Ports to open to enable connection between TVN staged env and SAP

Hi,
What the ports to be opened to enable connection between SAP TVN stage environment and SAP ECC...

Hi Abi,
I have implemented STVN products in 10 or 11 clients and have never had to do this. The SAP .NET connector (or SAP JCo for Java version) handles the connection between the STVN apps and the SAP system and no port is usually opened. The default port for the application, if you have not changed the IIS website, will be port 80.
I hope that helps.
Kind regards,
Luke

Similar Messages

Connectivity between SQL Serevr 2008 and SAP BW using Microsoft Connector 1.0

Hi ALL
         I am trying to connect to SSIS 2008 to SAP BW using Microsoft Connector 1.0.
Following are stepes I performed.
1. Created RFC on SAP BW Server.
2. Created Prcess Chain in SAP BW.
3. Created SSIS Package using SAP BI Source. Here I set Execution Mode : P Trigger   Process Chain.
The process chain is executing fine on SAP BW Server, But it is unable to send back a
notification to SSIS package. And here my SSIS package failed.
I am getting following error message :
[SAP BI Source] Information: Process Start Process, variant Start Variant for MSBI has status Completed (instance D8Z84GJ2RLV7WCI2IYK5CZ1R3)
[SAP BI Source] Error: An internal exception occurred.
Microsoft.SqlServer.Dts.SapBw.Connectivity.ERPException:
An error occurred during the dispatch of the incoming function. The last return code was "RFC_FAILURE".
Before this error I am getting following messages are :
[SAP BI Source] Information: Process Data Transfer Process, variant Z09_O101 -> Z09_H101 has status Active (instance DTPR_D8Z84GJ2RLVZKYTTUHZRFEG0V)
[SAP BI Source] Information: The component is waiting for a notification.
Is there any way to test the both the way connections? I mean SAP BW -- SSIS &                SSIS --- SAPBW.
Can any one please explain me entire connectivity architecture between SSIS and SAP BW using Microsoft Connector 1.0. (I mean how these RFC are working and how SSIS is pulling the data from SAP BW)

I am having the same problem. We actually loaded data a few times but now it does not work. It is amazing that we cannot find help for this problem. Has anyone been successful using the BI connector 1.1 to load data to a BI system using SSIS. I think
this had to do with either a DLL problem on the machine running SSIS or the Service Pack level of the BI system. I cannot find any documentation showing versions. I have looked through the documentation that was written back in 2008 but can't seem to
get it to work.
Sorry we are trying to push data (BW Destination) to BI it looks like you are trying to get data from BI.

Problem to connect between Oracle 10g xe and VB2010 at Vista sp2

Introduction
Hi guys, good day... NEED RESCUE!! SOS!! Hmm.. i have trouble been 1 weeks trying connect between Oracle 10g xe and VB2010 on window vista sp2. Actaully im very new at Oracle 10g xe and VB2010 but i got a project is going to build up system database and i figure out Oracle 10g xe and VB2010 can use free so i just chows these appication to be my project. I been search around internet and there is several things i was found about the connection but i has try and tried still it wont work out.
Things i found and learned
Oracle
1. I have download Oracle 10g XE and installed in my windows vista sp2.
2. I notice the Oracle Developer Tools is needed for VB2010 (To add reference 'Oracle.DataAccess'). So i was downloaded ODT11beta and installed
3. I also edit TNSNAMES to following below:
OraDb =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = shin-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
4. My sqlnet like following below:
SQLNET.AUTHENTICATION_SERVICES = (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
5.I have try tnsping OraDB and its works.
6. I monitoring task manager and OracleServicesXE is running.
7. ora_dba is added in Group.
Problem in SQLPLUS
When i try connect SQLPLUS in cmd i get ERROR: ORA-12560: TNS:protocol adapter error.
i . In cmd i type sqlplus and enter then i been ask for username and password.
ii. After i insert my username and password and enter then i get the error of ORA-12560.
Visual Basic 2010
1. First i created my project, drawing label and button for test connection.
2. Then, i add reference Oracle.DataAccess into my project.
3. I type following script into my vb form:
Imports System.Data
Imports Oracle.DataAccess.Client
Imports Oracle.DataAccess.Types
Public Class Logon
Private Sub cmdLogon_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdLogon.Click
Dim oradb As String = "Data Source = OraDb; User Id = system; Password = shin;"
Dim conn As New OracleConnection(oradb)
conn.Open()
Dim cmd As New OracleCommand
cmd.Connection = conn
cmd.CommandText = "select SName from Staff where SName = shin"
cmd.CommandType = CommandType.Text
Dim dr As OracleDataReader = cmd.ExecuteReader()
dr.Read()
lblOra.Text = dr.Item("SName")
conn.Dispose()
End Sub
End Class
Problem in VB2010
When i run my project and press the button i get error message ORA-12514: TNS:could not resolve the connect identifier specified at conn.Open()
Extra Question*
1. Im notice in my netbook xp home sp2, before i install ODT11beta my sqlplus look fine thought cmd but after i installed ODT11beta its same problem with my Vista sp2 now. Get error ORA-12560: TNS:protocol adapter error :( I tried uninstall ODT11beta again and restart its work fine again. Which i really dun understand. Izzit the version ODT11 is not suitable for 10g xe? And i dunno this problem is related with my connection between oracle 10g xe and vb2010 or not. So confuse@@
2. I wish to know more about connect between Oracle and VB, is there still a things i miss?(I mean steps or configuration that should i done)
3. Or i just lower my VB version could make more easy? If yes, what version VB should i use that could work out with oracle 10g xe?
4. Sorry for too bad my english but i really wish somebody could help me. Please try to understand my written or you could ask me mean if dont understand. Im stuck!! Stuck feel not really that good.....
Edited by: user9173084 on Jul 19, 2010 3:34 AM

Huhu..
Yo, henry
I thought the OraDb is just a name for entry but im not sure it is a service. I was refer http://www.oracle.com/technology/pub/articles/cook-vs08.html at topic Connection Strings and Objects.
Here is my lsnrctl service
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOW has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOW has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "XEXDB" has 1 instance(s).
Instance "xe", status READY has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 state:ready
DISPATCHER <machine: SHIN-PC, pid: 1932>
(ADDRESS=(PROTOCOL=tcp)(HOST=shin-pc)(PORT=49158))
Service "XE_XPT" has 1 instance(s).
Instance "xe", status READY has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
Service "xe" has 1 instance(s).
Instance "xe", status READY has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
The command completed successfully
Izzit ok? I notice there is no listed OraDb. but tnsping OraDb seem fine.
Actually there is somethings as a newbie i wondering long time alreadly ><
1. The origin of tnsname.ora is no OraDb or ORCL but i just simple add it by open tnsname.ora with notepad. Im just not sure it is function or not.
Also please check at my TNSNAME.ORA:
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = shin-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
OraDb =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = shin-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
I got the feeling there is so close~~~!!!

Trying to Hot Sync Visor Pro with Windows 7 (64 bit OS) - getting error: "The connection between your handheld computer and the destktop could not be established. Please check your setup and try again."

Hi.
I read the posting regarding the options on Hotsyncing for Windows 7; however, I have some questions as I have a 64-bit system.
I have a Visor Pro that I'm trying to Sync up with my new laptop which is running Windows 7.
Steps I have taken:
* installed the Visor Palm Desktop 3.0.1 that came with the Visor (which the installation went well)
* The issue arises when I push the "Sync" button on the cradle and the following error message appears "The connection between your handheld computer and the destktop could not be established. Please check your setup and try again."
Since I have a 64-bit OS it appears that I have 2 options: 1) bluetooth or 2) Infrared.
I have to admit I don't know know how to do either of these (how can I tell if this Handspring Visor Pro has bluetooth (which I don't it does)?).
Then how about the Infrared option? I see on the PDA it has a red area that one can "beam" info. Is this the same as Infrared or my 2nd option?
I love my Visor and want to continue using it, but need to backup the valuable info!
Any help with this would be greatly appreciated!
THANKS!!!!!
Post relates to: Visor Pro

Hello lwalbring and welcome to the Palm forums.
Your Visor, as you suspect, does not have Bluetooth, so you must use the IR HotSync option. Since you are using Windows 7 64-bit, I believe that you are going to have to upgrade to Palm Desktop 6.2.2 to make things work from an OS/Driver perspective.
Since you are using such an old device, you are also going to have to download and install the PalmHotSyncSetup Utility from Pimlico. This update turns on support for old Palm OS PDAs in Palm Desktop 6.2.2. Without the update, you won't be able to sync your Visor with Palm Desktop 6.2.2. The software is free and the link is all the way at the bottom of the screen.
Lastly, if your PC doesn't have an IR port on it, you will need to purchase a USB to IR adapter. Some laptops still have IR ports and most desktops don't.
Once you have all the pieces, you'll want to go back to the Windows 7 and Vista HotSync thread again, and follow the directions for setting up and configuring IR HotSyncs.
Alan G

Connection between BO Mobile Server and BOE

Hi All,
I have installed BO Mobile on the same machine which as Business Objects Enterprise.
Have the following questions
1. How the mobile server connect to the enterprise server? Let me know what are the steps needs to be done for the connection between the mobile server and enterprise.
2. How the connection between mobile server and proxy server
I gone through the installation and deployment guide of businessobjects mobile but it not clearer to me.
Kindly, help me out.
Thanks and Regards,
Yuvaraj.

Hello,
I have a similar scenario to that you have described, in order to test;
BOE and BO Mobi deployed on the same machine, no proxy. I am also using a BB simulator in order to test connecting.
I have installed the client s/w to the simulator device, but am unable to connect to BOE from the device.
Below is the info from each of the config files and device.
Can you tell me if there is a needed change?
1. VMS
$Id: server.config 28982 2008-01-03 21:52:21Z hmak $
config for VMS Server instance
VERSION = 6.0
[server]
SERVER_ID=VMS_SERVER
[comm]
BINDTO_PORT=11711
MANAGEMENT_PORT=11712
EXTERNAL_HOSTNAME=<BOE machine Name>
common across all VMS servers
INCLUDE_CONFIG_FILE = config/cluster.config
vim:noet
2. VAS:
$Id: server.config 27498 2007-10-01 19:12:19Z hmak $
config for Authentication Server (VAS) instance
VERSION = 6.0
[server]
SERVER_ID=AUTH_SERVER
[comm]
BINDTO_PORT = 11011
MANAGEMENT_PORT = 11012
EXTERNAL_HOSTNAME=<BOE machine Name>
common across all auth servers
INCLUDE_CONFIG_FILE = config/cluster.config
vim:noet
3. Handheld Connection Settings:
Mobile Server: <server IP Address>
Port Number: 11011
CMS Name: <BOE machine Name>
Auth Method: Enterprise

Connection between CRM back end and ASP front end website for Ecommerce

Hi All,
I want to establish the connection between a ASP website and CRM back end server(we are replacing th existing ERP back end system with SAP CRM ).
I want to know whether I have to go with XI or any other connectors provided by SAP to establsih the communication between the existing ASP website and CRM back end server..
Can anyone please help me out.
Thank you,

Okay here is the general concept for your scenario:
-You will call standard/custom RFC's(could be BAPI's) in the CRM system from the existing application.
-You will need to write a new model layer in your ASP application that calls the RFC layer in CRM
-You decide what data you want to use from CRM in your application
Let's assume at minimum you will want to use the product master, business partner master, and business transactions. You will need RFC's/BAPI's for every interaction point where you will consume/publish data to CRM.
So when an user creates an order from your e-commerce site, you will need to support saving an order in CRM. This is example of how you need to map out each function in your existing site to a part of the CRM system. Since we don't know what your site currently does, this is something you would have to do.
Once you have mapped out the business level data to the CRM system, then you can evaluate where you will need a BAPI and/or RFC call. Once that is done, then you can look at the CRM system and see what standard pieces can be called. Then everything else is custom development. Your ASP application will call CRM via RFC.
It is possible to do what you want to do, but it is going to require a lot mapping work and a fair amount of development effort to integrate the two pieces. I don't know if you might be better off looking at the SAP Internet Sales Solution instead so you could focus only customizing that application, instead of worrying about an integration problem. It just depends on how much special functionality your existing e-commerce site has today.
My general recommendation would be for you to hire a consultant that has done an SAP e-commerce project using SAP CRM in the past and let them guide you on the implementation issues. An on-site resource could better answer your "high-level" questions.
However if you have more questions please ask and I will try to answer to the best of my knowledge.
Good luck,
Stephen

Regarding connection between front end HTML and back end SQL 7.0

Hi!!
I am working on the project 'ERM'. I have designed 12 forms using HTML. Can u please give me brief idea how to establish the connection between a back end and front end i.e. between HTML and SQL 7.0. If possible can u provide me the source code for the same.
I will be very thankful to you.
Thanks,
Jigar.

Read up about multi-tier applications.
You need servlet and JSPs for the server-side presentation layer, some classes for the business logic, and some mor for the persistence layer either using JDBC or some framework like Hibernate.

I have forgotten my Password to be able to connect between my desktop Mac and Mac Book on my home network. How can I recover the password or change it?

I have forgotten my Password to be able to connect between my desktop Mac and Mac Book on my home network. How can I recover the password or change it?

The password used to log in to a user account remotely is the same as you would use to log into it locally. You can also use your Apple ID, so try that.
To change your login password read OS X Mavericks: Reset a login password
also OS X Mavericks: If you forget your login password

How to make the connection between a sale order and an invoice in SDK

Hi,
Im trying to make the connection between a sales order and an invoice using the SDK.
Here is how i create each of them:
Invoice:
public int SalesInvoiceInternalSave(string buisnesspartnerCardCode, DateTime dueDate, double discountPercent, string id, IList<InternalItem> items, ref int invoiceId)
      int res = 0;
      SAPbobsCOM.Documents invoice_entry = (SAPbobsCOM.Documents)Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInvoices);
      invoice_entry.CardCode = buisnesspartnerCardCode;
      invoice_entry.DocDueDate = dueDate;
      invoice_entry.DiscountPercent = discountPercent;
      invoice_entry.Reference2 = id;
      foreach (InternalItem item in items)
        invoice_entry.Lines.WarehouseCode = item.Shopid;
        invoice_entry.Lines.ItemCode = item.Code;
        invoice_entry.Lines.ItemDescription = item.Name;
        invoice_entry.Lines.Quantity = item.Quantity;
        invoice_entry.Lines.UnitPrice = item.Price;
        invoice_entry.Lines.Add();
      res = invoice_entry.Add();
      return res;
Sales order:
    public Boolean SalesOrderInternalSave(string orderId, string buisnesspartnerCardCode, DateTime dueDate, IList<InternalItem> items)
      SAPbobsCOM.Documents order_entry = (SAPbobsCOM.Documents)Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oOrders);
      order_entry.CardCode = buisnesspartnerCardCode;
      order_entry.DocDueDate = dueDate;
      foreach (InternalItem item in items)
        order_entry.Lines.WarehouseCode = item.Shopid;
        order_entry.Lines.ItemCode = item.Code;
        order_entry.Lines.ItemDescription = item.Name;
        order_entry.Lines.Quantity = item.Quantity;
        order_entry.Lines.UnitPrice = item.Price;
        order_entry.Lines.Add();
      int res = order_entry.Add();
      return res == 0;
What do i need to change to get the connection between the two of them?
And how do you insert a amount (not percent) discount into an invoice?
Regards,
Torben

Hi,
Add the sale order, then add the invoice. and while adding the invoice please add the following details to the invoce documen
invoice_entry.Lines.BaseEntry = 'Doc entry of the newly created SO
invoice_entry.Lines.BaseLine = 'Line No of the SO
invoice_entry.Lines.BaseType = 17 'For sales order document type.
Hope it helps,
Vasu Natari.

Help Needed in establishing connection between Kepware OPC server and UDS 4

Hi All,
I am in the process of establishing connection between Kepware OPC server and UDS 4.0,
Can anyone guide me through the process of configuring UDS 4.0 to establish conection with the Kepware.
Any standard documentation on UDS 4.0 will be of great help.
Thanks in advance,
Shyam

HI Rajesh,
I am creating OPC DA instance and when i try to browse for the OPC servers available in the machine, the list is blank. i am not able to view any OPC servers.
Actuallt the Kepware OPC server and UDS are installed in the same machine.
Can you plz through some ligh on this
Regards,
SHyam

HT1551 after finish installing an update, the the status light keeps blinking and a picture of the connection between the micro USB and iTunes shows up - what is this about?

after finish installing an update, the the status light keeps blinking and a picture of the connection between the micro USB and iTunes shows up - what is this about?

The update failed - using a USB to microUSB lead (that Apple annoyingly don't include!), try to restore the AppleTV software to current version software using instructions here:
http://support.apple.com/kb/HT4367
Pay attention to differences in power connection depending on whether or not you have AppleTV2 or AppleTV 3.

I lost the connection between my MacBook Air and Bluetooth wireless speakers (Logitech) when updating to OS 10.7.4. Tried all the "fixes" I could find, no results!

I lost the connection between my MacBook Air and Bluetooth wireless speakers (Logitech) when updating to OS 10.7.4. Tried all the "fixes" I could find, no results! Can you help?

Error message as above and below:
'Send Message Error
The message could not be sent because connecting to SMTP server mail.btinternet.com failed.
The server may be unavailable or is refusing SMTP connections.' (etc.)
BT won't deal with this - they redirect me to a 'partner' who want to charge to discuss the problem. Nice, eh!

Connection between portal (KM system) and external server.

Hello All,
I need to establish connection between portal (KM system) and external server. At external server, IIS and WebDAV are configured.
So for this reason, I have created an HTTP system and a webDAV repository manager at portal, but not able to connect to the external system.
I have created a webDAV template, but not able see it under KM systems to create a webDAV system, I have even restarted the portal, still no use
Please suggest, any prerequisites need to be done?
Thanks
sk

Hello Supraja.
Yes, ofcourse i already followed the doc.... In the 20th page of the doc, it is said the portal needs to be started, for the WebDAV template to be seen. to go head and creat a WebDAV system under KM systems.
But even after restarting the portal, I cant find the already created WebDAV template. Any guess to reslove it...
A quick response it appreciated.
regards-
sk

*what is the difference between web flow engine and sap business workflow?*

Hi,
Can any please guide me by telling what is the difference between web flow engine and sap business workflow?

>
Arghadip Kar wrote:
> Check this link
>
> http://www.workflowing.com/id35.htm#1__what_is_the_difference_between
... which is exactly where the FAQ item came from!

Difference between ECC 5.0 and SAP 4.7

Hi,
Can anyone please explain the difference between ECC 5.0 and SAP 4.7 from ABAP point of view? What is the full form of ECC?
Best wishes,
Atanu

Hi,
Check these
Technical difference between 4.7 and ECC 5.0
difference between sapr/3 4.7 and sapr/3 ecc 5.0
Differences b/n 4.6c,4.7 and ECC 5.0
Regards
vijay

Ports to open to enable connection between TVN staged env and SAP

Similar Messages

Maybe you are looking for