Ports to Open for SDM Deployment thru NWDS in VPN
Hi,
We are trying to deploy WD components over VPN. In this scenario what all ports should be open.
Would opening the message server port suffice ? Or is it necessary to open the SDM port too ?
Will deployment happen through Message Server or directly through the SDM port.. ?
Regards
Bharathwaj
Message was edited by: Bharathwaj
Bharathwaj Ragothaman
Hi,
If u r connected to VPN, automatically u r into their network. So it is enough that ur application server is up and running.
In windows>preferences>SAP J2EE Engine. Give the host name and the port.
Just deploy ur application it will be asking for the password. Give the SDM password.
- Nagarajan.
Similar Messages
-
Which port is open for connection ?
how could I know which port is open for connection ?
In the java, I use JDBC to connect to Oracle,
connection = DriverManager.getConnection("jdbc:oracle:thin:@localhost:1521:sid", "scott","tiger");Do we have a command to show open port ?
Thanks.What is your Oracle version, and do you use dedicated connections or "shared servers"? From your port number invoked (1521), I'll guess you use dedicated connections. In that case, the listener (located at 1521) will "spawn" a dedicated process for your session, and tell this process to start on another port (usually falling on a certain range, depending on your OS). An easy way to see this would probably to turn listener tracing on. Here's what I found in the log file after I started a new (dedicated) session on my 10.2 DB:
"22-OCT-2006 21:31:16 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=ora102)(CLIENT_REGISTRATION=ora102)(CID=(PROGRAM=C:\oracle92\bin\sqlplusw.exe)(HOST=DANIELROYLAPTOP)(USER=Daniel))(CLIENT_REGISTRATION=ora102)) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.100)(PORT=3198)) * establish * ora102 * 0"
HTH
Daniel -
Should FTP port be opened for client_to_as function
I need to transfer a file from the client machine to the Solaris Server where the 10g forms are running. I was planning on using the webutil_file_transfer.client_to_as function. I know we have to set some properties in the webutil.cfg file. Other than that, should the FTP port be open on the server for the file to be transferred from the client machine. Basically, wanted to know if FTP protocols are used to transfer the file so that certain securities can be set on the server.
Also does anyone know how to delete the file on the solaris server programmatically through Oracle Forms? After the file is transferred from the client to the server and processed, I need to delete the file. I am assuming you can use the HOST command, but not sure of the exact syntax and what permissions are required to delete the file from the client machine.I have never used the "Client_To_AS" method, however, according to the documentation all you need to configure is the webutil.cfg and insure the transfer.appsrv.enabled parameter is set to TRUE and if the transfer.appsrv.accessControl parameter is set to TRUE then you also need to ensure the target directory on the App Server is listed in the transfer.appsrv.write list. There is no mention that FTP must be enabled on the App Server.
The documentation also states that you should call the WebUtil_File_Transfer.IsASWritable function with the target file name to ensure you are able to write to the file location on the server.
As to how to delete a file, you can use the "rm <filename>" command in Solaris to remove the file. Also, here is the link to the documentation I used to reply to your post.
http://www.oracle.com/technology/products/forms/htdocs/webutil/web_util.pdf
Hope this helps.
Craig... -
Which port need open for Imoprt WS in to the TREE ??
ZfD6.5SP2.
WS----firewall-------NW_SERVER
Which ports ned open on the firewall for import Ws in to the TREE ??
SergSerg,
>Which ports ned open on the firewall for import Ws in to the TREE ??
8039
Jared Jennings
Data Technique, Inc.
Novell Support Forums Sysop
http://wiki.novell.com -
Trying to figure out why ports are open for systemd processes
Output of my "netstat -nlp"
[root@server ~]# netstat -nlp
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 2159/sshd
tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN 2060/mysqld
tcp 0 0 0.0.0.0:5355 0.0.0.0:* LISTEN 2168/systemd-resolv
tcp6 0 0 :::80 :::* LISTEN 4460/nginx: master
tcp6 0 0 :::22 :::* LISTEN 2159/sshd
tcp6 0 0 :::443 :::* LISTEN 4460/nginx: master
tcp6 0 0 :::5355 :::* LISTEN 2168/systemd-resolv
udp 0 0 IP4:68 0.0.0.0:* 2078/systemd-networ
udp 0 0 IP4:68 0.0.0.0:* 2078/systemd-networ
udp 0 0 IP4:68 0.0.0.0:* 2078/systemd-networ
udp 0 0 IP4:68 0.0.0.0:* 2078/systemd-networ
udp 0 0 IP4:68 0.0.0.0:* 2078/systemd-networ
udp 0 0 IP4:68 0.0.0.0:* 2078/systemd-networ
udp 0 0 IP4:68 0.0.0.0:* 2078/systemd-networ
udp 0 0 IP4:68 0.0.0.0:* 2078/systemd-networ
udp 0 0 IP4:68 0.0.0.0:* 2078/systemd-networ
udp 0 0 IP4:68 0.0.0.0:* 2078/systemd-networ
udp 0 0 IP4:68 0.0.0.0:* 2078/systemd-networ
udp 0 0 IP4:68 0.0.0.0:* 2078/systemd-networ
udp 0 0 127.0.0.1:123 0.0.0.0:* 4491/ntpd
udp 0 0 0.0.0.0:5355 0.0.0.0:* 2168/systemd-resolv
udp6 0 0 ::1:123 :::* 4491/ntpd
udp6 0 0 :::5355 :::* 2168/systemd-resolv
raw6 0 0 :::58 :::* 7 2078/systemd-networ
Why are ports 5355, 58, and 68 being listened to/open ?
Please let me know if any additional information is needed, it is the latest version or arch linux and fully updated as of this post.68 is for BOOTP/DHCP. Why it needs so many open is beyond me - dhcpcd just has the one global 68 open for any amount of interfaces.
The other two ports don't look like anything network setup related should have open.
I would file a ticket with systemd upstream. -
Need step by step to get port 48705 open for Panasonic Bluray
Classic handoff syndrome. Brand new Panasonic Bluray connected to internet out of the box with Airport Extreme, streamed fast. Imac running Snow Leopard.
Updated Panasonic firmware and no connections. Panasonic tech tried for a half hour and concluded that I needed my ISP to open port 80, 443 and 48075. I think that 80 and 443 are open by default. Resetting the settings and the player did nothing....gateway: fail. There is no way to undo the firmware update.
Call India and Verizon says that they cannot assist me with AEBSn just Verizon routers. All searches for this problem give directions with too many blanks that I don't have the info to fill in. Below is an example of an attempt in the community to help. I wouldn't know where to find the <missing info> . I couldn't find the port mapping tab in this version....help would be appreciated.
Tesserax
Re: how can you perform a Port Forwarding Procedure on Ports 48705, 443 and 80 so my Blu Ray player will be able get and IP address and connected to your gateway.
Oct 1, 2011 11:22 PM (in response to doc9850)
Again, you would only need to configure for port mapping if you intend on accessing the Blu-ray player from a remote location.
Port mapping takes two basic steps:
Either assign a static Private IP address or use the AirPort's ability to allow DHCP to assign a reserved IP address to the Blu-Ray player, and
Configure the AirPort, using the AirPort Utility, for the proper ports to map.
The following are the basics for setting up one of the newer 802.11n AirPorts for port mapping/forwarding: AEBSn - Port Mapping SetupTo setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings: 1. Reserve a DHCP-provided IP address for the host device.AirPort Utility > Select the AEBSn > Manual Setup > Internet > DHCP tab
On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
Description: <enter the desired description of the host device>
Reserve address by: MAC Address
Click Continue.
MAC Address: <enter the MAC hardware address of the Blu-ray player>
IPv4 Address: <enter the desired IP address>
Click Done.
2. Setup Port Mapping on the AEBSn.AirPort Utility > Select the AEBSn > Manual Setup >Advanced > Port Mapping tab
Click the "+" (Add) button
Service: <choose the appropriate service from the Service pop-up menu>
Public UDP Port(s): <enter the appropriate UDP port values>
Public TCP Port(s): <enter the appropriate TCP port values>
Private IP Address: <enter the IP address of the Blu-ray player>
Private UDP Port(s): <enter the same as Public UDP Ports or your choice>
Private TCP Port(s): <enter the same as Public TCP Ports or your choice>
Click "Continue"
AirPort Utility Port Forwarding for AE is not an intuitive app. It is version 5.6.1 which is up to date for SL.
http://www.google.com/search?client=safari&rls=en&q=48705+port&ie=UTF-8&oe=UTF-8 shows that other people are needing to do this with various routers.
The player is Panasonic DMP-BDT500 Integrated Wi-Fi 3D Blu-ray DVD Player
FYI, the player plays disks beautifully.
Thanks for any help.
DavidMy problem seems to be that my AirPort Utility does not have Port Mapping under the Advanced Tab.
This tells us that you have another router "upstream" on your network, which you may call your modem, but it is in fact a modem/router or gateway type of device.
The AirPort Extreme is configured correctly in Bridge Mode to work with this type of device on your network.
You can verify this by clicking the Internet icon, then clicking the Internet Connection tab. You will see that the setting for Connection Sharing is set to ""Off (Bridge Mode)". That means that the AirPort is not providing the routing services for your network.
Your modem/router or gateway is the device that will need to be configured for port forwarding / mapping.....not the AirPort Extreme.
I am sure that Tesserax will have similar comments. -
Which ports need open for:...
Ws(xp_prof)+BM39VPNclient-----NAT1---INTERNET---NAT2----BM39---PRIVETLAN
USer work with Ws - Xp_prof_SP2. On this Xp installe BM39 VPN Client.
Between WS and INETRNET - NAT1 (iptables).
On the other side:
INTERNET--->NAT2---->BM39SERVER---->PRIVETLAN
I ask:
Whic ports and protocols (and in whic directions) need open in the NAT1
for Allow VPN connection between WS and BM39 in this configuration.
SergOn Sat, 09 Feb 2008 12:55:40 +0000, mysterious wrote:
> serg wrote:
>> Ws(xp_prof)+BM39VPNclient-----NAT1---INTERNET---NAT2----BM39---PRIVETLAN
>>
>> USer work with Ws - Xp_prof_SP2. On this Xp installe BM39 VPN Client.
>>
>> Between WS and INETRNET - NAT1 (iptables).
>>
>> On the other side:
>> INTERNET--->NAT2---->BM39SERVER---->PRIVETLAN
>>
>> I ask:
>> Whic ports and protocols (and in whic directions) need open in the NAT1
>> for Allow VPN connection between WS and BM39 in this configuration.
>>
>> Serg
>>
>>
> tid10088980
Thank you.
Serg -
Ports to open for Jabber to work
Hi,
I want to know which ports I should allow on ACL which will allow Jabber on iOS and Android devices to work successfully.
Thanks,
KashishHey Kashish,
As far as I know, Cisco Jabber for Android and iPhone share the same port utilization:Port and Protocol List
Regards,
Jas -
What ports to open for iChat for video
I can't video chat when I'm connected to my D-link WBR-2130 Wireless G router. I know that the problems lies within the router because if I connect my computer from ethernet to my modem it works fine.
I believe the problem is just that I need to open up some ports. I had a list that someone gave me but I can't find it right now. So can I get a ports listing to open up and have the router work?
Is there anything else I could be missing so I don't need to come back and say it didn't work?Try turning the SPI or DOS firewall setting on the WAN page Off as well.
It is a Check to Disable this item.
Save Settings.
In my DG834G I only made sure it did UPnP (Default) and changed the DOS (on Mine) to Off and allowed the Responding to Internet Pings.
My Allow and Block settings were the same as yours.
I did have Bonjour problems with one computer on Leopard and the other on Tiger that I was not able to resolve until both were on Leopard.
10:01 PM Friday; April 18, 2008 -
Which ports to open for registering an iPod Touch OTA via proxy / firewall ?
I need to set up some iPod Touch over the air via a wifi network controlled with a firewall. I get a message "unable to connect registration server". I suppose I have to open ports, but which ones ??
Try here:
http://support.apple.com/kb/ts3297
http://support.apple.com/kb/TS3125 -
How do you configure the set of port to use for FTP passive data connection
I was able to start the ftp server xml db and connect to it locally. When I tried to connect to it from home, I was able to log in but when i do a "get" command the sessions hangs. I also tried passive mode and do a "get" command and it gives me a connection refused error. I am using the default port 2100. I think this might be a firewall issue with the data connection port. I am not sure which range of ports to open for the passive ftp connection on the server side or where to go and set them for for the ftp server to use? Or this issue might not be firewall related??? Any thoughts. Thanks.
This is a typical problem with VPN/Firewall software and FTP on ports other than 21.
When you open the FTP data connection the FTP Server identifies which port the data will be sent on using the PORT command which is sent on the command port (typically 21 with a normal FTP server, 2100 by default with XDB). THe client then opens that PORT to accept the data (file, output of an ls etc).
As I understand it most VPN/Firewall are configured to monitor 21 for 'PORT' requests. They then understand to allow connection on the PORT number passed on the command PORT. Hence with Port 21 firewall / VPN software is not a problem. However since the XDB command PORT is something other than 21 they do not see / honour the PORT commands from the server and hence the client cannot open the data connection on the specified PORT
As to how to solve it, I wish I knew (After 5 years I still can't use XDB FTP from home to a machine in the office once the VPN tunnel is open :( ). I'm sure it's going to be firewall / VPN software specific and may need the VPN servers to be configured.
The best bet would be to run the FTP server on 21...
Add the following line to your listener.ora file
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = hostname) (PORT = 21))
(PROTOCOL_STACK = (PRESENTATION = FTP) (SESSION = RAW)))
and then restart the listener as root
Start the listener as root.
At the operating system prompt, enter tnslsnr with optional command line arguments. The usage is as follows:
tnslsnr [listener_name] [-user user] [-group group]
where:
Table 4-3 tnslsnr Utility Options
Option Description
listener_name
Specify the name of the listener. If omitted, the default name LISTENER will be used.
-user user
Specify the user whose privileges the listener will use when super user (root) privileges are not needed. After performing the privileged operations, the listener will give up root privileges irreversibly.
-group group
Specify the group whose privileges the listener will use when super user (root) group privileges are not needed. After performing the privileged operations, the listener will give up root group privileges irreversibly.
The listener will temporarily switch to the provided user and group immediately after startup. All subsequent operations will be done with the specified user and group privileges, except the system calls necessary to listen on configured endpoints. The listener will revert to super user (root) for a short period of time to listen on reserved addresses, such as TCP ports less than 1024. After the listener starts listening on all of its endpoints configured in listener.ora, it will switch to the specified user and group irreversibly. Therefore, the listener will give up the root privilege that it initially had. In the current release, -user and -group command line arguments only accept user and group identifiers specified in numeric form.
For example, to execute a root listener called mylsnr and have it use privileges of a user identified -
Asking for SDM password when deploy locally
Hi,
when i am trying to deploy it asking for the SDM password. I have installed NWD workplace in my pc locally. still i am unable to deploy and run the program.
please help me, and suggest me steps to get rid of this problem.
Cheers,
karthikEven if your project is not on DTR, ie. local developement you require J2EE sever to deploy your applicaltion.
Go to windows>preferences>SAp J2ee wngine-->set the sever and port.
If its your local WAs set localhost and port 3601.
when you will delpoly the Application, it will ask you for SDM password. -
Hello,
I want to deploy a sda file thru SDM into SAP J2EE engine. The following error is thrown
Nov 21, 2005 11:41:18... Info: Starting: Initial deployment: Selected development component 'UserAuditLoginLibrary'/'sap.com'/'localhost'/'2005.11.17.18.26.00' will be deployed.
Nov 21, 2005 11:41:18... Info: SDA to be deployed: C:\usr\sap\J2E\JC00\SDM\root\origin\sap.com\UserAuditLoginLibrary\localhost\2005.11.17.18.26.00\UserAuditLoginLibrary.sda
Nov 21, 2005 11:41:18... Info: Software type of SDA: library
Nov 21, 2005 11:41:19... Info: ***** Begin of SAP J2EE Engine Deployment (Library component of SAP J2EE Engine) *****
Nov 21, 2005 11:41:20... Info: ***** End of SAP J2EE Engine Deployment (Library component of SAP J2EE Engine) *****
Nov 21, 2005 11:41:20... Error: Aborted: development component 'UserAuditLoginLibrary'/'sap.com'/'localhost'/'2005.11.17.18.26.00':
Caught exception while checking the login credentials for SAP J2EE Engine. Check whether the SAP J2EE Engine is up and running.
com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [gdns33284] with user name: [Administrator]
Check your login information.
Exception is:
com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: User not authorized.]
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineCompOnlineDeployerImpl.checkLoginCredentials.DMEXC)
Nov 21, 2005 11:41:22... Info: J2EE Engine is in same state (online/offline) as it has been before this deployment process.
But the password which i give for SDM is correct. Kindly help
Thanks,
RukmaniHello Rukmani,
Are you sure that the Administrator's password in the database is the same as the one written in the secure store? It seems to be the problem described in note 701654.
I would suggest you to connect to the J2EE Engine with visual admin or telnet and then reenter the password in the secure store (follow note 701654).
I hope it will help.
Best Regards
Vyara -
Which ports and ACL ( servers) need to be opened for Jabber Video
Hi All,
We are Cisco partners ( ODC at Aricent New Delhi India) working for multiple Cisco projects.
We want to use Jabber Video for communication but as partners ACL ( Server/ports ) need to be opened to access the Jabber video servers.
Can somebody list me all the Jabber Server/Ports to which Jabber client need access to.
Can somebody please respond asap as we have opened an EXAM case for opening the ACL and need the list asap.
Thanks
SaurabhThanks Hoan for the quick reply it answers part of my question.
I also want to know for succeessful video calls which all servers i need access to for eg first it tries on
https://sjc1-movi-pr-bootproxy-vip.ciscojabbervideo.com/endpoint/configuration
then it goes to another server's for logging in etc.
I want to know the list of all servers so that ACL's can be opened for them.
Thanks
SAurabh -
Which ports need to be open for messages and facetime to work properly?
I noticed that Messages no longer works since upgrading to Yosemite on my work network. But it did when i was in Mavericks. Did they change something in Messages in the upgrade that would cause it to no longer work? ports?
I'm behind my work firewall, which ports need to be open for messages to work properly?Just make sure your 9001 port is open.
Hope this works..
Hamid
Maybe you are looking for
-
I need to transfer the music off of my ipod onto my mac but i cannot do that when my macbook will not recognize my ipod touch in the finder.
-
.avi files acting weird inside of premiere
So I have some lovely videos that I have edited that require some screen capturing. The .avi motion JPEG files we used from the Black Magic Design Intensity capture PCI Cards looks GREAT........until I drop it into premiere and it looks like some jan
-
Unable to link layers in Photoshop CS
I have Photoshop CS. In the box showing the layers I've made, there is no longer a small checking box to the left of each enabling me to link a layer with others. If I hold the cursor over the looped "link" symbol at the bottom, an "unavailable" symb
-
Printing the pick list from the delivery automatically
Hi All, Please let me know how to do the : Printing the pick list from the delivery automatically ? Thanks in advance. Regards, Nagaraju.
-
Lightroom 5 catalog. Retrieving user presets and plug-ins.
Got a new Macbook Pro, and all my data from my old Macbook is on my new hard-drive. I transferred my old Lightroom 5 catalog on my new Macbook and when I tried to open it, none of my User Presets nor Plug-ins such as; VSCO were there. How can I get t