Portugal Infotype 0002 screen edit
Hello,
I have a requirement that Portugal want to use the same fields as Spain to store document types and number. Spain has it's own screen 2004 in module pool MP000200 and Portugal screen 2000 in module pool MPV33200.
In screen 2004 used by Spain includes two fields Document type and document number. Now Portugal want to have those fields available as well.
How should I proceed the best way?
1. Just give Portugal same screen as Spain means that Portugal will not be able to store in sub Infotype 0336. Not so good?
2. Copy screen 2004 from Spain and create a 29xx screen for Portugal in MP000200. Portugal will not be able to store in subinfotype 0336. Not so good?
3. Create a new screen 29xx in module pool MPV33600 with those two extra fields. Is this possible to do via PM01 or how do you do this?
iam working in version ECC5.0 and Ecc6.0 .......in both versions it is not coming....
regard
vamsi
Similar Messages
-
Upgrade from 4.6C to ECC 6.0 - change text of infotype 0002 screen
Hello Guru,
My client is upgrading from 4.6C to ECC 6.0. In 4.6C the field RUFNM text in infotype screen for 0002 is "Know As" where in ECC 6.0 is now "Nickname". The field is P0002-RUFNM? If I want to change the text in ECC 6.0 from 'Nickname' to "Know As". What is the best option? Modify the screen? or change the Data element? or any better way?
ThanksHi Bob,
To change the Field Text, Data Element would be the better option.
Good Luck
Om -
Middle name field activation in infotype 0002
HI all,
My requirement is to activate middle name field in infotype 0002 screen. Currently in infotype 0002 middle name field is not dsiplayed. The screen number of this list screen is 2000. I checked the infotype screen control in config and found that screen number 2044 has the middle name field. It corresponds to variable key '44'. But currently for country grouping '99', varibale key is set as blank in P0002 feature.
Now my doubt is, should i need to copy the screen number 2044 to another screen number and this new screen number need to be assigned against variable key blank in the feature?
If i copy 2044 to the new screen number, then what abt the settings made in our current screen number 2000.
Can someone help me in how to bring the middle name witout affecting the current setting in infotype 0002?HI ,
Some of the fields which are available in screen 2000 are not available in screen 2044. So when i copy 2044 and use, then i will get middle name. But the fields available in 2000 will not be displayed i guess.
Pls tell me how to handle this case. -
Poland Infotype 0002 - standard screen
Hi,
In infotype 0002 there are many standard screens for countries for example Japan has screen 2022. Is there a standard screen for Poland for infotype 0002 or should I use 2000 or 2044?
Regards,
Warren.you can use one of these 2 or copy into some new screen and use
-
Calling infotype 0002 in ALV report for showing employee photo
Hi all,
The requirment from business side is a report in which employees personal data shuold be shown with employee photo, I had tried for employee photo in ALV report but it didnt sucessed, then I went for other solution like calling transaction in ALV report.
In this case I am calling Infotype 0002 but the issue is that the transaction PA20 is coming with PERNR but I am not able to go directlly to infotype which shows employee Photo,please suggest any solution.
Thaks.
JAYHi Jay,
It is possible. Please refer the syntax for the CALL TRANSACTION
CALL TRANSACTION ta { [AND SKIP FIRST SCREEN]
| [USING bdc_tab [bdc_options]] }.
You can do a recording till the required page comes & call the transaction accordingly. Hope, you are aware about the same.
For example, I just had a solution to go to the roles tab in the user profile and I did as below:
CLEAR wa_bdcdata.
wa_bdcdata-program = 'SAPLSUU5'.
wa_bdcdata-dynpro = '0050'.
wa_bdcdata-dynbegin = k_ok.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_CURSOR'.
wa_bdcdata-fval = 'USR02-BNAME'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'USR02-BNAME'.
wa_bdcdata-fval = g_value.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_OKCODE'.
wa_bdcdata-fval = 'SHOW'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-program = 'SAPLSUU5'.
wa_bdcdata-dynpro = '0100'.
wa_bdcdata-dynbegin = k_ok.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_OKCODE'.
wa_bdcdata-fval = '=ACTG'.
APPEND wa_bdcdata TO it_bdcdata.
g_opt-dismode = 'E'.
g_opt-defsize = k_ok.
*** if user click on the User Name, call SU01
CALL TRANSACTION 'SU01' USING it_bdcdata
OPTIONS FROM g_opt.
Regards,
Selva K. -
Employee photo upload in portal and to be saved in infotype 0002
Hi Everyone,
I got an requirement where in ESS Portal, through "Change Own Data" link, employee is uploading his photo and it has to be saved in infotype 0002. Below are the doubts i have,
1. There is no field for photo in infotype 0002, so how it will be saved in 0002.
2. After uploading and clicking preview button, error was raising saying 'Error when archiving the photo'.
3. I seen in many forums that the employee photo is visible from PA30. how it will be visible in that tcode ?Hi Chris McNarney,
Sorry for long delay for replying.. According to you,
1. I checked the service under /default_host/sap/bc/conentserver/ it was activated and moreover below is the logon data,
Client 500
User XXXXXX
Language
Password Status Set
and what is the use of this logon data..
2. According to your link [https://wiki.sdn.sap.com/wiki/display/ERPHCM/Add%20Employee%20Photo%20on%20Infotype%200002?showChildren=false|https://wiki.sdn.sap.com/wiki/display/ERPHCM/Add%20Employee%20Photo%20on%20Infotype%200002?showChildren=false],
there it has 4.7 version in that they told to create A2 repository with Tcode: OAC0 with details,,
While creating the repository, keep the Document Area blank, Storage type as R/3 database, Rep. Sub-type will appear as Normal by default, Version No. as 0046 and in Contents table put 'SDOKCONT1' as the table name.
With that screen im am not able to find table name field to put 'SDOKCONT1' as input and moreover SAP system database is there instead of getting R/3 database for storage type. Screen detilas below,
Content Rep. A2 Active
Description
Document Area
Storage type
Version no. 0046 Content Server version 4.6 as the table name. -
hi,
i have added one field in infotype 0002 , by pm01 . it is not getting displayed in pa30 transaction . i have already activate module pool and layout editor plz tell me what to do .Please check the screen number of the module pool. In which screen you have added the new field? Is the same scrren is being used by PA30 screen. I am sure there is some mismatch in screen.
Regards,
Sandip -
FMLA standard hours infotype 2001 not editable when working with date range
Hi All,
The issue described below arises at the Juncture between FMLA Workbench and Absence Infotype IT2001.
When we try to tie a FMLA Request to Absences the process takes us to the Infotype PA2001 screen wherein we would like the Absence Hours Field to be Editable so that we could enter Hours (less than full day).
The process works fine when the FMLA absence is for a single day, i.e. if an employee availed a FMLA leave on a day (whether full day or part of a day) the Absence Hours field (PA2001-STDAZ) is editable and the user can enter any number of hours of his choice.
But the process faces a glitch when the FMLA absence spans over a period of time (i.e. an employee availed a FMLA leave for over a period wherein each day may or may not be a full day absence, in this scenario it would be best if the system allow the user to enter Absence Hours so that the User could enter the exact number of Absence hours correctly. But unfortunately, when an absence spans multiple days the Infotype 2001 screen dynamically turns the Absence Hours field (PA2001-STDAZ) uneditable (grayed out) and the system forcefully enters hours equal to the sum of the work schedule hours for each working day covered in the span of period for which we are trying to enter FMLA Absence Hours.
I have used the USER EXIT and the BADI route and tried to change the Screen Table to editable, but with no luck.
Wondering, if anyone of you could help me out of this glitch.
Thanks in Advance.Hi,
I don't think this is possible.
You cannot make the Hours field editable for a date range.
I don't think its feasible to enter absence hours on a day basis given a date range.
Better think of creating a custom infotype to enter absence hours .
(Design would be : based on the date range entered , say 01.01.2011 to 05.01.2011 , you should get five input enabled
boxes(dynamically) for five days to enter the absence hours , this is not possible in standard infotype ..... )
Regards,
Srini. -
Sending the enhanced Infotype 0002 outside SAP via an IDOC
Hello Friends,
We have added couple of Z fields to the standard 0002 Iinfotype table PA0002.
I can see the custom fields in the trans : PA30 screen for infotype 002.
Now, we want to send these custom fields value outside SAP via an IDOC.
Here are the steps I followed :
I created a Z Segment in an extended idoc with the structure PA0002.
I went in transaction PM01 for Infotype 0002 and added the above created Z segment as a 2nd IDOC segment.
In transaction PA30 for 002, I made changes to the custom field value for a person 12039.
Created an idoc via BD21.
IDOC generated with the Z Segment but it doesn't contain any Z custom fields.
Which step am I missing here? Do I have to have a user-exit or BADI to achieve this OR can it be done without writing any code?
Basically I
I will really appreciate your help.
Regards,
Pooja PandeyPooja,
you need to fill each field manually.
check this code i am filling ZHCMS_PI_SEMENT
data: sgmnt_e1pityp type e1pityp.
field-symbols: <wplog> type any.
field-symbols: <wplog1> type any.
data: ixxxx type e1pityp, iyyyy type e1plogi,sgmnt_hcms_pi type zhcms_pi_segment,wa_idoc_data_x type edidd, ls_idoc_data type edidd.
data: lv_p0001 type standard table of p0001 ,lv_p0002 type standard table of p0002 ,lv_p0007 type standard table of p0007 .
data: lv_p0521 type standard table of p0521 ,lv_p0710 type standard table of p0710 ,lv_p2001 type standard table of p2001 .
data: ls_p0001 type p0001,ls_p0002 type p0002,ls_p0007 type p0007 ,ls_p0521 type p0521 ,ls_p0710 type p0710 ,ls_p2001 type p2001 .
data: row_index type sy-tabix,del_index type sy-tabix.
data: lcx_root type ref to cx_root.
fILL THE E1PITYP
try.
Keep the segments which have changed date greater than last run date in update mode
read table idoc_data into wa_idoc_data_x with key segnam = 'E1PITYP'.
assign wa_idoc_data_x-sdata to <wplog> casting type e1pityp.
ixxxx = <wplog>.
loop at idoc_data into wa_idoc_data_x where segnam = 'E1PLOGI'.
row_index = sy-tabix + 1.
assign wa_idoc_data_x-sdata to <wplog1> casting type e1plogi.
iyyyy = <wplog1>.
sgmnt_e1pityp-plvar = ixxxx-plvar.
sgmnt_e1pityp-otype = ixxxx-otype.
sgmnt_e1pityp-objid = iyyyy-objid.
sgmnt_e1pityp-infty = '0001'.
sgmnt_e1pityp-begda = ixxxx-begda.
sgmnt_e1pityp-endda = ixxxx-endda.
clear ls_idoc_data.
ls_idoc_data-segnam = 'E1PITYP'.
ls_idoc_data-sdata = sgmnt_e1pityp.
insert ls_idoc_data into idoc_data index row_index.
APPEND t_idoc_data .
Get the ZZSWISSREID
sort lv_p0001 by begda descending.
read table lv_p0001 into ls_p0001 index 1.
sgmnt_hcms_pi-zzswissreid = ls_p0001-zzswissreid.
Get the custom data from IT0002
sort lv_p0002 by begda descending.
read table lv_p0002 into ls_p0002 index 1.
sgmnt_hcms_pi-zzglobalid = ls_p0002-zzglobalid.
sgmnt_hcms_pi-zzsource_id = ls_p0002-zzsource_id.
sgmnt_hcms_pi-zzlegacy_emp_id = ls_p0002-zzlegacy_emp_id.
ls_idoc_data-segnam = 'ZHCMS_PI_SEGMENT' .
ls_idoc_data-sdata = sgmnt_hcms_pi.
row_index = row_index + 1.
insert ls_idoc_data into idoc_data[] index row_index.
clear : lv_p2001[] , lv_p0001[] , lv_p0002[] , lv_p0710[] ,lv_p0007[], lv_p0521[], ls_p2001 , ls_p0001 , ls_p0002 , ls_p0710 ,ls_p0007, ls_p0521 .
APPEND t_idoc_data.
endloop.
Thanks
Bala Duvvuri -
How do everyone
We have just created a new client 333 on our dev machine. We are currently
using the existing 010 client.
When I look at infotype 0002 via PA20 on the new client 333 I can see that
there are certain customised ZZ fields missing.
I created a dummy transport in 010 to include the table definition CI_P0002,
the report source code and the screen.
I then imported this transport via SCC1 into the new client 333.
It ran successfully, but the fields are still missing from PA20.
Does anybody know if I am doing anything wrong????
Cheers
AndyHi again,
1. The procedure is a little tricky.
2. To confirm, just goto se09, and check your request objects.
The MP000200 entries must be there.
(If the procecudure was done 100% correct)
3. Just make sure, in PM01,
u press the BUTTON in app toolbar
"INCLUDE IN REQUEST"
and then save button.
(Only when we do this step, the etnries get included in request)
regards,
amit m. -
Hi All,
I have couple of problems in infotype 0002.
1. field ANZKD(number of children) is missing in infotype.
2. marital status key in structure P0002 and in dynamic actions is FAMST but in Infotype marital status key is FATXT.
I am using country grouping 10 for USA. Is there different screens available? If yes how to change screen.
We have done no screen exits so far!!
Thanks in Advance.
Vivek.Hi,
You should work on view T588M via t-code sm30.
You can either change screen or control the screen fields there.
1. ANZKD is alreay there in 2010, just choose the entry to set it to the value other than hide.
MP000200 2000 10 2010 0
2. Just go ahead with FAMST, FATXT is the text display on screen. But FAMST stored in database.
Hope helps,
Chen Jian -
Missing of Gender field in infotype 0002
Hi All,
Recently we have upgraded the patch level from 0026 to 0037. The problem is I am unable to see the Gender field(GESCH) in Infotype 0002. I have checked in Std screen of P0002 there also i am unable to find the field. But in the database table the field is available.Previously it was available in infotype 2.
Due to the missing of standard field Gender (GESCH) in Infotype 0002 I am unable to upload the data and also unable to take the std copies of PF form 5 and form 10 where system is automatically taking the Gender column as F(female) instead of M(Male).As per the standard code it checks this field GESCH for "1" and outputs gender as "M" if "1" and "F" otherwise.
Any help in this regard will be highly appreciated.
Regards,
Anjenaya PrasadHi,
Activate the field in the table T588M Q0002-GESCH to standard.
Path: PM->PA->Customizing user interfaces-> Change screen Modifications
Regards
Devi -
Need to upload employee photos against infotype 0002
Hi,
We have an urgent reqirement to load the photos of all the employees agianst the infotype 0002 which need to be accesed by the employees and managers via enterprise portal.
Can anybody help me....
Thanks in advance
KrishnaThe steps provided you are very appropiate , but you can also check the following settings incase you dnt achieve your requirements.
Q. How to attached the Photo in IT0002
1.Create a number range for SAP Archive Link :
IMG>Basis Components>Basis Services>SAP Archive Link>Basic Settings>Maintain number ranges.
Tcode OANR. Create range 01 from 0000000001 to 9999999999 without the external number flag.
2.Document type HRICOLFOTO must exist with document class JPG.
IMG>Basis Components>Basis Services>SAP Archive Link>System Settings>Maintain document types.
Table TOAVE, Tcode OAC2.
3.Document type HRICOLFOTO must be linked to object type PREL and IT0002.
IMG>Personnel Management>Personnel Administration>Tools>Optical Archiving>Set up Optical Archiving in HR.
View V_T585O, no Tcode. In all three columns there ara minuses, dont put a flag in the check box.
4.Check which content repository (Archive) is linked to document type HRICOLFOTO and object type PREL.
IMG>Basis Components>Basis Services>SAP Archive Link>Basic Settings>Maintain Links.
Table TOAOM_C, Tcode OAC3
5.Create this content repository with storage type FILE archive.
IMG>Basis Components>Basis Services>SAP Archive Link>Basic Settings>Maintain content repositories.
Tcode OAC0
Storage type FILE archive can be attained by clicking on the field Storage type and clicking somewhere else in the screen with the right mouse button. Choose Possible entries and only then you get a list of all values. FILE Archive is entry number 08. Choose Version no. 0031 and Archive path something (e.g. C:\).
6.Link photo to personnel number.
Menu>Tools>Business Documents>Miscellaneous>Stored Documents. Tcode OAAD.
Click on the Create button. Business object PREL and Docyment type HRICOLFOTO. Click on create (fill in the right personnel number in the pop up and click Continue). Choose the photo (as a JPG file) from the place where it is saved (e.g. hard disk). SAP will notify that the Stored Document was created succesfully. Photo is visible via PA10, PA20, PA30, PA40. Double-click to magnify photo.
To delete archived document :
Tcode OAAD, click Find. In docyment type field select HRICOLFOTO and after execute you get a list of all documents. Select appropriate document and click on delete icon.
thnkx
bhanu -
Infotype 0002: Exception INTERNAL_ERROR after saving
Hi All
This error we are getting when we Applied Service package 18.
within a hiring action, after you save infotype 0002 ("Personal Data"), the exception INTERNAL_ERROR occurs with the runtime error RAISE_EXCEPTION.
The exception is triggered in the method CHECK_AUTHORIZATION in the class CL_HRPAD00AUTH_CHECK_STD.
So if any body is getting this error then please Apply this SAP Note 1366651 which is released By SAP on 20 July 2009.
Thanks & Regards
Gaurav Mittal
Technical Consultant - SAP HR
Edited by: Gaurav Mittal on Jul 21, 2009 3:13 AMWhat are the logs saying? You will most likely have a bit of code that is incorrect.
Log into the Coldfusion administrator and have a look at application.log or coldfusion-out.log. It should tell you what the error is and possibly the line number. -
PA30 ( Infotype 0002)
hi,SAP SIRS,
Pls do find the solution for changing text "Birth Name" into "Middle Name" in infotype 0002 in PA30.
helpme .com
satyHi Sati ,
Their Is Two Ways To Do IT.
1st Method.
Go For T588M Table
Or
Go To VIew V_T588M
Or
In IMG
U Go For
Personal Management,
->Personal Adminstration,
->Customizing User Interfaces,
->Change Screen Modifications,
Select MP000200 And The Coreesponding Screen Number
Change The Field Last Name By Birth Name.
2nd Method.
Go To Tcode PM01
And Your Infotype.
Screen (Correponding Screen Number)
In The Layout Editor
Using Access Key
Change the Text Last_name__ By Birth_name.
Generate All Objects.
Thanks & Regards,
Shiva vs.
Thanks & Regards,
Shiva vs.
Maybe you are looking for
-
I have a 1st generation Time Capsule with current firmware. Can I define the time periods when my children's devices have access to the wi-fi network?
-
Send to Final Cut Pro in Color off an external Hard Drive, causes Color to Crash
Okay, so I'm having some Color issues guys... I'm color correcting a feature right now, and just completed the CC with Color. I did the entire color correct on an internal hard drive on a Mac Pro. My client wanted to take a look at the CC on a differ
-
Tcode to enter text in the front screen
I wanted to change the front screen display and the picture when i login to the system It is like , whenever a user enters the page of entering username and password to login to sap system, it should contain some text to the right side. After logging
-
Hi all! I use AppServerPE9.0 and i need to custom error page web.xml: <error-page> <exception-type>java.lang.Throwable</exception-type> <location>/error.jsp</location> </error-page> <error-page> <error-code>403</er
-
How to make private subscribed-to calendars ALWAYS require password?
Hi, I've published a private calendar to my idisk, and i subscribed to it from a different computer with my idisk username and password and all is fine, EXCEPT : It appears that once you subscribe to a private ical calender you only need to enter you