POs terms and condition in multiple languages

how to print a PO's terms and conditions in multiple languages ??

Hi,
You can print in many language.
Try to maintain different message type for different languages or develop a routine with a logic based on the language maintained for the message type, the PO form will be printed.
Thanks & Regards,
Kiran

Similar Messages

Print multiple pages of text module as Terms and Conditions at end of PO

Hello,
I have a text module that contains a two page terms and conditions to print as the last pages of a PO.
I have three pages
FIRST-->Calls NEXT
NEXT--> Calls NEXT with a command to LAST in the MAIN window
LAST-->Calls Last, has a MAIN Window and a regular window which calls text module
The text module only prints on the first page in the end of the PO(i.e.last page). It does not flow or create an additional page for the left over text in the text module.
Please advice.

Hi,
We have same situation. What I did was to introduce a new element in MAIN WINDOW ( by the way only FIRST & LAST pages are sufficient, no need to have additional page for printing Terms & Conditions ) in that element just have 2 lines viz.:
/: NEW-PAGE * Above command so that terms & conditions will always start from a new page.
/: INCLUDE ZPO_TERMS_AND_CONDITIONS OBJECT TEXT ID ST LANGUAGE EN
If terms & conditions are more than a page it will automatically be printed on the next page. ( In our case currently we have got 5 pages of terms & conditions ).
At the end of the program i.e. When you are finished with printing of a PO just 'WRITE' this element using WRITE_FORM.
I hope this helps,
Regards
Raju Chitale

I have agreed and accepted the terms and conditions multiple times

I have agreed and accepted the terms and conditions multiple times and I am still being asked to accept. All I want to do is watch the new episode of Glee and I am highly considering doing so illegally or getting a ******* hulu-plus account because iTunes for some reason does not want me to purchase anything. I have been playing along in this treacherous cycle for a ******* half-hour. How do I make this stop?

Hello ms450,
I would report an issue with the purchase directly to the iTunes Store support with this article:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/ht1933
Cheers,
Sterling

I'm trying to download an app on my iPhone, however I'm being told that the terms and conditions have changed and i must look at them before i can download. I've gone through the terms and conditions multiple times and i can't find an 'accept' option?

I'm trying to download an app on my iPhone, however I'm being told that the terms and conditions have changed and i must look at them before i can download. I've gone through the terms and conditions multiple times and i can't find an 'accept' option?

Hello jody5758
Continue your troubleshooting with the article below. IT will walk you through checking the Date & Time as well as checking the settings of your router to ensure a proper connection.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Regards,
-Norm G.

Terms and Conditions change on 10/15/2014 negatively affecting people with multiple Apple IDs

I have two Apple IDs and purchased songs and videos through iTunes using both IDs. Apparently, Apple has changed the Terms and Conditions for iTunes presumably at 12:01am on 10/15/2014. The most notable change affecting me is related to people with more than one Apple ID. I downloaded some songs on 10/14/2014 from the iCloud to my MacBook Pro which had been purchased a long time ago with my first Apple ID. Early the morning of 10/15/2014, I tried to download songs and videos from the cloud to my MacBook Pro this time using a different Apple ID. When I clicked on the cloud icon by the song or video in iTunes for Mac, I received a pop up message in iTunes stating that I can download past purchases on this computer with just one Apple ID every 90 days. It continues by saying that my computer can be used to download past purchases with a different Apple ID that user cannot download purchases made using a different Apple ID in 90 days.
I have a real problem with this change in Terms and Conditions because Apple is telling me that I'm not allowed to have access to purchases I made until 90 days have passed. These purchases were made prior to Apple's most recent change made to their Terms and Conditions, so they have retroactively restricted my use of media that I purchased legitimately. I've posted on the support page because I would like to have Apple respond to my post and explain their rationale behind making this change. Apple? the floor is yours.

Ed. Thanks for your response. I made the assumption that the 90 day restriction had just been put into place because I was working with Apple support earlier on the 14th and was attempting to download content from my original Apple ID so I could back up everything to my computer and overcome the issue caused by having two Apple IDs. During the support call, I was able to log in to iTunes and download previous purchases from the cloud for both of my Apple IDs. When I attempted to do so early this morning, I received the message described above when I logged in to my primary Apple ID and attempted to download the songs I ran out of time to download while on the phone with Apple support. Thanks for the clarification about the policy.
The goal of the Apple support person was to overcome the problem of having two Apple IDs. It would be terrific if Apple came up with a solution for this problem as they have customers like me that would very much like to consolidate all of their purchases under one Apple ID. Restricting access to legitimate purchases for 90 days is a pretty terrible policy to inflict on people that have paid for the use of these songs and videos.
I have to give you a hard time about part of your answer (in good fun). Your answer could be summarized as saying "The best solution to your problem is not to have your problem in the first place." What it means is that the problem is a legitimate problem that doesn't have a good solution.

Terms and conditions for materials

How do the Terms & Conditions appear in SAP.MM when a materials order gets cut?
Can SAP handle multiple legal Terms & Conditions?
One set of Terms & Conditions for materials orders and another set for service orders??

We had implemented a similar requirement at a client.
The solution is as follows:
Have separate document types for Materials and Service POs.
Create separate standard texts (tcode SO10) for the legal terms and conditions for materials and service POs. Use them while printing.
In our case, we had separate legal terms and conditions based on material or services, the company code, etc. We had standard texts for all these and controlled it in SAP script (Version 4.6C).
Hope this helps,
Lakshman

All in one terms and conditions problem

Hello XMLP/BI Gurus,
I have a requirement where "Multiple POs" should get printed and Every PO (and not all pages in the PO) should have "Terms and Conditions" printed on its last page.
Note that, Terms and Conditions need to be printed only on the last page of the PO in "duplex" mode. i.e immediately at the back side.
All other Pages in the PO should be printed saperately.
i.e.
<PAGE1 - PO1>
<BLANK PAGE>
<PAGE2 - PO1>
<BLANK PAGE>
<PAGE3 or last page- PO1>
<Terms and Conditions**>
--------------- NEXT PO ------------------
<PAGE1 - PO2>
<BLANK PAGE>
<PAGE2 - PO2>
<BLANK PAGE>
<PAGE3 - PO2>
<BLANK PAGE>
<PAGE4 or last page - PO2>
<Terms and Conditions**>
VIMP NOTE: Also please note that each page in the PO have Page X of Y in its header and it should display the physical page count i.e. it should skip the count for "blank page" and the "terms and Conditions**" page.
we have acheived evrything except the Terms and Conditions on the last page.
Using the "Different Odd and Even Page" functionality
and
"<?section:force-page-count;'end-on-even-layout'?><?section:xdofo:blank-on;'even-skip-page-count'?>"
commands given in the Tims blog I am able to get atleast the following output.
--- OUTPUT WE HAVE REACHED IS --
<PAGE1- PO1>
<BLANK PAGE>
<PAGE2 - PO1>
<BLANK PAGE>
<PAGE3 or last page- PO1>
<BLANK PAGE> (SHOULD BE Terms and Condn.. but NOT YET ... :( )
We are inserting a blank page and have set the printer to print in "Duplex" mode so that we get the "terms and conditions" at the back of the last page.
Please help me to get the terms and conditions printed on the last page.
Let me know if you need further clarification.
Thanks and Regards,
- E
Message was edited by:
- E
user553401
Message was edited by:
user553401

please help me if you can.... is there any way to implement alternate blank pages and different last page at the same time in XML/BI Publisher.

How to print the Terms and Condition page ine the sap-script

Hi experts,
                         i got the requirement that how to print the Terms and condition page in the script,i have the three pages, having the same main window, in the last of the main window(all three pages) i have called the hard coded text(i.e so10 text), but when i am displaying the output data get printed in the first page but i am getting the second page heading on the top of the terms and condiions page. In all the three pages i have the same main window, if i make change in any window i will affect all the other main windows. so please suggest me how i need to go.HOW TO GET GRID OF THE TEXT ON THE TOP OF THE SECOND PAGE OF THE TERMS AND CONDITONS.
like this i have called in the MAIN WINDOW
/E : LAST ( IN ALL THREE PAGES)
       INCLUDE ZSD_INVOICE_TERMS TEXT OBJECT TEXT LANGUAGE EN.
IN THE TCODE SO10
NEW PAGE TERMS.
1) TERM MS AND CONDITONS TEXT.................................................
FIRST->NEXT, NEXT->NEXT,,   TERMS--->TERMS.

Hi,
1. Create a new page by Name : LAST
2. Identify the text element which will be the last element in the form in the debug mode.
Mostly Ex: SUM, TOTAL, LAST etc.,
3. the page linking should be
First --> Next
Next --> Next
4. In the Text element identified in the step 3.
Write the following code
/: NEW PAGE LAST
/: INCLUDE the standard text created for the terms and conditions in SO10
Check the syntax for the command but the logic will be the same.
It should resolve your problem.

How to create Standard text for terms and conditions of po print form

Hi anybody,
I want create Terms and condtions inside smartforms PO FORM , how do i create terms and conditons and how use font size? I don't want hard code inside smartforms , I will create seperate texts for terms and condition after i include inside smartform.
How i will do ? anybody please tell me.
Thanks
S.Muthu.

Hi Subramaniyan,
                         U an create an include text node in your smartform.And terms and conditions is the header level text,so i suppose you have to give the inputs as follows :
Text Name         &**-EBELN&
Text Object       EKKO
Text ID              xxxx
Language          &**-SPRAS&
is the data at your end .To simplify more follow the following.
1> go to your purchase order from me23n
2> open any purchase order and click on the terms and conditions text.
3> go to GOTO option of the text.and click on the HEADER.
4> U will find the attributes of the text which you will have to pass to the Include text in your smartforms.
The long texts arestored in STXH table.
Reward Points if useful.
Cheers,
Deepthee Kasal

How to change the content of GTC (terms and conditions) for Partner

Hi all,
We are using R/3 version of ISA B2B site. while creating order thru Shopping Basket we have requirement that We need to provide GTC (General Terms and Condions) for the Partner (View GTC link ). Right now some default text is displayed in that window (text text text ext text text text text text like that). we need to change this.
where i can change this text and enter our own terms and conditions.
Please help me to resolve this,
thanks in advance
siva kumar

Hi Siva,
the GTC is shown in the JSP b2c/order/terms_and_conditions.jsp. If you have a look at the file, you will find the following code:
<isa:translate key="b2c.order.termsAndConds.txt.dmy"/>
The translate tag will render the language dependant text for the resource key "b2c.order.termsAndConds.txt.dmy". To change the content that is shown you can change the resource text or create your own resource key in the corresponding resource file. The resource files are located in the src-folder of the web application DC.
Best Regards,
Peter Kraus
SAP Web Channel Consultant
http://www.leonardo-it.com

Purchase order terms and conditions in french

Hi,
i want purchase order terms and conditions in print preview to appear in french.I added that graphic and added conditions also.I maintained material and vendor in french language still it is not displaying terms and conditions in french.How tomake this to appear in french?Is it related to MM config or basis issue.?

hi
take help of abaper for this
and if u need print whole po in french then in messages for condition type neu maintain language as french
regards
kunal

Terms and conditions last two pages

Hello all:
I am working on a project that deals multiple pages in form printing. The first page (sheet) I want to print as Simplex the last sheet I want as duplex. So my question is this, I have these as separate forms, do I need to consolidate these into one form with separate pages or can I keep these separate smartforms...
John

Hi,
You can do it in same form.
Create 2 pages.
a. Page 1 should be simplex.
b. page 2 should be duplex.
if you have already create terms and conditions as separate smartform.
1. Go inside smart form(terms and conditions).
2. Copy the page completely ( Ctrl + C )
3. Press back button( dont create new session)
4. give first smartform name and press change.
5. Press Ctrl + V (paste)
Regards
Aromal R

Unable to print all the terms and conditions pages in the PO.

Reqt: The PO includes terms and conditions as the last page.
Currently the program only prints out the first page of the Terms and Conditions regardless if it is one or two pages.
Only one page(image) is displaying in the last page of smartform.
These terms and conditions pages are passing as graphics(images), We are passing the GRAPHICS under the TABLES Main Area in LAST page WINDOW.
But only one page (image) is displaying, but not others.
Can anyone help to solve the above issue.
Regards,
Kishore

you can create your terms n condition texts in SO10(standard text). THEN
If u r using smartform then do this:
goto the general attributes of a text element. From the drop down menu, convert the text type to include text.
The just as in read_text fm pass the parameters
text name, text object, text id and language.
Every thing will be handled automatically
AND if its a sap script then:
To include the contents of another text into the current text, use the INCLUDE control command. SAPscript still treats the text to be included as a separate text. The text is copied over only at the point at which the output is formatted.
Thus the use of the INCLUDE command always ensures that the most current version of a text is included into the output, since the text is not read and inserted until the output is formatted.
Syntax:
/: INCLUDE name OBJECT o ID i LANGUAGE l PARAGRAPH p
NEW-PARAGRAPH np
You must specify the name of the text to be inserted. It can be up to 70 characters long. If the name of the text contains spaces, then you must enclose it in quotes as a literal value. You can, alternatively, specify the name via a symbol. All remaining parameters in the INCLUDE command are optional. If an optional parameter is not specified, then SAPscript uses default values as applicable for the calling environment.
/: INCLUDE MYTEXT
The text MYTEXT is included in the language of the calling text.
/: INCLUDE MYTEXT LANGUAGE 'E' PARAGRAPH 'A1'
The text with the name MYTEXT and the language E is included, regardless of the language of the calling text. The paragraph format A1 will be used as the standard paragraph type for this call.
Optional parameters:
u2022 LANGUAGE
If this parameter is not specified, then the language of the calling text or the form language are used for the text to be included. If the language is specified, then the text will be fetched in this language, regardless of the language of the calling text.
u2022 PARAGRAPH
The text to be included is formatted using the style allocated. The PARAGRAPH parameter can be used to redefine the standard paragraph for this style for the current call. All *-paragraphs in the included text will then be formatted using the paragraph specified here.
u2022 NEW-PARAGRAPH
The first line of the text to be included will be given this format indicator, as long as it is not a comment or command line. If the optional PARAGRAPH parameter (see above) is not specified, then all *-paragraphs of the included text will also be formatted using the paragraph specified in the NEW-PARAGRAPH command.
u2022 OBJECT
In order to completely specify a text, information about the text object is also required. There are a number of restrictions and other rules that depend on the object type of the calling text:
o Any kind of text can be included in a form. If no object is specified, then TEXT will be used (standard texts).
o In the case of a document text (DOKU object), you can include only document texts. This object type is also assumed if no object is specified in this environment.
o Only hypertexts and document texts can be included in a hypertext (DSYS object). If the OBJECT parameter is missing, then DSYS is used as the default value.
o In the other kinds of text you can include only standard texts (TEXT object), document texts or hypertexts. If there is no specification, then the default object is TEXT.
u2022 ID
The text ID is a part of the text key, which permits further text objects within a given object. If no ID is specified, then the default include ID is used from the TTXID table for the calling text. If there is no entry in this table, then the text ID of the calling text is used.
The following consistency check is applied both to the ID and the object:
u2022 All text IDs are allowed in a form.
u2022 In document texts, only document texts may be included that have text IDs TX (general texts) or UO (authorization objects) and also other document texts with the same text ID as the calling document text.
u2022 In DSYS texts, all DSYS texts can be included, whatever ID they have. Document texts to be included must have one of the IDs TX or UO.
u2022 Into the other texts, standard texts with any allowable text ID, DSYS texts with all IDs, and document texts with the IDs TX and UO can be included.
The INCLUDE command returns a status code in the SAPSCRIPT-SUBRC symbol:
u2022 0: the text include was successful.
u2022 1: the command could not be executed because it contained syntax errors.
u2022 2: the rules governing the text to be included were not followed (see above).
This value cannot occur if the command is used in a SAPscript form.
u2022 4: the specified text could not be found.
Once you define the standard text in SO10 you can include text by the above process or use the function module read_text:
.............IN Smartform.......
CALL FUNCTION 'READ_TEXT'
EXPORTING
CLIENT = SY-MANDT
id =
language =
name =
object =
ARCHIVE_HANDLE = 0
LOCAL_CAT = ' '
IMPORTING
HEADER =
tables
lines = i_tab
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
NOT_FOUND = 4
OBJECT = 5
REFERENCE_CHECK = 6
WRONG_ACCESS_TO_ARCHIVE = 7
OTHERS = 8
So you want to know how get the parametrs right. This is how"
In SO10 goto goto menu -> header
here u will find all the required parametrs.
The text lines will be returned in the i_tab.
U can loop at this itab and display the data.
Reward points if hepful.

How do I accept terms and conditions policy? Can't find it in the email

Tried several times

You may want to setup as new
Settings>General>Reset>Erase all content and settings
Erase (Twice)
Enter passcode before you are allowed to erase iPad
See Apple on screen
See Apple and progress bar
See Apple on screen
See Apple and progress bar
Slide to setup (Hello screen)
Select Language
Select Country
Choose Wi-Fi Network
Enter Wi-Fi Password
Activating iPad
(a) Enable Location Service (b) Don't enable Location Service
(a) Set Up as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
(a) Sign-in with Apple ID (b) Skip This Step
Select "Sign-in with Apple ID"
Terms and Conditions
(a) Create a Passcode (b) Don't Add Passcode
Select options
Diagnostic
(a) Automatically Send (b) Don't Send
Select options
Welcome to iPad
Get Started

I have purchased a movie and it has downloaded. Next, I get a screen the says Terms and Conditions. It says to click Agree but I. Can not find Agree anywhere in the document. how do I move forward and access the movie?

I have purchased a movie and downloaded it. Next I get a screen that says Terms and Conditions and tells me to read and click on Agree. I cannot find the Agree anywhere in the document. How do I move on and view the movie?

Go to Settings>General>Usage. How much space does it show you have?
If you connect your phone to your computer, what does iTunes say is on your phone? Do you see a large amount of "Other"? If so, you may have a corrupted database. You'll need to sync your phone then restore it as NEW (not from back up) then re-sync your data).

POs terms and condition in multiple languages

Similar Messages

Maybe you are looking for