Portlets supported in CF10 Standard?

Hi there CF people!
Are portlets supported in CF 10 standard? We are putting a server together to handle portlet versions of our apps, and wondered if CF 10 standard has remote portlet support?
Thanks!
Dave Kraft

I sure appreciate the answer Pete!
BTW I was reading your posts and presentations last week on portlets using previous CF versions. I'm wondering how popular the mix of CFand portlet servers is.
On the subject of CF10 standard, I read this morning that HTML5 charts were crippled in CF10 standard, forcing users to buy the Enterprise version if they want that feature. Have you heard that too?

Similar Messages

Does Groupware portlet support Exchange server 2007

Hi ALL,
Does anyone had any idea, will the groupware portlet support Exchange server 2007. I tried with exchange 2003 is working with groupware.
Please let me know any ideas to display email, calender, tasks in the portal.
Thanks
Manu.

If groupware portlet is support for exchange 2007, is there any other options.

To find out how SAP is handling language support in the standard product.

Hi All,
i have one issue like "To find out how SAP is handling language support in the standard product". Any body have the solution, please send me as soon as possible.
i am very thankful to you all in advance.
Thanks & Regards,
Nagarjuna.

It would be easier to send a solution if you'd clearly defined the problem!.
SAP is built to be multilingual.
For ABAP development, to ensure that your code is able to be multilingual, you should not hard code any text that the users could see - you should instead use text elements, standard texts, OTR, message classes etc.
matt

Does iPlanet Calendar Server 2.x (iCS 2.x) support IETF iCalendar standards?

Does iPlanet Calendar Server 2.x (iCS 2.x) support IETF iCalendar
standards?
<P>
iPlanet Calendar Server was designed from the ground up to support
IETF calendar
standards. Its standards-based features make it easier for users to
share
calendaring information across the network. As standards continue to
evolve and
emerge, iPlanet will continue to support for these new IETF standards.
The relevant IETF calendar standards are:
<ul>
<li>iCalendar (RFC2445)
<li>iTIP (RFC2446 iCalendar Transport-Independent Interoperability Protocol)
<li>iMIP (RFC2447 iCalendar Message-Based Interoperability Protocol)
<li>CAP (draft - Calendar Access Protocol)
</ul>

Does iPlanet Calendar Server 2.x (iCS 2.x) support IETF iCalendar
standards?
<P>
iPlanet Calendar Server was designed from the ground up to support
IETF calendar
standards. Its standards-based features make it easier for users to
share
calendaring information across the network. As standards continue to
evolve and
emerge, iPlanet will continue to support for these new IETF standards.
The relevant IETF calendar standards are:
<ul>
<li>iCalendar (RFC2445)
<li>iTIP (RFC2446 iCalendar Transport-Independent Interoperability Protocol)
<li>iMIP (RFC2447 iCalendar Message-Based Interoperability Protocol)
<li>CAP (draft - Calendar Access Protocol)
</ul>

CF10 Standard reverted to Developer and remains there

hi there
I have a very strange behavior: Since years, we run CF10 Standard on Win2k3 for an old productive site. Some weeks ago, I faced some DOS-like problems on it and discovered that CF Admin shows the version as Developer Edition. This was absolutely surprising to me as we have a valid CF10 Standard Serial since 2012. Of course I entered it immediately again but to no avail. CF10 would remain in developer state.
Can this be caused by some CF10 Updates? We are at Update 13. Afaik, we do not need anything that is a CF10 Enterpreise feature. Can it be that some CF10Ent feature was turned on somehow that now prevents entering a Standard serial? And if so, what can I do to get bacl to a full working CF10 Standard? Any other ideas?
CF10 currently runs on Apache 2.2.27. Apache was updated several times over time.
This is critical because of the IP limitations. Lucky we that this system is used only seldomly. But still: DOS like problems appear.
Any ideas how to correct that?
not to say that this is quite urgent to me ...
Thanks
Tinu

Hi Tinu,
Go to \ColdFusion10\cfusion\lib and locate license.properties. Open this file in notepad or wordpad and then you will find the ColdFusion 10 Serial number there. If not, then please type in your license key, save the file and Restart the ColdFusion services.
This should work for you.
Regards,
Anit Kumar

Does icloud email support the DMARC standard?

Hello,
Does icloud email support the DMARC standard? Some of the emails that come into my icloud.com should an unknown dmarc status in the headers. For example:
pass=?; dmarc-policy=(noPolicy); s=; d=
is contained in the header of some emails. I send the same email to a gmail account and it shows dmarc setup properly. Are their special rules for icloud for DMARC?
Thanks,

Set up an email alias:
Create or change an email alias:
http://support.apple.com/kb/PH2622
About email aliases:
http://support.apple.com/kb/HT4897
If I'm not mistaken, GMail is more robust in allowing you control over whether you automatically reply using the address to which a message was sent, to avoid inadvertently revealing your real or main address when dealing with mail from aliases, unless iCloud does that by default (I've only used this type of feature through GMail but was tending to my old Mac.com address and ran across your post...).

[SOLVED]GPG no longer supports --no-use-standard-socket?

I've used an SD card for where I store my gnupghome for a long time. I have delegated subkeys and all the configuration for them there. It's mounted to /mnt/keys on vfat. These cards use a FAT file system as I use these keys on multiple operating systems.
GPG with release 2.1 has removed the 'standard socket' options, which means now if your gnupg home is on any file system that can't create socket files (see: FAT), gpg-agent can no longer run. Ironically, this is also the release that *removes* all support for running gpg without an agent!
I'm disappointed this was not considered news for arch, I even wrote a small silly wrapper just for forcing me to read front page stories! (http://github.com/codemac/yosumiru)
The GPG news page had the following:
With GnuPG 2.1 the need of GPG_AGENT_INFO has been completely removed and the variable is ignored. Instead a fixed Unix domain socket named S.gpg-agent in the GnuPG home directory (by default ~/.gnupg) is used. The agent is also started on demand by all tools requiring services from the agent.
Any thoughts on how I can keep my gnupg on a FAT filesystem and still run the agent? I'm feeling pretty hosed right now, and am pretty confused why this feature was removed from gpg agent, as this would be as simple as keeping the old functionality, but maybe forcing the --no-use-standard-socket option to be in gpg.conf
Last edited by codemac (2014-12-02 18:43:06)

codemac wrote:I've used an SD card for where I store my gnupghome for a long time. I have delegated subkeys and all the configuration for them there. It's mounted to /mnt/keys on vfat. These cards use a FAT file system as I use these keys on multiple operating systems.
That's exactly what I used to do as well: mount a USB key read-only and run gpg --homedir /path/to/usb.
codemac wrote:
GPG with release 2.1 has removed the 'standard socket' options, which means now if your gnupg home is on any file system that can't create socket files (see: FAT), gpg-agent can no longer run. Ironically, this is also the release that *removes* all support for running gpg without an agent!
I'm disappointed this was not considered news for arch, I even wrote a small silly wrapper just for forcing me to read front page stories! (http://github.com/codemac/yosumiru)
The GPG news page had the following:
With GnuPG 2.1 the need of GPG_AGENT_INFO has been completely removed and the variable is ignored. Instead a fixed Unix domain socket named S.gpg-agent in the GnuPG home directory (by default ~/.gnupg) is used. The agent is also started on demand by all tools requiring services from the agent.
Any thoughts on how I can keep my gnupg on a FAT filesystem and still run the agent? I'm feeling pretty hosed right now, and am pretty confused why this feature was removed from gpg agent, as this would be as simple as keeping the old functionality, but maybe forcing the --no-use-standard-socket option to be in gpg.conf
I don't understand why you insist on using --no-use-standard-socket...
Some background: traditionally gpg-agent is started by a DE (e.g. xfce4-session starts it). This is useful because gpg-agent also manages ssh keys. However, this is not required anymore because agents are started on-demand and multiple agents can run concurrently.
Now, if you didn't have a vFAT FS, all is good as you call gpg --homedir because it will invoke gpg-agent with the correct --homedir flag.
So, all you need to do now is to rsync your gnupg dir on the SD card to some temp dir, e.g. /dev/shm/gnupg and use this dir as an argument to --homedir, and don't care about the agent at all.

Opportunity Search for Status NE (is not) is not supported by SAP Standard

Hi experts,
due to wiki entry
Searching for business transactions in the web ui using the Status criteria - CRM - SCN Wiki
the opportunity search for a status with operator NE is not supported.
Is there any SAP proposal for an appropriate workaround?
Thank you and best regards
Vanessa

Hello Vanessa,
This is a fresh development for my current customer which is not yet completely tested. The last customer had the same requirement, created an OSS-message for it, SAP told him in standard it is not possible and gave up. I think I already heard that too many selection parameters are not supported but I haven't seen it yet in our project. But I have seen that with mabye 100000 excluded transactions there is a time out.
The alternative would be to create a sub-class of the GENIL-class (I think this is CL_CRM_QOPP_RUN_BTIL in your case - search for CL*OPP*IL* ) where the SQL-statement is triggered and redefine the relevant method (which is normally GET_DYNAMIC_QUERY_RESULT) and enhance the SQL-statement. Somewhere is customizing you have to replace the original class with the new class afterwards but right now I don't know where. I have not yet done this from scratch and I need to investigate this a little bit further.
The second alternative would be to modify the select statements in a BADI. I guess it is CRM_BADI_RF_Q1O_READ. But there I only the the possibility to change the STATUS_COMMON-criteria to OBJECT_ID criterias as still STATUS_COMMON NE is not supported in the SQL-statement of the GENIL-class.
Best regards,
Thomas

Help with custom page size support for non standard paper

Firstly, we appreciate any support you may be able to provide, we have already thrown considerable effort at this and it has been very time consuming and frustrating.
To support a number of business functions need to print to (non standard) continuous and mulitpart paper on a dot matrix printer. The (test) Mac is a 10.4.11 G4 laptop, the printer is an Oki Microline 520 (9 pin 80 column, IBM Proprinter, Microline or Epson FX personalities with a parallel interface) which has been networked via a HP JetDirext Ex Plus print server. That part appears to be operating correctly.
We have tried a number of drivers / printer personalities with varying levels of success:
ESP / EPSON 9-Pin Series CUPS v1.1 / Epson FX personality
ESP / OKIDATA 9-Pin Series CUPS v1.1 / Oki Microline personality
Ghostscript / epsonc / Epson Dot Matrix Foomatic PPD / Epson FX personality
Ghostscript / ibmpro / IBM ProPrinterII Foomatic PPD / IBM Proprinter personality
Ghostscript / okiibm / Oki Microline IBM compatible 9 pin Foomatic PPD / IBM Proprinter personality
There were no appropriate drivers in Gutenprint (5.2.3 version) The most successful is the okiibm / Oki Microline IBM compatible 9 pin settings, it can print A4 and honors the Printer Features Resolution settings in the print dialogue.
Q1: Should we see anything in the Printer Info / Installable Option, it is always blank ?
The issue is custom page sizes, we can manage / add Custom Pages Sizes via the Page Setup / Paper Size interface and they draw on the screen OK but they do not work at the printer (various issue at the printer such error messages, junk printing and wrong orientation):
Q2: Are we heading in the right direction or is there a better way to handle this ?
Q3: Would 10.5 solve all our problems, are the print drivers any better ?
Q4: Is this the correct way to specify custom page sizes, is this all we need to do ?
Q5: Is so how do we get the driver to respect the size, do we need another filter or something ?
Q6: Is it possible to add (by hand) custom page sizes to the ESP drivers or Foomatic PPD files so they they appear as a "standard" offering in the Page Setup / Paper Size interface ?
Sorry for the long / complicated post and thanks in advance for any advice / assistance.

Matt Broughton wrote:
Testing on 10.5.7, Tried both Oki 9-Pin Series 1.3 / Microline personality (no joy) and Epson 9-Pin Series 1.3 (this is a much better driver than 1.1) / Epson FX personality but not much joy with custom page sizes,
The Oki 9-pin Series 1.3 and the Epson 9-Pin Series 1.3 should produce the same results. The only difference in the PPDs is the printer model name.
After some testing, I find that the output is not the same despite the two PPDs being virtually identical. I did spot in the CUPS source code for the rastertoepson filter that there is some model name matching for Epson printers. Thus I can see where the output using the Oki 9-pin PPD could be different than when using the Epson 9-pin PPD.
but again once I imbedded the page size into the ppd some (but frustrating) luck. I can get it to respect the paper orientation and it prints well but I could not get the form length to work properly. At best over a print run of 7 labels it would creep up the label by about 0.1 inches / 2 mm.
Just for the fun of it, I made some additions to the Epson 9-pin 1.3 PPD. All I can say is that I could print a job to file. I have no way to know what it would look like on paper.
I did find that using a custom paper size did add some unwanted margins to the output bounding box. Putting the custom page size into the PPD seemed to get around that issue.
I added the following lines to the Epson 9-pin PPD 1.3--
<pre style="overflow: auto;font-size:small; font-family: Monaco, 'Courier New', Courier, monospace; color: #222; background: #ddd; padding: .3em .8em .3em .8em; font-size: 9px;">*PageSize Label1/Label1: "<</PageSize[288 107.8]/ImagingBBox null>>setpagedevice"
*PageRegion Label1/Label1: "<<PageSize[288 107.8]/ImagingBBox null>>setpagedevice"
*ImageableArea Label1/Label1: "0 0 288.00 107.80"
*PaperDimension Label1/Label1: "288.00 107.80"</pre>
This adds a paper size with the 4 inch (288pt) width and 1.5 inch (107.8pt) height. That represents the 1.4 inch label and the 0.1 inch gap between labels. I set 0pt margins except for the bottom where is set the 0.1 inch (7pt) gap as the bottom margin.
The full diff in context is--
<pre style="overflow: auto;font-size:small; font-family: Monaco, 'Courier New', Courier, monospace; color: #222; background: #ddd; padding: .3em .8em .3em .8em; font-size: 9px;">loki:~ matt$ diff -u /usr/share/cups/model/epson9.ppd ~/Desktop/epson9.ppd
--- /usr/share/cups/model/epson9.ppd 2009-02-20 20:16:53.000000000 -0600
+++ /Users/matt/Desktop/epson9.ppd 2009-06-06 20:37:06.000000000 -0500
@@ -42,6 +42,7 @@
*PageSize Legal/US Legal: "<</PageSize[612 1008]/ImagingBBox null>>setpagedevice"
*PageSize A4/A4: "<</PageSize[595 842]/ImagingBBox null>>setpagedevice"
*PageSize FanFoldUS/US Fanfold: "<</PageSize[1071 792]/ImagingBBox null>>setpagedevice"
+*PageSize Label1/Label1: "<</PageSize[288 107.8]/ImagingBBox null>>setpagedevice"
*CloseUI: *PageSize
*OpenUI *PageRegion/Media Size: PickOne
*OrderDependency: 10 AnySetup *PageRegion
@@ -50,17 +51,20 @@
*PageRegion Legal/US Legal: "<</PageSize[612 1008]/ImagingBBox null>>setpagedevice"
*PageRegion A4/A4: "<</PageSize[595 842]/ImagingBBox null>>setpagedevice"
*PageRegion FanFoldUS/US Fanfold: "<</PageSize[1071 792]/ImagingBBox null>>setpagedevice"
+*PageRegion Label1/Label1: "<<PageSize[288 107.8]/ImagingBBox null>>setpagedevice"
*CloseUI: *PageRegion
*DefaultImageableArea: Letter
*ImageableArea Letter/US Letter: "18.00 18.00 594.00 774.00"
*ImageableArea Legal/US Legal: "18.00 18.00 594.00 990.00"
*ImageableArea A4/A4: "18.00 18.00 577.00 824.00"
*ImageableArea FanFoldUS/US Fanfold: "18.00 18.00 1053.00 774.00"
+*ImageableArea Label1/Label1: "0 0 288.00 107.80"
*DefaultPaperDimension: Letter
*PaperDimension Letter/US Letter: "612.00 792.00"
*PaperDimension Legal/US Legal: "612.00 1008.00"
*PaperDimension A4/A4: "595.00 842.00"
*PaperDimension FanFoldUS/US Fanfold: "1071.00 792.00"
+*PaperDimension Label1/Label1: "288.00 107.80"
*MaxMediaWidth: "1080.00"
*MaxMediaHeight: "86400.00"
*HWMargins: 18.00 18.00 18.00 18.00</pre>
I don't know if that will help you or not. Let us know what sort of progress you make.
Matt

WebCenter Portal and Portlet support in JDeveloper 11.1.2 version

Hi,
When the WebCenter Portal and Portlet application creation will be available within JDeveloper 11.1.2 version ?
Thanks
Eli

Thanks for your answer.
My Requirements are:
1) Develope a stand alone ADF FACES(JSF 2.0) application
2) Develope a Portal using webcenter- We need to implement portlets by taking some of the functonality that was implemented in section (1) and use the Portlet-JSF bridge to create the portlets.
Basically, we need to support JSF 2.0 standart.
As I understood I must use the JDeveloper 11.1.2 version as it support the JSF 2.0. but what about the Webcenter and the Portlet-JSF bridge to support JSF 2.0 ?
I will be happy to get a clarification for those requirments.
Thanks a lot !
Eli

VWLC does not support 802.11ac standard?

On data sheet page, on wireless standards i cannot see 802.11ac to be supported.
why? it is not supported or is just an error on the data sheet.

802.11ac support is tied to the access point and the compatibility with code version on the WLC/vWLC. SO as long as you have 802.11ac access points and the proper supported WLC/vWLC code, 802.11ac will be available.
-Scott

Data Services support for HL7 standard

Hi everyone,
We have a Healthcare customer who uses HL7 messages to integrate with their Healthcare applications.
According to our investigations, this HL7 standard uses the communication protocol MLLP.
Is this supported by Data Services?
Thanks a lot!
David

Hello David
As part SAP NL initiative, I have developed an adapter for integrating HL7 application using SAP PI 7.11. This adapter is a consulting solution and it is known as IAH (Integration Adapter for Healthcare). It can communicate HL7 messages over MLLP and has support for all HL7 V 2.X messages. The adapter is already being used by some of our local & international customers.
Regards
Vijendra Singh Bhanot
Edited by: Vijendra Singh Bhanot on Jan 3, 2011 1:54 PM

CF10 standard on Linux

Does CF10 run on RHEL 5.10, the last update for v5?

Hi baylegg,
ColdFusion 10 is officially supported on RHEL 5.6 and 6.1. You can install it on RHEL 5.10 as well and should not face any issues.
Regards,
Anit Kumar

Will Kodo EJB3 support SQL queries standard?

Hello,
Will Kodo EJB3 support SQL queries (via
EntityManager.createNativeQuery(...))
in the Standard Edition since native queries are part of the API? Or will
that functionality require Enterprise Edition or Performance Pack?
thanks and good luck in the new year,
dave

Currently, SQL queries require the enterprise edition. Whether this
will change for Kodo 4 final has not been decided. The safest route
would be to assume that it will not change.

ADF Portlet Support

I have couple of questions Oracle Portal (10.1.4) and ADF Portlet(using jdeveloper10.1.3)
1) Whether ADF Portets can be deployed as JSR168 portlet? If yes, does it support inter portlet communication ?
2) Whether ADF portlets can be deployed as PDK-Java portlets? If yes, does it support inter portlet communication?
I hear and read lot of things about these kind of support. I am trying to get an official word on it.
Thanks

Hi,
thinks the geeks you are looking for are listening here
WebCenter Portal
Frank

Portlets supported in CF10 Standard?

Similar Messages

Maybe you are looking for