Ports won't open after forwarding

I'm trying to set up my AEBS so I can access my network remotely. However, even after forwarding the ports, none of them are showing as open. So far, I've
Mapped the ports (3389 for Windows RDP, 21 for FTP)
Reverted my Firmware from 7.6.3 to 7.6.1
Allowed incoming IPv6 connections
Set IPv6 to Tunnel
Enabled NAT port mapping
I have an Airport Express set to extend the current wireless network, though I can't see how that would impact it. Not even Port 80 will open. I've also got both my MacBook and my PC's firewalls configured to allow the traffic, though since the ports aren't open I can't imagine the problem being associated with that.
Does anyone have any suggestions?

Would like to bump this thread - intalled a foscam wireless PTZ camera on my network with no issue - static ip obviously. I made all the changes to my airport extreme (tried the new airport extreme AC and my older N model) and it won't work on either. Various webtools show that the port i'm trying to open (80) is still closed.
Airport extreme is on 7.6.4

Similar Messages

ITunes won't open after OS update to Yosmite

ITunes won't open after OS update, ITunes has been updated, it won't open or bounce. It will not allow me to move it to trash or reinstall it. I have already updated to OS X Yosmite two times as directed by apple, I have rebooted in safe made as well as Command/Option/P/R before start up. I have opened console/system log to see if there is anything going on but when I click on Itunes nothing happens, not even so much as half a line of script. I'm stumped. If I wanted someone to tell me to turn it off and on again I'd just watch IT Crowd. please help

Thank you for using the Apple Support Communities
If you head into your applications folder and locate iTunes. Right click iTunes and show package contents. In there there will be a contents folder --> MacOS --> double click on the iTunes terminal icon. This should force iTunes to open via a terminal window and at the very least it will tell you what it is getting stuck on.

ITunes won't open after downloading 7.0

My iTunes won't open after downloading 7.0, what should I do?

replying to Robert
I get a Windows error code of 0x666D743F
First see:
iTunes 7 for Windows: iTunes fails to launch with an unknown error
There are some other possibilities
That error has been known to be produced by having Total Recorder or the Volume Logic plug-in installed on the PC.
For a workaround for Total Recorder, see:
chuckieb: One fix for iTunes 7 "0x666D743F" error
To check on the Volume Logic issue, see:
Troubleshooting issues with 3rd-party iTunes add-ons
For further possibilities, see other posts in chuckieb’s thread.

ITunes won't open after update; MacBook Pro, Mac OSX 10.6.8, iTunes version 11.1.5

iTunes won't open after update - help, please; MacBook Pro, Mac OSX 10.6.8, iTunes version 11.1.5.

i had a problem similar to yours and better yet, i have the fix for it. i downloaded maverick 4 months ago and was without itunes ever since. all itunes icon did was bounce. itunes would never open and whats more, is when i would try to update it, i would get a "thank you for downloading itunes!" page , but the download would never work. so i scoured the net for solves. nothing that worked. <4 months later> then last night i took a new approach. i decided even though maverick would not allow me to uninstall itunes, i would find a way to uninstall itunes. then i would reinstall back to 11.1.5 i was successful and heres what i did.
step one-
Back up your iTunes Library.itl file, found under ~/Music/iTunes
(even tho i didnt, i only had 3 artists in there at the time. and they didnt get erased but i advise you back up just in case.)
step two-
download itunes 10.7 from apple. i used this link Download it from Apple here
(i pulled the link from Aarons website (awesometast.com). you download 10.7 however you want but i used the link above and have had no issues).
although im not sure you need to do this step ( you may be able to download 11.1.5 itunes without 10.7, i did because i was following intructions from http://awesometoast.com/downgrading-to-itunes-10-7-from-itunes-11-on-osx/
step 3-
open Terminal
step 4-
enter in these 3 commands hitting return after each line. 1st line nothing seems to happen, 2nd line nothing seems to happen and 3rd line gives you a warning and requires password to continue. when i did it, my password didnt appear as i entered it and i hit return without looking, so i entered it in again, although im not sure i had to the 2nd time.
killall iTunes
killall "iTunes Helper"
sudo rm -rf /Applications/iTunes.app/
step 5-
drag off and dump the itunes icon (which now has the ? shadow in it) off your dock.
step 6-
install 10.7 itunes you downloaded earlier. (not sure if this part is neccesary. you may be able to just download 11.1.5 but i downloaded 10.7 because i was following Aarons steps.) itunes now works.
step 7-
go to apple and update to 11.1.5 itunes. install it. open it and you have itunes 11.1.5 in perfect working order. assuming you have a decent internet speed for the downloads, the whole process takes very little time.
with those steps above, you can solve itunes just bouncing and not launching issues and also the "thank you for downloading" and nothing downloads issue. enjoy. also i would like to give a shout out to http://awesometoast.com and thank Aaron for the knowledge that enabled me to get itunes back into my life.

ITunes won't open after downloading software update. Macbook Pro OSX10.6.8 Simple solution?

iTunes won't open after downloading software update. Macbook Pro OSX10.6.8 Simple solution? And by the way, this is apparently a common problem and Apple has completely failed to warn in advance or offer a quick straightforward solution - used to be a good company, but it's becoming just another crappy screw-the-consumer corporation.

It would help to know versions here. I'm guessing your update put an older version of something into a place where a newer version of something iTunes put in there existed. Updating an earlier OSX version to 10.6.8 is still only updating to system software that was issued several years ago. If you are running some slightly newer version of iTunes issued subsequent to 10.6.8 and you just updated to 10.6.8 you may have put in an older version of something iTunes uses. Anyway, I'm guessing here until we know exactly what you did.

Itunes won't open after I agree to lic.

itunes won't open after I agree to lic.

Refer this article to remove SC Info.sidb file
http://support.apple.com/kb/TS2363
If that does not work, Repair your Quicktime. START/ CONTROL PANEL/PROGRAMS n FEATURES/highlight QUICKTIME and click REPAIR

Iphoto 8.1.2 won't open after upgrade to 10.8.2?

iphoto 8.1.2 won't open after upgrade to 10.8.2. I have tried to upgrade iphoto to 9.1 but it won't work.

To upgrade to iPhoto '11 (version 9.x.x) you musdt purchase the upgrade in the App store - that is not a free update.
what happens? What error messages do you get? if it crashes post the first 50 lines of the crash report
LN

My itunes won't open after switching to lion

My itunes won't open after switching to lion

I had similar problem this time and last time when I upgrade/update iTune, and subsequently solved the problem through the help of this person. You may give it a try and see if this works for you. It works for me now and then. Good luck.
https://discussions.apple.com/thread/3800524
Oliver

My iTunes won't open after last update.

My iTunes won't open after last update. Can anybody help me?

I had similar problem this time and last time when I upgrade/update iTune, and subsequently solved the problem through the help of this person. You may give it a try and see if this works for you. It works for me now and then. Good luck.
https://discussions.apple.com/thread/3800524
Oliver

My Itunes won't open after a failed attempt at upgrading.

My ITunes won't open after a failed attempt at upgrading. Keep getting the error message...Failed to start because MSVCR80.dll was not found. I have tried uninstalling and reinstalling and notheing works. Help!

See Troubleshooting issues with iTunes for Windows updates.
tt2

Fire fox won't open after installing update. But it shows in my task manager as running

Firefox won't open after installing update 3.6.6 Solution page says problem has been solved, but the solution has been removed.
== This happened ==
Every time Firefox opened
== After installing update 3.6.6 ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)

Hello Chris.
Hopefully this support article is what you need:
https://support.mozilla.com/en-US/kb/Firefox+will+not+start

Aperture library won't open after using new iphoto

My Aperture library won't open after accidently using iphoto to view it. It says Aperture is outdated but I run 3.4.5 version which is the last.
Now I CAN'T DO MY WORK thanks to this lunacy.
Anyone any suggestions how to fix this ****?

Also one more thing
On the MacBook Air - Where aperture is working fine and loading the library, i tried to change the name of the library and then when I tried to open it it shouted with the error ""Error Opening Library--The library could not be imported because it is from an out of date version of Aperture 3. Please upgrade the library to the latest version of Aperture 3 and try again""
But when I changed the name back it was working fine again on the MacBook AIr
Should i be worried that when i look at the get info on my library it says it's an aperture library 3.5.1 ?
Pandava

My illustrator won't open after I install

my illustrator won't open after I install

menya,
I believe you may as well go straight to 6) on the list.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save curent artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

HT1338 exe files won't open after downloaded from Safari on my Mac OS X 10.4.11

exe files won't open after downloaded from Safari on my Mac OS X 10.4.11

I use the free Unarchiver: http://unarchiver.c3.cx/unarchiver
I have just tested it on a self-extracting Windows Internet Explorer and it opened it first time on my Mac.
However, as you have been told, normally Windows executable files cannot be opened or used on Macs.

PDF file won't open after saving it from the web. get error message file is damaged.

My PDF files won't open after saving them to Docs from the web. I get error message file is damaged. Can someone help me correct this problem on Mac Air w Mountain Lion?

I wonder if the image is being embedded somehow and there is not enough scratch disk space to render the file. Just a hunch. Check your hardrive to see how much free space is available. Also, check your RAM and see if you can upgrade ( install more, install much more ) to max out as much RAM as possible. At a minimum, check for fragmentation and do a "Correct Permissions" via Apple's Disk Utility.
But, weird things start happening when a font becomes corrupt. Not that one is, but it may be in your best interest to acquire a font management utility like Font Agent PRO ( if you don't have one already ). A good font management program can detect and disable corrupt fonts.
CS1 and OSX10.4 should be fairly compatable with the 7500, but you may have gone as far as you can go. Think about upgrading to a G4 or a G5. I believe the 7500 was pre G3 ( which I think is the minimum requirements for CS1 ).

Ports won't open after forwarding

Similar Messages

Maybe you are looking for