Ports required for Goldengate Setup 7809......

hi,
i am using default port 7809 on my server.we have also firewall. we have just open only one port.i.e 7809 Telnet srev2 7809... connected
but problem in data pump process, can't be establish the Network connection with remote server.
So is there any other ports that should be open on Source & Target server as well.
Regards,
AMSII

1.Paste your source and target mgr.prm and data pump paramater files entries.
2. What is the exact error message in report file?
3. Did you open port for source system as well as target systems?
for more details ,
Assigning Manager a port for local communication
The Manager process in each Oracle GoldenGate installation requires a dedicated port for communication between itself and other local Oracle GoldenGate processes. To specify this
port, use the PORT parameter in the Manager parameter file. Follow these guidelines:
1. The default port number for Manager is 7809. You must specify either the default port number (recommended, if available) or a different one of your choice.
2. The port must be unreserved and unrestricted.
3. Each Manager instance on a system must use a different port number.
Use the DYNAMICPORTLIST parameter to specify a list of available ports to which the following,
local Oracle GoldenGate processes can bind for communication with a remote Oracle GoldenGate process:
● Collector: to communicate with a remote Extract to receive incoming data.
● Replicat: to communicate with a remote Extract to receive data during an initial load task.
● Passive Extract: to communicate with a remote Collector
● GGSCI: to issue remote commands
Hopefully this will help you
Annamalai.

Similar Messages

Ports required for GG setup (Oracle to Oracle replication )

GG version: 11.2.1.0.1
OS : RHEL 5.4
We are going to configure GoldgenGate which is going to replicate the DMLs for few tables (Uni-directonal) from source to target.
Since there is a firewall between source and target, We need to request the network team to open ports at both source and target servers.
For manager process , we are going to use the default 7809 both at source and Target. What are the other ports that we need to request the network team to open for both servers ?

Hi,
If a firewall is being used at an Oracle GoldenGate target location, additional ports are required on the target system to receive dynamic TCP/IP communications from remote
Oracle GoldenGate processes. These ports are:
● One port for each Collector process that is started by the local Manager to receive propagated transaction data from remote online Extract processes. When an Extract
process sends data to a target, the Manager on the target starts a dedicated Collector process.
● One port for each Replicat process that is started by the local Manager as part of a remote task. A remote task is used for initial loads and is specified with the RMTTASK
parameter. This port is used to receive incoming requests from the remote Extract process.
● Some extra ports in case they are needed for expansion of the local Oracle GoldenGate configuration.
● Ports for the other Oracle GoldenGate products if they interact with the local Oracle GoldenGate instance, as stated in the documentation of those products.
To specify these ports, use the DYNAMICPORTLIST parameter in the Manager parameter file.
Follow these guidelines:
● You can specify up to 5000 ports in any combination of the following formats:
7830, 7833, 7835
7830-7835
7830-7835, 7839
● The ports must be unreserved and unrestricted.
● Each Manager instance on a system must use a different port list..
Although not a required parameter, DYNAMICPORTLIST is strongly recommended for best performance. The Collector process is responsible for finding and binding to an available
port, and having a known list of qualified ports speeds this process. In the absence of DYNAMICPORTLIST (or if not enough ports are specified with it), Collector tries to use port 7840 for remote requests. If 7840 is not available, Collector increments by one until it finds an available port. This can delay the acceptance of the remote request. If Collector runs out of ports in the DYNAMICPORTLIST list, the following occurs:
● Manager reports an error in its process report and in the Oracle GoldenGate ggserr log.
● Collector retries based on the rules in the Oracle GoldenGate tcperrs file
For more information about PORT and DYNAMICPORTLIST, see the Oracle GoldenGate Windows and UNIX Reference Guide.
Hopefully this will help you
Annamalai.

What are the ports required for the Audio, Video and A/V conferencing when the following end points are enabled for QoS in Lync 2013 server?

Hi All,
What are the ports required for the Audio, Video and A/V conferencing when the following clients are enabled for QoS in Lync 2013 server?
Client Type
Port range and Protocol required for Audio
Port range and Protocol required for
Video
Port range and Protocol required for
A/Vconferencing
Windows Desktop Client
Windows mobile App
Iphone
Ipad
Andriod phone
Andriod Tablet
MAC desktop client
Please advise. Many Thanks.

Out of the box, 1024-65535 for all of the client ports. :)
https://technet.microsoft.com/en-us/library/gg398833.aspx
You'll want to tune your client ports a bit
https://technet.microsoft.com/en-us/library/jj204760.aspx as seen here, and then the client ports would use those ranges which is easier to set QoS markings. I'm not sure the mobile clients respect that setting.
Elan's got the best writeup for Windows clients here:
http://www.shudnow.net/2013/02/16/enabling-qos-for-lync-server-2013-and-various-clients-part-1/
However, the marking of the packets is the tricky part. Windows can do it via Group Policy, but for the other clients you'll need to have the network specifically prioritize ports regardless of DSCP markings. You have to do it based on ports
as the traffic could be peer to peer.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Ports Required for SCCM Distribution point

Hi All,
Can anybody tell me the ports required for distribution point. as in I have a site server with distribution point in HO, i want to have a distribution point server on a remote site. i went through the microsoft document which says u require port 445 open between site server and distribution point and it says u only require port 80 or 443 open between distribution point and branch distribution point. little confused!!!. which ports i require to be open between site server with distribution and remote site distribution point.
Cheers.

Hi,
Regarding the doc here:
http://technet.microsoft.com/en-us/library/bb632618.aspx
Site Server -- > Distribution Point
SMB 445 TCP
RPC Endpoint Mapper 135 UDP and TCP
RPC dynamic TCP
Site Server < -- > Site Server
SMB 445 TCP
Point to Point Tunneling Protocal (PPTP) 1723 TCP
Follow me through my blog and Twitter!

Ports required for voice gateway registration

Hi,
Currently our remote office voice gateway is trying to register to the CM and in between there is a firewall. We have opened port DNS, NTP, 2427 and 2428 but it still showing registering to the call manager. What other ports shall we open to make it works?
What about the port requirement for CUE?
Thanks.

For MGCP:
DNS
NTP
UDP 2427
TCP 2428
TFTP (UDP 69)
For CUE, here is a link you may find helpful:
http://www.cisco.com/en/US/partner/netsol/ns340/ns394/ns165/ns391/networking_solutions_design_guidance09186a00801f8e31.html#wp41149
hth,
nick

Port required for Veritas cluster implementation

hello there ,
i need to know what are the port required for veritas cluster implementation on Sun Messaging Server 6.2 . anybody care to help me on this ?
thanks

> We are planning a 2 node Oracle 9i RAC cluster on Sun
Cluster 3.Good. This is a popular configuration.
Can you please explain these 2 questions?
1)
If we have a hardware disk array RAID controller with
LUNs etc, then why do we need to have Veritas Volume
Manager (VxVM) if all the LUNS are configured at a
hardware level?VxVM is not required to run RAC. VxVM has an option (separately
licensable) which is specifically designed for OPS/RAC. But if
you have a highly reliable, multi-pathed, hardware RAID platform,
you are not required to have VxVM.
2)
Do we need to have VxFS? All our Oracle database
files will be on raw partitions.No.
IMHO, simplify is a good philosophy. Adding more software
and layers into a highly available design will tend to reduce
the availability. So, if you are going for maximum availabiliity,
you will want to avoid over-complicating the design. KISS.
In the case of RAC, or Oracle in general, many people do use
raw and Oracle has the ability to manage data in raw devices
pretty well. Oracle 10g further improves along these lines.
A tenet in the design of highly available systems is to keep
the data management as close to the application as possible.
Oracle, and especially 10g, are following this tenet. The only
danger here is that they could try to get too clever, and end up
following policies which are suboptimal as the underlying
technologies change. But even in this case, the policy is
coming from the application rather than the supporting platform.
-- richard

Ports Required for SMTP access from DMZ

We have a Windows 2000 Adv Server on a DMZ interface of a PIX firewall. We are using native Windows SMTP services as a Front End server for Exchange mail. Our Exchange server has a SmartHost entry that sends outbound mail to the server on the DMZ. Our MX record points to the server on the DMZ for inbound traffic.
We originally allowed DNS resolution and SMTP (Port 25) traffic to the server. We've done this numerous times from the Internal interface of the PIX. Yet, there apparently is at least one other port that needs to be opened up because the mail stays in the Queue of the SMTP server on the DMZ. We got around the problem by opening up all outbound ports from that server.
My question is: "Does anyone know what ports are required for an SMTP server to work on a PIX DMZ?"
Thanks

Should just be TCP/25 and probably DNS (UDP/53). Probably the easiest way to figure out what other port it's using is to look at the active connections from this going through your PIX.
Let's say the IP address of the mail server is 10.1.1.1. Doing:
sho conn | include 10.1.1.1
will give you all the connections. This will tell you where it's connectig to and on what ports. The output will look something like:
FW1(config)# sho conn | incl 10.1.1.1
UDP out 10.2.2.1:17127 in 10.1.1.1:10655 idle 0:01:23 Bytes 1000
UDP out 10.2.2.1:18733 in 10.1.1.1:10477 idle 0:01:38 Bytes 1000
UDP out 10.3.3.2:18429 in 10.1.1.1:10789 idle 0:01:10 Bytes 1000
The numbers after the colons are the port numbers on the connection. Of course yours will show TCP and port 25 (and something else hopefully), but you get the idea.

Hardware required for RAC setup at home

Hi All,
Could you please suggest the Hardware required for practicing RAC at home.
Regards,
VN

Hi, "user7202581",
For practicing purposes, you could consider a VBox / OVM based setup at home. We have used those for Hands On Labs in the course of Oracle Open World more than once. I recommend you use a machine with at least 8GB memory and dual core (HT enabled) processors. Some configuration examples: Lenovo Laptop, ThinkPad, 8GB, 320GB HDD, i5 dual core, 2.5 GHz, Win 7 or a Mac Mini, latest version, i5 dual core, 2.3GHz and 8GB memory would do the trick for a two node cluster. Note that I mention the hosting OS in case you use VBox. For OVM based setups you either have to use a dual boot system or use a dedicated machine. You will be somewhat restricted with respect to the hardware failures you can impose on this system obviously (due to the VM setup), but for practicing purposes, you should find those environments sufficient, I think. Also see: RAC on OVM templates: http://www.oracle.com/technetwork/server-storage/vm/rac-template-11grel2-166623.html
Hope that helps. Thanks,
Markus

Firewall Ports Required for NAC manager to manage/add Cisco switch

Hi,
I am trying to add cisco switches to the NAM, however i am not able to add the switch as I am getting the error "unable to control switch" I have tried to open ports 161-162 on the firwall; if i was to allow any traffic between the NAM and switch, the cisco NAM is able to add/manage the switch.
Not sure what other ports may be required for cisco NAM to manage the switch?
Thanks.

Hi,
AFAIK, only the UDP ports 161-162 for the SNMP communication need to be open.
Please make sure you have configured the correct port on the switch:
(config)# snmp-server host 172.16.1.61 traps version 2c cam_v2 udp-port 162 mac-notification snmp
If still not working i would check the logs on the firewall for any blocked traffic between the CAM and the switch.
HTH,
Tiago
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.

Ports required for communication between Web servers and service applications (the default is HTTP)

We're using SharePoint 2010, I'm the system admin for a SharePoint farm. We enabled SharePoint Search by adding a Search Service APplication. One of the crawl report timer job is failing every 5 minte with the error "Cannot connect to remote server".
After digging around, we found that the server running the timer job tries to connect to the SearchAdmin.svc on the index server, over HTTPS / port 32844 However, communication over SSL via a non default port is blocked by our firewall.
According to this article: https://technet.microsoft.com/en-us/library/cc262849.aspx the default is HTTP for communication
between web servers. How is it possible that it's trying to connect over SSL?

Hi,
Quoted from
https://technet.microsoft.com/en-us/library/cc262849.aspx#ServiceApp :
You can change the protocol and port binding for each service application. On the Service Applications page in Central Administration, select the service application, and then click
Publish.
Here is an article for configuring Windows firewall port rules for SharePoint using PowerShell in case you need:
http://www.xylos.com/default.aspx?id=1050
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Hardware requirements for RAC Setup on Linux

Hi,
Can any body help me...We are soon going for the RAC setup on linux operating system.So,i need to provide the customer,the hardware needed for this setup.
Please send me the list of all the things right from small things....
regards,
Mohammed

Hi Mohammed,
In addition you may find good information in below doc:
http://download.oracle.com/docs/cd/B19306_01/rac.102/b28759/toc.htm
Regards,
Marcello M.

BPM - Requirement for CCMS Setup?

Hi all,
In the BPM setup guide, it says: "The Computing Center Management System or CCMS Alert Monitor (transaction /nrz20) provides the underlying monitoring infrastructure for Business Process Monitoring."
Is there any further information on exactly what CCMS Setup is required at a minimum in the Solution Manager and in the Monitored system for BPM to function correctly?
I read the technical prerequisites which are described in SAP notes 784752 - "BPMon in SAP Solution Manager - Prerequisites" and 521820 - "Availability of Business Process Monitoring". The first note does not reference CCMS, and the second one only makes reference to it if you want to use "CCMS Monitors" in BPM.
Thanks for any guidance on this,
Regards,
John

Hi JD
To use CCMS monitoring in BPMon, 1st, please implement Note 1293668 as described in Note
521820. This note fix the problem of CCMS monitoring related problem.
>Description of note 521820
>(d) CCMS Monitor
>If you plan link any CCMS monitors from the managed systems into
>Business Process Monitoring implement SAP Note 1293668.
About the procedure, you just need to copy and past MTE from RZ20 of related system.
In more detail, please refer to the document in below.
http://www.service.sap.com/bpm
->Technical information
->->Setup Guide - Interface Monitoring
Page 78 describe the steps on CCMS monitoring setup.
(Originally this description is for one of the monitoring topic for PI area.
Create MTE for PI and by using CCMS monitoring of BPMon, include the MTE to the BPMon.
But the page above exactly describe the step that you need to do for CCMS monitoring.
This apply for your case as well).
Best Regards
Keiji Mishima

Ports Required for SCCM 2012 Distribution point

I think below are the port need to open for distribution point instalaltion
Site Server -- > Distribution Point
SMB 445 TCP
RPC Endpoint Mapper 135 UDP and TCP
RPC dynamic TCP
my question here is for install Distribution point instalaltion , only
Site Server -- > Distribution Point one way port open is enough? or do we need to open both ways?

One way is enough for a standard Distribution Point. All distribution is initiated by your Primary site server by the Package Transfer Manager.
Regards,
Nickolaj Andersen | www.scconfigmgr.com | @Nickolaja

Ports required for Flash Player?

What ports are required to be open by Flash Player 10 Active X?

Hi,
Regarding the doc here:
http://technet.microsoft.com/en-us/library/bb632618.aspx
Site Server -- > Distribution Point
SMB 445 TCP
RPC Endpoint Mapper 135 UDP and TCP
RPC dynamic TCP
Site Server < -- > Site Server
SMB 445 TCP
Point to Point Tunneling Protocal (PPTP) 1723 TCP
Follow me through my blog and Twitter!

Ports required for VPN (L2TP)?

I am having problems getting my VPN (L2TP) working. I have opened up port 1701, do any other ports have to be opened up for the VPN to work?
Thanks
Tony

4500/udp (ipsec) and 500/udp (isakmp) as well. You also need to open Protocol ESP on your firewall. If you travel past a NAT router that one needs to be capable of IPsec as well.
MacLemon

Ports required for Goldengate Setup 7809......

Similar Messages

Maybe you are looking for