POSDM - General

Hi
We have started our Retail practice and we need to build our POSDM capability in our organisation to work on our ongoing Retail implementation project. We are operating at chennai and can anyone help us by giving suitable training institutes in Chennai or bangalore to train our BI consultants on POSDM .
I hope SAP offering training for POSDM for 3days and the training will be conducted in Germany. It will be helpful for us if some one gives us some information.
Thanks in Advance
Kumar

Closed

Similar Messages

  • IS-Retail POSDM- double posting of  material documents and billing document

    Hello All,
    I had initially posted this question in "Industries Solution General" forum. Reposting it in the appropriate forum-
    We have a nightly job for program "RWPOS_PARA_ENQUEUE" which processes all WPUBON idocs (sales info) that comes in from POSDM. Sometimes we have noticed that for one idoc 2 material documents and 2 billing documents are being created with the same information.
    Note that this happens sporadically and we have no idea why or when it can happen. Also, we have duplicate checks in POSDM and this happens only when the idoc flows into ECC from POSDM i.e. one sales idoc posts 2 sets of documents for no apparent reason. Is there any way to prevent this? Why is this happening? Your inputs will be really appreciated.
    Thanks,
    Smitha

    hi,
    Just go to FB03 click enter and then
    Company code
    Fiscal Year
    Ledger
    Document type against customer invoice DR and then if u hav an idea abt the customer invoice doc then give doc number ....other excute and search for the customer no....
    And then double click on the document
    then goto ENVIRONMENT -
    > Document over view -
    > relation ship brower click
    then you can see all the relating document to that account  i.e account doc,profitcenter doc ,material ,oytbond delivery doc ,billing doc etc...
    if useful assign points.....
    regards,
    santosh kumar

  • POSDM - filter value for category code determination

    Hi Guru's
    Pl advice on significance of setting the filter value for Category Code Determination in POSDM config under /posdw/img -> general settings.
    If my inbound tlog contains all the relevant POS transaction type codes , which have been defined in config then probably :
    - I do not need to give any filter value for Category Code Determination
    - I do not need to maintain any definition and assignment entries under posdw/img -> Integration with Other SAP Components -> SAP POS -> Definition of Values for Category Code Criteria AND Assignment of Category Code Criteria to PIPE Category Codes
    Please advice.....
    thanks!!

    Hi,
    Select new entries and give 2 digit numeric value in sequence in tax field. it is taking only numeric values.
    It might be helps to u.
    Regards
    Sasikanth.Ch

  • POSDM message

    Hi Gurus,
    I got the following message in my POSDM for a transaction
    "Task was rejected because it is not relevant"
    Coulfd you please tell me what the error actually is?
    Thanks and best regards,
    D.K.Ahme

    Hi,
    please check if you have activated the "Filter Balue for Category Code Determination" in the General Settings tab. This setting controls if the mapping tables for SAP POS (under Integration with other SAP components) is used or not. In your case this seems to be the issue.  (entry would be 0001)
    You are sending in 1001 but the system either finds more than one entry for 1001 without being able to assign the site to  aprofile or there is no entry for 1001.
    Of course these tables can be used for Code Mapping from other POS clients as well.
    BTW: the difference in behaviour is based on the fact that the BAPI does not take those mapping tables into consideration.
    Kind regards,
    Stefan
    Edited by: Stefan Scheppat on Aug 14, 2009 9:19 AM

  • POSDM Requirement - Delayed Consumption in ECC for 251 GI

    Greetings SCN,
    I have a requirement for POSDM relating to the timing of the goods issue posting in ECC. When a customer comes to the store to buy an article, the articles are sometimes not ready to be picked up when the customer places the order. They generally need to go to another store/lab/vendor and be created/adjusted/manufactured.
    Presently, we consume (goods issue) the inventory on the article right when the customer pays (i.e. Aug 1st). We want to wait until the customer actually receives the article, either pick up or delivery (i.e. Aug 5th), to consume the articles (i.e. 251 goods issue. We need to do this because early consumption affects the planning at the stores. In Summary, we want the Goods Issue in ECC to occur on Aug 5th, not on Aug 1st.
    Ideally, we'd like an option with least impact on the existing systems and would like to minimize customizations. Looking forward to your thoughts.
    Thanks,
    Deep

    Hi Vikrant,
    Your point is valid and I'm thinking along these lines as well. But I'm trying to determine the specifics for accomplishing this.
    I had thought about creating a 2nd (dummy) storage location in the store. Whenever this type of sale (based on Sales Item Type) comes into POSDM, I would do a 311 movement for a transfer between the one storage location in the store to another. This would post as a 311 movement in ECC but NOT as a 251. Then upon confirmation of pick up/delivery by the customer, we would do a goods issue for the article from the 2nd storage location to ECC with the standard 251 movement.
    I tried to configure this but was unsuccessful as IDoc WPUUMS only creates a 251 movement by default. Within WPUUMS, there is only article, quantity & sales total. There is no field for movement type.
    Does this seem like a viable option to accomplish my requirement?
    Thanks,

  • Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only. However opening a CSS file does not prompt that it is alr

    Generally when creating a Word file from either a Mac or Win7 pc and opening it on two different machines (either one first) it always prompts that the file is open and will be opened as read only.
    However opening a CSS file does not prompt that it is already open on or from any machine which is causing code edits to be lost.
    What we found from out testing:
    - The file can be saved from one user to the server and WILL NOT PROMPT on other machines until the saving machine has the Dreamweaver program closed completely
    - The file can be closed and  Dreamweaver minimised to the launch bar but it still will not register on other machines that it has been changed.
    - Also, until the  Dreamweaver program is closed on the machines, it will continue to open it's saved version of the file. 
    Example Scenario:
    - User 1 opens test.css (which is 2000 lines) and adds some code to the end of the file to bring it up to 2500 lines
    - Meanwhile User 2 opens test.css as well (opens as 2000 lines as User 1’s edits have not yet been saved) and adds in code to bring it to 2300 lines
    - User 1 saves his file and closes it - but  Dreamweaver is still open.
    - User 2 also saves his file and leaves  Dreamweaver  open.
    - The server will report the size and last edit of the file the same as User 2 as he was the last person to save it (and if you open from the Win7 Machine it will show as User 2’s 2300 line version)
    - If User 1 then open's the file again (from either the 'recent' in Dreamweaver OR clicking on the file directly in Finder...which version opens.... The version that User 1 saved! Not the true version on the server, but the version that User 1 edited and saved with 2500 lines in it.
    - Same for User 2, he will open 'his' version with 2300 lines in.
    Other information:
    - Files are opened directly from the server
    - Sometimes the users will save incrementally and re-open
    - Most of the time users will save incrementally and keep the files open
    - The users will never not save incrementally and just save when closing the file once finished
    - The users are usually working on the files all day
    - It is always the bottom lines of code that are lost. It could be a case of the two versions being mixed up and cutting off the newly added lines based on the line count (possibly).
    It is as if Dreamweaver is holding a cache of the version locally and then only properly looking back to the server when it has been completely closed. It is very difficult to see how the server is causing such an impact on these files, there are very few logs which are giving any indication to the root cause of the problems.
    Anyone know if this is a known issue?
    Is there a way that there can be a featured implemented on the server that doesn't allow another user to open a file if it is already open on another machine?
    Thanks

    Your server file handling has nothing, and really nothing to do with Adobe software. If files don't get locked for (over-)writing and/or lose connection to the program opening them, then your server is misconfigured. It's as plain and simple and that. Anything from "known file types"/ file associations not being set correctly, MIME types being botched, crooked user privileges and file permissions, missing Mac server extensions, delayed file writing on the server, generic network timeout issues and what have you. Either way, you have written a longwinded post with no real value since you haven't bothered to provide any proper technical info, most notably about the alleged server. Either way, the only way you can "fix" it is by straightening out your server and network configuration, not some magic switch in Adobe's software.
    Mylenium

  • 2 iPads, but can only connect one iPad at a time to my home network.  Is this a known issue with Mac/iPads in general?

    At home I have a HP PC, netbook and Sony laptop with no connection issues.  Last year I bought an iPad 1 for my wife.  This year I bought an iPad 2 for myself.  However, only one iPad can connect to the wifi home network at a time. If I am using the iPad2 then the iPad1 fails to connect to the internet.  if the iPad1 is being used then the iPad2 cannot connect.   I tried resetting iPad network settings for both, reset router, and updated both iPads to latest software/firmware yesterday.  Right now the only iPad that shows any connection is the iPad1.  The iPad2 does not see the home network or any other outside network.  Any suggestions or ideas on how to resolve this?  It is odd the network issues only affect the iPad's.

    @dananova,
    It sounds like you need to either increase the number of dynamic IP addresses your router will hand out or change some of your devices to static IP addresses. 
    Check the router manual on how to change the dynamic IP range of your router.  If you don't have a manual, you can go to Belkin's website and download it.
    To change the IP address of your iPads to static addresses, go to Settings > Wi-Fi and tap the ">" next to the name of your wireless network.  DHCP should be highlighted.  Write down the all the settings on the screen. Next tap the Static button.  Enter the exact same information that you copied from the DHCP screen with the exception of the last 3 digits of the IP address.  Enter a new 3 digit number in this spot.  Generally the original IP address will end with a low number such as 009, so pick a number that is not that low but less than 255.  I would suggest a range of 240 to 250, unless the original IP range falls near this range.  Also make sure you use a different 3 digits for each device you set to use a static IP address.

  • Error while updating decimal places in general settings

    Hii All
             I have got an error while updating Decimal places in General Settings
    Cannot update while another user is connected to the company i have checked, there is no other user logged in, i could add other settings but the problem is only with Decimal Places
    Note : there are no postings yet, a fresh database for a new client
             what could be the possible reason
                                                                 thanks
                                                                         RIYAZ

    Hiii All
          As a forum rule, i have initially gone through with the existing threads and then i was force to post a thread,
              would be helpfull if there is any other way..
                                                Thanks
                                                         RIYAZ

  • Ipod Touch 1st Generation General Questions.

    I just read where the 1st generation Ipod Touch cannot upgrade software past 3.1.3. SO I assume all of the Apps I have seen and some I have downloaded that state I need newer software are not useable on the Touch I have?
    Oh man it appears I got something which is basicaly useless other then playing music like my Ipod Nano can do.
    Can I load any Books on the Ipod Touch?
    Where can I get information as to what the limits I have with this Ipod Touch 1st Generation so I can get an Idea of what I can do and what I cannot do so I am not sitting trying to achive something that it is not capable of?
    I also do not want to irritate the heck out of the community by asking questions or trying to fix errors I think I have when in reality my Ipod is not designed to do the task in the first place.
    I do see Wifi on my Ipod Touch but it does not appear to connect even when I use the correct password so I assume it is limited or has to have a Specific Security setup in teh Router to connect properly and would like th know that.
    I read some of the Software 3.1 Manual but it does not really go into detail as far as wifi connections just the bare basics which I know I did correct.
    I am thinking that it cannot connect to WPA/WPA2 Security and I will have to Dummy down my Wifi Security to accomidate the Ipod Touch is this correct and where can I get this Information also?
    I bought this Used and have no Box or any Information about it at all.
    Thanks again

    Decalescence wrote:
    I just read where the 1st generation Ipod Touch cannot upgrade software past 3.1.3. SO I assume all of the Apps I have seen and some I have downloaded that state I need newer software are not useable on the Touch I have?
    Oh man it appears I got something which is basicaly useless other then playing music like my Ipod Nano can do.
    Can I load any Books on the Ipod Touch?
    One if you can find an app that support the book format. Many book are available in non-DRM pdfs and I think you can find an app that will read pdfs. As you likely know, iBooks is not compatible with the 1G
    Where can I get information as to what the limits I have with this Ipod Touch 1st Generation so I can get an Idea of what I can do and what I cannot do so I am not sitting trying to achive something that it is not capable of?
    I know of no such document or site.
    I also do not want to irritate the heck out of the community by asking questions or trying to fix errors I think I have when in reality my Ipod is not designed to do the task in the first place.
    I do see Wifi on my Ipod Touch but it does not appear to connect even when I use the correct password so I assume it is limited or has to have a Specific Security setup in teh Router to connect properly and would like th know that.
    See below for wifi problem
    I read some of the Software 3.1 Manual but it does not really go into detail as far as wifi connections just the bare basics which I know I did correct.
    See below
    I am thinking that it cannot connect to WPA/WPA2 Security and I will have to Dummy down my Wifi Security to accomidate the Ipod Touch is this correct and where can I get this Information also?
    See Below
    I bought this Used and have no Box or any Information about it at all.
    Thanks again
    For wifi problem:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router.
    - Reset networks settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    The last should identify what encryption works with the 1G.

  • Jonatan R. Aug 1, 2012 5:42 PM Hello, didnt really know hwere to post this guess it more belong under like "computers" generally,    but! For a while...        (-THE LONGER VERSION) : No whait!, let me start where it all began, 2009, a december (erhh.. ii

    Hello, didnt really know hwere to post this guess it more belong under like "computers" generally, 
    but! For a while... 
        (-THE LONGER VERSION) :
    No whait!, let me start where it all began, 2009, a december (erhh.. iii think? Hwatever!) litlle me hwere nearly Totally blank to the computer world. And suddenly it stood there on the table, a shining (it was shining back there) new "hp pavillion entertainment pc" with its smell of fresh plastic mixed hwith the strong smell from the cardboardbox, remember it as if it were yesterday
    ... Since then.... I have today a good solid pc knowing! (at more advance level cmd,bott menu, recovery, blah, blah... NERD!) here at the last awhile, ive prommised to make a lot! A lot of video projects!
    (okay 2, but some big ones!) avchd multilayer 2 hours!!!! 
    So the poor hp laptop -dual core i2 4gb ram, has been begged to it knees! And simply cant handle it of course! and it have just trough time benn loaded with lots of crap, and is extremly noisy, heat, slow, anoying = unusable!
    SO hwat i need is...
        (-THE SHORTER) :
    A computer setup that will EASILY! could handle stuff like that  (avchd, multilayer, 2 hours project) -and simmilar. A total power machine! But Im tired of windows! And ugly cheap looking design! The times have changed and i change with them!
    NOW I WANT APPLE!! 
    But but but... Hwat should i get????
    1. Im NOT a billionare!
    2. I repeat: NOT a billionare!
    3. I also need portability for every day use beyond the hardcore creative editing and use
    AT LAST:
     i saw in front of me this genius plan... With a macbook pro, a tuned one, with as much of ram,cpu,gpu, and everything else as it can posibble have
    -the perfect combination of transportabillity, everydayuse and total power!
    When it gets combine with,
    A cinemadisplay
    A extra keyboard
    And a extra magic mouse
    And this power macbook pro, with screen, mouse, and keyboard i've found a really good offer at.
    MY ACTUAL QUESTION.... :
    Now it is yours turn to please! be creative! Please! Hwat does all you genius heads! think and say?
    WILL A super tuned MACBBOK PRO COMBINED WITH ACCESSORIES, AT ALL, BE ABLE TO REPLACE A STRONG MAC PRO, OR AT LEAST BE MORE THAN ENOUGH FOR REALLY HEAVY STUFF? And if yes, HOW strong actually (ram,cpu,gpu...) will it need to have to be "more than enough"?
    If no, what would all of  you then suggest that is perfect in relation to everything?
    PLEASE ANSWER!!

    Jonatan R. wrote:
    WILL A super tuned MACBBOK PRO COMBINED WITH ACCESSORIES, AT ALL, BE ABLE TO REPLACE A STRONG MAC PRO,
    No,
    the MacPro is the muscle machine and not constrained by power or cooling limitations like the MacBoo Pro is.
    OR AT LEAST BE MORE THAN ENOUGH FOR REALLY HEAVY STUFF?
    If you press the MacBook Pro like a desktop machine, it will blow fans like a hurricane but will do the job eventually.
    The longer you blow fans on a laptop, the sooner it clogs up with crippling dust and shortens the life of the machine.
    You'll need the top end 15" or better, not the 13" as it has no dedicated graphics, only CPU graphics.
    Preferably if you just now getting into video, you should be considering Avid on a Windows 7 tower, it's because Apple has been ignoring the MacPro for hardware updates to improve it and it seems like they don't want to carry it anymore. Also the last Final Cut Pro version had Hollywood up in arms as Apple removed a lot of required abilities to make it more "consumer friendly" which upset the Pro market who likes control.
    Apple is focusing on the consumer computing market and getting away from the "Pro" market which needs the heavier hardware to handle video needs. They stopped selling the X-RAID and the X-Server, so Apple really isn't a "computer" company any longer.
    Sure you can use a MacBook Pro and a external monitor for doing home movies and such occasionally, but if your into serious production you need to consdier other options now.
    There is nothing wrong in getting a MacBook Air and a Windows 7 professional video tower too.

  • Update of BP General Data during creation of BP

    Hi,
    I am currently using BADI ADDRESS_CHECK to perform an external check in a 3rd party application using XI to check if the customer name/address is flagged as a "denied party".
    This works fine and returns the correct response if the check finds a denied party.
    However, if this is the case ie. a denied party I want this to set some BP data accordingly during the same BP maintenance.
    The data I need to set is as follows:
    1. BP central block (general data)
    2. BP status needs to be set
    I have located function module BUP_MEMORY_BUT000_FILL that I am calling with a BP structure with the necessary block set to 'X' but it does not seem to do anything.
    Can anyone provide details on how to call this function module to set BP general data during a create or a change of a BP as I must be missing something.
    Also, can anyone tell me what the equivalent function module is for BP status data ?
    Any help is greatly appreciated.
    Cheers
    Colin.

    HI
    You cud use the following BAPI's for BP general data
    BUPA_CENTRAL_CHANGE
    Have a look at the function group:BUBA_4 in package :BUPA
    For status you could use the following
    CRM_BUPA_FRG0050_CHANGE
    CRM_BUPA_FRG0050_Create
    CRM_BUPA_FRG0050_GET_DETAIL
    CRM_BUPA_FRG0050_SAVE_COMMIT
    Regards
    Jay.

  • Capture Video FCExpressHD 3.0.1-General Error

    I have an iMac G5 pre intel with 2.5 gb or Ram, My camera is a Panasonic DVG60 it has been capturing video fine until today ( 30 hrs) It is now giving me a GENERAL ERROR when I try to capture video. I can capture files in iMovieHD OK, and import them to FCE, but I need the timecodes to edit as when I shot I recorded specific timecodes and it is 1 1/2 hrs worth of video to edit. I have reinstalled FCE 3.0.1 and still no correction. I also tried to as a suggestion on this group said take out the receipts to QT 7. and I did still no go.

    This article is for FCE2 but it works for FCE3 as well:-
    http://docs.info.apple.com/article.html?artnum=93690
    Ian.

  • If..then..else statement in SQL with 'generalized' conditions in the if sta

    it is possible to write something approaching an if..then..else statement in SQL with 'generalized' conditions in the if statement.
    Attached is the query for the payment register, in which I've written a series of decode statements, one for each possible value of the payment code. The query works OK - however, its specific and as the number of paycodes expand (and they do), the report won't pick up the new paycode until the code is changed. More importantly, the report won't be correct until someone 'discovers' that a paycode is missing, which might take months.
    If I were writing the equivalent of this series of decode statements in Focus, it would be something like this:
    DEFINE.......
    PAYMED/D12.2 = IF PAYMENT_CD LE 18
                   THEN PAYMENT_AMT
                   ELSE 0 ;
    PAYIND/D12.2 = IF PAYMENT_CD GE 19 AND PAYMENT_CD LE 49
                   THEN PAYMENT_AMT
                   ELSE 0 ;
    PAYEXP/D12.2 = IF PAYMENT_CD GE 70
                   THEN PAYMENT_AMT
                   ELSE 0 ;
    PAYREC/D12.2 = IF PAYMENT_CD GE 50 AND PAYMENT_CD LE 69
                   THEN PAYMENT_AMT
                   ELSE 0;
    END
    IN SQL/PLUS:
    SELECT ACCOUNT_NAME,
    LOCATION_1,
    CLMNT_LAST_NAME,
    CLAIM_NBR,
    DATE_OF_INJURY,
    DATE_CHECK_REGISTER,
    PAYEE_NAME_1,
    PAYMENT_CD,
    SERV_OFC,
    CPO_CHECK_NBR,
    PAYMENT_FORM,
    DECODE(PAYMENT_CD, 20, PAYMENT_AMT, 21, PAYMENT_AMT,
    22, PAYMENT_AMT, 23, PAYMENT_AMT, 25, PAYMENT_AMT,
    26, PAYMENT_AMT, 27, PAYMENT_AMT, 28, PAYMENT_AMT,
    29, PAYMENT_AMT, 30, PAYMENT_AMT, 31, PAYMENT_AMT,
    32, PAYMENT_AMT, 33, PAYMENT_AMT, 34, PAYMENT_AMT,
    35, PAYMENT_AMT, 36, PAYMENT_AMT, 37, PAYMENT_AMT,
    39, PAYMENT_AMT, 40, PAYMENT_AMT, 41, PAYMENT_AMT,
    42, PAYMENT_AMT, 43, PAYMENT_AMT, 44, PAYMENT_AMT,
    45, PAYMENT_AMT, 46, PAYMENT_AMT, 47, PAYMENT_AMT,
    48, PAYMENT_AMT, 49, PAYMENT_AMT, NULL) INDEMNITY,
    DECODE(PAYMENT_CD, 0, PAYMENT_AMT, 1, PAYMENT_AMT,
    2, PAYMENT_AMT, 3, PAYMENT_AMT, 4, PAYMENT_AMT,
    5, PAYMENT_AMT, 6, PAYMENT_AMT, 7, PAYMENT_AMT,
    8, PAYMENT_AMT, 9, PAYMENT_AMT, 10, PAYMENT_AMT,
    11, PAYMENT_AMT, 12, PAYMENT_AMT, 13, PAYMENT_AMT,
    14, PAYMENT_AMT, 15, PAYMENT_AMT, 18, PAYMENT_AMT,
    17, PAYMENT_AMT, NULL) MEDICAL,
    DECODE(PAYMENT_CD, 70, PAYMENT_AMT, 71, PAYMENT_AMT,
    72, PAYMENT_AMT, 73, PAYMENT_AMT, 74, PAYMENT_AMT,
    75, PAYMENT_AMT, 76, PAYMENT_AMT, 77, PAYMENT_AMT,
    78, PAYMENT_AMT, 79, PAYMENT_AMT, 80, PAYMENT_AMT,
    81, PAYMENT_AMT, 82, PAYMENT_AMT, 83, PAYMENT_AMT,
    84, PAYMENT_AMT, 85, PAYMENT_AMT, 86, PAYMENT_AMT,
    87, PAYMENT_AMT, 88, PAYMENT_AMT, 89, PAYMENT_AMT,
    90, PAYMENT_AMT, NULL) EXPENSES,
    DECODE(PAYMENT_CD, 50, PAYMENT_AMT, 51, PAYMENT_AMT,
    52, PAYMENT_AMT, 53, PAYMENT_AMT, 54, PAYMENT_AMT,
    55, PAYMENT_AMT, 56, PAYMENT_AMT, 57, PAYMENT_AMT,
    58, PAYMENT_AMT, NULL) RECOVERIES,
    DECODE(PAYMENT_FORM, 'N', PAYMENT_AMT, NULL) NONCASH,
    DATE_FROM_SERVICE,
    DATE_THRU_SERVICE
    FROM &INPUT_TABLES
    WHERE &SECURITYCOND
    DATE_OF_PAYMENT BETWEEN :START_DATE AND :END_DATE
    ORDER BY LOCATION_1, CPO_CHECK_NBR
    As you can see, this is both much easier to write and covers the possibility of expansion of paycodes (expansions always fit in these defined ranges).
    My question is, then, is it possible to write something like this in SQL and, if so, could you give me some sample code? (I'm one of those people who learn best from looking at the code as opposed to a set of instructions)

    Here is one way you could do it.
    Create a table that has columns like:
    Payment_code varchar2(2),
    Effective_Date Date,
    Payment_type varchar2(20),
    Expiration_Date Date)
    Payment type for example could be
    I- indemnity
    M- medical
    R- recovery
    E- expenses
    Let the table name for example be PAYMENT_CODE.
    The select query would look like
    SELECT ACCOUNT_NAME,
    LOCATION_1,
    CLMNT_LAST_NAME,
    CLAIM_NBR,
    DATE_OF_INJURY,
    DATE_CHECK_REGISTER,
    PAYEE_NAME_1,
    PAYMENT_CD,
    SERV_OFC,
    CPO_CHECK_NBR,
    PAYMENT_FORM,
    DECODE(p.payment_type,'E',PAYMENT_AMOUNT,0) expenses,
    DECODE(p.payment_type,'I',PAYMENT_AMOUNT,0) indemnity,
    DECODE(p.payment_type,'M',PAYMENT_AMOUNT,0) Medical,
    DECODE(p.payment_type,'R',PAYMENT_AMOUNT,0) recoveries,
    DECODE(PAYMENT_FORM, 'N', PAYMENT_AMT, NULL) NONCASH
    FROM &INPUT_TABLES,
    PAYMENT_CODE P
    WHERE P.PAYMENT_CODE = SOMEINPUT_TABLE.PAYMENT_CODE
    and other conditions
    The idea is to group all the payment codes into a few groups to reduce the clutter. If there is ever a change to the payment code, you could modify the table and it will be reflected in your select query.

  • Some web pages come up blank, generally following a link, that have opened without issues in earlier FF versions. Pages open OK in IE8 and/or in Chrome. Have tried the cookies clearing etc as suggested elsewhere, without success.

    I'm running FF 3.6.8. Certain websites (no apparent pattern, no secure sites) come up blank (white screen), showing "Done" on the footer. It generally happens when clicking on a link in another web page but no login or similar is involved to get to the intended site. Have cleared the cookies and followed the advice for a similar issue stated elsewhere on the Help forum, to no avail. Have also not added any add-ons since that recent FF upgrade.
    The affected sites have come up without issues in earlier FF versions, and they do load in IE8 and in Chrome. A representative example is shown below. - Will appreciate any helpful comments and recommendations!

    "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"<br />
    "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"<br />
    <br />
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).<br />
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]<br />

  • Incoming calls bypass the general iphone lock

    Although I've set up the general lock on my IPhone 3G, incoming calls bypass the mechanism and make the phone accessible by anyone who picks it up. Is there a way to require a passcode for receiving calls....I want to block all access to my phone!
    Any help would be greatly appreciated.
    Message was edited by: chiroguy2pittsburgh

    You'll find that with the iPhone locked, an incoming call will not allow access to the phone, i.e. you can only answer and talk, not access the phone OS.

Maybe you are looking for