POSDM Documentation

Hi
Does any One has some good deocumentation on POSDM

Hi,
If you are looking for technical help, Did you check this technical guide?
<http://sapknowhow.ning.com/profiles/blogs/sap-posdm-technical-guide>
AJ

Similar Messages

  • POSDM / TLOG Documentation

    Hi All ,
    I am looking for some documentation on POSDM customizing settings and also how the BADI implementations are handled .
    Also if you could point me to any link on how to plan and design the mapping requirements .
    The setup I am working on is External POS system <> XI <> POSDM <--> R3 .
    Any usefull link and documentation on this regard is really appreciated....
    thanks!!

    see this
    http://help.sap.com/saphelp_nw04/helpdata/en/b7/b6d59344e93443a7ac8934d2acfb55/content.htm
    SAP POS DM: Which type of IDoc should be used in POS DM inbound?
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/12/084110470311d1894a0000e8323352/frameset.htm
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/0f/7af634b576bc4ee10000009b38f83b/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/0d/e4813e77d46245e10000000a114084/frameset.htm

  • How can I generate IDOC(WPUUMS) from XML file in POSDM or in SAP Retail

    Hallo Retail expert,
                                I have following scenario,
    I have Retail Store who send me their daily sales report through Wincor Nixdorf Point of sale. There i am using standard POSLOG2 to SEEBURGER(its a middleware which act as Converter) xml format and then i post that data first in POSDM and then with BAPI i transfer or book that data to SAP Retail.
    Above is the one scenario which is working.
    This is the Second scenario.......
    I have some external Retail store, they dont have Wincor Nixdorf POS, so they send me their Sales Report through SEEBURGER(its a middle Hardware which act as Converter) and SEEBURGER Convert that Sales data to XML format. My question is....
    How can i upload or Convert a XML File into IDOC (WPUUMS)in SAP or in POSDM?
    any new suggestion are welcome.
    Thank you all in advance.
    regards,
    Niel

    Hi,
    1. To get the required XML Schema, use transaction code WE60 to go to the IDoc documentation -> enter the IDoc type you want to use (WPUUMS01). Flag control and data record. Then display the XSD by choosing Documentation -> XML Schema from the menue bar. Now you can donwload the XSD for usage in Seeburger.
    2. Create your mapping from the POS format into the IDoc XML format in Seeburger.
    3. Create an XML File Port in ERP or POS DM using transaction code WE21.
    3. To inbound the XML file from Seeburger into POS DM or SAP Retail Seeburger should trigger the function module EDI_DATA_INCOMING. Parameters for this FM are the Pathname to the XML file and the Portname you just created. Based on the port name the FM can derive the port type xml and the data will be handled as XML data.
    Regards Carsten

  • POS Interface with no POSDM!! Possible?

    My client is planning to implement standard POS interface in IS Retail. I have worked several times with POSDM in order to post the Sales, Financial and Inventory Data into SAP, but all used standard POSDM. The client does not have POSDM license and just wants to post the sales and financial data.
    Can this be done with standard POS Interface by posting WPUBON01, WPUFIB01 Idocs straight in IS-R?

    Hi Raj,
    My client is asking for POS to POSDM integration using SAP standard services (not IDOC or BAPI). You have mentioned using standard in your previous integrations. Can you please provide more information on the POS to POSDM that you have done so far. I have no knowledge in this integration. Any documentation or links that you can provide will be great.
    Thanks in advance.
    Regards,
    Srinivas

  • SAP POSDM RELATED

    Hi ,
    We have a requirement to capture customer information with sales data , in
    current data structure sales data is flowing through SAP POSDM to SAP BI and
    SAP ECC system , for inbound we are using multi-create IDOC .
    Please tell how can we capture customer information in SAP POSDM workbench
    and also how can the same information can be pass to SAP BI using data source
    0RT_PA_TRAN_CONTROL.
    In customer we want to capture Name , country , phone number , and gender .
    Regards,
    Vineet

    Hi,
    Goto the Link
    http://help.sap.com/
    In that at left hand site there is an overview documentation in which you can find the SAP R/3 and R/2 enterprise
    Click on that it will open an new page where u can find all the Releases like 4.7 , 5.0 and 6.0
    Click on the release u need and click on the
    LOGISTICS->SALES & DISTRIBUTION>BASIC FUNCTION....
    There you will find all the nodes step by step.
    Alternatively you can also cehck the details in search,, but it wiill help only if you know the correct node.
    regards,
    santosh

  • POSDM Installation

    Hi All
    I have installed a new BI 7.0 SR3 playpen system. I have now been asked install POSDM this system.
    Does anybody now how to install/activate POSDM or now of any documentation around installing/activating POSDM?
    Thanks
    Sam

    Downloads:
    edelivery.oracle.com
    Documentation:
    Oracle Business Application Intelligence Documentation content

  • Issue with creation of custom layouts using SAP Help Documentation

    Hi Experts,
    My requirement is to create a home custom page layout (using web dynpro) in Composite Environment. The default options available in CE are not useful for me. I set out to make a custom layout using the following this SAP Help Documentation: [          Creating a Web Dynpro Page Layout (SAP Library - Using the Portal as a Frontend)|https://cw.sdn.sap.com/cw/docs/DOC-102846]
    I have followed the instructions and followed all the steps, yet I fail to see the application in CE. The custom page layout is not displayed neither in options and is not available any where.
    Please let me know if anybody followed these steps and have got any success.
    Thanks in advance
    Srikant

    Hi
    Can somebody let me know if they have implemented a customised solution of creation of page layouts using Web Dynpro - as per the steps suggested by SAP.
    Thanks in advance
    Srikant

  • Web Services API Documentation?

    Hello,
    I was looking for documentation regarding OLM web services, since I'd need to perform a few simples queries from an external software. Could you please point me in the right direction?
    Thanks....

    Hi,
    Please see "Oracle Learning Management Implementation Guide" manual, Page 11-54 -- Publicly Callable Business Process APIs in OLM. Also see "Oracle Integration Repository User Guide".
    Oracle Learning Management Implementation Guide & Oracle Integration Repository User Guide
    http://www.oracle.com/technetwork/documentation/applications-089559.html
    Oracle Integration Repository
    http://irep.oracle.com/index.html
    Thanks,
    Hussein

  • Where is Creative Cloud written documentation?

    I can find videos but they are a poor substitute for professionally prepared documentation. Where is Adobe's documentation of Creative Cloud services?

    Hi Ted,
    Help content for the individual products can be accessed from here http://helpx.adobe.com/support.html?promoid=KAWQK#
    Go the More Products section for an overall product list. Many of the products have a PDF version of the help which can be downloaded from the product specific help page.
    -Dave

  • Mobile iPhone Application for SAP B1 Documentation

    SAP releases the following statement on their landing page for their customers about using iPhone App in version 8.8.  Direct copy and paste:
    I am already using SAP Business One. Are there any requirements to be able to use this app?
    You need to be running SAP Business One version 8.8 with a professional user license. Before you start using the app, make sure your SAP partner configures the mobility settings in SAP Business One.
    Where is the documentation that is the checklist for installing and getting the mobile app up and running?  You know, the usual documentation from step A to Z - go to Add-ons and do this, go to User and do this, etc.   All I can find are videos/documents that are marketing oriented.  I have the user guide "Setting Up Mobile Scenario in 8.8", but it is woefully lacking in several steps (ie, it says some fields are mandatory, but SAP does not even mention what "code" column is supposed to mean).
    Anyone else have any luck digging out the pertinent information from SAP sites which SAP should have prominently highlighted to its partners before rolling this out?  Where can I find it?
    This all seems to be a rather disconnected roll-out.
    Thanks in Advance - Zal

    Here is part of the answer - Go here:  https://websmp203.sap-ag.de/sbo-swcenter
    Until it is changed, select "Updates" (not the other areas stated in some documentation, videos, and threads) and select "SAP Business 8.8", then "B1 8.8 Integration Component", and then it can be downloaded.
    I will add more info as the process goes along, if there is anything more...
    TIA - Zal

  • Where do I read in the documentation the list of the system properties?

    Yep. Sounds stupid. But it's true. I read in all these forums where and how to set the truststore and so on but it would be beautiful to understand it my own.
    1. First I read setting the -Djavax.net.ssl.trustStore in the VM arguments.
    2. Then I find out the the -D is just for setting something like a static property.
    3. Next I want to read about the system properties. Who, what and where the Java tries to get this system property. I do not find it.
    What I find is great help in these forums and solving this kind of problems seems easy... I googled and the only place I found info about this is in a boulder.ibm.com site:
    http://publib.boulder.ibm.com/infocenter/iseries/v5r4/index.jsp?topic=/rzaha/sysprop2.htm
    http://publib.boulder.ibm.com/infocenter/iseries/v5r4/index.jsp?topic=/rzaha/rzahajssesysprops.htm
    I also found some info on a sun tutorial but not an official documentation. Do you know where to find it? It seems that my learning is always about finding the right place to find information and not guessing and trying.
    Thanks!!

    Thanks for your soon reply. Yeah, I found that but I really was expecting a more serious documentation.
    I have to admit that it is documented. Yes. But I didn't expect to find that in middle of a guide. But more in a reference or in a specification document. It's inside the "Customization" and in a table, yes... But it's a guide!!
    I like Java but something to worry about is the "too many - too less" documentation. Documentation is not clear enough and all the hundreds of options you have can make the programming with Java no good. It would sound like a good thing have a lot of choices and hundreds of places to look info for but I am a bit disappointed with that. It's not clear enough to find the right info.
    Anyway, thanks a lot for your help!! I will have to live with that.
    Guide: http://java.sun.com/j2se/1.5.0/docs/guide/security/jsse/JSSERefGuide.html

  • Infoprovider documentation in BEx query designer

    Hi Experts,
    While users creating queries in BEx query designer (BI7) they have to see the predefined documentation about that inforprovider. Can we achive this requirement?
    What is the use of "Documents" in BEx query designer? Can we show the documentaion under this area?
    Thanks in advance.
    thanks and regards,
    Raju

    Hi,
    Plese go through these links which provides you detailed view on Documnet Navigator and Creating/Editing Documnets in it
    Business Document Navigator :[http://help.sap.com/saphelp_nw70/helpdata/EN/dd/f5253715dfb808e10000009b38f889/content.htm]
    Creating New Documents:[http://help.sap.com/saphelp_nw70/helpdata/EN/df/77ff72021311d3ae4b0000e82deb58/content.htm]
    I hope this helps you.
    Regards,
    Rajknadula

  • Customizing header and footer in the printed documentation

    Hi,
    I'm using a trial version of RoboHelp 2007 and Word 2003.
    I have two question about customizing the header and footer
    of the printed documentation.
    In the printed documentation the footer repeat at the bottom
    of each page and contain page numbers, which appear left-justified
    on even-numbered pages and right-justified on odd-numbered pages.
    How can I customize the footer, that pages numbers appear
    always right-justified?
    In the printed documentation the header repeat at the top of
    each page and are blank on the first page of sections. The name of
    the manual appears on even-numbered pages, left-justified. The name
    of the root chapter appears on odd-numbered pages, right-justified.
    How can I customize the header, that
    on every page the name of the root chapter and the name oft
    the manual appears? Furhermore I want to include a picture in the
    header. How can I realise this?

    You can't from RH. See the article on my site.
    Images in the header are tricky. If you use the setting that
    I think enables that, you will also get the images in the TOC. Try
    putting a two cell table and putting the heading in one and the
    image in another.

  • Unable to Generate Printed Documentation in PDF Format

    This past week I started having a consistent error when attempting to generate a Printed Documentation layout. This error reads "Internal error encountered,  Failed to generate Printed Documentation."  Prior Printed Documentation builds on this same project completed fine. Nothing was done to the Help project between the times when this worked and when it no longer was able to create Printed Documentation.
    I receive this error even if I generate an entirely new "blank project" build, and then attempt to create a Printed Documentation build from this new blank project.  Researching this error, I see this has been a reoccuring problem with this product for some time. The few threads that list the problem as having been "fixed" provide resolution steps that have not worked in my case. Right now I am waiting for our IT Helpdesk people to re-install the Suite. Hopefully this will resolve this problem.
    Additional information on this problem - PDF Printed Documentation is failing - the HTML build works fine. If I select just a .DOC Printed Documentation output, this also works correctly. The resulting Word document looks good, although hyperlinks do not work within this Word document. I have reloaded Office 2003 as a troubleshooting effort, but this has nbot resulted in any change in symptoms.
    The entire error text is enclosed below, although several other people have also done this in past entries. The few lines that read "Warning, and then report a style issue is NOT the problem here. As stated earlier, when I do this same Printed Documentation build on an entirely new "blank project" it does not work, and the Output text in that case does not contain any such "Warnings" about Styles.
    Error text below:
    Starting to build Printed Documentation...
    Printed Documentation processor 8.0.1.204
    Building C:\Documents and Settings\tcleary\My Documents\My RoboHelp Projects\Adobe RoboHelp 8\10515-0366-5004_7800v-hh rsp\!SSL!\Printed_Documentation.doc ...
    Preparing to create Printed Documentation...
    Clearing output folder...
    Preparing files for Print Document...
    Copying files...
    Updating files...
    Finished preparing in 2 seconds.
    Preparing environment...
    Printed Document Generator Environment: Word 11.0.8313,  OS 5.1.2600, RAM 2048 M Bytes
    Building Printed Documentation 'Printed Documentation'...
    Building Single Document 'Printed_Documentation.doc'...
    Building 'RF-7800V-HH About this Help'...
    Building 'Table of Contents'...
    Preparing to build chapters...
    Building 'RF-7800V-HH Help and Support'...
    Processing 'RF-7800V-HH Welcome'...
    Building 'RF-7800V-HH RSP Help'...
    Processing 'RF-7800V-HH Station Information'...
    Building 'RF-7800V-HH Features'...
    Processing 'RF-7800V-HH Features'...
    Processing 'RF-7800V-HH Anc. Connector Mode'...
    Processing 'RF-7800V-HH No-Sync Beeps'...
    Processing 'RF-7800V-HH Power Management'...
    Processing 'RF-7800V-HH Retransmit'...
    Processing 'RF-7800V-HH USB Mode'...
    Processing 'RF-7800V-HH Broadcast Gateway'...
    Processing 'RF-7800V-HH IP Routing'...
    Processing 'RF-7800V-HH Voice Settings'...
    Processing 'RF-7800V-HH Time and Date Settings'...
    Processing 'RF-7800V-HH Position Reporting'...
    Processing 'RF-7800V-HH User Interfaces'...
    Processing 'RF-7800V-HH Net Switches'...
    Processing 'RF-7800V-HH Ethernet Interface'...
    Building 'RF-7800V-HH Global Settings'...
    Processing 'RF-7800V-HH Global Settings'...
    Processing 'RF-7800V-HH Radio Passwords'...
    Processing 'RF-7800V-HH GPS'...
    Processing 'RF-7800V-HH Locksets'...
    Building 'RF-7800V-HH Network Types'...
    Processing 'RF-7800V-HH Network Types'...
    Building 'RF-7800V-HH Fixed Frequency LOS'...
    Processing 'General Information - Fixed Frequency LOS'...
    Processing 'RF-7800V-HH FF Network Information'...
    Processing 'RF-7800V-HH FF Preset'...
    Processing 'RF-7800V-HH FF General'...
    Processing 'RF-7800V-HH FF Comsec'...
    Processing 'RF-7800V-HH FF Data-Voice'...
    Processing 'RF-7800V-HH FF Squelch'...
    Processing 'RF-7800V-HH FF Advanced'...
    Warning: style (p.Heading7) is not defined and will be mapped to 'Normal'.
    Building 'RF-7800V-HH Quicklook'...
    Processing 'General Information - Quicklook'...
    Processing 'Hopset Creation - Quicklook'...
    Processing 'RF-7800V-HH QL Network Information'...
    Processing 'RF-7800V-HH QL Preset'...
    Processing 'RF-7800V-HH QL General'...
    Processing 'RF-7800V-HH QL Comsec'...
    Processing 'RF-7800V-HH QL Data-Voice'...
    Processing 'RF-7800V-HH QL Advanced'...
    Building 'RF-7800V-HH Sample Plans'...
    Processing 'General Information - Sample Plans'...
    Processing 'Simple Fixed and Quicklook Nets'...
    Processing 'Single Fixed and Quicklook Nets'...
    Processing 'RF-7800V-HH Manage Keys'...
    Processing 'RF-7800V-HH Program Radio'...
    Building 'RF-7800V-HH Tech Support'...
    Processing 'RF-7800V-HH Technical Support'...
    Processing 'RF-7800V-HH Radio Firmware Compatibility'...
    Building 'FAQs'...
    Processing 'RF-7800V-HH FAQ Index'...
    Processing 'FAQ 01'...
    Warning: style (span.strong) is not defined and will be removed.
    Warning: style (p.para) is not defined and will be mapped to 'Normal'.
    Processing 'FAQ 02'...
    Processing 'FAQ 03'...
    Processing 'FAQ 04'...
    Processing 'FAQ 05'...
    Processing 'RF-7800V-HH Glossary'...
    Warning: style (p.FM_CellRowHead) is not defined and will be mapped to 'Normal'.
    Warning: style (span.Glossary) is not defined and will be removed.
    Warning: style (p.FM_CellBodyLeft) is not defined and will be mapped to 'Normal'.
    Warning: style (p.FM_GLOSSARY) is not defined and will be mapped to 'Normal'.
    Warning: style (p.FM_Para) is not defined and will be mapped to 'Normal'.
    Completed building chapters...
    Building 'Index'...
    Updating list paragraphs...
    Updating images...
    Updating page numbers...
    Updating page headers...
    Updating Table of Contents...
    Updating Index...
    Saving 'Printed_Documentation.doc'...
    Generating 'Printed_Documentation.pdf'...
    Failed the generate PDF file 'C:\Documents and Settings\tcleary\My Documents\My RoboHelp Projects\Adobe RoboHelp 8\10515-0366-5004_7800v-hh rsp\!SSL!\Printed_Documentation.pdf'...
    Failed to save 'Printed_Documentation.doc'...
    Cleaning up temporary files...
    I am pretty sure nobody will have any fix suggestions that work to solve this problem, but I am making this entry for historical purposes. I will add an entry stating whether the Suite reload resolves this issue.
    Thanks,
    Tim C @ Harris

    If I select ONLY the Word DOC Output format in the Printed Documentation
    setup, the output is created without an error (output text below).  Links do work within
    this Word document (a symptom change since installing patch 8.0.2).
    When I use this Word document to create a PDF (using the Adobe PDF
    printer driver) a PDF is successfully created, however no bookmarks are
    created in the bookmarks panel and none of the links in this PDF work
    (although they are created looking like they will work, i.e., blue
    underlined text).
    Regards,
    Tim
    ------------- Output Text --------------------------
    Starting to build Printed Documentation...
    Printed Documentation processor 8.0.1.204
    Building C:\Documents and Settings\tcleary\My Documents\My RoboHelp Projects\Adobe RoboHelp 8\10515-0366-5004_7800v-hh rsp\!SSL!\Printed_Documentation.doc ...
    Preparing to create Printed Documentation...
    Clearing output folder...
    Preparing files for Print Document...
    Copying files...
    Updating files...
    Finished preparing in 3 seconds.
    Preparing environment...
    Printed Document Generator Environment: Word 11.0.8313,  OS 5.1.2600, RAM 2048 M Bytes
    Building Printed Documentation 'Printed Documentation'...
    Building Single Document 'Printed_Documentation.doc'...
    Building 'RF-7800V-HH About this Help'...
    Building 'Table of Contents'...
    Preparing to build chapters...
    Building 'RF-7800V-HH Help and Support'...
    Processing 'RF-7800V-HH Welcome'...
    Building 'RF-7800V-HH RSP Help'...
    Processing 'RF-7800V-HH Station Information'...
    Building 'RF-7800V-HH Features'...
    Processing 'RF-7800V-HH Features'...
    Processing 'RF-7800V-HH Anc. Connector Mode'...
    Processing 'RF-7800V-HH No-Sync Beeps'...
    Processing 'RF-7800V-HH Power Management'...
    Processing 'RF-7800V-HH Retransmit'...
    Processing 'RF-7800V-HH USB Mode'...
    Processing 'RF-7800V-HH Broadcast Gateway'...
    Processing 'RF-7800V-HH IP Routing'...
    Processing 'RF-7800V-HH Voice Settings'...
    Processing 'RF-7800V-HH Time and Date Settings'...
    Processing 'RF-7800V-HH Position Reporting'...
    Processing 'RF-7800V-HH User Interfaces'...
    Processing 'RF-7800V-HH Net Switches'...
    Processing 'RF-7800V-HH Ethernet Interface'...
    Building 'RF-7800V-HH Global Settings'...
    Processing 'RF-7800V-HH Global Settings'...
    Processing 'RF-7800V-HH Radio Passwords'...
    Processing 'RF-7800V-HH GPS'...
    Processing 'RF-7800V-HH Locksets'...
    Building 'RF-7800V-HH Network Types'...
    Processing 'RF-7800V-HH Network Types'...
    Building 'RF-7800V-HH Fixed Frequency LOS'...
    Processing 'General Information - Fixed Frequency LOS'...
    Processing 'RF-7800V-HH FF Network Information'...
    Processing 'RF-7800V-HH FF Preset'...
    Processing 'RF-7800V-HH FF General'...
    Processing 'RF-7800V-HH FF Comsec'...
    Processing 'RF-7800V-HH FF Data-Voice'...
    Processing 'RF-7800V-HH FF Squelch'...
    Processing 'RF-7800V-HH FF Advanced'...
    Warning: style (p.Heading7) is not defined and will be mapped to 'Normal'.
    Building 'RF-7800V-HH Quicklook'...
    Processing 'General Information - Quicklook'...
    Processing 'Hopset Creation - Quicklook'...
    Processing 'RF-7800V-HH QL Network Information'...
    Processing 'RF-7800V-HH QL Preset'...
    Processing 'RF-7800V-HH QL General'...
    Processing 'RF-7800V-HH QL Comsec'...
    Processing 'RF-7800V-HH QL Data-Voice'...
    Processing 'RF-7800V-HH QL Advanced'...
    Building 'RF-7800V-HH Sample Plans'...
    Processing 'General Information - Sample Plans'...
    Processing 'Simple Fixed and Quicklook Nets'...
    Processing 'Single Fixed and Quicklook Nets'...
    Processing 'RF-7800V-HH Manage Keys'...
    Processing 'RF-7800V-HH Program Radio'...
    Building 'RF-7800V-HH Tech Support'...
    Processing 'RF-7800V-HH Technical Support'...
    Processing 'RF-7800V-HH Radio Firmware Compatibility'...
    Building 'FAQs'...
    Processing 'RF-7800V-HH FAQ Index'...
    Processing 'FAQ 01'...
    Warning: style (span.strong) is not defined and will be removed.
    Warning: style (p.para) is not defined and will be mapped to 'Normal'.
    Processing 'FAQ 02'...
    Processing 'FAQ 03'...
    Processing 'FAQ 04'...
    Processing 'FAQ 05'...
    Building 'RF-7800V-HH Glossary'...
    Warning: style (p.FM_CellRowHead) is not defined and will be mapped to 'Normal'.
    Warning: style (span.Glossary) is not defined and will be removed.
    Warning: style (p.FM_CellBodyLeft) is not defined and will be mapped to 'Normal'.
    Warning: style (p.FM_GLOSSARY) is not defined and will be mapped to 'Normal'.
    Warning: style (p.FM_Para) is not defined and will be mapped to 'Normal'.
    Completed building chapters...
    Building 'Index'...
    Updating list paragraphs...
    Updating images...
    Updating page numbers...
    Updating page headers...
    Updating Table of Contents...
    Updating Index...
    Saving 'Printed_Documentation.doc'...
    Completed building Printed Documentation...
    Preparing output directory...
    Cleaning up temporary files...
    Finished Printed Documentation generation in 5 minutes 36 seconds.
    Building Printed Documentation complete.

  • CS4 Suite (all Windows versions) - documentation of XML and pre-configuration of components?

    With a view to packaging and deploying CS4 in Microsoft enterprise environments (ie GPO restricted desktops, mandatory user profiles, non-administrative user base, at or near minimum spec hardware) I was wondering if anyone was aware of any documentation, official or otherwise, for pre-configuration or omission of individual components within the CS4 suite in order to more specifically tailor their operation to user requirements.  Eg, such as the way Adobe provide a transform generator/editor for Acrobat in its standalone form.
    The instructions for performing silent installs with or without the more major components (such as Dreamweaver, Photoshop etc) work fine, and the Adobe CS4 Deployment Toolkit (aka AdobeUberInstaller) deals with a number of omissions in the base installer such ELUA and updates suppression.  However there are various options within the applications themselves I would like to change the defaults for at install time (eg suppress Adobe Bridge from prompting to run at startup, address Acrobat's refusal to run until another element of the suite has been run first etc), patches I would like to slipstream rather than apply retrospectively (currently Air, Indesign, Photoshop), and some elements (such as foreign language components and 64bit support) I would ideally like to omit from the source package altogether to keep the size down - 6GB+ to 500 clients is quite an ordeal!
    Web resources such as application deployment forums have allowed me to address some of the above, but I would be very interested in the feedback/experiences of this community.  I appreciate what I'm asking is somewhat vague but any crumbs of wisdom all add up...
    Many thanks in advance for any suggestions.
    Bill

    The best is to get the versions in which you have developed/tested. These can be found in MAX under Software, if it is possible provide a link to the NI ftp download URL.
    Then export the settings in MAX (for tasks/scales) if you use them and provide a simple app that loads these items into MAX.
    For RIO I'm not totally sure but I would create 'Getting started' that outlines what settings (IP/DNS etc.) to get the user started.
    Ton
    Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
    Nederlandse LabVIEW user groep www.lvug.nl
    My LabVIEW Ideas
    LabVIEW, programming like it should be!

Maybe you are looking for