POS(1) Work Rolled back: tExcept 18702 in APS_CHARACT_MODIFY
Hi Gurus,
CIF queue getting blocked with error "An SQL Error Occurred". Short dump happening.
Runtime Error: DBIF_DSQL2_SQL_ERROR
POS(1) Work Rolled back: tExcept 18702 in APS_CHARACT_MODIFY.
Live Cache - Logs:
Kindly help in fixing this issue.
Regards
Sadeesh
Hello Sadeesh,
similar cases were solved by note 1561212.
Please also check/apply the following notes:
1561212 - SQL error in CIF queue if production date after 12/31/2034
1556393 - OM17: Different availability dates/times for stocks
1519274 - Shelf life data of sales orders is not transferred
If the issue will be NOT solved after 4 notes applied, please create the SAP message to SCM-APO-INT with more detailes on the SCM version, SP, what order you transfered, attach the ABAP dump & open the connection to you SCM system.
Regards, Natalia Khlopina
Similar Messages
-
Unable to use iTunes for about a month on my PC
Have PC with windows 7 (64)
Own an iPad2, which is working with no problems
When I try to install iTunes it repeatedly fails via "Roll back" Tells me to reinstall, which does not work.
Tried latest update iTunes 11, same problem
Prepared to uninstall iTunes and start all over again, but how do I do this?hi mate i think i may have just solved this for you. had the same problem as you, i uninstalled all apple products and quicktime and safari, did a disk clean up and deleted old restore points(might not need to but did it anyway) downloaded itunes from explorer and managed to install the new itunes 11 wooohooooo hope this helps buddy
-
Differences between Commit work, Logical Unit of Work and Roll back work
Hi all,
Can any one explain me in details what is the difference between Commit Work, Logical Unit of Work and Roll back work. Pls explain by providing some example.
and also explain me where and when these are used and what are the importance of using these.
Thanks in advance.
Regards
Ramana Prasad.THi Ramana Prasad,
A Logical Unit of Work (LUW or database transaction) is an inseparable sequence of database operations which must be executed either in its entirety or not at all. For the database system, it thus constitutes a unit.
LUWs help to guarantee database integrity. When an LUW has been successfully concluded, the database is once again in a correct state. If, however, an error occurs within an LUW, all database changes made since the beginning of the LUW are canceled and the database is then in the same state as before the LUW started.
An LUW begins
o each time you start a transaction
o when the database changes of the previous LUW have been confirmed (database
commit) or
o when the database changes of the previous LUW have been cancelled (database rollback)
An LUW ends
o when the database changes have been confirmed (database commit) or
o when the database changes have been canceled (database rollback)
COMMIT WORK.
Executes a database commit and thus closes a logical processing unit or Logical Unit of Work ( LUW ) (see also Transaction processing ). This means that
all database changes are made irrevocable and cannot be reversed with ROLLBACK WORK and
all database locks are released.
COMMIT WORK also
calls the subroutines specified by PERFORM ... ON COMMIT * executes asynchronously any update requests (see CALL FUNCTION ... IN UPDATE TASK ) specified in these subroutines or started just before,
processes the function modules specified in CALL FUNCTION ... IN BACKGROUND TASK ,
cancels all existing locks (see SAP locking concept ) if no update requests exist,
closes all open database cursors (see OPEN CURSOR ) and
resets the time slice counter to 0.
COMMIT WORK belongs to the Open SQL command set.
Return code value
The SY-SUBRC is set to 0.
ROLLBACK WORK.
Closes a logical processing unit by reversing all database changes made since the last COMMIT .
You use this statement if you cannot be certain that all the database changes have been executed correctly.
The update routines are not performed.
ROLLBACK WORK belongs to the Open SQL command set.
Note
If the ROLLBACK statement occurs within a SELECT loop, the processing cannot continue because the database cursor is invalid. After the ROLLBACK statement, you should therefore ensure that all SELECT processing has been explicitly terminated.
<b>Plz. Avoid Duplicate Threads.</b>
Hope this resolves your query.
Reward all the helpful answers.
Regards -
For the second time in as many months I have had to roll back to version 3.6.19 as the new firefox (versions 4 or 5) was unable to use 'no script', 'forecastfox' or 'download status bar'. I hope mozilla will continue to support v3.6.19 until my issues have been resolved. Also the after one or two clicks on any of the aforementioned extensions on the add-on bar/page caused v5 to hang.
Create a new profile as a test to check if your current profile is causing the problems.
See Basic Troubleshooting: Make a new profile:
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
After implementing SP1 for Windows 7 Firefox "hang"(I got the startscreen, but could not do anything: no response). After a roll back removing SP1 Firefox works again.
I installed SP1 also some months ago and had the same problems, also then this was solved also by a roll back removing SP1.
Does Firefox have problems in combination with SP1? How to solve this? Thanks.Followed the given advice: installed SP1 again, ran Firefox in safemode, disabled other running programs as mutorrent, still Firefox didnt work. I had internetconnection (after restarting mutorrent this did work, the app telling me what the weather outside is worked) but no Firefox: as previous time I got the start screen, but could not browse the internet.
I also tried to start the Internet Explorer and it also looked as if that application had problems (but that can also be because I did not use it for a while - old version or whatever - and it is not my standard browser).
Have again performed a roll back in order to remove SP1, now Firefox works again.
If somebody has advice it would be very welcome! -
How to roll back to the good last vershion where plugins work
how to roll back to the good last vershion that all plugins work ok
as 4.0 freezes with some sites.You can install previous version of Firefox from [http://www.mozilla.com/en-US/firefox/all-older.html here].
<BR>For installation instructions, see this article: [[Installing a previous version of Firefox]]. -
Apple company . Most of iPhone 4g phone users complain about the OS7. Set as a survey of users of iPhones 4g to roll back the OS 6.1.3. Apparatus doesn't work as has to work. Constant lags am feeling it is not iPhone. It is Android or is worse than the Chinese phone.
Apparatus doesn't work as has to work.Constant lags am feeling it is not iPhone.It is Android or is worse than the Chinese phone. Phone simply brakes... to it чото doesn't suffice
-
Roll back client to 0.8.5. until the new update actually works!!!
My idea is that Spotify roll back their client to 0.8.5. and withdraw the "horrible update" 0.8.8. until it is fully tested and working.
I agree here. It's incredible how many customers are unhappy with this buggy new update, and that the devs would even bother making so many unwanted changes in the first place. I'll give them credit for fixing the "keep playing tracks after an album has ended" issue in the past few days. Does anyone know of an idea for reverting to the non-web-based format that 0.8.5 had? I'm surprised to be unable to find it by searching under "ideas," because it's made things about ten times slower than they were when Spotify ran more like an offline app without having to constantly load every page. I have a fairly new computer and am using FiOS, and it's still unacceptably slow. Streaming is for convenience, and a web-based interface takes away much of that convenience. Does anyone actually prefer the new web-based app design? I can't imagine why, and it really boggles the mind that the devs won't just leave well enough alone instead of making things needlessly laggy. Anyway, if anyone can direct me to a thread asking for the non-web-based format to return, please link me to it. I'd be very grateful.
-
Commit work and roll back with simple language and simple example
hi guru
commit work and roll back with simple language and simple exampleHi,
The statement COMMIT WORK completes the current SAP LUW and opens a new one, storing all change requests for the current SAP LUW in the process. In this case, COMMIT WORK performs the following actions:
It executes all subroutines registered using PERFORM ON COMMIT.
The sequence is based on the order of registration or according to the priority specified using the LEVEL addition. Execution of the following statements is not permitted in a subroutine of this type:
PERFORM ... ON COMMIT|ROLLBACK
COMMIT WORK
ROLLBACK WORK
The statement CALL FUNCTION ... IN UPDATE TASK can be executed.
ROLL BACK:
The statement ROLLBACK WORK closes the current SAP-LUW and opens a new one. In doing so, all change requests of the current SAP-LUW are canceled. To do this, ROLLBACK WORK carries out the following actions:
1) Executes all subprograms registered with PERFORM ON ROLLBACK.
2) Deletes all subprograms registered with PERFORM ON COMMIT.
3) Raises an internal exception in the Object Services that makes sure that the attributes of persistent objects are initialised.
4) Deletes all update function modules registered with CALL FUNCTION ...IN UPDATE TASK from the VBLOG database table and deletes all transactional remote Function Calls registered with CALL FUNCTION ... IN BACKGROUND TASK from database tables ARFCSSTATE and ARFCSDATA.
5) Removal of all SAP locks set in the current program in which the formal parameter _SCOPE of the lock function module was set to the value 2.
6) Triggers a database rollback, which also ends the current database-LUW. -
Hii All how to roll back from CALL TRANSACTION?
or is there any BAPI for source list maintain for ME01 other than BAPI_SOURCEDETERMIN_GETSOS.
so that i can roll back ME01 updation.?hi..
you can use
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'
IMPORTING
return = i_return1. -
The User is doing below steps:
1) Creating one table with the table name as Temp.
2) Creating table as ABC.
3) Inserting 10 rows in the Temp table.
4) selectin * from Temp
5) Deleting 5 rows from Temp table
6) Rollback.
Will it rollback all of the steps done i.e from 1-6.
Or will it roll back only the 6th Step.
Please help me getting solution as i am unable to undersand it.
As per me only the last step should be rolledback.Let's make it clear...
DML = Data Manipulation Language
This consists of INSERT, UPDATE and DELETE. Also SELECT gets put into this category even though it is not really manipulating the data on the database.
DDL = Data Definition Language
Essentially, any database defining statement that is not DML.
DDL statements automatically issue a "commit" before and after they execute.
Transactions on a database are defined as what occurs between one commit and another.
A Rollback statement will roll back any statements in the current transaction.
Therefore if you issue DDL statements you are causing a commit to occur on the database so any subsequent rollback statement will only roll back to the point of the last commit (i.e. just after the last DDL statement or after the last explicit commit)
1. create table .... <--- DDL (implicit) commit
2. create table .... <--- DDL (implicit) commit
3. insert into .... <--- DML (first statement in transaction)
4. select .... <--- DML (second statement in transaction)
5. delete from .... <--- DML (third statement in transaction)
6. Rollback <--- Rolls back the transaction i.e. everything back to 3 -
Apple Mobile Device Service installation rolls back
Hey there,
I've been having problems installing iTunes 9 or even 8 on my computer. While running the iTunes setup, part of the installation rolls back and when I launch iTunes after that, I get the message saying that
"This iPod cannot be used because the required software is not installed. Run iTunes installer to remove iTunes, then install iTunes again."
However, the installation doesn't work no matter how many times i reinstall it. I've fully uninstalled everything related to apple and used the microsoft's utility to check if they were properly uninstalled before reinstalling itunes, but I still got the same message.
I found out that Apple Mobile Device Service was not installed and that was the problem. When i extracted AppleMobileDeviceService.msi from the iTunes installer and ran it, it rolled back too. So I used the /l*v command to create an installation log and this is the error.
DIFXAPP: INFO: opening HKEY_USERS 'S-1-5-21-4128058654-1677487342-2165978628-1007\Software\Microsoft\Windows\Curr entVersion\DIFxApp\Components\{9AA3828A-F852-11DB-8E29-6C6B55D89593}' (User's SID: 'S-1-5-21-4128058654-1677487342-2165978628-1007') ...
DIFXAPP: INFO: ENTER: DriverPackageInstallW
DIFXAPP: INFO: usbaapl.inf: checking signature with catalog 'C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers\USBAAPL.CAT' ...
DIFXAPP: INFO: Driver package 'usbaapl.inf' is WHQL signed.
DIFXAPP: ERROR: Create Driver Store entry failed. (Error code 0x6E: The system cannot open the device or file specified.)
DIFXAPP: INFO: Successfully removed '{9AA3828A-F852-11DB-8E29-6C6B55D89593}' from reference list of driver store entry ''
DIFXAPP: INFO: RETURN: DriverPackageInstallW (0x52)
DIFXAPP: ERROR encountered while installing driver package C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers\usbaapl.inf
DIFXAPP: InstallDriverPackages failed with error 0x52
DIFXAPP: RETURN: InstallDriverPackages() 82 (0x52)
Action ended 17:15:17: InstallFinalize. Return value 3.
Can anyone help me please? Any help will be appreciated =P
CheersI have recently been fighting my system to get itunes to recognise my iphone and i ran into a similar problem.
I couldnt uninstall the old version of apple mobile device support, and installing the new itunes over the top did not seem to help either.
But i found a work around.
Try opening the itunes.exe install package with winrar. (www.winrar.com, its a free program) and then extracting only the applemobiledevicesupport.exe file.
Reboot your system, run that file and then reboot again.
It should work.
If it doesnt, then good luck to you :P
-Adam -
I am unhappy with the recent upgrade to Thunderbird 31.3.0 and now 31.4.0. My bottom line question is whether I can roll back to the previous version, which was working well for me.
The problems I have encountered include:
1. I used to be able to enter a single letter in many cases in the address field, and the autocomplete would fill in the entry that I always use with that single letter. That function has been lost, as has auto fill-in based on the nicknames I have entered in my Address Book. I see there is another thread on this problem (https://support.mozilla.org/en-US/questions/1036962), but no satisfactory answer so far. Entering a single letter now pulls up completely unrelated address entries that may not even have that letter as part of the name, address or nickname for that unrelated address. I have created new nicknames to try to adapt to this problem, but even these new nicknames no longer work with the 31.4.0 upgrade yesterday, forcing me to create yet more complex and hard-to-remember nicknames to pull up my frequent addressees. This is all very frustrating to me, as I depend on speed and ease when creating messages.
2. Also, I used to be able to enter a single letter in the address field and then use the mouse to click on the "To:" symbol to the left of the next address line to change the next entry to "Cc:"; doing so would then cause the complete address to fill in in the "To:" address field, and make the next field ready for an entry. That no longer works. If I use that technique, the shortcut that I entered in the first field gets included along with the address (if I'm lucky enough to have the address itself selected now, given the problems I've mentioned above). I now have to press "Enter" in order to get the address in the first field to "take" correctly, and then have to click on the "To:" symbol for the next line as a separate action. Just another inconvenience with the new version.
3. While still on the subject of addresses, personally I see no reason why the address and subject fields should now be colored blue by default rather than appearing as blank, white fields. I far prefer the old look. And I suspect that changing from the blue color to a nice, clean, white field takes time and computer resources that slow things down.
4. The default font (Times in my case) no longer "takes" when replying to or forwarding messages. I've checked Tools/Options/Composition, and Times is still shown as my default font. However, when I start to type (in a reply with the original message quoted or in a forwarded message), the result is "Variable Width". In order to get Times, I need to highlight the block of text after typing, including the lead-in to the quoted message or the header of the forwarded message, and select "Times" when "(mixed)" shows up. This is a big pain; I often forget to do so and end up having to edit the Unsent Message (which I check before sending) as New and correct the font.
5. A minor problem: I rely on the reminder to attach a message which shows up when an "attachment-related" word is entered in the body of the message. It has been a wonderful feature of Thunderbird that has prevented me on many occasions from sending off messages without the attachments. However, in the new versions, even if I have indeed added the attachment, a pop-up comes up on sending the message saying there has been no attachment and asking if I want to add one. It's easy enough to just click "No", but it's yet one more unnecessary and distracting step that this new version is requiring of the user.
I'm really sad to see these various changes/glitches. I love Thunderbird and it bothers me deeply to find myself mired in so many new problems that slow down my work. I would be grateful for any suggestions and advice, and, particularly, for any information as whether I can roll back to the version prior to 31.3.0 that was working well for me.Thank you, Zenos. I tried rolling back to v31.2.0, since I had not encountered problems prior to December. However, that didn't help. So I followed your valuable suggestion to revert to v24.6; that seems to have done the trick.
I would like to mark this problem as "Solved" -- the rollback seems to have worked. However, since my original post was a complex mix of things, before I do that, should I post the individual problem sets that I had noted (address fields/nicknames problems -- numbers 1-3; default font problem -- number 4; attachment reminder problem -- number 5) as separate issues which have not been solved?
Do you know if these various issues are being worked on? I'm glad to have the temporary fix of rolling back to an earlier version, but I'd like to get back on the current update schedule at some point if and when these problems have been corrected.
Thank you again! -
The office I work in uses a very old version of ACT!, an accounting package. This package has a component called SwiftPage, an antiquated email system that enables us to email from the ACT DB. SwiftPage runs via the web browser.
Firefox just did an auto update (that I will have to find out how to turn off) and now SwiftPage won't run as it is not compatible.
Can I "roll-back" my version of Firefox or do I have to uninstall and try to re-install an older version?
HELP!Try loading and using the add-on from this link: https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/
Many add-ons do in fact work if you force them to run. The procedure to roll-back is given in this article: [[installing previous versions of firefox]]
Unfortunately the official Firefox policy is that you downgrade to 3.6 which is supported for a while longer, and not the now unsupported Firefox 4. If after installing and running the ''add-on compatibility reporter'' you still have problems there are ways around the official policy.
I think it is absurd that Firefox 4 may be used by tens of millions of users one day and a few days later those that upgrade to Firefox 5 should be not only told not to use a now unsupported browser, if they need to revert due to problems, but are actually obstructed in attempts to do so. See also [/questions/840397#answer-205154] -
FUNCTION MODULE TO COMMIT & ROLL BACK.
Hi all,
I am working on an interface , in case power interruptions while running file extraction, the program should roll back completely and the the file should be scheduled later.
could any body give suggest me the solution and the function module name .
Regards
SreHi,
for BAPI's to commit use FM BAPI_TRANSACTION_COMMIT
to undo all the changes use FM BAPI_CHARACT_ROLLBACK
Maybe you are looking for
-
Error message "No business partner could be created for vendor ..."
Dear experts, I had made all the customizing settings for BP and CVI vendor/customer - BP integration and synchronization settings before. BP creation from vendor and usage within Real Estate was working with no problems. When i tried to create a new
-
What is the best way to process a dataset of 2000 records...
I have a problem where I get a collection of 2000 records. Using these rows I need to look for matches amongst existing rows in a table. Currently the procedure each row and scans the table for a match. Is there a way I can scan the table once for al
-
I installed PS Elements 10 successfully on a W7 64 bit system. Program run well. Suddenly organizer aborts after showing the pictures. I tried to repair the cataloug file, still same failure. How can make it work again?
-
HT202213 can't find home sharing icon on my imac
I dont have the home sharing icon to connect up apple tv
-
Where do i get the 30pin male ipod or iphone connector
Where do i get the 30pin male ipod or iphone connectors