Ports required at server

I either am not seeing it or I'm blind, OK, don't answer that.
I can't seem to find out what ports are required to be open on a ZESM server.
Could anyone help me out there?
Thanks,
Dan

dverbargnov,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

What are the ports required for the Audio, Video and A/V conferencing when the following end points are enabled for QoS in Lync 2013 server?

Hi All,
What are the ports required for the Audio, Video and A/V conferencing when the following clients are enabled for QoS in Lync 2013 server?
Client Type
Port range and Protocol required for Audio
Port range and Protocol required for
Video
Port range and Protocol required for
A/Vconferencing
Windows Desktop Client
Windows mobile App
Iphone
Ipad
Andriod phone
Andriod Tablet
MAC desktop client
Please advise. Many Thanks.

Out of the box, 1024-65535 for all of the client ports. :)
https://technet.microsoft.com/en-us/library/gg398833.aspx
You'll want to tune your client ports a bit
https://technet.microsoft.com/en-us/library/jj204760.aspx as seen here, and then the client ports would use those ranges which is easier to set QoS markings. I'm not sure the mobile clients respect that setting.
Elan's got the best writeup for Windows clients here:
http://www.shudnow.net/2013/02/16/enabling-qos-for-lync-server-2013-and-various-clients-part-1/
However, the marking of the packets is the tricky part. Windows can do it via Group Policy, but for the other clients you'll need to have the network specifically prioritize ports regardless of DSCP markings. You have to do it based on ports
as the traffic could be peer to peer.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Ports required to be opened for Financial Reporting Studio Client access

Hi Everyone,
What are the exact ports which are required to be opened between the client machines and the Report Server so that users are able to use the Reporting Studio. (I guess opening port 8200 only will not suffice, will it?)
Thanks,
Sayantan

Sayantan,
Chapter 15 of the Financial Studio Report documentation (http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/fr_user.pdf) specifically pages 300 to 311 explain the default setup ports, the amount of Essbase ports required and such.
JTS

Ports Required for SMTP access from DMZ

We have a Windows 2000 Adv Server on a DMZ interface of a PIX firewall. We are using native Windows SMTP services as a Front End server for Exchange mail. Our Exchange server has a SmartHost entry that sends outbound mail to the server on the DMZ. Our MX record points to the server on the DMZ for inbound traffic.
We originally allowed DNS resolution and SMTP (Port 25) traffic to the server. We've done this numerous times from the Internal interface of the PIX. Yet, there apparently is at least one other port that needs to be opened up because the mail stays in the Queue of the SMTP server on the DMZ. We got around the problem by opening up all outbound ports from that server.
My question is: "Does anyone know what ports are required for an SMTP server to work on a PIX DMZ?"
Thanks

Should just be TCP/25 and probably DNS (UDP/53). Probably the easiest way to figure out what other port it's using is to look at the active connections from this going through your PIX.
Let's say the IP address of the mail server is 10.1.1.1. Doing:
sho conn | include 10.1.1.1
will give you all the connections. This will tell you where it's connectig to and on what ports. The output will look something like:
FW1(config)# sho conn | incl 10.1.1.1
UDP out 10.2.2.1:17127 in 10.1.1.1:10655 idle 0:01:23 Bytes 1000
UDP out 10.2.2.1:18733 in 10.1.1.1:10477 idle 0:01:38 Bytes 1000
UDP out 10.3.3.2:18429 in 10.1.1.1:10789 idle 0:01:10 Bytes 1000
The numbers after the colons are the port numbers on the connection. Of course yours will show TCP and port 25 (and something else hopefully), but you get the idea.

Ports Required for SCCM Distribution point

Hi All,
Can anybody tell me the ports required for distribution point. as in I have a site server with distribution point in HO, i want to have a distribution point server on a remote site. i went through the microsoft document which says u require port 445 open between site server and distribution point and it says u only require port 80 or 443 open between distribution point and branch distribution point. little confused!!!. which ports i require to be open between site server with distribution and remote site distribution point.
Cheers.

Hi,
Regarding the doc here:
http://technet.microsoft.com/en-us/library/bb632618.aspx
Site Server -- > Distribution Point
SMB 445 TCP
RPC Endpoint Mapper 135 UDP and TCP
RPC dynamic TCP
Site Server < -- > Site Server
SMB 445 TCP
Point to Point Tunneling Protocal (PPTP) 1723 TCP
Follow me through my blog and Twitter!

Port required by 12.1.3

HI
I have a requirement to install EBS 12.1.3 on a Linux server, which already host some oracle and non-oracle applications.
I want to check beforehand if all the ports required by EBS are available or not.
is there any utility or tool which I can use to check if all ports are free or do I have to check every port manually using netstat command?
Thanks

dba88 wrote:
HI
I have a requirement to install EBS 12.1.3 on a Linux server, which already host some oracle and non-oracle applications.
I want to check beforehand if all the ports required by EBS are available or not.
is there any utility or tool which I can use to check if all ports are free or do I have to check every port manually using netstat command?
Thanks
Please see previous threads which discuss the same topic -- https://forums.oracle.com/community/developer/search.jspa?q=List+AND+Ports+AND+EBS
Thanks,
Hussein

Lync onpremise, exchange online and UM ports requirement

Hello Team,
Could you, please point us to the relevant articles or answer my question in the email.
For the scenario with Lync on-premises and Exchange on-premises there is a requirement to have 60000-64000 ports open between Lync client and UM server in both directions for
SRTP/RTCP traffic. Our questions are:
1.
What are ports requirements for Lync 2013 on-premises with Exchange UM in Office 365?
2.
How to limit ports used by client for UM traffic? (is it with
Set-CsConferencingConfiguration?_
Please advise. MANY THANKS.

Hi SBHV,
As far as I know, it does not require special port.
You need to configure the Edge Server for federation, because the traffic will through Edge.
60000-64000 ports won’t be used in this case, they are used with on-premises.
Best regards,
Eric

Port required for Veritas cluster implementation

hello there ,
i need to know what are the port required for veritas cluster implementation on Sun Messaging Server 6.2 . anybody care to help me on this ?
thanks

> We are planning a 2 node Oracle 9i RAC cluster on Sun
Cluster 3.Good. This is a popular configuration.
Can you please explain these 2 questions?
1)
If we have a hardware disk array RAID controller with
LUNs etc, then why do we need to have Veritas Volume
Manager (VxVM) if all the LUNS are configured at a
hardware level?VxVM is not required to run RAC. VxVM has an option (separately
licensable) which is specifically designed for OPS/RAC. But if
you have a highly reliable, multi-pathed, hardware RAID platform,
you are not required to have VxVM.
2)
Do we need to have VxFS? All our Oracle database
files will be on raw partitions.No.
IMHO, simplify is a good philosophy. Adding more software
and layers into a highly available design will tend to reduce
the availability. So, if you are going for maximum availabiliity,
you will want to avoid over-complicating the design. KISS.
In the case of RAC, or Oracle in general, many people do use
raw and Oracle has the ability to manage data in raw devices
pretty well. Oracle 10g further improves along these lines.
A tenet in the design of highly available systems is to keep
the data management as close to the application as possible.
Oracle, and especially 10g, are following this tenet. The only
danger here is that they could try to get too clever, and end up
following policies which are suboptimal as the underlying
technologies change. But even in this case, the policy is
coming from the application rather than the supporting platform.
-- richard

Enterprise Service Bus Port Requirements

What are the minimum ports required to open to have ESB work with firewalls. The topology will be
users ------> |(firewall) ESB server ------> |(firewall) database server
HTTPS needs to go through a firewall to reach the ESB server. The ESB needs to go through a firewall to get to database servers. So far it looks like 443 through the first firewall and 1521 through the second. But what about JMS what port and where. Is there anything I'm missing. Can it managed via 443 or does 8888 need to be opened.

hi there,
for an introduction have a look <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d86cf1a4-0701-0010-409d-c568b1d2519e">here</a>.
For more in-depth information search <a href="http://help.sap.com">SAP Help</a> for XI & BPEL, e.g. <a href="http://help.sap.com/saphelp_erp2004/helpdata/en/ce/1d753cab14a909e10000000a11405a/frameset.htm">this</a>.
hope that helps,
anton

Ports required during installation

Hi,
We have to install the SAP Portal 7 in a distributed environment on the extranet server. Each (db, scs and CI) server has firewalls installed.
I want to identify the ports that would be required to be opened for the installation and functioning of portal.
I have identified the following ports on SCS and CI
SAPINST Ports 21200, 21212, 4239,
Message Server 50000, 3300, 3200, 3900
I have identified the following ports on DB
SAPINST Ports 21200, 21212, 4239
Listener Port 1527, 3200, 3300, 3900
Could you please add/ modify the current list of ports required to be opened?
Thanks,
Antarpreet

Hi,
Basically, the port numbers are as follows:
32XX, 33XX, etc. where XX is your instance number. Since you wrote 00 above, you have listed the ports only for the instance which would be having the nr as 00. Mostly that would be CI. But your SCS would be having a different instance nr. So please consider that also in this list.
Other than the ports you listed here, all the other ports that you will ever need to use in SAP NW AS Java are listed at:
http://help.sap.com/saphelp_nw70/helpdata/en/7c/9817be794d804c920aaed073b7b0ed/frameset.htm
Regards,
Shitij
Edited by: Shitij Bagga on May 13, 2010 4:10 PM

How to find all JMX ports on a server?

How to find all jmx ports on particular server (say localhost) on windows
I have multiple JVM's running on my local server, and there is extensive use of JXM mbeans by the applications running on each server. So I want to connect to all these JMX servers and to instrument the MBeans using Jconsole(Jconsole localhost:<port>). But I don't know the port numbers, and its not logged by the application.
How do I find all the ports jmx servers connected?
Note : In my case I can not instrument using the PID.
thanks,
bala K

Hi kajbj,
I tried stop/start the application, but couldn't find any difference in the netstat command. I know it should show the JMX port (I am able to see on a test application), but this application's JMX port usage is missing.
netstat -ano --> Do i need to use any other commands?
I just injected few lines of code ( to list the MBeanServers programatically), to this application (did some usual tweaks to let this code execute at some time) and its listing couple of MBeanServers and lot of MBeans.
MBeanServerFactory.findMBeanServer(null); and so on.....
Is there a way to get the port using the Management API's?
thanks,
bala K

FIM Reporting Services Port requirements

Hi ,
Can anybody let me know what are the communication ports required for deploying fim reporting services.
I am unable to complete the installation.any help would be greatly appreciated.
Regards
Dushyant singh

When using SCSM 2012 (SP1) you also have to install the analytic services on the instances. I can't remember exactly if it was on the DW or MS, but it would tell you during the installation of it.
And make sure your FIM version is at leat 4.1.3451, I went through a lot of pain with version 4.1.3419 en the
KB256143 error.
Find me on linkedin: http://nl.linkedin.com/in/tranet

Does clustered MSDTC require Application Server role in Windows 2008 R2?

I'm reviewing a windows 2008 R2 2-node Active/Passive cluster which has clustered MSDTC and SQL Server.   The strange thing is that Application Server role is not installed. I thought MSDTC requires Application Server role in order to be
clustered.

Hi Mark,
I look into this more and it seems to me the Application Server role (at least for the Distributed Transactions area) is just another way to configure Distributed Transaction Coordinator instead of using the Component Services Administrative Tool.
Also, the configuration has nothing to do with clustering.   So, MSDTC requires configuration regardless of clustering or not and the configuration can be done through Application Server role and/or Component Services Administrative Tool.
Is my understanding correct?
Thanks.

How to disable nonsecure port in Directory Server 5.2

We have recently upgraded from Directory Server 5.1 to 5.2. With version 5.1, you could set the non-secure LDAP port to be 0, and that would disable connections to the non-secure port. Version 5.2 doesn't allow you to do this. I tried from the console, and even changed it manually in the dse.ldif file, and neither method worked. Is there any way to disable the non-secure port for Directory Server 5.2?
Thanks!

I have found the simplest way is to lock the nonsecure port down to the localhost using
listenhost: 127.0.0.1
This means that it won't answer outside queries on that unsecured port, but it still has the advantage of allowing you to use it locally (which can save on the typing a bit).
Note you can of course set this to any ip or range for example 24.24.*
This also works for the secure port using securelistenhost: (I think that's the spelling but didn't check.)
Ward

On which port number WDS server will listen & service when installing on server which is also DHCP server?

hi frineds
in documents we read when we install WDS on the server which is also DHCP server, we must select this check mark :
"do not listen on port 67"
it means we instruct the WDS service not to listen on port UDP 67 to avoid a port conflict between WDS server service and DHCP server service.
So now on which port number WDS server will listen & service ?
thanks in advance

Hi john.s2011,
If Windows Deployment Services and DHCP are running on the same physical computer, this means that the DHCP server is listening on port 67 and is responsible ensuring authorization.
The related KB:
How the PXE Server Works
http://technet.microsoft.com/en-us/library/cc732649(v=ws.10).aspx
The related thread:
DHCP is not responding for WDS
http://social.technet.microsoft.com/Forums/windowsserver/en-US/07f98ac7-cc6f-4385-ba21-2e85bb460c03/dhcp-is-not-responding-for-wds
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
hi Alex.
sorry for delay
thanks a lot
regards

Ports required at server

Similar Messages

Maybe you are looking for