Ports needed for a nfs client

Hello -
Which ports on a firewall running on a solaris 10 machine should I open to make it a nfs client? I openned udp/tcp port 111. But it didn't work. The file server is running solaris 9.
Thanks
Rui

If you use the WebNFS feature of Solaris it will only require port 2049, to use WebNFS, simply mount your NFS share as an URI.
For example, replace:
mount server:/share /mountpoint
with
mount nfs://server/share /mountpoint
.. to use WebNFS instead.
.7/M.

Similar Messages

  • DA server within a DMZ - ports needed for internal network

    Hi,
     I'm planning on adding a domain joined DA server in my DMZ. The DA server will have 2 NICs, one for the internal network and the other for the external. I'll be using two consecutive public IPv4 addresses.
    On my external firewall I'll be opening the following ports for my DA server:
    - Port 443 inbound and outbound
    - UDP 3544 inbound and outbound.
    On my Juniper firewall between the internal network and DMZ I'll be opening the following bi directional ports between my DC and DA server:
    - IP Protocol 41 inbound and outbound.
     TCP/UDP 53, 88, 3389, 389, 443, 445, 636, 3268, 3269
    Am I right in thinking that in order for my DA clients to reach file shares (for example) I need to ensure that the required protocol and ports are open between my DA server and my file share (i.e. 443)? Doesn't this open a whole load of security holes?
    Thanks
    IT Support/Everything

    Hi there - in a similar scenario on many customer sites i have done the following configurations on the Internal Firewalls
    Internal IP of the DA Server ---> allow all traffic to selected VLAN's
    The above rule is restricting traffic from the DA Server to the required VLAN's / Networks you specify, The reasoning being is that Direct Access requires full connectivity to your apps / infrastructure. 
    john davies

  • S_DEVELOP authorization needed for CRM Web Client in SAP CRM 7.0?

    We implemented an own WebUI component in SAP CRM 2007 and use it in others components (with USAGE).
    After we transport the component in SAP CRM 7.0 we always got an error CX_BSP_DLC_CONFIG_GENERAL_ERR at loading the component. But if we set the permission to SAP_ALL all thing work fine.
    In SAP Note Nr. 1367944 we read:
    "It is not possible to run the CRM Web Client without the S_DEVELOP, activity=03
    authorization because it is needed by the Web Client Framework.
    The S_DEVELOP authorizatin is part of the SAP_CRM_UIU_FRAMEWORK PFCG role, which must
    be assigned to every user."
    "This dependency has been removed in CRM 7.0."
    Do we need to install some other SAP Notes at SAP CRM 7.0?
    Many thanks for advices!
    Handri Gunawan

    Hi Handri,
    I asked my collegue here, who created the note.
    The note is correct, in CRM 7.0 you do not need S_DEVELOP anymomre.
    The error that you have might occur because of another reason.
    Could you track the call stack of this exception?
    And send me back the call stack?
    Regards,
    Steve

  • Ports needed for CiscoWorks managment

    I am Instaling AP and I don't know which ports should be opened on switch for communication between Access Point and CiscoWork. For now we open all ports to CiscoWorks station, but we want to cut it as much as its possible. Also we've got problems with configuring CiscoWorks to work with AP (AiroNet1130) now it's working but we arn't sure which options are nessesery - so maybe someone could tell me what is exacly needed for this
    Thanks for all replays
    Regards
    Adam

    Here's the official list for CiscoWorks WLSE:
    http://www.cisco.com/en/US/customer/products/sw/cscowork/ps3915/products_user_guide_chapter09186a008052db6f.html
    I thought I saw a post a while ago about some undocumented ports used by WLSE too, but can't find it at the moment.

  • Firewall ports needed for remote management?

    Hey guys,
    Does anyone know the ports needed so that I can remotely connect to other Win7 computer through compmgmt.msc, regedit, msinfo32, remote rsop.msc, etc?  I think those are just rpc connections, but not sure.  Is it tcp 135?
    Thanks,
    Dan
    Dan Heim

    Hi Dan,
    Based on my research, remote desktop connections are via RDP instead of RPC, so the ports for Remote Desktop to work, 3389 and 443 are used mostly.
    More information for you:
    Overview of Remote Desktop Gateway
    http://technet.microsoft.com/en-us/library/cc731150.aspx
    What ports are used by a RDS deployment?
    http://social.technet.microsoft.com/wiki/contents/articles/16164.what-ports-are-used-by-a-rds-deployment.aspx
    Getting Remote Desktop to
    work thru most firewalls
    http://blog.jordanterrell.com/post/Getting-Remote-Desktop-to-work-thru-most-firewalls.aspx
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    How RPC Works
    http://technet.microsoft.com/en-us/library/cc738291(v=WS.10).aspx
    Best Regards,
    Amy Wang

  • What Network Firewall Ports Needed For Music Store?

    My PC is on a network that is firewalled to the the Internet. All ports are blocked except for those explicitely enabled, such as port 25 for E-mail, port 80 for browsing, etc.
    When the Windows Firewall is disabled, my PC cannot get past the the Music Store's home page. All links are inoperative.
    When I connect my PC to another router/firewall, that bypasses my network's firewall, I can navigate the music store.
    I believe I have a blocked port issue when the PC is connected to my network.
    Can anyone tell me what Internet/TCP ports I need to have open for the iTunes music store and for QuickTime?
    Thanks for the assist.
    Regards.

    hiya!
    Since you say that iTunes is using standard browser ports, then perhaps it's my network's Proxy Server that iTunes doesn't work well with.
    it might be worth checking on these possibilities:
    iTunes for Windows can't access the Internet if proxy settings are incorrect
    ... but also see:
    iTunes for Windows: Music Store - Using With Internet Filters or Accelerators
    love, b

  • Is SP needed for windows 8 clients?

    I run a small office with a NW6.5 server. Back in the day (20 years+), I was a support guy. I've stuck with NW since. I rarely do maintenance, so I'm always rusty. Good sign for NW!
    So we upgraded the hardware on our XP workstations twice over the years, but the XP days are setting.
    We discussed the next upgrade and decided to try to go right to win 8 if it works. We have Vista on some notebooks, but no windows 7.
    So I built up a basic workstation with windows 8. The client installed NP. I can see the network and map some drives.
    The issue is when pulling up a file from the server, it loads, then works for a few seconds, then does a long hang. Either Word or Adobe just goes into "not responding" mode for a minute or so. It finally returns after the delay.
    I'm guessing the NW server is so far off what Microsoft thinks is a secure server, that it does some sort of security check?
    So before I go looking for a client solution, I wanted to make sure there is not some server parameters I need to check. My SPs are a bit old (SP5 I think), but this server is only used internally. I'd rather not load more stuff on the server if I don't need to, but I will if needed.
    Any help would be appreciated.

    Originally Posted by chriscpmtmp
    I run a small office with a NW6.5 server. Back in the day (20 years+), I was a support guy. I've stuck with NW since. I rarely do maintenance, so I'm always rusty. Good sign for NW!
    So we upgraded the hardware on our XP workstations twice over the years, but the XP days are setting.
    We discussed the next upgrade and decided to try to go right to win 8 if it works. We have Vista on some notebooks, but no windows 7.
    So I built up a basic workstation with windows 8. The client installed NP. I can see the network and map some drives.
    The issue is when pulling up a file from the server, it loads, then works for a few seconds, then does a long hang. Either Word or Adobe just goes into "not responding" mode for a minute or so. It finally returns after the delay.
    I'm guessing the NW server is so far off what Microsoft thinks is a secure server, that it does some sort of security check?
    So before I go looking for a client solution, I wanted to make sure there is not some server parameters I need to check. My SPs are a bit old (SP5 I think), but this server is only used internally. I'd rather not load more stuff on the server if I don't need to, but I will if needed.
    Any help would be appreciated.
    If you're not already running SP8 on your NetWare 6.5 then you should be, not to specifically support Windows 8 but because it includes all sorts of improvements. There also some post-SP8 fixes you should consider installing - see http://wiki.novell.com/index.php/Nw65sp8
    Note that installing the Novell Client on Windows 8 means that you're using NCP so there should be nothing Microsoft or Windows 8 is checking.
    HTH.

  • Firewall ports needed for rpc error in powershell

    In my enviroment we use several different DMZ's to host our servers in. This creates a situation where some of the computers in the domains are in different subnets.  I am trying to run a script in one domain in which all the computers are
    in the same subnet except for 2. In this case there is a firewall between the two subnets i am describing. When i try and run my script i recieve the error below. I have verified the following ports are open on the firewall.
    TCP 5985, 5986, 445, 389    TCP\UDP 135
    I have monitored our firewall and the ports being blocked when i run my script are TCP 4754 on one server and 5002 on the other. I believe these are DCOMM ports. What other ports or range of ports, or any other ports, do I need to open to resolve
    the RPC error? I do not want to just open a bunch of unneeded ports between my DMZ's. I could just open these 2 ports and resolve the issue for now, but i am trying to make this a powershell friendly enviroment, if you take my meaning. I should mention all
    local firewalls are turned off on the servers and the script runs fine on all other servers in the subnet.
    Thank You in advance for your help
    Get-WmiObject : The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)
    At C:\Users\jthomas99\Desktop\Get-IPDetails.ps1:14 char:16
    +    $Networks = Get-WmiObject Win32_NetworkAdapterConfiguration -ComputerName $Co ...
    +                ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : InvalidOperation: (:) [Get-WmiObject], COMException
        + FullyQualifiedErrorId : GetWMICOMException,Microsoft.PowerShell.Commands.GetWmiObjectCommand
    Thanks for your help

    Here is the DCOM firewall configuration document.  It should be given to your firewall admins and they need to pay special attention to setting up the DCOM port forwarding rules.
    http://support.microsoft.com/kb/154596/en-us
    There are also instructions on how to configure DCOM ports to work with WAN/Internet access issues.
    If you are looking to obtain remote management over a WAN or the Internet you can and should set up WMF as it can be run over a fully encrypted HTTPS port and it does not require odd dynamic port allocation
    as does RPC.
    You can also set up PowerShell Web Service which does not require dynamic ports and can be routed over any port.  It uses the browser to open a PowerShell session on a remote server that can have delegated access to other servers.  DCOM cannot
    do this without making many dangerous changes t your network.
    http://technet.microsoft.com/en-us/library/hh831611.aspx
    ¯\_(ツ)_/¯

  • Port needed for File to File scenario

    Hi,
    I am new to XI, just got trained and I want to practice file to file scenario. I am able to access ID and IR.
    I would like to know whether any port have to be enabled for this scenario????
    I got list of ports from the basis people to enable the ports. could you tell me for which scenarios these ports have to be enabled:
    Http Port            50000
    ABAP Port         8000
    Msg server port 3901
    SDM Port            50018
    File Sharing Port  445
    P4 port               50004
    Enqueue server port    3201
    Dispatcher port        3200
    Sql server Port         1433
    Anymaterial to regarding port details would also be helpful.
    Thanks in advance.
    Regards,
    Kiruthiga

    Hi Kiruthiga ,
    I am new to XI, just got trained and I want to practice file to file scenario. I am able to access ID and IR.
    I would like to know whether any port have to be enabled for this scenario????
    --> Not required ..but you ask for FTP site if want to do file to file scenario using FTP . Default FTP port is 21 though ..
    using  got list of ports from the basis people to enable the ports.
    ---> tell them stop sending information which is not required..This is not the way of "Delivering. High Performance. "
    could you tell me for which scenarios these ports have to be enabled:
    Http Port 50000
    ABAP Port 8000
    Msg server port 3901
    SDM Port 50018
    File Sharing Port 445
    P4 port 50004
    Enqueue server port 3201
    Dispatcher port 3200
    Sql server Port 1433
    Any material to regarding port details would also be helpful.
    --> Friend not required...at this point. Though having knowledge is not a harm .
    Regards,

  • Additional firewire port needed for Canopus

    I have always used a Canopus to change analog video as I download onto my Mac G5 for video editing in iMovie. I recently replaced one that quit on me and now new one is not working right. Both analog and digital lights stay on, rather than one or the other depending on my need. I took it back and exchanged thinking it was broken. The second one did the same thing. Apple store said to try the firewire in the back of the tower as front one may not be working. I do not have one in the back that is not in use. Anyone have any advice?

    You could try using a firewire hub like [this one|http://www.amazon.com/gp/product/B0006BHCEK].
    Capturing video using a hub is not really recommended, but at least you would be able to leave everything connected, and do some troubleshooting.

  • Open ports needed for remote hd login

    what ports should i have open to remotely connect to my AEBS external hard drive??

    The following worked for me to access my airdisk via inet
    1: Set the AE to bridging modus
    2: If you have a firewall active, you have to forward port TCP 548 (afp) to the internal IP address of your AE. You can see the IP in the main screen of the airport utility program. It has the format 192.168.1.xx or 10.1.1.xx.
    3: Figure out your external ip address -There's widgets that do that, e.g. iStat Nano-
    You can access the airdisk as follows:
    Open finder
    Press command-k or select 'Connect to server' from the 'Go' menu.
    Type afp://external ip/name of your airdisk
    example: afp://86.354.32.45/MyDisk
    And click connect.
    Note: You must be connected to the inet from another location than yours, otherwise it won't connect.
    That's it
    Marc

  • TMG ports need for sophos 8192

    how to add a new rule for Sophos ? just for ports 8192 and 8194 not sure where to add under the tmg console under server protocols or common protocols.
    Forefront Threat Management Gateway
    Version: 7.0.9193.575
    thanks

    Hi,
    Please have a look at the article below to understand the rules in TMG.
    Planning to control network access
    http://technet.microsoft.com/en-us/library/cc441610.aspx
    Best Regards,
    Joyce

  • The ports needed for iSight video chat are blocked on networ

    Hello-
    I'm in a school dorm right now and the tech people have blocked all the ports in the 5000's and 6000's. Which means that whenever I try to video chat with my girlfriend with my iSight it only shows video, the audio doesn't transmit either way. Is there a way to fix this problem? Thank.

    Unfortunately, there is no way to circumvent the issue. If ports are being blocked by the sysadmin, then there's nothing you can do short of trying to convince him/her that you're a good student and not doing anything bad to harm the campus network.
    Alternatively, there are other clients you can use such as iVisit that might work, but not nearly as well as iChat.
    -Ryan

  • NAT configuration and Port Mapping for xBox

    I'm looking for help with port mapping to open up the NAT for an xBox One. I'm working with the following network devices:
    xBox One
    DSL Modem: Embarq (ZyXEL) 660R series
    Airport Extreme version 7.7.3
    I understand the following from researching the issue:
    The default settings for both devices block the ports needed for xBox Live.
    Airport Extremes are not on the compatible list for xBox.
    Port Mapping is better then creating a DMZ for the xBox.
    The xBox needs its own manually set IP address.
    I switched my Network>Router Mode from Off (Bridge Mode) to DHCP and NAT. I then created a DHCP Reservation and the Port Settings for that IP.
    After doing this, the Airport would restart and display a warning - Double NAT. I figured this was because the 660 settings showed the NAT Mode to be SUA Only. The Edit Details link displayed an empty table where you edited the SUA/NAT Server Set. I switched from NAT Mode>SUA Only to None. So there was my Double NAT and I would have thought that would have removed one.
    I also disabled the Firewall and Enabled the UPnP.
    After restarts the Airport continued to display the Double NAT error. However, with the 660's NAT Mode set to None, the Internet was not there. Web browsers and email accounts replied with server not found.
    Only with the 660 set to SUA Only and the Airport in Bridge Mode is the Internet accessible. I now have the details for the SUA filled out for the xBox's IP address and ports.
    Hypothesis
    Since both devices are acting as DHCP servers the port mapping is not working. Rather then have the 660 distribute IP addresses and then having the Airport distribute another range of numbers, I need to have both devices bridge and distribute one range of numbers. Currently the 660 is using the 192.168 range and the Airport is using the 10.0 range.
    Am I correct? Any thoughts and suggestions are welcome.

    Port forwarding through a double NAT.. is near impossible.. !!
    And the xbox is so attuned to using UPNP it is very hard not to.. even port mapping is not a great fix. Since apple decided gamers did not count as users for Airports.. I think honestly it is best to bypass the airport and stick to upnp from the modem router.
    What method of authentication does your ISP use? Because it is really better to use one router.
    And in fact the router should be the Zyxel. If you plug the Xbox to the Zyxel running in full router mode, with the airport removed from the network does it work and open NAT??
    If not replace the Zyxel with a modern listed router that is xbox compatible and bridge the airport to it.

  • Snow Leopard Firewall Ports Needed

    Is there a document that contains all of the ports needed for iCal Server, Address Book Server, and all of the other mobile services? The documentation says to check the resources however, I have not been able to find anything specifically from apple.
    Thanks!
    Jeff

    I had the same problem as you, by the sounds of it. When I installed Snow Leopard Server on a mini, it went through the motions of configuring the attached Airport base station NAT settings to support the services I had turned on. Unfortunately, that configuration either didn't stick, or the Airport lost the settings in the restart. Here's where I posted a question about this experience: http://discussions.apple.com/thread.jspa?messageID=10318987&#10318987
    Like you, I've been redirected to that "well know" list on several occasions, but it doesn't quite answer the question we both seem to have which is: +If Snow Leopard Server had successfully configured the NAT port settings on my Airport router, what would that configuration look like?+ Or, put in other terms: +What are just the ports I need to open on my Airport router to adequately support my installation of Snow Leopard Server?+
    Of course, it all depends on what services you have enabled, so it would be helpful if the list could be broken down by service type.
    Yes, the sure would save wading through that massive "well know" ports list to find just the few you need to manually configure the Airport...

Maybe you are looking for