Pos1, side up, side down doesn´t work

when activating Extras --> settings --> advanced --> allow marking of text the buttons pos1 page up / down are not activated.
== This happened ==
Every time Firefox opened
== Extras --> settings --> advanced --> allow marking of text

I assume that you mean Caret browsing:
Extras > Einstellungen > Erweitert > Allgemein > Eingabehilfen: "Markieren von Text mit der Tastatur zulassen"
When you have enabled caret browsing the the cursor keys will behave differently.
See:
http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
http://kb.mozillazine.org/Accessibility_features_of_Firefox

Similar Messages

Since last week my date & time have not worked on my 5c. The date & time are constantly wrong. I've shut down, doesn't work. Set it automatically, doesn't work. I don't get texts or calls when it's sleeping. Any suggestions?

Since last week my date & time have not worked on my 5c. The date & time are constantly wrong. I've shut down, doesn't work. Set it automatically, doesn't work. I don't get texts or calls when it's sleeping. Any suggestions?

try a reset.
Hold the home & power buttons down simultaneously until you see the Apple logo appear.
Note: no data will be lost.

I recently bought the 27" IMac. I have to force shut it down, the menu shut down doesn't work, and most of the time it will start back up on it's own several hours or even days later. Any ideas?

I recently bought the 27" IMac. I have to force shut it down, the menu shut down doesn't work, and most of the time it will start back up on it's own several hours or even days later. Any ideas?

Note: No iMac PPC is 27". PPC is for the iMacs that were new until the beginning of 2006. They are all Intel now.
I've requested a moderator move your thread. No action is needed on your part.

Side bar doesn't work

the Slide Bar on my touch ipod is not responding...going to close it down the closing red slide doesn't work also. any help would be appreciated.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
iOS: How to back up your data and set up as a new device
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

ThinkPad Helix - Swipe Down Doesn't Work

The "swipe down from top" gesture doesn't work in any Windows 8 metro/modern app. I can close an app by dragging down with the mouse, but swiping down with my finger on the screen does nothing. Has anyone else experienced or fixed this? Thank you.
Luke
Solved!
Go to Solution.

I downloaded this app which tracks your finger with crosshairs as you move it across the touch screen:
http://apps.microsoft.com/windows/en-us/app/multi-touch-test/f8bf3f19-2b34-4440-a465-06b87c2e9b7e
When I move my finger toward the top of the screen, there's about an inch near the top where it doesn't track my finger at all. This one-inch vertical "dead" zone is consistent from the left side of the screen to the right.
It's frustrating because many touch-enabled metro/modern apps have navigation controls and search fields in this area. Has anyone else experienced this problem?

Mouse scroll-down doesn't work....

LIttle trackball for scrolling on my mouse doesn't work when attempting to scroll down. I've looked at the pref settings for it, and it all seems fine. It will move in all other directions, just not down.
Advice please?

Glad it worked. Folks seem to have varying probs w the scroll wheel. I have been lucky. 1st one lasted 4 months and would not clean. Free replacement. This one is now going on a year w a couple of minor cleans.
*Thanks for the Green Star.* Joyous Computing, JP

Drill down doesn't work in Workbooks

Functionality of Navigation Pane /List of filters in workbooks doesn't work.
Some Insight ( how the workbook was built ) - RRMX - New Worksheet - Select Cells & Insert Buttons ( Change Variables & Refresh ), Navigation Pane, List Of filter, Analysis Grid - All others work excepting the Navigation Pane & List of filters.When I do "drill down " or " select filter value " , the functionality doesn't seem to be working...though the drill down works on Query Result Area ( like on right clicking " Cost Center " - Drill Down Cost Center Down ).
Anything to do with Macros ????
We are on BI 7.0 - SP 13 , has anyone encountered a similar issue ???
Any applicable OSS notes ....
Message was edited by:
Jr Roberto

After opening a workbook did you refresh the sheet/query?
When you open a saved workbook it will not have the OLAP information that is needed for
drilldowns.
Good luck, BB

Hierarchies - Drill Up/Down doesn't work

Hello!
May be I am doing this incorrectly. I've followed Moya Watson's work around ([https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4155b345-0a01-0010-ac9f-b3b2c34e993c|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4155b345-0a01-0010-ac9f-b3b2c34e993c]) to enable drill down/up for hierarchies in VC.
When I run the iView, I see my tree's root expanded with 10 child nodes (all with a '+' infront, meaning they can be expanded). When I click on "Drill Up" when the root is selected, all nodes collapse as expected; "Drill Down" also works by expanding the root node and showing the 10 child nodes. However, this functionality doesn't work for any of the 10 child nodes. When any of the 10 nodes is selected and either "Drill Down" or "Drill Up" is clicked, the table refreshes but there is no change in the table (all nodes remain as they were before).
So, the buttons only work for the top most node. Does anyone know what I could have done incorrectly? When this is run via WAD template, it works as expected.
Thank you for your time,
Kiran
Edited by: Kiran on Feb 7, 2008 2:33 PM

An update.
After some testing, I found that the problem drill up/down are working for only node level 1 <-> 2, was because the part in the web api formula that's related to "Filtering the hierarchy" isn't working.
Here's the code:
'FILTER_NODE_IOBJNM=0COSTCENTER;FILTER_VALUE='&&#ID[ACCCG]@Cost_Center_key&';FILTER_COLLAPSE= ;FILTER_IOBJNM=0COSTCENTER;CMD_1=CMD%3DDRILL_TO_LEVEL%26LEVEL%3D2%26IOBJNM%3D0COSTCENTER%26DATA_PROVIDER%3DDP;'
I started off from scratch and tried to just implement filtering on hierarchies and it doesn't work. I made sure that "Activate Hierarchy" is set on the characteristic for the query.
Any pointers,
Kiran

After updating settings, I have to enter a passcode to unlock phone. The number I wrote down doesn't work

I updated the settings on my Iphone (suggested as possible way to make photo cube work). Now I have to put in a passcode to unlock phone. I only use one passcode but it doesn't work. Where do I look to find the passcode I should enter?

Using three fingers, double-tap the screen.
http://support.apple.com/kb/TS3129

My iPad wont rotate to landscape also in games I can't rotate to steer like in real racing 2 hd, the gyroscope doesn't work also the side switch doesn't work on my iPad so it can go silent

Can someone please help me, I think it's the hardware because when I quit the game the iPad wouldn't rotate to portrait. I tried restarting it but it doesn't, also tried turning it on and off and that didn't work either so I think it's a hardware defect

Is there a lock symbol at the top of the screen next to the battery indicator ? If there is, then depending on what you've got Settings > General > Use Side Switch To set to (rotation lock or mute notifications), then you can lock/unlock the rotation by the switch on the right hand side of the iPad above the volume switch, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

IPhone 5 right side headphone doesn't work

I Guess that is software problem because it wasn't work after I downloaded something ,any way let me know what happen.

The flash is activated as follows:
When you are in camera mode, and the camera is open about to take a photo, you will see an elliptical button in the upper left with a flash-like sign. Press that button and you will find it has three settings: Auto, On, and Off.
Choose one.
I don't know what you mean by "torch".

Navbar portlet - category drop-down doesn't work

Hi all,
I've got a content area CA, in which I have defined a category CAT. In CA I have created a folder F with a text item ITEM to which I have assigned the category CAT. The folder's navigation bar I have published as a portlet. One of its elements is a category drop-down list. I then added the navbar portlet to my page. If I navigate to the page and chose CAT from the drop-down, I get the following error:
Error: No page has been created for this Content Area (WWS-32141)
Interestingly, if I change the display from drop-down to links, and then click on the CAT link, ITEM is successfully retrieved. (This will, however, not be practical for my site.)
If I navigate to the content area, the drop-down works fine and retrieves ITEM in the result set.
The same problem occurs with all categories and perspectives, independent of whether they're shared or folder-owned.
We're running Portal 307 on Solaris.
Can anyone help?
Thanks
Stefan

Stephan,
I had exactly this problem with 9i on NT, interestingly it has now started working and I wish I knew what I had done !. I think you might find that if you create the Content Area from scratch and use the default navigation bar it may work, also I found that the drop-down list worked from a page from the start. Good luck.

Bank of scotland pages have lost the scroll bar and Page Down doesn't work either. they say it is a problem with Mozilla! So how do I navigate to the bottom of

The Bank say it is not a problem with their website but with the Browser. There is no way to access the bottom of the page so you can't pay bill online because you can't access the Pay button.

You may have switched on caret browsing.
*http://kb.mozillazine.org/accessibility.browsewithcaret
You can toggle caret browsing on/off by pressing F7 (Mac: fn + F7).
*Tools > Options > Advanced > General > Accessibility: [ ] "Always use the cursor keys to navigate within pages"
You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Sort by drop down doesn't work

Hi
Just trying to sort into Release date on the sort by field but it no longer sorts any ideas? I'm on the recent release of itunes.
Rob

Make sure that the Location Bar is not set to "Nothing":
* Tools > Options > Privacy > Location Bar: When using the location bar, suggest: History, Bookmarks, History and Bookmarks
This can also be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

Views dropdown on list view web part doesn't work

Thank you very much beforehand for any help with this issue, I really can't figure out what is going on.
So, I have big list (36125 items and about 25 public views there) and view selector on list view web part just stopped respond there couple of days ago. You click on down arrow and nothing happens... There are no any java script errors in browser console,
there are no any errors in ULS log. Profiler shows that request even is not sent to server when you click it to get list of views.
At the same time, this web-part works correctly with other lists on this site.
Do you have any ideas?

Hi,
I understand that the view drop down doesn’t work for a specific list. Can you browse these publish views by manually change the view name in the URL? There are two view drop downs in the ribbon(one under the List tab and one under the browser tab). Are
they all not working?
It is a big list, you need to make sure that there are no more than 5000 items in a single view. Only 8 lookups can be added to a view at the same time. You need to make sure that these thresholds.
For more information about these thresholds, please refer to this site:
Manage lists and libraries with many items:
http://office.microsoft.com/en-us/sharepoint-foundation-help/manage-lists-and-libraries-with-many-items-HA010377496.aspx
Thanks,
Entan Ming
Entan Ming
TechNet Community Support

Pos1, side up, side down doesn´t work

Similar Messages

Maybe you are looking for