Portlets to integrate External Applicat. like AS400 and Lotus Notes

Are there Portlets available (besides the Lotus Notes one for E-mail,ToDo, etc) to integrate AS400 with DB400 and Lotus Notes with Domino ?

Hi Sandeep,
Here is the way youshould configure the external aaplication :
Login URL : http://'yourserver'/names.nsf
UserName/ID Field Name: Login&username
Password Field Name: password
Type of Authentication Used: GET
In the additional fields, you should add :
RedirectTo : 'link to your application'
Regards,
Jacques.

Similar Messages

HT3702 I have never ordered anything. Everything in this list. Press to edit. To purchase anything from this game. Answer "No" for the transfer of the game. It has cost me a lot of money. I did not like it and would not pay this amount. For games that

I have never ordered anything. Everything in this list.
Press to edit. To purchase anything from this game.
Answer "No" for the transfer of the game.
It has cost me a lot of money.
I did not like it and would not pay this amount. For games that are too expensive.
Billed To:
[email protected]
preethep notate
Bangkok
Bangkok 10400
THA
Order Number: MHBG76LW0Z
Receipt Date: 22/05/12
Order Total: $49.99
Billed To: American Express .... 7009
Item
Developer
Type
Unit Price
Real Football 2012, Suitcase full of coins
Report a Problem
Gameloft
In App Purchase
$49.99
Order Total:
$49.99

This is a user to user forum. Apple is not here. Apple does not read here. Apple does not post comments or answers here.
Use the Report a Problem link on the receipt to contact customer service.
Also, change the password for your Apple ID connected to this account and perhaps remove the bank card information until you have this resolved.
Manage your Apple ID -
https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/

My ipod is not starting its turn on but looks like sync. and does not stop

My ipod is not starting its turn on but looks like sync. and does not stop and screen is black

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Calendar synch BB Storm, BB DM 4.7 and Lotus Notes 8.0.2

I am seriously frustrated with the synchronization issues with my BB Storm 9530, DM 4.7.0.25 and Lotus Notes 8.0.2. I have searched this forum and Crackberry to find a solution and at this point I think there is just no solution.
When I sync my calendar, (two-way via IntelliSync) to Lotus Notes, the BB calendar ALWAYS has 75-80 items and tries to delete 100's of items form Lotus Notes (Lotus Notes is correct and I only have 370 calendar items). I have to reject the sync, delete the BB Calendar database and do a one-way push from Lotus Notes to BB. I have the "keep forever" checked on the BB, I have the "transfer all scheduled items" checked in in the BB DM and IntelliSync set up, I have done all the stupid stuff, like take out the battery, reinstall BB DM, checked/re-checked the memory, deleted and reinstalled the IntelliSync software, yada. yada and NONE of it works.
I have resigned myself to the fact I can only do a one way push from Lotus Notes to the BB...PERIOD. I will get rid of BB when my contract is up, or sooner if it continues to make me crazy. I love that RIM just unleashes software on the world and expects us to test it for them. This is not rocket science. I work in the software industry and this type of "release and let the world test it" mentality has got to stop. Calendar sync is not that big of a deal. I was a previous Active Sync user and I NEVER had an issue with this basic functionality. RIM needs to either fix the BB DM or force IntelliSync to fix the sync program or write their own sync software and quit depending on a 3rd party. Either way, I have had it.

Hi,
I have checked this in Outlook, imported holidays of X country and even those holidays got installed in Outlook, but when i synched those holidays with Nokia N 79, those holidays were not synched with Nokia N 79 inspite of those entries are there in Outlook, same goes with Lotus Notes 6.5 [i don't have Lotus Notes 8.x], So its seems to be a limitation on sync side

SAP XI and Lotus Notes

Hello,
Is there a best approach followed now to integrate XI and Lotus notes. We have a requirement to create a lotus notes document from SAP R3 using XI.
Any suggestions and successful implementations please...
Thank you
Thilothama

Hello Thilothama,
if you apply SAP XI to connect to Lotus you may leverage the following adapters:
- HTTP
- SOAP
- XINotes (partner adapter)
the choice depends on how much effort you want to spend on the Lotus side.
In case of HTTP you simply develop an agent that processes the request XML. This can be done fairly easy - however this is a proprietary solution since you kind of hard-code the formats.
In case of SOAP you need a little more work. If you use Lotus Domino R6 you also manually have to take case of SOAP request parsing (e.g. using the Microsoft SOAP toolkit or some java-based parser). If you use R7 this is easier since SOAP processing is implemented as part of Domino. Then, your interface is described using a WSDL and this can optionally also be published via a UDDI registry.
In case of XINotes you don't need any work on Lotus since the XINotes adapter is based on NCSO - this means the adapter directly understands notes forms and notes views.
Regarding the payload XML you process via HTTP or SOAP you may leverage DXL. DXL is easy to process on Domino since you can use the DXL Importer classes to directly create/update/modify notes documents within 2 codelines. On the other hand: if you use DXL the sender system should already prepare the DXL - so it needs lots of information regarding your notes DB (replica ID etc).
If you need more tangible experiences you may also contact me directly.
Regards
Michael

Pdfmaker and lotus notes

using Acobat 8 pro.pdfmaker tool bar doesn't link up with lotus notes 6.5?

Thanks,
Still doesn't load?
The Notes.ini file is located at C:\NOTES. I have copied and attached the
text from that file.
KitType=1
Directory=C:\NOTESDAT
InstallType=2
FaultRecovery_Build=Release 6.5.1
Timezone=6
DSTLAW=3,2,1,11,1,1
FileDlgDirectory=C:\Documents and Settings\cmaltase\My Documents
Enableplugins=1
PhoneLog=2
Log=log.nsf, 1, 0, 7, 40000
DST=1
MailType=1
$$HasLANPort=0
Location=Home (Network Dialup),9FA,790
UPDATE_TIMER=12/09/2010 12:00:50 PM
SUDIALOG_ON=0
WWWDSP_SYNC_BROWSERCACHE=0
WWWDSP_PREFETCH_OBJECT=0
EnableJavaApplets=1
Preferences=-2147480463
DESKWINDOWSIZE=0 0 976 669
AltNameLanguage=en
ContentLanguage=en-US
WeekStart=1
ViewWeekStart=2
NavWeekStart=1
XLATE_CSID=52
SPELL_LANG=1033
SPELL_PREFERENCES=0
Region=en-US
DatePickerDirection=0
Passthru_LogLevel=0
Console_LogLevel=2
VIEWIMP1=Lotus 1-2-3,0,_IWKSV,,.123,.WK1,.WK3,.WK4,.WKS,.WR1,.WRK,,4,
VIEWIMP2=Structured Text,0,_ISTR,,.CGN,.LTR,.STR,,1,
VIEWIMP3=Tabular Text,0,_ITAB,,.PRN,.RPT,.TAB,.TXT,,1,
VIEWIMP4=vCard,0,_IVCRD,,.VCF,,1,
VIEWEXP1=Comma Separated Value,0,_XCSV,,.CSV,,1,
VIEWEXP2=Lotus 1-2-3,0,_XWKS,,.123,.WK1,.WK3,.WK4,.WKS,.WR1,.WRK,,4,
VIEWEXP3=Structured Text,0,_XSTR,,.CGN,.LTR,.STR,,1,
VIEWEXP4=Tabular Text,1,_XTAB,,.CGN,.LTR,.RPT,.TAB,,1,
VIEWEXP5=vCard 2.1,0,_XVCRD,,.VCF,,1,
VIEWEXP6=vCard 3.0,0,_XVCRD3,,.VCF,,1,
EDITIMP1=ASCII Text,0,_ITEXT,,.C,.H,.PRN,.RIP,.TXT,,1,
EDITIMP2=Binary with Text,0,_ISTRNGS,,.*,,1,
EDITIMP3=BMP Image,0,_IBMP,,.BMP,,18,
EDITIMP4=CGM Image,0,_IFL,,.CGM,.GMF,,8,
EDITIMP5=GIF Image,0,_IGIF,,.GIF,,18,
EDITIMP6=HTML File,0,_IHTML,,.HTM,.HTML,,1,
EDITIMP7=JPEG Image,0,_IJPEG,,.JPG,,18,
EDITIMP8=Lotus 1-2-3,0,_IW4W,_IWKSE,.123,.WK1,.WK3,.WK4,.WKS,.WR1,.WRK,,4,
EDITIMP9=Lotus PIC,0,_IPIC,,.PIC,,8,
EDITIMP10=Lotus Word Pro,0,_IW4W,,.LWP,,2,
EDITIMP11=Microsoft Excel,0,_IW4W,,.XLS,,4,
EDITIMP12=Microsoft RTF,0,_IW4W,_IRTF,.DOC,.RTF,,2,
EDITIMP13=Microsoft Word,0,_IW4W,,.DOC,,2,
EDITIMP14=PCX Image,0,_IPCX,,.PCX,,18,
EDITIMP15=TIFF 5.0 Image,0,_ITIFF,,.TIF,,18,
EDITIMP16=WordPerfect 5.x,0,_IW4W,,.DOC,.WPD,,2,
EDITIMP17=WordPerfect 6.0/6.1,0,_IW4W,,.DOC,.WPD,.WPT,,2,
EDITEXP1=ASCII Text,2,_XTEXT,,.C,.H,.PRN,.RIP,.TXT,,1,
EDITEXP2=CGM Image,2,_XCGM,,.CGM,.GMF,,8,
EDITEXP3=Microsoft RTF,2,_XRTF,,.DOC,.RTF,,4,
EDITEXP4=TIFF 5.0 Image,2,_XTIFF,,.TIF,,18,
EDITEXP5=vCard 2.1,0,XVCRD,,.VCF,,1,
EDITEXP6=vCard 3.0,0,XVCRD3,,.VCF,,1,
DDETimeout=10
NAMEDSTYLE0=030042617369630000000000000000000000000000000000000000000000000000000000000001 010100000A0000000000000100A0050A0000006400A0050A000000000000000000000000000000000000000000 0000000000000000000000000000000000000000000000009404000000000000
NAMEDSTYLE0_FACE=Default Sans Serif
NAMEDSTYLE1=030042756C6C657400000000000000000000000000000000000000000000000000000000000001 010100000A000000000000000008070A000000640008070A000000000000000000000000000000000000000000 0000000000000000000000000000000000000000000000049404000000000000
NAMEDSTYLE1_FACE=Default Sans Serif
NAMEDSTYLE2=0300486561646C696E650000000000000000000000000000000000000000000000000000000001 0101010B0C0000000000000100A0050A0000006400A0050A000000000000000000000000000000000000000000 0000000000000000000000000000000000000000000000009404000000000000
NAMEDSTYLE2_FACE=Default Sans Serif
DefaultMailTemplate=mail6.ntf
AddInMenus=C:\PROGRA1\Adobe\ACROBA1.0\PDFMaker\Mail\LOTUSN1\PDFMLO1.DLL
AdobePDFMInst=1
EXTMGR_ADDINS=AdobePDFMToolbarInst
Work Safely,
Cliff Maltase
Crawford Station
MidWest Generation
DevyaniB <[email protected]>
03/22/2011 04:36 AM
Please respond to
<[email protected]>
To
cliff maltase <[email protected]>
cc
Subject
pdfmaker and lotus notes
Hi "http://forums.adobe.com/people/mwgen",
Could you please check if the following PDFMaker entries are made in
"notes.ini" -
*+AddInMenus=C:\PROGRA~1\Adobe\ACROBA~1.0\PDFMaker\Mail\LOTUSN~1\PDFMLO~
1.DLL+*
EXTMGR_ADDINS=AdobePDFMToolbarInst
AdobePDFMInst=1
[Please note the location of "notes.ini",
For single-user install of Notes, at ?C:\Program Files\lotus\notes?.
+For multi-user install of Notes, typically at ?C:\Documents and
Settings\\Local Settings\Application Data\Lotus\Notes\Data\?.]+
In case the entries are absent, please make the modifications as suggested
in http://kb2.adobe.com/cps/333/333476.html.
I'd suggest you make a temporary backup copy of the file before making any
modifications to it. Thanks!
- Devyani.

How to make external devices (like iPods, etc.) NOT mount as connected drives when plugged in via USB to a Mac?

If I plug my iPod (or a thumb drive or whatever) to my Mac's USB port, the device appears as a icon representing a connected drive on my Mac's Desktop.
This is normal, expected behavior.
HOWEVER, in some cases, I'd prefer that the device not "mount" as a connected external drive.
With thumb drives or external USB drive, of course, I want them to "mount" so I can transfer files on or off them -- that would be the only possible reason to connect an external drive like that.
But with other Apple devices like iPods or iPhones, there are TWO possible reasons to connect them to a Mac: either to "sync" them or transfer files on/off them; OR, to simply recharge the device's battery. (Or, both sync and recharging functions at once.)
For those people who use their Apple devices in ways that require transferring files (i.e. most people), then having the device "mount" as a connected device is a desirable behavior.
But in my circumstance (and I bet there are a lot of people in a similar circumstance), I have no need or desire to transfer any data to or from my device every time I plug it into my Mac: I'm plugging it in SOLELY to recharge the device's battery.
Specifically, in my case, I have a 6th-gen iPod Nano, and I use it exclusively as an FM radio and a pedometer. I don't have any mp3s or songs or any other external files loaded on it, nor do I plan to add any in the future.
The only reason I ever plug it into my Mac is so that I can recharge the iPod's battery.
But the "problem," which is a minor one I admit but a problem nonetheless, is that every time I connect the iPod to the Mac, the iPod appears as a "connected drive" icon on my Mac's desktop. Which means that I'm not supposed to just unplug the iPod when I'm done -- first, I have to find its icon on the Mac Desktop, and then drag the icon to the Trash, to "unmount" it -- and only then can I freely unplug the iPod without getting an error message telling me that I shouldn't just disconnect connected drives without first properly unmounting them.
This would be bothersome enough if I only had to do it once per connection, but in the case of the iPod Nano, there's no way to tell how recharged it is while it is in the act of recharging, so that to see if I'm "done," I have to unplug it, check the battery status, and if it's not fully charged, re-plug it back in. So that each time I recharge it, I often have to unmount the drive several times, depending on how impatient I am.
There has to be a way to prevent the mounting of the drives of devices that one is connecting simply for the purpose of recharging. But how?
Strangely, I also have an old iPhone, and when I plug that in for recharging in the same way, it DOESN'T appear as a connected drive on the Desktop. I'm not sure how I managed to do this, but long ago I must have changed some setting or preference for this to happen. And by now I've forgotten what I did.
I'd prefer that I could change the "mount/don't-mount" setting on a device-by-device basis -- i.e. make it such that this particular iPod doesn't load, but perhaps a different iPod would load -- but if that's not possible, then is there a way to stop ALL iPods and iPhones from loading as connected drives when plugged in?
(I'm not talking about appearing as connected drives within iTunes -- I'm talking about appearing as an icon on the Desktop in the Finder.)
And please don't tell me to just buy a wall charger! I prefer to recharge off my computer if possible, using the charging cord that came with the iPod.
I presume there's some simple setting to toggle this on or off, but I haven't yet found it. Any clues would be appreciated. Thanks!

Well, I already know about that Finder Preferences option, but that is not what I'm looking for. Why not? Because I still need CDs and DVDs to appear on the Desktop and mount properly! If I uncheck the "CDs, DVDs and iPods" option, then I lose the ability to access CDs and DVDs, which creates a whole new problem for me. What I want is to not mount iPods only -- actually, what I really want is to not mount this particular iPod -- but if that level of specificity is not possible, then I want to exclude just iPods from mounting, without also condemning CDs and DVDs (or whatever) to invisibility.
Also, I was confused by the way the Preference is worded: It says "Show these items on the Desktop," with a series of options to check. But this phraseology seems to mean that the unchecked items will still "mount," they simply won't appear as Desktop icons. One would still have to "Eject" them using a menu command, rather than dragging the icon to the Trash -- right? Or am I mistaken, and is the Preference Pane simply badly worded, and when they say "Show these items on the Desktop," what they really mean is "mount these external devices as connected drives." So that if a category is unchecked, then they won't load as external drives at all?
But if so, then what purpose could possibly be served by inserting a CD or DVD that is not recognized by the computer? And if it isn't recognized, then it would seem that there would be no way to ever Eject the CD or DVD disk. Right?
Thus, if I uncheck that Finder Preference box you suggest, one of two outcomes will result:
-- Either CD, DVDs and iPods are still mounted, they just won't appear as icons on the Desktop; but they would still need to be Ejected via a menu command, which doesn't solve my problem.
-- Or, CDs, DVDs and iPods are not mounted or recognized by the computer at all, which means that if I insert a disk into the disk drive, it will get stuck there forever, since there's no way to Eject it, since the OS doesn't recognize that it's even there. Which is thereby a new problem.
Either way, I'd have a problem! Or...? Clarification, anyone?

Unplug stopped working this past week so I downloaded 2.052 like suggested and still not working.

Have enjoyed Unplug and all of a sudden this past week it stopped working completely, not only on YouTube but Vimeo too. Updated like suggested but still not working.

Please contact the developer by email at [email protected] as this is an add-on and not a Firefox issue.

Synch Gmail Contacts via and Lotus Notes Contacts on BES

I currently use Wireless Synch to synchronize my Lotus Notes Contacts to my Blackberry Bold 9900 via a BES.
In addition to the LN account, I also have a Gmail account active on my Blackberry; however, the Contact Synch and the Calendar Synch features are both turned off (for the Gmail account) at present.
I would like to synch the Gmail Contacts and Calendar to my BB, but I am unsure whether this would impact my Lotus notes Contacts Address Book or my Lotus Notes Calendar. I have already had one incident where my Gmail contacts were intermingled with my Lotus Notes contacts and I want to keep them separate.
Can someone please explain what behaviour I should expect if I enable synch for the Gmail Contacts and Address book? Will this create separate, new address book and calendar (i.e. separate from the Desktop ones used with Lotus Notes) or will it merge the Gmail contacts and calendar with Lotus Notes contacts and calendar?
Also, please explain the differences between the Contacts synch and Calendar synch in the built in BB Gmail application and Google Synch App. Why would one use the later?
Note: In case this is relevant - I also have a Playbook with O/S 2.0 that is configured to access the Gmail account in fully synchronized mode. At present, the LN account is only accessed via BB Bridge on the Playbook.
Thanks!

The exact error message on the mobile, after sync, is:
"Data transfer not possible. Check data connection"

On two computers installed Desktop 7 and Lotus Notes crashed when I performed Organizer sync.

I upgraded to Desktop 7 on two very different computers. In both cases after following the prompts Lotus Notes crashed when I performed an organization sync. I sync calendar, memo and tasks 2 way and use defualts. Went back to (uninstalled 7) Desktop 6.1.0.36 and everything works fine now. We use Lotus Notes client 7.0.2
This is one of the most important features so it must work flawlessly. I use usb to sync. This is Windows XP 64 bit. I have another computer with same problem that is Windows XP 32 bit that use bluetooth to sync.
The Desktop Manager does not crash. Even if Lotus Notes Client is not running, while doing a sync I get display indicating that Lotus Notes crashed. It says it is sending diagnostic information to the admin but it stays there for hours and closer examination indicates no cpu cycles are being used. (SysInternals process explorer used to debug stuck threads - I am a software developer.)

That doesn't make sense, I used to go back and forth between my two computers and transfer music from each to my ipod. It was never a problem. Now with Itunes 7, it will not let me. Plus, I used to be able to drag playlists into the ipod and then the songs would transfer. Now when I drag up the playlists it won't let me drop them into the ipod. So . . . it can't be impossible to put music from two computers onto one ipod.

Interfacing between SAP ECC 6.0 and Lotus Notes

Hello Guru's,
I have a requirement where I need to catch billing document number from Lotus notes interface and send related information back to it.
Agreed approach to hadle this is using webservices.
Could you please guide me initial steps how to do it?
From SAP side, i have created RFC enabled function module and created Webservices from Menu path
utilities -> More Utilities -> Create Webservice -> From function module.
Any help on this topic would be very much appreciated.
Thanks

Hi Pankaj,
Your RFC-enabled FM on SAP side, which you've deployed as a wS is supposed to receive billing document numbers and return info related to those billing documents.
You just have to call this WS in Lotus Notes and take the returned info to process/display in Lotus Notes.
So you're already on the right track. What else do you want to know, please feel free to ask?
Cheers,
Anirut W.

Trouble with Acrobat 9 Pro and Lotus Notes

Hi folks,
I have an client, running Windows 7 Pro with M$ Office 2007 Pro, Lotus Notes 9 and Adobe Acrobat 9 Pro.
My problem is, that I am not able to initiate an e-mail-based review.
I can't choose an adressbook, it always says that there is no connection to the e-mail-program.
Also if I enter an valid e-mail-adress this message appears.
Lotus Notes 9 is set as the standard mail program in windows.
I hope, you can understand my problem and you can help me.
Cheers
Christian

Hi Christian,
Please set Outlook as default mail client and see if review can be initiated successfully or not.
Also note that, Lotus notes 9 is not officially supported with Acrobat 9.
Regards,
Priyanka

JDBC-ODBC Bridge and Lotus Notes

Greetings
Got this message in the Event Viewer when testing my ODBC
connection to a Lotus Notes DB:
Description:
The description for Event ID ( 0 ) in Source ( ColdFusion 8
ODBC Server ) cannot be found. The local computer may not have the
necessary registry information or message DLL files to display
messages from a remote computer. You may be able to use the
/AUXSOURCE= flag to retrieve this description; see Help and Support
for details. The following information is part of the event:
ColdFusion 8 ODBC
Server@LOCALHOST,ErrorCode=3004,ErrorMessage=sched.swschd.1424.Internal
error, an unexpected exception was detected..
The Notes DB is on another server. I have installed NotesSQL
and created an ODBC data source in Windows. I created the data
source in CF admin pointing to the Windows ODBC. When I tested the
connection I got the message above. I can connect to the Notes DB
using the Notes Client installed on the server with Coldfusion.
Any thoughts?
Thanks

>
It's not a CLASSPATH problem.
Did you create an ODBC DSN named test?
You have two choices:
(1) Create an ODBC DSN named test, OR
(2) Rewrite your database URL as:
String url = "jdbc:odbc:DRIVER={Microsoft Access Driver (*.mdb)};DBQ=c:\\foo\\bar\\baz.mdb";
Make the DBQ equal to the path to your Access database and it'll work.
I prefer the second idiom, because it doesn't require setting up a DSN. - MOD
Yes, I have created a DSN with the name 'test'.
The second option "jdbc:odbc:DRIVER={Microsoft Access Driver (*.mdb)};DBQ=c:\\foo\\bar\\baz.mdb" -> is the part 'baz.mdb' the name of the my database. So it will be: "jdbc:odbc:DRIVER={Microsoft Access Driver (*.mdb)};DBQ=c:\\foo\\bar\\test.mdb";
But what is the biggest different between those two? What is the advantage and the disadvantage?

Syncronisation Issue - 6233 and Lotus Notes 7.x

Hi,
I have having problems syncronising my Nokia 6233 with Lotus Notes 7.
I am connecting via USB and have the latest software for the mobile and the PC.
I am trying to syncronise calendar items only. When I syncronise some of the calendar items come across but not all. Seems to be random as some instances of regular weekly meeting come across but not all.
Would appreciate any comments.

01-Jul-2008 05:52 AM
rodjb wrote:
Hi,
I have having problems syncronising my Nokia 6233 with Lotus Notes 7.
I am connecting via USB and have the latest software for the mobile and the PC.
I am trying to syncronise calendar items only. When I syncronise some of the calendar items come across but not all. Seems to be random as some instances of regular weekly meeting come across but not all.
Would appreciate any comments.
Hi I have similar problems, thankful for any help or advice.
KP

SAP Crystal Report 2013 on Windows 2012 and Lotus Notes Databases

Hi everybody, does someone already try to use version 2013 of Crystal Report to report Lotus Notes databases content?
We have been used older version for about 10 years without any difficulties as a native driver exist for Lotus Notes.
But installing the version 2013, we have discovered that lotus Notes is not anymore present int the list of database to connect to...
Can anyone provide sonme help?
Many thank in advance
Dominique Anderegg
Insentia SA
Lausanne - Switzerland
[email protected]

See the SAP Crystal Reports 2013 Product Availability Matrix (PAM), page 9 and download the doc linked to there. According to that doc, Lotus Notes is now only supported via ODBC only.
Also, the search string 'lotus crystal 2013' (search box in top right corner) brings up the following KBA:
1238167 - Cannot create new report off the Lotus Notes Domino native driver in Crystal Reports
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Portlets to integrate External Applicat. like AS400 and Lotus Notes

Similar Messages

Maybe you are looking for