POS DM ERROR "UNKOWN SALES ITEM TYPE ####"

Hi,
I am gettting an error in POSDM "UNKNOW SALES ITEM TYPE ####". I usnderstand that system can not validate the sales item type. I can see that in drop down where other sales item types are available like SALES-2001, SALES TO EMPLOYEE - 2101, RETURNS-2801,..."
I would like to find out where I can configure SALES ITEM TYPE?
Please Help me out !
Thanks,
Rahim

Hi Rahim,
Go to Tcode posdw/img
then POS inbound processing ->POS Transactions ->Sales Item Type
Here you can define your own sales type(New Entries) and make sure you assign it to the relevant profile type which you are using for your stores.
NOTE : Most of the standard sales item types are available (like 2001,2101,2301,2801etc) with an assignment with standard profile type 0001 and it is copied to the specific profile type,however if you want a new one to be defined you can do so.
Hope it helps
Rgds,
Aram.

Similar Messages

Error in RFx : Item type 'Service' not allowed for this Item

hi , experts,
We use SRM7.0 in Standalone scenario .
i get an error when i transfer SC to RFx :     Line 0001: Item type 'Service' not allowed for this Item .
if someone kindly tell me how to correct this Error.
another question is ,in the Standalone scenario , can we create Service Master with multiple level(hierarchy) use Tcode 'COMMPR01 ' ?
   reagrds
           claud

Hi Claud,
SRM does not support hierarchy in service for operational documents like PO, contract, confirmation and invoice in SRM 7. It does support hierarchy in service only for RFx doucments. You need to activate the hierarchy template for SRM for that.
Thanks and regards,
Ranjan

Error: Enter an Item type

Hi All,
We are on SRM 7.0 and extended classic scenario.
During the transfer of change done in plant maint orders we are facing an error in SLG1 as " Enter an Item type" Please could anyone advise the reason behind it. The users are changing the delivery date in the PR and it is not moving to SRM system and stopping the queue.
Please advise.
Thanks
Manjri

Note 1247922 - Change of External Requirement sends requirement to SOCO
REFER THIS NOTE.
Some Customers do not want to have such functionality, that for every change in the external requirement, the system will send the corresponding shopping cart item to the Sourcing Cockpit.
After applying this note, the corresponding shopping cart item is sent back to the sourcing cockpit, only in case the quantity in the external requitrement is increased.

Sales document type is not defined for(sales org/division/distribution chan

Hi Friends,
I am getting the error that sales document type is not defined for x/y/z(sales organisation/division/distribution channel). while creating sales order.
Any pointers will be rewarded.
Regards

Hi there,
When you define a sales doc type in VOV8, you also should assign that to the sales area SA (sales org / dist channel / division).
Only then you will be log a sales order for a sales area.
Check if you have done it. You will find it in SPRO --> Sales & Distribution --> Sales --> Sales doc header --> Assign sales doc type to SA.
Regards,
Sivanand

Error in sales order when selecting a warranty item in configurator 'Please enter required information - Service Reference Type Code'

Error in sales order when selecting a warranty item in configurator 'Please enter required information - Service Reference Type Code'
Not able to book the sales order because of this issue

Order Management does not support the inclusion of optional service items in a configured Model BOM (see Support article #1296751.1 for more detail). Allowing for such would therefore require customization.
As you've found, there's no modeling restriction that prevents you from creating a Model BOM that includes optional service items, nor is there any problem with creating a Configurator Model for it. And required service items (such as a warranty item that is a required child of an optional BOM component) do not present a problem; they have nothing to do with Configurator, and would never appear as sub-lines in OM. The problem arises in OM, which requires that any service item be "associated" to the item it's "servicing". OM does not automatically make such an association with service sub-lines, even though it might be argued that an association may be inferred by the BOM structure (i.e., OM does not assume that an optional service sub-line is necessarily associated, from a service standpoint, with its BOM parent). OM customization is therefore required in order to hook any service item up to its corresponding product item. Many customers who configure service along with product have implemented such a customization.
(Another gap in such a solution that may be relevant to you is that for an included optional service item requiring recurring billing, Order Management does not create the requisite Service Contract. Customers have likewise developed customizations to address this, as well.)
As this is not specifically a Configurator matter (you could have created your order without using Configurator at all, and you would have experienced the exact same behavior), please do not take my explanation as being either authoritative or comprehensive (I am a Configurator expert, and only knowledgeable enough about Order Management to be dangerous). It would be advisable for you to seek more detailed information/recommendations from the Order Management forum.
Eogan

Error in Rush Order type with BOM item!!

Hello,
I am facing a very strange error while creating a rush Order with BOM item.
System Error:
1. No item category available (Table T184 SO ERLA TAQ).
I except the error. I get next error as
2. Structure explosion for item 000010 is not possible.
After this BOM explodes with only first 2 Sub Items ( Item cat for main item is determind as TAQ and Sub Items as TAE) , where as the complete BOM has 7 Sub items.
I have made the required configs in item cat determination in T184 table for order type SO, as follows.
SO ERLA - TAQ for Main Item of the BOM
SO NORM TAQ TAE for the Sub Item of the BOM
The same item (BOM ) works very well in OR/BV kind of sales order types, by exploding the BOM to full level(i.e all the 7 sub items are determined).
Has any one come across such an issue. Please let me know what could be the solution?
Thanks in adv,
Shripad

Hi,
Thanks,
In vov7 for TAQ Item Cat. the structure scope is maintained as 'A'. And that's the reason for Standard order 'OR' , the BOM is exploding properly.
It is only with Rush Order , the BOM is not exploding correctly.
BR
Shripad

Delete a line item from Sales Doc type RE

Unable to delete a line item from a sales order linked to document type RE. Get a long runtime - no specific error message. Use the 'Stop Transaction' option to end the transaction.
Have done thorough testing and can delete line items linked to all other sales document types in our system.
Researched SPRO to see if there was a line item deletion option that was not created for sales doc type RE - but can find nothing.
On a critical time line here - this was discovered during Hotpak installation testing which is scheduled to move to PRD June 22. Question as to why we have not run across this issue before now?? - I don't think we have had an occasion to delete a returns line item before - but I want to have the option if available.
Any help to resolve this issue would be appreciated.
Regards
Patsy

Thanks for your response.
After creating document type RE, execute VA02 transaction, select line item, select delete line item icon. The system goes into runtime and just stays there. No error message, no abap dump. To escape the transaction, I have to select 'stop transaction'.
I have tested all other document types we use in our system, (including our customized transactions) SO, CR, DR, etc., and the system allows line item deletion.

Printing PO error "Maintain billing plan type in sales document type...

Hi,
I am trying to print SAPscript to pdf using ADOBE_ENTRY_NEU routine and when i try to display output from ME9F, i get an error that says "Maintain billing plan type in sales document type or Item Category"
anyone have any clue why this is happening?

As this is about SAPscript, moved it to ABAP Programming forum

Visual Studio 2012 SharePoint Project Error : The partial project item type does not have a value for this property

Hi,
I am getting this error from visual studio 2012 whenever i try to create the following project types:
- Workflow Custom activity
- Web parts
The error is as mentioned below
"The partial project item type does not have a value for this property"
Due to this the when I add above type of items in my project, they show a red cross icon against them.
Please let me know If have you any solution?

Hi
I had same issue. Below is the solution
Installing
"Visual Studio 2012 Update 3" usually solves this problem. (You can download it through microsoft's official site at
"http://www.microsoft.com/en-in/download/details.aspx?id=39305")
Hansraj Rathva

Suppresing Delivery note prints for certain sales order types/item category

Hi
I need to find a way of suppressing some delivery notes from being printed.
Relating to orders for consignment fill up and consignment issue.
The delivery notes are needed to be printed for 'Consignment fill up order' type, BUT not for Consignment issue - as this is confusing some of the warehouse staff at month end.
All have the same delivery type, the only difference i can see is the item category types are different
Is there a way i can use the sales order type, with customer number as an access sequence for the Output type ?
- Or the Item category type ?
Is it possible to add sales order type or Item category into the FIELD CATALOG :- output for deliveries
Your help would be much appreciated
Cheers
Tony

Hi,
I can suggest you something, but do remember that I've never done such kind of thing till date.
>> Copy LF and create new delivery type
>> Assign this to your consignment doc. types
>> Kindly remove the Header output determination procedure assigned to this new delivery type
>> Then assign output det. procedure at Item level {according to Item category}
>> Then check if will cater to your requirment or not.
Please keep one thing in mind that I am giving you a proposal by thinking in one logical way and I can't confirm the practicality of the proposal.
Hrishi

Sales AR Item Type Invoice Print Layout Design "Sub Total" per Page

Dear Forum Team
We need some advice on how to modify, fomulate(?) [Sub Total] for each page's 'amount' on the Sales AR Item Type Invoice.
Currently the 'sub total amount' on each page is showing Grand Total instead of sub total.
Thanks

Hi,
In you PLD, In repetitive area, you might have linked the fields like Item name, Item Description, and so on. In these fields one of the field will be Total for line items. Am i right?
If it is so, then in repetitive area footer, Create one Formula field and give formula PageSum("Field_025") (in your case)
Ie., Field_201 = PageSum("Field_025")
Field_025 - contains the Line Total of Row items.
I hope this could help you.
Raja.S

"Unknown list item type 'list'" error

Hi Friends,
I am facing a problem while creating a listbox (in inDesign JScript). I have written the following syntax to create the same:
var myDialog1 = app.dialogs.add({name:"Simple Dialog"});
var styleList = new Array("Part Num","Part Title","Chap Num","Chap Title","Chap TOC");
var submenuItems = new Array("Style Formatting","Indents and Spacing","Paragraph Rules","Keep Options","Hyphenations","Nested Styles","Bullets and Numbering");
with(myDialog1){
with(dialogColumns.add()){
with(dialogRows.add()){
with(borderPanels.add()){
with(dialogColumns.add()){
var styles = dropdowns.add({stringList:styleList,selectedIndex:0,minWidth:133});
with(dialogColumns.add()){
var submenu = ListBox.add("list",submenuItems);
myDialog1.show();
But it is showing the following error message:
"Unknown list item type 'list'"
I want to know that what I should write in the parameter list. Please help me in this regard.
Thanks a lot in advance

Hi Adithi,
dialogColumns don't know a child called 'ListBox'.
You can use 'dropdowns' instead as you did in 'var styles = dropdowns.add({stringList:styleList,selectedIndex:0,minWidth:133});':
var submenu = dropdowns.add({stringList:submenuItems, selectedIndex:0});
Martin

Item Type Based on PL/SQL stored proc causing errors

I am getting the following error when I add this item type based on a pl/sql stored proc that generates html based on the stored proc... the stored proc returns find but the other porlets get Error Message in there headers and in the porlet content I get:
Error: The listener returned the following Message: 503 Service Unavailable....
I also get the same error if I click on a link that is generated from my stored proc for the entire page I get the error:
Error: The listener returned the following Message: 503 Service Unavailable
and get nothing else returned...

Greetings
I suggest you take a look at the following page and have a look on how to create portlets. Since the PL/SQL PDK allows you to create your own portlets inside the Oracle Database there should be no problem for creating the content inside a portlet the way you want it.
http://www.oracle.com/technology/products/ias/portal/pdk.html
Best regards
Johan

Assign partner determination procedure to Item Category/Sales document type

Hello All,
How can I assign a partner determination procedure to an item category or sales document type? That field is disabled in item category config step. Please suggest.
Thanks,
lavanya

HI Lavanya,
The partner determination will happen through a different way and not through item category definition.
The path would be
S&D->MAster Data->Bussiness partners->customers->Customer hierarchy->set partner determination for hirearchy categories.
In this you will have one option to define by item category.
Hope this helps.
Abhishek

Item Type and Service Type in Sales Order

Hi All,
How do i enter Item Type and Service Type in single sales order..?
Any suggestion please...

Hi
If you select the Item type you have choose the list of Items else it is service type you can give service description and choose belongs to G/L Acc.
Or You can create a service as a Item with Item group as Service.
Hope it helps you.
By
Kalai

POS DM ERROR "UNKOWN SALES ITEM TYPE ####"

Similar Messages

Maybe you are looking for