POS DM WPUUMS IDOC - Change to Sales Aggregation

We are using the standard SAP WPUUMS IDOC with sales Aggregation by ItemID and Qualifier with Details. This creates the E1WPU01 segment with a Date and Currency. Next, segment E1WPU02 has the individual article data. E1WPU02 has children E1WPU03 for Discounts and E1WPU05 for Taxes. We are being asked to change the aggregation so that all articles are aggregated by a Delivery Number. My guess is that we would need to add this Delivery Number to the E1WPU01 segment of the WPUUMS IDOC. Every time a Delivery Number changed, a new IDOC would be created and all the articles would be aggregated under that Delivery Number. Has anybody already done something similar to this? Does this make sense? What is the best way to accomplish this? Pros and Cons? Could this be accomplished by creating an E1WXX01 extension off of the E1WPU01 segment? Any ideas or suggestions would be greatly appreciated. Thanks!

Q: This iDoc you're using is for POST information from POS to PDM??? or from PDM to ECC?
We have implemented recently PDM.... and for POS to PDM we used the IDOC:
"/POSDW/POSTR_CREATEMULTIPLE./POSDW/POSTR_CREATEMULTIPLE01"
Regards!

Similar Messages

WPUUMS IDOC Posting error

HI,
When i am sending aggregated sales data to wpuums idoc, it is giving error ...Document 90000007 saved (error in account determination) (MATNR Unknown)
When i cheked with VF02, its say doucment does not exit.
Please provide some solutions.
Regards
Laxmi Bhushan

Hi
Check the status of IDOC in WE02 or WE05 .From status records you can identify the exact issue.
If error is matnr is unknown then that means either material is not in correct format or not extended to correct sales area.
Regards
Mandar

PO to SO IDoc change (ORDCHG) - Extra condition pricing line generated. Why?

Hi guys,
My ECC6 system currently has an IDoc automation setup where creation/change of Purch Order will also trigger creation/change of Sales Order.
By default, condition pricing type will be PB00 or PBXX. I have implemented some code in EXIT_SAPLVEDB_001 to modify PBXX to ZP10.
This is done by modifying KSCHL in condition table DXKOMV in idoc segment E1EDP05.
What i want to achieve is when any current value is changed in the PO for PBXX, this new value should also reflect in ZP10 in the corresponding SO.
This is the problem i am currently facing:
1. First time change PBXX value in PO, ZP10 value in SO is changed correctly.
2. Second time changing the same PBXX line item value in the same PO, a brand new ZP10 line is generated in SO with the new value. The existing ZP10 line remains with old value and becomes inactive.
Is this normal behaviour? How do i ensure that a new ZP10 line does not get generated in the SO but is only being updated when there is an update in the PO?
Please help. Any input would be greatly appreciated.
Thanks in advance!

Hi Vioth,
Did you got solution for thsi i am also facing the same problem.If you konw the solution kindly suggest the solution for this
Thanks in Adavce,
Regards...............Kishore

Can we create two POs for the same 3rd party Sales Order?

Hi MM experts,
Issue: Can we create two POs for the same 3rd party Sales Order
In Third party purchase process, first sales order created with a spl. item category and it creates the PR automatically with the Sales order material and Qty and this PR converted PO.
They got a pur.req. for sale order on same item for same delevery date. They did not get any warning msg. saying that a PO was prviously placed against this sale order.
How it is possible that we were able to place another PO? concern is that second PO was palced against SO which was already used & completed. they were able to place 2 POs for the same customer same delevery date. How it is possible?
If anyone face the same issue, please let me know if you have any answer to this questions.
Thanks in advance.
Suresh.

Suresh,
It is hard for me to give you a definitive answer since you have created a customized solution.
How it is possible that we were able to place another PO? concern is that second PO was palced against SO which was already used & completed. they were able to place 2 POs for the same customer same delevery date. How it is possible?
Normally, the system will not do this. A third party PR or PO will be 'account assigned' to the Sales order. SAP standard 3rd party will not create additional purchase reqs unless there has been manual intervention. Try searching for changes in the Sales order and changes in the original purchase order. They may give you a clue.
I believe the normal Item category for third party SO is TAS (I am working from memory here, I am not in front of a system). I don't know what ZTAG does. I confess I am not an SD expert. You might also want to post your question in an SD forum.
You mention two custom applications, ZMMPLAN and ZSTPMP. These somehow have functionality that is used to help you convert your PRs to POs. If I were in your position, I believe I would also look at these applications for clues to how they might be contributing to your problem. And please don't send me details about these apps. I will not comment on custom code in this forum.
Sorry I can't be of more help.
Rgds,
DB49

Trigger an Idoc when a sale order is been opened in VA02 & saved

Hi Experts
     I have a requirement to trigger an Idoc when a sale order is been opened in VA02 transaction and saved.
Now that I have attained the same through Message Control Settings and Nace out put type settings with Multiple Issuing.
Here in the Idoc will be triggered when the user makes any changes in the order based on the NAST table entry.
Now my requirement is that the Idoc has to be processed even if there is no changes made to the document when the user opens the sale order and clicks save.
This is the process been carried out to re-process the Idoc.
Now that the Idoc is triggered using the path ---> menu - extras -output - header- edit & save.
Now that the user need to process the Idoc by just opening the order in VA02 and click save.
How can this be attained ? is there any configuration for it ?
Or is it possible to handle the same in any of the user exit ?
the problem is the user exit save gets triggered only when there is any change in the document else it throws a msg " No changes made"

Hi Niraj
   Thanks for your Response.
Now that the output control works fine when there is any change made to the document.
Now that i need to configure such a way that the output control triggers even if there is no change to the document and save   button is clicked.
Can U please elaborate how do i make settings in VOFM-> Output Control ?
Thanks
Sathish

Restrict manual change in sales order with respect to quotation

Hi All,
The user use to create sales order with respect to quotation. The user can able to change pricing as well as some header and item fields. How can I restrict user for manual change in sales order expect some specific fields.
Thanks.

Hi Sunil,
It is possible through configuration better you can post in sd forums.
For the condition type settings , ensure that the manual entries is 'D'. it wont allow any changes in the order.
Regards,
Madhu.
Edited by: madhurao123 on Aug 1, 2011 1:08 PM

Changing Customers Sales Account

Hi All,
All the customers are mapped to Sales Account 51005000.
Now the requirement is to change the sales account from 51005000 to 53005000 only for few customers. Please suggest how to handle this issue.
Thanks
Rajanikanth

Hi Srikanth.
Its not the recon account on the Customer master.
This Sales accounts are in VKOA config settings.
Thanks
Rajanikanth

Interdependent Changes in Sales Orders (CRM -- R/3)

Dear Sap gurus,
at my current customer they have implemented warranty complaints in SAP CRM.
This is a copy of the transaction type CRMC (service complaint)- Type leading transaction category = BUS2000120 (complaints).
Once the complaint has user status 'closed' this complaint is sent to R/3 for further processing.
At that moment no changes made in R/3 are replicated back to CRM.
Note 642944 explains that ou can make changes independent of the system in which you originally created the order. This is called scenario A (compared to scenarios X , Y and Z which are described in oss note 705200 (which are valid for older releases of CRM and R/3). Since we are using CRM 5.0 and R/3 (release 4.7 and one is SAP ECC 6.0) we fall into validity for scenario A.
You still have a bunch of other related OSS notes such as:
- 630778: Scenario A: mutual change of sales documents
- 620139: Scenario A: independent changes in sales documents- R/3
- 720511: FAQ: Data exchange sales documents (CRM <-> R/3) II
- 656224: FAQ: Sales documents data exchange (CRM>-> R/3)
- 642269: Scenario A: mutual change of sales documents - CRM
- 971782: New Badi for exchanging data from sales document lists
- 541113: Data exchange scenario for orders (CRM-R/3)
-490932: Data exchange of sales transactions between CRM & R/3
My question is the following:
Since they speak about sales orders/Sales documents etc all the time, I am wondering if all these notes also would apply in the case of CRM Complaints (CRMC with leading transaction category COMPLAINTS).
I would like to avoid investigating every single note, if in any case these would not apply to Complaints.
(Just for the record: the reason why I ask is that for example Product proposal (in the cross selling context) is for example also not supported for Complaints in SAP CRM 5.0, as opposed to Sales orders and Quotations.)
Thanks for a quick answer for those that already have had experience.
davy

To start with I have to describe the actual scenario...(therefore I think Interdependent changes is not valid as Lorna explained already).
Scenario:
We are using Complaint management in CRM 5.0. combined with SAP ECC 6.0.
Now we are not following the standard process flow which is described in:
http://help.sap.com/saphelp_crm50/helpdata/en/ed/8816f949e90644ada2c210ba2316e0/content.htm
When Creating a Complaint (CRMC) and adding a unit (individual object/material) at header level, and the spare parts (on item level) we do certain validation checks
for warranty validity etc.
On item level we can set the status on either "Accepted" or "rejected"(where we also indicate per item based on code groups if this should be
- credit memo request
- free of charge substitute delivery
After all item statuses are either Accepted or rejected, the user status on header level automatically changes to 'immediate settlement'.
When this is the case we can manually set the user status to closed on header level.
At this very moment replication takes place in the form that a Sales Order is created in R/3 with either a credit memo request and/or
a Free of charge delivery. (these have the same item category as in SAP CRM).
so far so good. But in this stage no manual changes are possible anymore in the SAP CRM complaint.
Changes can still be made on Sales order level in R/3 by adding for example another item (spare part).
My Question now is:
Suppose a change is made on sales order level (this sales order has the same number as the complain which was originally created in SAP CRM), how can we
update the Complaint in SAP CRM?
I first was looking at delta replication for sales documents (described in notes 642944 and 705200) but this is not valid since the actual complaint is not
replicated to R/3 in the first place.
The only thing I could think of is making use of some action (profile)...which might for example check if the R/3 sales order with same document number is changed.
Anyone experience with setting up such a thing or perhaps has another suggestion?
Thanks in advance
davy

Report on changes to sales orders

Hi Experts,
I am looking for a way to report on changes to sales orders, specifically the row shipping date and quantity.
I can see that the data is apparently in tables ADOC and ADO1 but am having trouble getting useful results. What I need is a report that, for sales orders only and for a date range, shows all changes to row quantities or row shipping dates. The type of output that would be useful is:
Change date - document # - row# - Item code - old shipping date - new shipping date - old qty - new qty
filtered on change date for sales orders only. This seems beyond my preferred option of XL-Reporter and I'm getting lost in the history tables in creating a query.
Best Regards
Matthew

Hi,
Without doing the query for you, history tables are linked as the "normal" table but with the addition of the LogInstance column. Then the UpdateDate column (from base table ie. ADOC) will tell you when it was changed.
Your query isn't an easy one... SInce you have to link an instance (ie. LogInstance = 1, which will be the original created object) to all the modified ones.
Regards,
Eric

All changes in sales orders with in a week

Hi gurus,
I want to display a report to display all the changes in sales orders with in a week,
Can anybody help me .If anybody already developed this report can you send to me.
regards,
D..

Query table CDHDR and CDPOS with the following fields:
CDHDR-TCODE = VA01 or VA02
CDHDR-UDATE = <specified date range>
Now select from CDPOS where
CDPOS-OBJECTCLAS = CDHDR-OBJECTCLAS
CDPOS-OBJECTID = CDHDR-OBJECTID
CDPOS-CHANGENR = CDHDR-CHANGENR
The rest of the details for the change can be found from the other fields in CDPOS. like tablename, fieldname, old value, new value etc.
Hope this helps.
Sudha

How to restrict the user from making any changes in Sales order- item level

Hi to all
How to restrict the users from making any changes in sales order at item level if the same sales order is released by senior user through status profile.
Regards
Anish Parikh
Edited by: anish parikh on Jan 24, 2008 5:16 AM

Hi Anish,
This can be achieved through the roles and authorization.
This can be done through the basis team. they can create user profiles and roles.
For the roles they assign some transaction codes so that they can view the only assigned tr. codes.
Like that ur requirement can be done.
Also u can prevent the user to change any fields in the sales order screen (VA02). for that please modify the authorisations.
Hope i answers.
Reward points if useful.
Edited by: kaleeswaran bhoopathy on Jan 24, 2008 9:57 AM

How to restrict header text changes in sales order level

Dear Experts,
how to restrict header text changes in sales order level change mode
thanks

Hello Chandu,
how to restrict header text changes in sales order level change mode
In order to restrict changes to Sales Order Header Text, the appropriate User Exit would be USEREXIT_MOVE_FIELD_TO_TVCOM_H. With the help of ABAPer, you can include the simple logic on the basis of Header Text type such that whenever any changes are incurred on the Sales Order header text, updates would be prevented.
Please try out this approach and let us know your latest observation on this issue.
Regards,
Sarthak

Find the user exit while creation and change of sales order

Hi Team
Below mentioned requirement , in which user exit i have to put below logic while creaion and change of sales order?
u2022     The logic for the user exit to explode should consider the following assumptions and validations
o     Customer master to have the entry at KNVV-KVGR1
o     Material master to have the entry at MVKE
o     UoM in the Sales order item (VBAP- VRKME) should be = Pallets PAL or tonnes (TES)
o     Should have more than one line item or number of line items with UoM PAL or tonnes TES should be > 1
for example :-->
Product A with Scales mentioned below
Product A     Quantity / Scale     UoM     Price(£)
     0-10     PAL/TES     20
     11- 20     PAL/TES     10
     21- 30     PAL/TES     5
     31-40     PAL/TES     2.5
     >41     PAL/TES
Product B with Scales mentioned below
Product B     Quantity / Scale     UoM     Price(£)
     0-15     PAL/TES     25
     16-20     PAL/TES     20
     21- 30     PAL/TES     15
     31-40     PAL/TES     10
     > 41     PAL/TES     5
u2022     Product A (qty 10PAL) + Product B (qty 15 pal) ordered in a single order with 2 line items.
u2022     The expected results should be
o     Product A qty 10 + B qty 15 added = 25Pal
o     The system user exit should add the total number of pallets on the order line items and point towards the respective scales, so in this example prices against each line item should be the respective price against 25 Pal = 5£ for product A per pal and £15 for product B.
Thanks in Advance.
Puneet.

Hi Team
Below mentioned requirement , in which user exit i have to put below logic while creaion and change of sales order?
u2022 The logic for the user exit to explode should consider the following assumptions and validations
o Customer master to have the entry at KNVV-KVGR1
o Material master to have the entry at MVKE
o UoM in the Sales order item (VBAP- VRKME) should be = Pallets PAL or tonnes (TES)
o Should have more than one line item or number of line items with UoM PAL or tonnes TES should be > 1
for example :-->
Product A with Scales mentioned below
Product A Quantity / Scale UoM Price(£)
0-10 PAL/TES 20
11- 20 PAL/TES 10
21- 30 PAL/TES 5
31-40 PAL/TES 2.5
>41 PAL/TES
Product B with Scales mentioned below
Product B Quantity / Scale UoM Price(£)
0-15 PAL/TES 25
16-20 PAL/TES 20
21- 30 PAL/TES 15
31-40 PAL/TES 10
41 PAL/TES 5
u2022 Product A (qty 10PAL) + Product B (qty 15 pal) ordered in a single order with 2 line items.
u2022 The expected results should be
o Product A qty 10 + B qty 15 added = 25Pal
o The system user exit should add the total number of pallets on the order line items and point towards the respective scales, so in this example prices against each line item should be the respective price against 25 Pal = 5£ for product A per pal and £15 for product B.
Thanks in Advance.
Puneet.

How to trigger workflow from changes in Sales Order in CRM?

Hi Experts,
I want to trigger event at the time of saving the changes in sales order (TCODE- CRMD_ORDER).
I have found one BO - BUS2000115 but it is getting triggered only after new creation of sales order.And there is no BO available when we change the sales order.For this reason I have created one customize event in BO(BUS2000115).
Now my question is How should I link this customize event so that it will trigger after saving the changes ?
I have seen SWEC transaction but was not able to find anything to link this customize event.
Please help ....!!!
Good response will be rewarded.
Thanks
Snehasish Das
Edited by: Snehasish Das on Feb 14, 2008 2:31 PM

In SWEC, actually you link the change document object to a Business object and its corresponding event , to which workflow should react to.
If yo udo not find the entry then, yo unedd to create one with finding out the respective chage documnet object.
Hope that helps.
Regds,
Akshay

!!!How to restrict user for making changes in Sales order , partner level

Hi all,
Can anybody tell me how to restrict user for making changes in Sales order at partner level, is it through user exit?

Hi Ruchi
I hope u had gone to the screen fields which u want them not to be editable. So there u select all the fields contents which u do not want to to be changed and check the boxes with W.content and Display and save it. Once evrything is done u have to activate the particular transcation going in to the standard variants and put the name and click the activate button.
Hope its clear
Reward if help ful
Sri

POS DM WPUUMS IDOC - Change to Sales Aggregation

Similar Messages

Maybe you are looking for