Portuguese Keyboard on Macbook pro retina display.

Dear All.
Is there a possibility to buy a macbook pro retina display with portuguese keyboard in Apple Store in the U.S.A.?
Regards.
Emilio Silva

Hey, I have the same problem too. It is making me angry. Both my thunderbolt outputs work, but the hdmi freezes both screens. I then have to shut the computer off by holding the power button and re-boot. Have you found a solution? I NEED my hdmi port. Please get back to me. Thanks!

Similar Messages

  • Can i buy a macbook pro retina display in US with portuguese keyboard?

    Can Apple or someone else tell me if is possible to buy in Apple Retail Store in U.S. a Macbook Pro retina Display  with portuguese keyboard?

    It's difficult to get one at a shop or Apple Online Store because build-to-order Macs aren't available at them unless they are very popular.
    The only option you have is to call Apple (1-800-MY-APPLE) and see if you can order a MacBook Pro with a Portuguese keyboard. In case you can, this will take days because it has to be ordered and delivered to the USAFD

  • Facetime and iMessage on Macbook Pro Retina display slow after Yosemite 10.10.3 Update

    Hi
    I recently updated my Macbook Pro Retina display to Yosemite 10.10.3 update. I see that the Facetime and iMessage has become relatively very slow. Like for example when someone calls on my phone it takes like more than 15 seconds + to show up on my macbook. Earlier it used to be like instant!
    I started seeing this problem on Yosemite 10.10.3 update only. Also the same is the story with iMessage. When I get an SMS or an iMessage from my friends it takes like a good 30 seconds + to show up on my macbook pro.
    Just for your information, this is the version of macbook i am using
    MacBook Pro (Retina, 13-inch, Late 2013)
    2.4 GHz Intel Core i5
    8 GB 1600 MHz DDR3
    251GB Flash storage
    As Suggested by someone I also tried RESETTING my computer's PRAM. That didn't seem to help either. Can anyone help. If it is a genuine bug in Apple Yosemite, I'd like to file a bug in the community.
    Regards
    Shreyas

    Hi Barney,
    Here is the output you seek -->
    Problem description:
    FaceTime takes 30 seconds to open up
    EtreCheck version: 2.1.8 (121)
    Report generated 19 April 2015 8:13:14 am IST
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (Retina, 13-inch, Late 2013) (Technical Specifications)
        MacBook Pro - model: MacBookPro11,1
        1 2.4 GHz Intel Core i5 CPU: 2-core
        8 GB RAM Not upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1600 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1600 MHz ok
        Bluetooth: Good - Handoff/Airdrop2 supported
        Wireless:  en0: 802.11 a/b/g/n/ac
        Battery Health: Normal - Cycle count 430
    Video Information: ℹ️
        Intel Iris
            Color LCD spdisplays_2560x1600Retina
    System Software: ℹ️
        OS X 10.10.3 (14D136) - Time since boot: 23:47:26
    Disk Information: ℹ️
        APPLE SSD SM0256F disk0 : (251 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Macintosh HD (disk0s2) / : 250.14 GB (111.66 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
    USB Information: ℹ️
        Apple Internal Memory Card Reader
        Apple Inc. BRCM20702 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. Apple Internal Keyboard / Trackpad
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Library/Application Support/Viscosity
        [not loaded]    com.viscosityvpn.Viscosity.tap (1.0) [Click for support]
        [not loaded]    com.viscosityvpn.Viscosity.tun (1.0) [Click for support]
    Launch Agents: ℹ️
        [loaded]    com.citrix.AuthManager_Mac.plist [Click for support]
        [running]    com.citrix.ReceiverHelper.plist [Click for support]
        [running]    com.citrix.ServiceRecords.plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
        [loaded]    com.realvnc.vncserver.peruser.plist [Click for support]
        [not loaded]    com.realvnc.vncserver.prelogin.plist [Click for support]
        [running]    net.juniper.pulsetray.plist [Click for support]
        [loaded]    org.macosforge.xquartz.startx.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.google.keystone.daemon.plist [Click for support]
        [loaded]    com.macromates.auth_server.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
        [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
        [loaded]    com.realvnc.vncserver.plist [Click for support]
        [loaded]    com.sparklabs.ViscosityHelper.plist [Click for support]
        [running]    net.juniper.AccessService.plist [Click for support]
        [not loaded]    net.juniper.UninstallPulse.plist [Click for support]
        [loaded]    org.macosforge.xquartz.privileged_startx.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    Application  (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
        AdobeResourceSynchronizer    Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
    Internet Plug-ins: ℹ️
        JavaAppletPlugin: Version: Java 8 Update 31 Check version
        o1dbrowserplugin: Version: 5.41.0.0 - SDK 10.8 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        net.juniper.DSSafariExtensions: Version: Unknown [Click for support]
        AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
        FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
        Silverlight: Version: 4.1.10329.0 [Click for support]
        Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
        PepperFlashPlayer: Version: 17.0.0.169 - SDK 10.6 [Click for support]
        CitrixICAClientPlugIn: Version: 11.8.2 - SDK 10.7 [Click for support]
        googletalkbrowserplugin: Version: 5.41.0.0 - SDK 10.8 [Click for support]
        AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        SharePointBrowserPlugin: Version: 14.4.9 - SDK 10.6 [Click for support]
        MeetingJoinPlugin: Version: Unknown - SDK 10.6 [Click for support]
    Safari Extensions: ℹ️
        ClickToFlash
        Reload Button
        YoutubeWide
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        Java  [Click for support]
        MacFUSE  [Click for support]
    Time Machine: ℹ️
        Time Machine not configured!
    Top Processes by CPU: ℹ️
            18%    mds
            15%    Safari
             6%    WindowServer
             5%    com.apple.WebKit.Networking
             1%    ocspd
    Top Processes by Memory: ℹ️
        455 MB    softwareupdated
        206 MB    Microsoft Outlook
        153 MB    com.apple.WebKit.WebContent
        146 MB    WindowServer
        137 MB    Safari
    Virtual Memory Information: ℹ️
        298 MB    Free RAM
        3.76 GB    Active RAM
        3.36 GB    Inactive RAM
        1.17 GB    Wired RAM
        4.45 GB    Page-ins
        901 KB    Page-outs
    Diagnostics Information: ℹ️
        Apr 18, 2015, 08:25:23 AM    Self test - passed
        Apr 17, 2015, 06:29:29 PM    /Library/Logs/DiagnosticReports/ncproxyd_2015-04-17-182929_[redacted].crash
        Apr 17, 2015, 03:11:05 PM    /Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2015-04-17-151105_[ redacted].cpu_resource.diag [Click for details]

  • Macbook Pro Retina display says "No batteries available" after legitimate system software update

    Issue Description
    On July 26, 2012 I placed an order with Apple store for the 15-inch MacBook Pro with Retina display with the following configuration (Order # W269108641 Serial# C02J52S9DKQ5):
    Processor 2.6GHz Quad-core Intel Core i7, Memory 16GB 1600MHz DDR3L SDRAM, Flash Storage 512GB Flash Storage
    It was delivered August 8, 2012. It cost me $3,265.16
    I have since equipped it with accessories like a wireless apple keyboard ($69), wireless mouse ($69), USB super drive ($79), VGA display adapter ($29), Ethernet Adapter ($29) and the excellent sleeve/pouch from Pack & Smooch GmbH (GBP60))
    It's so heavily configured because it’s my main workstation. I additionally bought and installed Parallels 8 so I can run Windows 8 in a Virtual Machine because I have a few things on Windows that I need to be productive. This setup has been a dream machine until a little over a week ago.
    In the one year since I bought it, I have had only 2 issues;
    • A case of display flickering that resulted after a system software update on August 28, 2013
    (Case ID 498560320 - not much help came from Apple Support but fortunately the problem went away a week later after another system software update)
    • A case of battery failure that resulted after a system software update on October 11, 2013
    (Case ID 516534003 - I have gone through all recommendations from Apple support as I will detail below)
    Symptoms after system software update
    • Battery Icon on status bar disabled with a message "No batteries available"
    • Battery not charging
    • LED on the Magsafe power adapter no longer show
    • Keyboard backlights no longer show
    • Notebook fan loud/noisy and permanently at high speed
    • Date and time reset to a date in the past at each restart
    • Notebook starts up the moment the Magsafe adapter is connected without waiting for power button to be pressed
    • An update for "MacBook Pro Retina Display SMC Update 1.2" keeps appearing in Software Update
    Recommendations from Apple Support
    • Perform SMC Reset (http://support.apple.com/kb/HT3964)
    (Done - no change in status)
    • Run Disk Utility
    (Done - no errors found)
    • Run Apple Hardware test (http://support.apple.com/kb/HT1509)
    (Done - no errors found, no change in status)
    • Visit Apple Store
    (Done - they confirmed no issue with Magsafe adapter. For a fee they are happy to change the battery if confirmed faulty and re-install the OS if the battery is not the issue but am uncertain that the OS re-install will resolve the issue because I have read online about a similar case where a re-install did not resolve the issue)
    • Check System Report/Hardware/Power
    (Done - Health Information/Cycle count:0, Battery installed: No)
    • Perform NVRAM Reset (http://support.apple.com/kb/HT1379?viewlocale=en_US)
    (Done - no change in status)
    Comments and additional Observations
    Please note the following;
    • All of the symptoms above appeared after a system software update on October 11, 2013
    • This update first appeared on October 10, 2013 but I was too busy to apply it especially because it required a system restart
    • The battery was fully charged when I decided to apply the update on October 11 morning after I got to work
    • Normally on full charge, the battery will typically deliver 3 - 4 hours depending on usage and up to 6 hours when idle
    • The said update was not interrupted or anything of the sort
    • On the day the symptoms were first observed when I first logged the case with apple, the system ran on battery while it performed the Apple Hardware Test while I was driving to the Apple support store on my way home even though the status bar was indicating "No battery available" 
    I make the following deductions solely based on my observations
    • An apple authorized system software update broke the system
    • The nature of the failure is communication related - the battery charging circuit and related systems are not getting the necessary instructions to function as they should (It's a known fact that rechargeable batteries do NOT die instantaneously, the total hours they run on full charge will gradually reduce over time as they degrade on use)
    • It’s possible the update is not being applied correctly because the item “MacBook Pro Retina Display SMC Update 1.2” is still in Software update after subsequent attempts to apply it
    • The high fan speed is nothing to do with high temperature or high processor load, according to the Activity Monitor utility the highest CPU utilization 1.9 – 4.7% is by kernel_task (PID 0) followed by activitymonitord at 1.8 – 2.2% (PID 481)
    • The symptoms match what an SMC reset should resolve according to Apple documentation
    • This is a known problem within Apple based on the documentation provided and the numerous similar cases reported online
    Summary;
    The system is running OS X 10.8.5
    I have provided this detailed documentation in the hope that someone who understands this system can say exactly what is going on. It's meant to be a dream machine but now you can hear the fan from across a large room, the battery doesn't charge and is in fact not recognized so I lose data if the Magsafe adapter gets unplugged, and I have to reset the system date each time I restart the notebook.
    I've used this notebook with utmost care for a little more than a year, this investment of over $3,500 could have bought 3 high end notebooks from DELL or HP but I chose Apple.
    I have suffered untold loss in productivity in the last 10 days since this issue occurred, I respectfully request Apple to fix my notebook.

    Issue Description
    On July 26, 2012 I placed an order with Apple store for the 15-inch MacBook Pro with Retina display with the following configuration (Order # W269108641 Serial# C02J52S9DKQ5):
    Processor 2.6GHz Quad-core Intel Core i7, Memory 16GB 1600MHz DDR3L SDRAM, Flash Storage 512GB Flash Storage
    It was delivered August 8, 2012. It cost me $3,265.16
    I have since equipped it with accessories like a wireless apple keyboard ($69), wireless mouse ($69), USB super drive ($79), VGA display adapter ($29), Ethernet Adapter ($29) and the excellent sleeve/pouch from Pack & Smooch GmbH (GBP60))
    It's so heavily configured because it’s my main workstation. I additionally bought and installed Parallels 8 so I can run Windows 8 in a Virtual Machine because I have a few things on Windows that I need to be productive. This setup has been a dream machine until a little over a week ago.
    In the one year since I bought it, I have had only 2 issues;
    • A case of display flickering that resulted after a system software update on August 28, 2013
    (Case ID 498560320 - not much help came from Apple Support but fortunately the problem went away a week later after another system software update)
    • A case of battery failure that resulted after a system software update on October 11, 2013
    (Case ID 516534003 - I have gone through all recommendations from Apple support as I will detail below)
    Symptoms after system software update
    • Battery Icon on status bar disabled with a message "No batteries available"
    • Battery not charging
    • LED on the Magsafe power adapter no longer show
    • Keyboard backlights no longer show
    • Notebook fan loud/noisy and permanently at high speed
    • Date and time reset to a date in the past at each restart
    • Notebook starts up the moment the Magsafe adapter is connected without waiting for power button to be pressed
    • An update for "MacBook Pro Retina Display SMC Update 1.2" keeps appearing in Software Update
    Recommendations from Apple Support
    • Perform SMC Reset (http://support.apple.com/kb/HT3964)
    (Done - no change in status)
    • Run Disk Utility
    (Done - no errors found)
    • Run Apple Hardware test (http://support.apple.com/kb/HT1509)
    (Done - no errors found, no change in status)
    • Visit Apple Store
    (Done - they confirmed no issue with Magsafe adapter. For a fee they are happy to change the battery if confirmed faulty and re-install the OS if the battery is not the issue but am uncertain that the OS re-install will resolve the issue because I have read online about a similar case where a re-install did not resolve the issue)
    • Check System Report/Hardware/Power
    (Done - Health Information/Cycle count:0, Battery installed: No)
    • Perform NVRAM Reset (http://support.apple.com/kb/HT1379?viewlocale=en_US)
    (Done - no change in status)
    Comments and additional Observations
    Please note the following;
    • All of the symptoms above appeared after a system software update on October 11, 2013
    • This update first appeared on October 10, 2013 but I was too busy to apply it especially because it required a system restart
    • The battery was fully charged when I decided to apply the update on October 11 morning after I got to work
    • Normally on full charge, the battery will typically deliver 3 - 4 hours depending on usage and up to 6 hours when idle
    • The said update was not interrupted or anything of the sort
    • On the day the symptoms were first observed when I first logged the case with apple, the system ran on battery while it performed the Apple Hardware Test while I was driving to the Apple support store on my way home even though the status bar was indicating "No battery available" 
    I make the following deductions solely based on my observations
    • An apple authorized system software update broke the system
    • The nature of the failure is communication related - the battery charging circuit and related systems are not getting the necessary instructions to function as they should (It's a known fact that rechargeable batteries do NOT die instantaneously, the total hours they run on full charge will gradually reduce over time as they degrade on use)
    • It’s possible the update is not being applied correctly because the item “MacBook Pro Retina Display SMC Update 1.2” is still in Software update after subsequent attempts to apply it
    • The high fan speed is nothing to do with high temperature or high processor load, according to the Activity Monitor utility the highest CPU utilization 1.9 – 4.7% is by kernel_task (PID 0) followed by activitymonitord at 1.8 – 2.2% (PID 481)
    • The symptoms match what an SMC reset should resolve according to Apple documentation
    • This is a known problem within Apple based on the documentation provided and the numerous similar cases reported online
    Summary;
    The system is running OS X 10.8.5
    I have provided this detailed documentation in the hope that someone who understands this system can say exactly what is going on. It's meant to be a dream machine but now you can hear the fan from across a large room, the battery doesn't charge and is in fact not recognized so I lose data if the Magsafe adapter gets unplugged, and I have to reset the system date each time I restart the notebook.
    I've used this notebook with utmost care for a little more than a year, this investment of over $3,500 could have bought 3 high end notebooks from DELL or HP but I chose Apple.
    I have suffered untold loss in productivity in the last 10 days since this issue occurred, I respectfully request Apple to fix my notebook.

  • 10.1 macbook pro retina display sticks sometimes

    Hello community of apple.
      I have a macbook pro retina display 15 inch 10.1 does no more than three weeks.
    when I use the computer for the day to day operating system feel pasted.
    example: when I have a program in full screen and then I want to see a program on the desktop using the keyboard ... usually stick a little.
    Also when I want to maximize and minimize a program gets too slow.
    This seems really strange, because the computer is an i7 and has a fairly large graphics card.
    regards

    any ideas?

  • MacBook Pro Retina Display Quit - A1502

    My MacBook Pro Retina display has quit. It stopped working in the middle of operation and will not come on. The computer boots fine (at least chimes), but nothing in the display. Have tried all possible keyboard resets--no luck. It was not set up for sharing, so can't log in remotely. Currently in Mexico, will bring to Apple Store on return. Any others with similar failures?
    Stan

    Do you mean beeps like one of these?
    Mac computers: About startup tones - Apple Support
    1 tone, repeating every 5 seconds: This indicates no RAM is installed.
    3 successive tones, a 5 second pause (repeating): This indicates RAM does not pass a data integrity check.
    1 long tone while holding down the power button: Indicates an EFI ROM update is in progress on a computer manufactured before 2012.
    3 long tones, 3 short tones, 3 long tones: Indicates EFI ROM corruption is detected and the computer is in EFI ROM recovery mode.

  • Macbook pro retina display getting too hot

    Hello,
    I bought a macbook pro retina display:
    2.7 quad core/16GB RAM/1GB Nvidia 650m/768 SSD
    When I copy files like 20 or 30 GB from an external to my retina the keyboard becomes hot and GPU 141 F (61C).
    For playing game it becomes more hot!!!
    I don't know why new macbook pro would be like this.. before I had macbookpro 13" 2011 it wouldn't be like this!
    Any one got any idea what's causing this? it's not just me I searched in google almost all got same issue!
    I hope it would be from OS and Mountain Lion would fix it.

    Bfore you run to the store try this SMC ret, it fixes
    Battery management
    Thermal management

  • Macbook pro retina display working slow

    Yesterday, I woke up the macbook pro from sleep mode and i had several apps opened.
    Then when i did the mission control it was working very slowly. All the gestures of the track pad were working slowly.
    Then after a while it started to freeze. So I restart the laptop, but the problem did not solved.
    Its working slow, and its been almost 15 days from the day i bought the laptop.
    I have a macbook pro retina display 15" 16gb ram and 512gb flash storage.
    Please Help me!!

    My retina MacBook Pro has had terrible graphics performance problems for a couple of weeks. I searched all over various forums and tried everything: resetting SCM, manually selecting discrete/integrated graphics card, deleting graphics kexts, etc. Nothing helped until I found this: https://discussions.apple.com/message/19880198#19880198
    Now my rMBP has silky smooth graphics again!
    The directions in that post are a little hard to understand so I cleaned them up here:
    Step 1: Delete system windowserver preferences
    In the Finder, from the menu bar, select "Go -> Go to Folder..."
    Enter: /Library/Preferences/
    Delete the file called com.apple.windowserver.plist
    Step 2: Delete user windowserver preferences
    In the Finder, from the menu bar, select "Go -> Go to Folder..."
    Enter: ~/Library/Preferences/ByHost/
    Delete all files that start with com.apple.windowserver   (On my rMBP, there was one file called com.apple.windowserver.12AFB147-95D6-5C70-8F62-C1E4F2BE81BE)
    Step 3: Reset the PRAM
        (These instructions are from http://support.apple.com/kb/HT1379)
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    Hopefully this helps others with bad graphics performance on retina MacBook Pros.
    For anyone that wants to check out the problematic plists from my rMBP, here are the files:
    http://jherrman.com/slow-rmbp-2012/com.apple.windowserver.plist
    http://jherrman.com/slow-rmbp-2012/com.apple.windowserver.12AFB147-95D6-5C70-8F6 2-C1E4F2BE81BE.plist
    Jeremy Herrman

  • Hi folks! Macbook Pro Retina Display burns

    Hi folks, I don't really know if this is normal, but my Macbook Pro Retina Display litteraly burns at the top of it, quite sure there is the battery. What I can't get is why is it so hot!!
    I've been looking into the web for any cooling station that will help me out with it, but can't find any related or at least supported by Apple. As far as I know there are any!!
    Have you got any idea about where to look for?
    I will really appretiate any kind of help!!!!
    Cheers!!

    they do get very hot in the area between the top of the keyboard/bottom of screen
    if the keys are hot that they are uncomfortable to use then i would concede there is an issue
    are the fans running properly? if it's that hot they should be turning on

  • How can I open Adobe Bridge CS6 in high resolution on my MacBook Pro Retina display?

    How can I open Adobe Bridge CS6 in high resolution on my MacBook Pro Retina display? When I click Get Info, the "Open in Low Resolution" box is marked and locked. How can I unmark this box? I currently run 10.9.1. I can open Adobe Photoshop CS6 in high resolution without any problem. Any advice would be much appreciated. Thanks.

    There is no such thing. In CS6 only PS itself is Retina compatible. You would have to use CC for full Retina support.
    Mylenium

  • How do I use my Macbook pro retina display as a monitor for a PC?

    How do I use my Macbook pro retina display as a monitor for a PC?

    MacQueries wrote:
    How do I use my Macbook pro retina display as a monitor for a PC?
    Unfortunately, that is not possible. The computer only can "output" your display image, it cannot "input" an image from an external computer and display it on your MacBook's retina display.

  • I just brought a brand new Macbook pro retina display, when i connect it to my apple tv through airplay its too slow and when it try to play a movie apply tv is always a minute or 2 behind. How can i fix this?

    I just brought a brand new Macbook pro retina display, when i connect it to my apple tv through airplay its too slow and when it try to play a movie apply tv is always a minute or 2 behind. How can i fix this?

    Hello HanaAmer1,
    We've an article which provides troubleshooting steps that can help get AirPlay workign correctly.
    iTunes: Troubleshooting AirPlay and AirPlay Mirroring
    http://support.apple.com/kb/TS5209
    Cheers,
    Allen

  • How do i connect my macbook pro retina display to lcd projector

    How do i connect my macbook pro retina display to lcd projector?

    Depends on what type of video connection the projector accepts. Most common would be DVI, VGA or HDMI. Review this article for more information: http://support.apple.com/kb/ht3235

  • HT2807 how to know my macbook pro retina display is lg or samsung ? thank you

    Pls Help , do anyone Know . How to check my macbook Pro Retina Display Is LG or Samsung ? thank you

    Type this in Terminal
    ioreg -lw0 | grep \"EDID\" | sed "/[^<]*</s///" | xxd -p -r | strings -6
    it will give a string of numbers/letters
    if they start with "LP" you have an LG screen
    if they start with "LSN" you have a sansung screen

  • Will an Infra-Red Adapter work with a macbook pro retina display so I can use the apple TV remote for presentations?

    I have always used the apple TV remote for my presentations.  I bought a retina display last year for the betterment of my presentations and now I have to stand near my computer and hit a button to change my slides where as before I used my remote.  Will a infra-red adapter work with the apple TV remote in the macbook pro retina display?  Love my computer, but very disappointed not to have a remote for presentations that does not need the internet.  Does anyone have any ideas?

    Yes, I used that and it works great if you have wireless connection.  Im looking for  a remote that worked like the apple TV remote.  My questions is, "Is there a USB infra-red remote that works with mac.  I have found this one: Keyspan EZ1 easy presenter.  It claims with works with PC and Mac and the reviews are good.  Does anyone know anything about it or if it works with retina display macs?

Maybe you are looking for

  • Error during asset transfer: No depr areas for receiving revenue

    Hi.... when I am posting an asset transfer transaction [Inter company transfer with transfer method 2: Net method] and simulating, I am getting an error message stating "No Depr areas for receiving the revenue". Kindly help me solve this error. Thank

  • I go to open FCP X and iMovie opens?

    It's the strangest thing.  I can see the FCPx icon but when I open it, I get iMovie - every time.  The widows are locked in place, I have no viewer window, it wants to add all this meta-tagging, there's no cohesive timeline, it always wants to use th

  • Questions can be asked in sap sd tecnical round?

    what kind of questions can be asked in sap sd tecnical round?

  • Problems fecthing with xmltable using xmlnamespaces

    Hi, I've the following XML save in a table in a XMLTYE field <ORU_R01 xmlns="urn:hl7-org:v2xml" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <MSH> <MSH.1>|</MSH.1> <MSH.7> <TS.1>200804090000</TS.1> </MSH.7> </MSH> </ORU_RO1> When I've tried

  • Difficut in designing some part of this MATLAB program in labview

    Program of Transmitter (matlab) clear         clc block=2; n=1;                    %no.of users m=2;                  %data length sl=2;                 %spread length chiplen=m*sl;        %chip length itnum=30; ebnostart=0;     %step iteration ebnos