.axis.configuration.FileProvider.getService(FileProvider.java:233)
at org.apache.axis.AxisEngine.getService(AxisEngine.java:311)
at org.apache.axis.MessageContext.setTargetService(MessageContext.java:755)
at org.apache.axis.client.Call.invoke(Call.java:2671)
at org.apache.axis.client.Call.invoke(Call.java:2424)
at org.apache.axis.client.Call.invoke(Call.java:2347)
at org.apache.axis.client.Call.invoke(Call.java:1804)
at com.siebel.analytics.web.soap.SAWSessionServiceStub.impersonateex(SAWSessionServiceStub.java:540)
at com.siebel.analytics.web.portlets.jsr168.SAWConnection.init(SAWConnection.java:80)
at com.siebel.analytics.web.portlets.jsr168.ReportUI.getSAWConnection(ReportUI.java:911)
at com.siebel.analytics.web.portlets.jsr168.ReportUI.getSAWPage(ReportUI.java:1016)
at com.siebel.analytics.web.portlets.jsr168.ReportUI.doViewIFrameWithActionLinks(ReportUI.java:428)
at com.siebel.analytics.web.portlets.jsr168.ReportUI.doView(ReportUI.java:178)
at javax.portlet.GenericPortlet.doDispatch(Unknown Source)
at com.siebel.analytics.web.portlets.jsr168.ReportUI.doDispatch(ReportUI.java:1058)
at javax.portlet.GenericPortlet.render(Unknown Source)
at oracle.webdb.wsrp.server.Server.getMarkup(Unknown Source)
at oracle.webdb.wsrp.WSRP_v1_Markup_PortType_Tie.invoke_getMarkup(WSRP_v1_Markup_PortType_Tie.java:224)
at oracle.webdb.wsrp.WSRP_v1_Markup_PortType_Tie.processingHook(WSRP_v1_Markup_PortType_Tie.java:499)
at com.sun.xml.rpc.server.StreamingHandler.handle(StreamingHandler.java:230)
at com.sun.xml.rpc.server.http.ea.JAXRPCServletDelegate.doPost(JAXRPCServletDelegate.java:153)
at com.sun.xml.rpc.server.http.JAXRPCServlet.doPost(JAXRPCServlet.java:69)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ResourceFilterChain.doFilter(Res
ourceFilterChain.java:65)
at oracle.webdb.wsrp.server.ContextFilter.doFilter(Unknown Source)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.invoke(
ServletRequestDispatcher.java:663)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.forward
Internal(ServletRequestDispatcher.java:330)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.processReques
t(HttpRequestHandler.java:830)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.run(AJPRequest
Handler.java:224)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.run(AJPRequest
Handler.java:133)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].util.ReleasableResourcePooledExecutor$MyWork
er.run(ReleasableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:534)
at org.apache.axis.configuration.FileProvider.getService(FileProvider.java:233)
at org.apache.axis.AxisEngine.getService(AxisEngine.java:311)
at org.apache.axis.MessageContext.setTargetService(MessageContext.java:755)
at org.apache.axis.client.Call.invoke(Call.java:2671)
at org.apache.axis.client.Call.invoke(Call.java:2424)
at org.apache.axis.client.Call.invoke(Call.java:2347)
at org.apache.axis.client.Call.invoke(Call.java:1804)
at com.siebel.analytics.web.soap.SAWSessionServiceStub.impersonateex(SAWSessionServiceStub.java:540)
at com.siebel.analytics.web.portlets.jsr168.SAWConnection.init(SAWConnection.java:80)
at com.siebel.analytics.web.portlets.jsr168.ReportUI.getSAWConnection(ReportUI.java:911)
at com.siebel.analytics.web.portlets.jsr168.ReportUI.getSAWPage(ReportUI.java:1016)
at com.siebel.analytics.web.portlets.jsr168.ReportUI.doViewIFrameWithActionLinks(ReportUI.java:428)
at com.siebel.analytics.web.portlets.jsr168.ReportUI.doView(ReportUI.java:178)
Then i goolge,and find the likely error at https://kr.forums.oracle.com/forums/thread.jspa?threadID=875397
But after i change the portlet.xml and web.xml and restart the oc4j_portal,still face the same error
I don't know how to resolve the problem
Anyone can help me ?
I have wait about 15 days,but still can not find any useful solution!
'

the web.xml under oc4j_portal/portal below:
$ more web.xml
<?xml version="1.0"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.2//EN" "http://java.sun.com/j2ee/dtds/web-app_2_2/dtd">
<web-app>
<distributable/>
<listener>
<listener-class>oracle.webdb.portal.servlet.PortalServletContextListener</listener-class>
</listener>
<servlet>
<servlet-name>RepositoryServlet</servlet-name>
<servlet-class>oracle.webdb.repository.servlet.RepositoryServlet</servlet-class>
<init-param>
<param-name>logmode</param-name>
<param-value>error</param-value>
</init-param>
</servlet>
<servlet>
<servlet-name>PortalServlet</servlet-name>
<servlet-class>oracle.webdb.portal.servlet.PortalServlet</servlet-class>
<init-param>
<param-name>logmode</param-name>
<param-value>error</param-value>
</init-param>
</servlet>
<servlet>
<servlet-name>page</servlet-name>
<servlet-class>oracle.webdb.page.ParallelServlet</servlet-class>

<init-param>
<param-name>jspRoot</param-name>
<param-value>internal_jsp</param-value>
</init-param>
<init-param>
<param-name>jspSrcAlias</param-name>
<param-value>/internal_jsp/</param-value>
</init-param>
<init-param>
<param-name>useWebCache</param-name>
<param-value>true</param-value>
</init-param>
<init-param>
<param-name>maxParallelPortlets</param-name>
<param-value>20</param-value>
</init-param>
<init-param>
<param-name>maxParallelPagePortlets</param-name>
<param-value>10</param-value>
</init-param>
*<init-param>*
*<param-name>resourceUrlKey</param-name>*
*<param-value>0123456789</param-value>*
*</init-param>* </servlet>
<servlet>
<servlet-name>apploader</servlet-name>
<servlet-class>oracle.webdb.apploader.AppLoaderServlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>PortalServlet</servlet-name>
<url-pattern>/pls/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>PortalServlet</servlet-name>
<url-pattern>/page*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>PortalServlet</servlet-name>
<url-pattern>/event*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>PortalServlet</servlet-name>
<url-pattern>/witness/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>apploader</servlet-name>
<url-pattern>/apploader</url-pattern>
</servlet-mapping>
<context-param>
<param-name>oracle.webdb.service.ConfigLoader</param-name>
<param-value>/WEB-INF/wwjps.xml</param-value>
<description>This parameter specifies the location of the JPS configuration file</description>
</context-param>
<context-param>
<param-name>oracle.webdb.portal.PortalServletContextListener.logmode</param-name>
<param-value>error</param-value>
<description>This parameter specifies the logging mode for the context listener</description>
</context-param>
</web-app>
$

Oracle Aplication Server Portal 10 G - configure portlets in Oracle Portal

Hi, I was reading through the Document " ORACLE APPLICATIONS SERVER PORTAL 10G release 2 (10.1.4 - Customized Portlets with BPEL.
On page 3 it refers to chapter 20 of a document caled "BEPL 10.1.2.0.2 Developer's Guide".
I couldn't find this document. It is supposed to teach youhow to configure out-of-box portlets in Oracle Portal.
Thanks

Hi Sleepy,
you can find this chapter here: http://download-uk.oracle.com/docs/cd/B14099_19/integrate.1012/b14448/portal.htm#sthref3420.
How to find it? http://otn.oracle.com -> documentation -> application server -> Oracle Application Server 10g Release 2 (10.1.2.0.2) Documentation (Previous Releases section) -> View Library for B14099-11 and finally E-business Integration tab contains BPEL guides.
Regards,
Ivan

Oracle Discoverer / Portal

Hi,
I should know the answer to this question but during my recent adventures I have become confused by various product offerings.
We currently use Oracle Reports and Oracle Discoverer for various reporting requirements. We are missing a publishing option and naturally we think Portal could fit the bill. However, SSO is a bit of a nightmare so we would like to bypass this and just use basic user authentication i.e. user enters username & password.
Can Portal be used in this way? If so, how? Can anyone point me in the direction of a white paper or configuration guide?
Many thanks,
Rhys David

Hi Rhys David
Don't be wary of Portal and its interaction with Discoverer. Until the acquisition by Oracle of Siebel and the introduction of what is now called OBIEE, the Discoverer / Potral combination was Oracle's flagship reporting mechanism. It works very well and you can produce excellent dashboards. If you have no budget or need for linking with BI Publisher then this is the way to go. If you have a full 10g Application Server complete with metadata repository (affectionately known as the Infrastructure) then Portal is already included at no further charge. If you only have a stand-alone Discoverer then you will need to upgrade to the full application server, install the metadata repository and link Discoverer to it. The latter will mean an additional fee to get the appropriate license.
By the way, Oracle Portal development is not typically for the faint hearted and I would recommend you have someone get really familiar it, maybe even taking one of Oracle's courses.
While my company offers what some consider to be among the best Discoverer training we don't offer Portal training. The Oracle Education classes for Portal are really excellent and worth the money. I know because I have attended them.
Best wishes
Michael

Oracle 10g discoverer and report services installation issue

Hi
Could some one help me in finding the solution for the problem while installing oracle 10g discoverer and report services installation ..
at configuration assistants the opmn configuration failed..
could some one suggest the possible solution for this problem.
thanks

at configuration assistants the opmn configuration failed..additional clues may exist within log file.
Edited by: sb92075 on Aug 29, 2010 7:19 PM

Oracle DB 10g and BI Discoverer for OLAP - Dimension Attributes

Hi,
We are using Oracle Database 10g release 1 with partitioning, data mining and OLAP options and Analytic Workspace Manager 10.2.0.1.0A to create the multidimensional objects. For the user dimensions created using AWM we have custom attributes like HireDate, StartDate, Sales Personnel Role etc., For reporting purposes we are using Discoverer for OLAP. In this Discoverer version, I don't see an explicit provision to drag these attributes onto the worksheet. We are only able to filter based on these attributes and capture the measures...
Can someone throw light on this? Also, if there is a possibility to drag these attributes onto the worksheet can that be expounded?
Thanks in advance!

Again this depends on what you are trying to achieve. If you define an attribute against a dimension it takes very little space as it is not directly connected to a cube and so no data is stored against that attribute.
If, however, you have a 4D revenue cube (product, geography, channel, time) with products attributes COLOR and PACK SIZE and you want to view revenue additionally borken-out by COLOR and PACK SIZE as well as the other four dimensions then your schema will require additional storage space. However, 10g compressed cubes and sparsity options do help to manage the explosion of data points as the number of dimensions increases. This should allow you to easily add attributes as dimensions into your cube.
One thing to remember is that most users start to struggle when confronted with more than 9 dimensions. So although Oracle OLAP can create extremely large dimensional models, users prefer their cubes to have 9 or fewer dimensions.
Hope this helps,
Keith
Oracle Business Intelligence Product Management
BI on Oracle: http://www.oracle.com/bi/
BI on OTN: http://www.oracle.com/technology/products/bi/
BI Beans http://www.oracle.com/technology/products/bib/index.html
Discoverer: http://www.oracle.com/technology/products/discoverer/
BI Software: http://www.oracle.com/technology/software/products/ias/devuse.html
Documentation: http://www.oracle.com/technology/documentation/appserver1012.html
BI Samples: http://www.oracle.com/technology/products/bi/samples/
Blog: http://oraclebi.blogspot.com/

Register the Oracle 9iFS Portlet with Oracle Portal

I did register the Oracle 9iFS Portlet with Oracle Portal.
But when I am adding the portlet to a portal page I get the error:
"500 Internal Server Error"
When I am trying to access the page by url:
http://<myserver>:7777/ifs/portlet
I get the error:
"You are not authorized to view this page"

not a problem with BEA , just means your database has been configured to close your session after a period of inactivity(which is normal).
Check you connection pool testing settings and tune accordingly.

How to install Oracle Apps Server (Discoverer 10g)

Dear All,
Can you tell me from where I can find the steps of installation and config or Oracle Application Server 10g (Discoverer 10g).
Aqeel Nawaz

Hi,
Refer the below link:
http://download-uk.oracle.com/docs/cd/B14099_17/bi.htm
http://www.oracle.com/technology/pub/articles/smiley-as10gr3-install.html
Regards,
Xaheer

Installing the Oracle JDeveloper 10g Portal Extension

i have followed all the steps to install jdev portal extension but i am not able to see Java Portlet and Oracle PDK Java Portlet portlets in web tier..what could be the reason

Hi,
Did you notice any errors during the installation ? i.e, when you install the Portal Addin Jar File..
Regards,
Sandeep

Portlet Customizations - Oracle BI 10g (Discoverer + Portal)

Similar Messages

Maybe you are looking for