Portlet will not post back after first time

I have a portlet that is using WC 2.2 in version 5.0.4 of the portal. The portlet renders fine and posts back fine the first time. Subsequent clicks on any button requiring a postback go nowhere (just the cursor displaying as an hourglass). No request is made to the web server so it must be hung up in the postback javascript somewhere. Has anyone experienced this issue before. Thanks in advance.

Then I don't know. In these situations I use Visual Studio to attach to IE and do client-side debugging. It's a bit tricky, but doable. Then you can trace where it goes after the second click (if anywhere). Unless someone had the same problem and knows the answer...
Although, we did have a very similar problem where second post back did not work (it would freeze with a hourglass). In our case it was because PTWC 2.2 can't handle large viewstates generated by a data grid. When we disabled the view state, it worked.
Ruslan.

Similar Messages

  • E550 will not come back after hibernation/sleeping mode

    Thinkpad E550 will not come back after hibernation/sleeping mode. please help. I just bought this garbage laptop about 1 month ago. the big issue is the laptop will not come back after sleeping. I often run some calculation for some hours, the laptop always goes sleeping and wont come back. I had to power off the laptop and re-started it again. All of my calculation results  were gone. Lenovo support is very bad, I already submitted a service ticket 2 weeks ago, but nobody contacted me. Lenovo laptops are garbage. I will not buy it anymore. Anyone can help? thanks a lot!

    HI Clare,
    In the Toshiba Power Management utility you should click on the 'advanced' tab and about half way down the resultant window you should see an option for the action to be taken when you close the lid of your SA30.
    Make sure that this is set to 'hibernate'. Then go to the power save modes and click on the 'details' tab and then the 'Power Save Mode' tab and make sure that the 'Hibernate' option is set to 'never'.
    With these settings your notebook should go into 'hibernate' when you close the lid but not at any other time.
    Note that you can set the notebook to hibernate when running on battery when the bttery capacity reaches a pre-set value of your own choosing.
    regards,

  • HT1338 Mac mini display connection will not come back after sleep, I have to shut down and restart the monitor.

    Mac mini display connection will not come back after sleep, I have to shut down and restart the monitor.

    Finder icon on dock, macintosh hd, library, launch agent - delete all files & restart sleep to test
    also
    Finder icon on dock, macintosh hd,
    Library/Preferences/SystemConfiguration/com.apple.PowerManagement.plist
    delete file & restart sleep to test.

  • HT1386 i update my phone to is06.01 and my music will not come back after i svnc

    i have update my iphone 4s to is06.0.1 and after i sync my music will not come back has any one had this problem

    Is the music in the iTunes library on your computer?

  • I Chat will not start for the first time on my Macbook Pro after Migration

    Hi hope someone can help as this problem has stumped me. I cannot get ICHAT to even start having migrated all applications via Migration Assistant from a Macbook to a Macbook Pro. Everything else seems to work fine except when I run ICHAT and follow setup I get to a final screen which locks without showing a DONE button to complete the setup process! I have reloaded OS X, downloaded the OS X Combo OSand tried that, deleted the app and started again just in case but to no avail. Can anyone help? The application worked fine on the old Macbook but not on this machine.

    Hi,
    Welcome to the    Discussions
    Please tells us which version of iChat was moved to the new computer ?
    What OS is the new computer at otherwise ?
    I would guess you will have to do th Hard way
    http://discussions.apple.com/thread.jspa?threadID=1486891&tstart=0
    and include the Support folders in any Reinstall
    Please note the Post time I add to my post as it may be some time before I post again.
    10:58 PM Wednesday; September 2, 2009
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • MacBook will not start up after first startup session

    I absolutely have no idea what is going on. I have the most updated version of Snow Leopard for my '09 MacBook. I've done every trick in the book that came with my MacBook and even done the Hardware Test. I make it past the white screen with the apple, but as soon as the second start begins it just continues to stay blue. One thing I've noticed is when I hold down the C key (I believe it's that one) and have the Mac Os X disc installed, a giant lock pops up, but I have no clue what it's for. If it's a master password I definitely don't remember. Any ideas?

    That lock is for a Firmware Password or a Master Password if you have FileVault enabled. You will need to get past that in order to do anything such as repair the drive or reinstall Snow Leopard.
    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

  • FireFox will not work from a first time install

    Question
    Loaded firefox for the first time, installation complete, icon on desktop, program tries to open when clicked as the hourglass icon is visible for a moment, then nothing happens. I watch the process tree, firefox is visible for a moment then disappears, followed by drwtsn32 momentarily.

    I called the state's technical support and was informed:
    1) That it is a hit or miss possibility for Safari and Firefox to work properly with this site; and,
    2) That the site is optimized to operate with Internet Explorer for Windows.
    There is your answer. Many US Government sites are the same - they simply WILL NOT follow the necessary web standards to make them Apple and/or Safari compliant.
    The only thing you can try is to go to Safari's Develop Menu and try using Internet Explorer as the User Agent.

  • OFFICEJET 4622 WILL NOT PRINT WIRELESSLY AFTER MULTIPLE TIME TRING TO INSTALL mutiple times

    My printer will not print wirelessly. I see that it is installed and the firewalls are turned off but it will not print

    Hello phdavid53,
    Welcome to the HP Forums!
    I understand your Officejet 4622 will not print wireless. I will do my best to assist you! First, I would like to ask you a couple of questions to clarify: When you installed this printer on your computer, were you able to print a document? Did the installation state it had a successful wireless connection? 
    I would recommend following this entire HP document on Printer Does Not Maintain Wireless Connection.
    What is your operating system on your computer? Windows or Mac?
    If you were never able to install this printer over a wireless connection through the software, then please follow this HP document on 'Unable to Find Printer' Error Message Displays on the Computer During a Wireless Network Installati.... I will be looking forward to hearing from you. Have a great night!
    I worked on behalf of HP.

  • G4 Will not Boot Up after Quick Time 7.1.6 Upgrade

    I upgraded the most recent Quicktime update last night and opted for System Shutdown afterward. This morning the machine will not boot up. It goes to the Apple and the swirling circle for up to a half hour - still no luck.
    Any ideas?
    iMac G4   Mac OS X (10.4.9)  

    Are you sure it was just the QT update? Security Update version 1.0 came out about the same time. It has since been pulled and replaced with version 1.1 following some users experiencing issues (although 1.0 worked fine for me). 
    Try booting into "Safe Mode" (hold down Shift during start-up) and see if it will allow you to run Software Update again.
    Failing that Barry's suggestion of an A & I will undoubtedly do the trick.
    mrtotes

  • New image sequence will not play back in real time.

    I built a image sequence of 300 stills (jpegs) and when I ask it to build it at 30fps I can't get quicktime to play it back at that speed. I can barely get the software to play back at .25fps. I just bought the software to assemble consecutive stills from my DSLR and after spending 2 hours on the phone with apple I found out they offer no support for windows users.Is there another software out there that anyone could recommend that edits together stills to form a movie. Any Help is appreciated.

    Premiere is showing multiple drivers, including an old Creative ASIO driver... but I ran a cleaner last year to remove it (not sure why Premiere is still listing this??).  I also have a Matrox MXO2 LE Max installed, which I believe installs an audio driver as well.
    I'm not sure what you mean by "check with system default"?  There is nothing in the Premiere audio hardware preferences that mentions a "default" of any kind.
    Again, this makes absolutely no sense as I've not had any issues for years and worked on this last night... turn on computer today and suddenly it won't play audio in Premiere?!
    Anyway, in my audio hardware preferences:
    - I have always had Adobe Desktop Audio set to Premiere Pro WDM Sound.  The dropdown list there gives me the options of: Premiere Pro WDM Sound, Xonar Essence ST ASIO 64 (my audio card), Creative ASIO, Matrox ASIO Driver for Premiere Pro. 
    - Map Output for has always been set to Adobe Desktop Audio (Matrox Player is my other choice).
    - Even when selecting Premiere Pro WDM Sound, it always displays the Speakers below as "Speakers (ASUS Xonar Essence ST Audio Device)"
    One further note (not sure if it helps)... as I said, Premiere is showing the audio levels, but if I look at the Windows desktop sound it doesn't show any levels (it normally does).  And again... sound is working in every single other program I've tried... INCLUDING Adobe Audition (which has some of the same settings showing as Premiere does!).
    So this is definitely an issue within Premiere... I just don't know what else to do.  Thanks for assisting!
    Greg

  • Firefox disappered from my desk top -it will not come back after new download, help

    I got reminders of new updates. I tried several times but it never completed the process after a huge time lapse. Now it disappeared from my icons and could not be retrieved so I tried to download Firefox again. It appears to download ..then nothing.Help please.

    Hi, beth.lau.gr.
    Thank you for visiting Apple Support Communities.  
    I understand you have been experiencing issues with your iPhone restarting and showing you a blue screen.  I wont be able to give you an exact answer as to why this is happening.  However, this is the most relevant troubleshooting article for this issue.  This article also provides options to reach out to us via phone for additional assistance.  
    If your iOS device restarts, displays the Apple logo, or powers off while you're using it
    http://support.apple.com/en-us/HT203899
    Cheers, 
    Jason H.  

  • HP w1907 Monitor - will not come back after computer goes to sleep

    When restoring my computer from sleep mode, the monitor flashes on briefly and then goes off.  It takes multiple times of cycling the power on the monitor before it styays on.  It is currently connected by an analog cable.

    Have you tested what happens if you disable power save mode at monitor?
    *** Say 'Thanks' with Kudos ***

  • Firefox icon in the Taskbar will not start on the first click, sometimes needing to click 2 or 3 times for it to open (and this is after a fresh reboot with Firefox not running in Task Manager.

    Upon a fresh reboot the Firefox icon in the Taskbar will not work on the first click, sometimes it will not work at all and I need to go to Start-> then click the Firefox icon in the Start menu. Why is it that the icon won't start up on the first click?

    Same issue - however firefox will open but I can not click on only of my tool bar shortcuts - the writing on the google age is greyed out so I can not click on anything. Still no resolution? I have deleted the folders and re-installed - it will open and then locks and it will not work????

  • I cannot get my ipod touch or iphone to be recognized by Itunes on my mac mini. Only when i download itunes each time afresh, will it show up the first time. Then these devices will not be recognized at other times. Is it because i am not uninstalling it

    I cannot get my ipod touch or iphone to be recognized by Itunes on my mac mini. Only when i download itunes each time afresh, will it show up the first time. Then these devices will not be recognized subsequently. Is it because i am not uninstalling itunes before I download it? Surely this is a basic thing, ie that my devices need to recognize each other?

    After you dry the iPod:
    How to fix a wet iPod or iPhone | eHow.comfix-wet-ipod-iphone.html
    Connect the iPod to a charging source overnight and then try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       
    If iTunses can see the iPod you can backup the iPod
    iOS: How to back up
    http://support.apple.com/kb/HT1766and copy media from the iPod
    Recovering your iTunes library from your iPod or iOS device: Apple Support Communities
    If iTunes does not see the iPod then its contents are lost

  • My iPod shut off randomly and will no longer turn back on. I plugged it in to charge it, but after several hours it will not turn back on. What should I do?

    My iPod turn off randomly. I plugged it in to the charger, and after several hours, it still will not turn on. I even plugged it into my computer and pulled up iTunes, where it showed up on the screen as plugged in, but still it will not turn back on. Any suggestions on what I should do?

    - First try resetting the iPOd:
    Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears
    - Next try restoring the iPod via iTunes, first from backup and if still problem to factory defaults/new iPod.

Maybe you are looking for