Ports that need to be Opened for OBIEE 11g Installation on Solaris Box

What ports need to be opened by the systems admin on a solaris box to start OBIEE 11g installation

There is lot difference what you said now and in your initial post...
For outside communication means? you want to access BI outside the network using url?
in that case is it not weblogic port? check with your network guys they'll take care of it.
if you are looking for network with other systems internally then you may/have to open as per that link.
hope this helps

Similar Messages

List of ports that need to be opened?

Hi,
A customer is using a citrix client to log on to their citrix server, which is running a B1 client. They are getting errors in relation to the connection to the licence server failing, even though they have opened the port (30000) in question to allow access.
Do you have a list of ports/are there any other ports as standard that need to be opened for the client install to connect to the license server?
Thanks.

David,
Try to browse this link:
http://support.citrix.com
there is a search function that you could use to find out the port or also issue regarding to citrix
Rgds,

Need help with opatch for OBIEE 11g

I'm running into some more of Oracle's typical gibberish and poorly written documentation, and need some help patching OBIEE 11g.
I'm TRYING to follow the instructions here:
https://updates.oracle.com/Orion/Services/download?type=readme&aru=13160647
So, let's see. How about step 2:
For FMW Opatch usage, please refer the doc at :
http://www.oracle.com/technology/software/products/ias/files/fmw_opatch.htm
Well, that IP address automatically redirects to the general download page:
http://www.oracle.com/technetwork/indexes/downloads/index.html
Nice.
So, let's try this doc:
http://docs.tpu.ru/docs/oracle/en/owl/E14571_01/doc.1111/e16793/opatch.htm#CBHDEGBJ
Section 2.3.2, "Patching a Fusion Middleware Product"
Quoting: "Once you obtain the patch, determine the Oracle home directory to which you are going to apply the patch....If you do not know the name of your Oracle home, you should run the opatch lshomes command as described in Section 2.4.6, "Listing the Applicable Oracle Homes for a Patch" to obtain a list of Oracle homes that pertain to the domain."
So let's see, I've got two OPATCH.BAT files, one in c:\mw_home1\Oracle_BI1=OPatch\, and the other in c:\mw_home1\oracle_common\OPatch\.
I open a command window, CD to one of those paths, and run opatch lshomes. I get this error:
"The Oracle Home C:\mw_home1 is not OUI based home. Please give proper Oracle Home. OPatch returns with error code = 1. OPatch failed with error code = 1"
Same results for the other opatch.bat in the other directory.
Besides the atrocious grammar, this error message is not helpful in the least. I'm trying to patch OBIEE 11g, which is installed in c:\mw_home1. What else is opatch wanting?

Yes, the error message is misleading. It should say something like "Environment variable ORALCE_HOME has not been set or set incorrectly".
Here is how I solved the problem on a Windows Oracle Fusion Middleware SOA installation. The SOA installation already comes with OPatch installed. In my case it is located in D:\Oracle\Middleware\Oracle_SOA1\OPatch. On a command prompt, I set the environment variable ORACLE_HOME like this
set ORACLE_HOME=D:\Oracle\Middleware\Oracle_SOA1
and the CLASSPATH variable like this
set classpath=
The latter prevents opatch from loading classes it does not need and throwing java.lang.ClassNotFoundException. Also notice ORACLE_HOME does not point to D:\Oracle\Middleware but D:\Oracle\Middleware\Oracle_SOA1. I made a mistake by setting ORACLE_HOME to D:\Oracle\Middleware kept getting:
"Recommended actions: Please make sure no other OPatch or OUI processes is running. Try to run $ORACLE_HOME/oui/bin/runInstsaller.
OPatch failed with error code = 20"
I wasted a lot of time trying to figure out what went wrong.

OBIEE 11g Installer

Hi,
I am trying to install OBIEE 11g and as per the installation document I need to have OBIEE Installer to start with installation. The document points to
Download Oracle Business Intelligence 11g Installer .zip file from OTN at the
following link:
http://www.oracle.com/technology/software/products/middleware/htdocs/111110_fmw.html
This takes to the page with listing to download Weblogic installer instead. Is it the same installer I need to use eve for obiee 11g or the link is wrong.
Appreciate if someone can point to correct location.
Also, RCU zip file donot have any setup or any such file. Which file I should launch to get RCU running?
Appreciate if some one can provider pointer to this.
Thanks,
Ritesh

Hi,
Thanks a bunch. I just got carried away by document.
Thanks again for the pointer.
Ritesh

Which ports need to be open for messages and facetime to work properly?

I noticed that Messages no longer works since upgrading to Yosemite on my work network. But it did when i was in Mavericks. Did they change something in Messages in the upgrade that would cause it to no longer work? ports?
I'm behind my work firewall, which ports need to be open for messages to work properly?

Just make sure your 9001 port is open.
Hope this works..
Hamid

What ports need to be opened for Podcasting?

To all,
I am a little lost. We have a server which is inside our firewall. What we're trying to do is to use this server as a test bed for podcasting. Our network admin is going to set it up so that it's behind the firewall but we can still access the content from home or anywhere. Now my question. The admin has asked us what ports need to be opened for podcasting. We have no idea. Is this something we need to setup on the server we are using or is there something else.
FYI - We are using a Windows NT server...I know, I know, I need to upgrade.
Any help is greatly appreciated. Thank you in advance.
zanm
Other OS windows NT server

Podcasting is not streaming on content, only downloading. It is basically a blog with an attachment in the RSS feed. Only port 80 (normal web port) needs to be able to go through the firewall.

What TCP/UDP ports need to be open for VPN Client version 4.8?

What TCP/UDP ports need to be open for Cisco VPN Client version 4.8 to work?
Thanks,

Normally, you need the following ports and protocol :
UDP 500
UDP 4500
ESP
In case, you are using IPSec over TCP you have to open, TCP port 10000 or any other port you want to use for IPSec connections (Its configurable).
-Kanishka

Do router/firewall ports need to be opened for higher bandwidth?

Currently I use iChat between myself and my mom across town with decent results. The video is blurred but extremely smooth.
We are both on broadband with different ISPs (Telus & Shaw) with our own routers. None of the ports on either router are open for iChat yet we connect fine.
If I opened up iChat ports on both routers will that allow more bandwidth to flow through the video resulting in less blur?

Hi
No it will not give any more bandwidth, seeing you have iChat working i would leave the ports alone
Have you both set the Quicktime settings, goto sys prefs/quicktime/streaming/streaming speed set what you get from your ISP go no higher then 1.5mbps(dont use automatic)
In ichats prefs click on video and change bandwidth limit to NONE.
Restart iChat.
Tony

Client need to be opened for what all objects?

Hi Experts,
I need to list all the objects for which clients need to opened for customizing/master data download, for ex. when we are downloading condition records we need client to be in open/modifiable state, So what I need now is suggestions based on your experience wherever you feel that cleint needs to be opened for this activity .
Thanks for sharing your experience.
With Regards,
Mayank Choudhary

Hi Mayank,
Even I tried for the list of all cross-client download objects in vain. I figured a work around for this and found it helpful.
To check wether a particular object is downloading cross-client data:
1) Determine all the tables involved by executing CRM table SMOFTABLES with the adapter object name. (Ex: DNL_CUST_SHIP downloads data from the following tables: TINC, TINCT, TPRIO, TPRIT, TVSB, TVSBT.)
2) In order to check wether these tables are cross client or not, execute table DD02L in R/3 system with all the tables determined in step 1.
Ex: DNL_CUST_SHIP
Table : DD02L
Table name----
Client-specific
TINC----
X
TINCT----
X
TPRIO----
X
TPRIT----
X
TVSB----
X
TVSBT----
X
This means that none of the tables invloved in DNL_CUST_SHIP download are cross-client and can be downloaded without opening the client.
If there are any client independent tables involved then we need to open client and perform download.
Ex. DNL_CUST_CNDALL
The below mentioned tables are involved in DNL_CUST_CNDALL object download and are cross-client and hence the client needs to be open while downloading the object.
TMC1K
TMC1D
TMC1
T681
T682
T682I
T682T
T682Z
Hope this helps
Regards,
Aj K

Besides CAPWAP, what other ports/protocols needs to be allowed for FlexConnect

Well the title says it for itself.
Besides CAPWAP, what other ports/protocols needs to be allowed for FlexConnect?
To clear things out, I am MOSTLY concerned between the communication of the FlexConnect AP to the WLC. Besides CAPWAP what do i need to consider? I need this list since most our clients have a firewall, and of course, i need to allow certain protocols and/or ports on the firewall so that the AP and the WLC can see each other.
Any one knows?
As far as I know, I would allow:
1. CAPWAP
2. ICMP -For reachability testing
on the firewall, to/fro the devices.
Inputs would be helpful! ^_^
Thanks in Advance.

Thanks Scott,
Verifies what I need or rather request clients on what ports to allow on their firewall, since this is VPN connections, ICMP, telnet, SSH wouldn't hurt to be enabled xD
A. CAPWAP
   PORTS:
    5246/UDP      -Control Channel
    5247/UDP      -Data Channel
B. ICMP(Ping)                        -OPTIONAL/Reachability verification
C. AP Remote Access          -OPTIONAL
    PORTS:
    22/TCP               -SSH
    23/TCP               -Telnet

Does Mail need to be open for emails to appear in Notifications?

I love the notifications feature in Mavericks, and in particular, I like that incoming emails pop up like in iOS. My question is, does Mail app need to be open for emails to appear in Notifications?

On the Mac, Mail needs to be open to be notified of incoming Mail. I tend to leave the app open all the time, just collapsed into the Dock, getting notified by Notification Centre as emails arrive and leaving a red badge on the Mail icon in the Dock if Mail arrived whilst I was away.

HT204210 Still nothing about File Vault that needs a bug fix for almost every user. This is becoming even more disappointing!

Still nothing about File Vault that needs a bug fix for almost every user. This is becoming even more disappointing!

Apple Enterprise Support is aware of this issue. They have specific instructions which attempt to remediate the issue, however, attempting on two different MBP laptops, so far has not succeeded.
The problem to be specific is - hang at login. The Filevaulted user account gets its password entered, then the "progress bar" mid screen will be seen to halt, never resuming. NVRAM resets dont necessarily cure this issue, but turning off FV2 definitely does.
We are seeing this with 10.10.2 fully Apple-SUS updated machines.
Feedback has been sent to Apple over this as well.
Im recommending:
a. turn off FV2 until such time as a Apple provided update cures it
b. consider the Sophos WDE solution if WDE is absolutely required (disclosure: I havent attempted this, not sure about its workability)

Do we need Oracle OLAP Engine for OBIEE

Hi experts
Do we need Oracle Olap Engine for OBIEE..
Thanks in advance
Reagrds
Frnds

Short answer: No.
Long answer: No.

Installing Repository Creation Utility (RCU) for OBIEE 11g

Hello,
We are working on installing the Oracle Business Intelligence Entreprise Edition Plus 11g (v 11.1.1.6.0) for a POC in our Company's network.
We have to install the OBI Server and other server-side components on a IBM AIX (64-Bit) server; and the client tools on the local Desktops.
My queries:
*1. I am downloading the following softwares for this setup. Please help me understand is this the complete list of softwares required, or are there any more softwares required for OBIEE 11g intallation?*
List of softwares to be downloaded:
1) Oracle Business Intelligence, v. 11.1.1.6.0
- for AIX (64-Bit):
Disk 1 (1of2) (1.4G) (cksum 4182440856)
Disk 1 (2of2) (1.5G) (cksum 2020935297)
Disk 2 (1of2) (1.7G) (cksum 796853559)
Disk 2 (2of2) (1.3G) (cksum 685152953)
Disk 3 (1.6G) (cksum 1431984641)
2) Repository Creation Utility (11.1.1.6.0)
for Microsoft Windows (32-bit) (320M) (cksum 2503314275) OR for Linux x86 (32-bit) (391M) (cksum 201758785)
Link for (1) and (2): http://www.oracle.com/technetwork/middleware/bi-enterprise-edition/downloads/bi-downloads-1525270.html
3) Oracle Business Intelligence Developer Client Tools Installer (11.1.1.6.0)
- for Microsoft Windows x86 (32/64-bit): (360M) (cksum 3317017977)
Link for (3): http://www.oracle.com/technetwork/middleware/bi-enterprise-edition/downloads/bus-intelligence-11g-165436.html
NOTE: The JDK 1.5.0 is installed
*2. Where should the additional required software 'Repository Creation Utility' be installed in this case?*
I can see it is available for 32-bit OS (Windows or Linux x86), and that is why I suspect it to be a client-side software - which is to be installed on my local desktop. Hence, Can I download the Repository Creation Utility (11.1.1.6.0) for Microsoft Windows (32-bit) (320M) (cksum 2503314275)
Please clarify.
*4. I will not be installing any of the Oracle BI Applications, so will I require the software Oracle Business Intelligence Data Warehouse Administration Console (10.1.3.4.1)?*
I assume NO.
*5. IMP: Is there a Web server (E.g. Oracle WebLogic Server) included in the OBIEE suite, which gets installed in the default installation settings?*
OR Is there a need to download and install a separate Webserver on the AIX system before installing OBIEE.
Please reply ASAP.
Thanks,
Shweta.

Although it is a POC, but the installation has to be done on a AIX6.1 remote system, which will be used as a server in the enterprise, with 5 to 7 people accessing it. So 'simple install' is not suitable in this case.
The AIX6.1 system has a JDK 6 (64 bit).
I understand that the OBIEE 11g suite comes with a Oracle WebLogic Server (OWLS) installable included in the suite. However, in case of Software Only installation type, the OWLS needs to installed first and then the installer has to be started in 'Softwar Only' mode.
Could anyone please suggest:
*1) does 'Enterprise Install' type suite on the AIX6.1 system? If yes, does it mean that it will install JDK once again? is this recommended, as the host system is a shared server and the existing JDK 6 (64-bit) can be in use by other applications on this system.*
*2) If (1) is not true, is there a way to install the Oracle WebLogic server using the OBIEE 11g installer itself? or do I need to download the WebLogic server installer separately from the OTN site?*
Thanks in advance for any helping pointers on the above.
Please reply ASAP, as this is urgent.
Thanks,
Shweta.

Hardware/system requirements for OBIEE 11g

Does anyone have the hardware and system requirements for OBIEE 11g? I'm trying to procure hardware for an internal environment but want to make sure that the system requirements have not changed significantly from 10g.
Can anyone share this information? It would be greatly appreciated. I know 11g is not out yet but trying to get a headstart on ordering hardware in preparation.

I don't think there will be any major changes in the hardware side of things. Basically anything that was able to run 10g should be able to run 11g. They will probably add support for newer software components which normally happens at each release.

Ports that need to be Opened for OBIEE 11g Installation on Solaris Box

Similar Messages

Maybe you are looking for