POSDM Issue: Unknown Store Number in workbench

Hi
We added a new store to POSDM. The site is setup in Retail. I added the site to POS Customizing but we are getting this error in the workbench "Unknown Store Number".
Also table /BI0/TPLANT does NOT show the site I added and saved in customizing.
*Please suggest ... *
thanks,
Ron

Did you check in RSA3?
Regards

Similar Messages

  • POSDM - Error unknown store number

    Hi ,
    I am trying to post sales transactions to POSDM . When I execut the task , I get the error message 'Unknown store number'.
    The store is available in 0PLANT and store settings are available in POS configuration. Please advice. Helpful answers will
    be given full points.
    Thanks
    JC

    Hi ,
    I am also facing the same problem.
    Did you get a solution for the same.
    Rgards,
    Lisa

  • POS DM: Unknown store number 1001

    Hi Experts,
    When i am posting transactional data from "POS" to "POS DM" and to "ECC and BI", i am getting an error of "Unknown store number 1001" in POS DM workbench "/posdw/mon0", the message no. of this error is - "Message no. /POSDW/CORE003". I have created the ports in BI in the WE21. I have also created the store 1001 as partner (type-KU) with the message types "WPUUMS and WPUTAB". The store master data is available in BI also. I am not getting why i am getting this error.
    One more thing, when i am checking the message types WPUUMS and WPUTAB which i have add in the Partner type KU-1001, i am getting a warning message "No Message Control entry for this entry". Does this related to this error.
    Please suggest.
    Regards
    Abhishek

    Hi Abhi Goel 
    You need to configure the store in the IMG transaction under "Store" options
    Erick

  • Unknown error number -42032 when loging to the store

    Hi, I recently registered with iTunes (this is my number one music/movie buying experience ;)), I successfully bought one movie, iTunes downloaded it without any problems, but since then I cannot either play the movie or buy anything else. I am getting the unknown error number -42032 whenever iTunes want me to log on...
    What could be the problem?
    Thanks a lot, Alice.

    Hi rob8up,
    How long ago did you speak to the techs? Have you given them (meaning Apple) enough time to rectify this issue? If not, chill out. If so, then we can't help you here. We are just users like you....
    You can send feedback to Apple via this link:
    http://www.apple.com/feedback/
    Cheers,
    GB

  • Unknown material number in POSDW

    Hi
    I'm trying to post data via idoc wpubon, i'm using the EAN number, in the pos workbench, the ean number is converted into the material number, but i'm getting the message 'Unknown material number' , ¿Why i have this error?.
    The 0material, 0rpa_mean, 0rpa_mearm are loaded...
    Thanks!

    Could it be a timing issue where the material number hadn't been created by the time you extracted the materials from the source system and was then created by the time to extracted the EAN?

  • SAP POS DM. Error: Unkown store number

    Hi all.
    Help me please. I have a problem: when i work in POS Workbench, i am getting the error
    ''Unkown store number" message no. /POSDW/CORE003.
    P.S I created store in 0PLANT and configurated it in /posdw/img -> Store settings.
    Tell me please: What am i doing wrong?
    Regards,
    Denis.

    Hi, Vikrant!
    Thank you for reply!
    I activated master data in 0Plant, but i still get the error.
    Regards,
    Denis.

  • When I start up FCPX 10.0.1, I get the following message "Failed to save. Unknown store type, format, or version."

    When I start up FCPX 10.0.1, I get the following message "Failed to save. Unknown store type, format, or version."

    Thanks, Andy. I checked, and it is formatted "Mac OS Extended (Journaled)".
    Michael

  • Issue with range number at VF02 when releasing to accounting

    Hi Gurus,
    We have an issue with the number range at VF02 when releasing the invoice to accounting.
    Error message is "For object RF_BELEG E178, number range interval 6A does not exist FBN1"
    But when entering tx-FB1N for Company code E178 , it is not clear where range interval 6A is set for number range assignment.
    Where is the range interval entered in sales so accounting document is generated?
    thanks,
    VL

    hi
    this is to inform you that
    please go to SNRO - give object RF_BELEG for company code E178 & maintain number ranges for 6A.
    you can do it in FBN1 also.
    there will be three push buttons
    maintain
    change
    display
    we need to maintain in MAINTAIN.
    before maintaining please verify whether number ranges for 6A has been maintained or not.
    please follow the steps and proceed this clears your issue.
    balajia

  • Issue with Total Number of SODs at user level.

    Friends,
    Quick question -
    We are using GRC 5.3 Production on NT 20003 server. and back end systems are ECC 6.0
    1.We added the Additional Role to one of the business users in ECC 6.0
    2.We ran the FULL synch after adding this role in backend.
    Issue : The total number of SODs did not change for users, even though the SODs for this business users did increase about 300.
    Locations of Screen
    Informer Tab ->> Risk Violoations.
    Analysis Type -> Users
    Does anyone has any idea how this numbers get interpreted?
    The Total number of Violations for permission should increase, if user level SOD gets increased, as per our understanding.
    PT

    It should be in below sequence -
    1. Full or incremental sync for user/role/profile
    2. Full or incremental batch risk analysis for role/user/profile
    3. Management report
    The view you see is management report, which is based upon above jobs. FIrst jobs does high level sync like user/role/profile addition/deletion etc. Second job actually does risk analysis. Third one fills up the management view. If your batch risk analysis was run on  Aug 30 aug 10 and management report after completion of the same, the report will show the same data till you run these jobs again even there are many changes in backend authorization.
    Hope it clarifies your query.
    Regards,
    Sabita

  • Confirmation should not be allowed till materials issued from store

    Hello friends,
    I have a production order in which one material is issued automatically by Backflush function in confirmation and other material is issued manually. I want that confirmation must not be happen till materials are issued from store.
    Waiting for reply!
    Thanks!

    HI
    Check these BAdis for your requirement:
    WORKORDER_GOODSMVT
    RM_BFLUSH_GOODSMVT
    also if working in REM then check REM profile for incorrect goods MVt in OSP2 and in Discrete check OPK4 with your oreder type for termination of incorrect goods MVt
    Check and revert
    Regards
    Anupam Sharma

  • How do I determine who is calling me.  An unknown phone number is calling me late at night?  I want to find out who it is.

    How do I determine who is calling me.  An unknown phone number is calling me late at night?  I want to find out who it is.

    Yes, yes, yes. I am well aware about your line of Verizon is "THE Phone Company". Unfortunately, everyone was not subscribed  to "THE Phone Company" back before "THE Phone Company" was broken up. Some people have lines which were not in existence and have never been subscribers to "THE Phone Company". There are new area codes and numbers since "THE Phone Company" was broken up. I was unaware Straight Talk, T-Mobile, Sprint, Time Warner Cable, MagicJack, etc... automatically provide ALL of the private information of their subscribers to "THE Phone Company" simply so these other companies can exist. I was unaware "THE Phone Company" required each and every phone provider in the US to gather information for the USER of a phone when that USER was not the account owner. I don't remember giving my 15 year old daughter's information to "THE Phone Company" when I opened up her line 5 years ago. Obviously I did, since "THE Phone Company" has it as you would lead us to believe. I wasn't aware "THE Phone Company" required someone opening an account with 10 lines to provide the private user information for each and every one of those lines. When I opened up my 4 line account, I only remember giving out MY information. I don't remember validating everyone on the account was related to me. I don't remember giving out the names/DOB/SS #/etc... for everyone using the phones on my account. That information must have simply slipped my mind.
    For what it is worth, I never said they didn't have information on "every single number coming and going" thru their system. That is not the information being requested, though. The OP wants to know the name of the person making the call. If Verizon, aka "THE Phone Company" does not gather information on all users of a 10 line More Everything account from the account owner, where exactly are they getting this information. Furthermore, if they don't even gather this information of their own subscribers, why would you expect they have this information on the subscribers to other phone providers? It is not required to open a 10 line account. They do not run credit checks on all the users. They do not require SS#s on all of the users. They only require this information on the account owner. Are they staking out the account owner and following him/her to determine who is using the phones on his/her account? I guess I am simply too trusting.
    You speak of "back in the way old days". Well these are no longer the "way old days". Lines on an account can be scattered all over the US. The users of these phones aren't necessarily and more often every day not even related. "THE Phone Company" doesn't necessarily and is UNLIKELY to know the identity of the majority of people using phones on an account. The account owner, yes. Everyone else, NO. People making a call are just as likely using an area code/phone number of a location they don't even physically reside. "Back in the way old days" this was much less commonplace.
    Yes, they MAY be able to get the name of a caller, but it would take time and COULD take a considerable amount of time depending on the cooperation of the account owner.

  • HT1349 My iPad is disabled. I have only just been able to find the serial number on the back of my product by using a magnifying glass but even now from "Support" I get an unknown serial number advice. How can I get into it?

    My iPad is disabled. I have only just been able to find the serial number on the back of my product by using a magnifying glass but even now from "Support" I get an unknown serial number advice. How can I get into it?

    Explain exactly what happended - disabled how - and why are you trying to read the serial number? So that you can use it on this site?
    https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • SAP Retail Store - Enter store number again -

    Hello all,
    We are implementing mySAP 2005 ECC6.0, as part of the implementation SAP Consultants recommended us to implement IDES (Solaris/Oracle) as our first "Picture of the new SAP". We are planning to use SAP Retail Store, in the IDES we just activated all the components in tx SICF and created the external alias (#918018, 762872, 763210), since we are using the integrated ITS, but every time we call the alias or “wosm” from the web, we get the same msg, "Enter store number again" and nothing comes from there, any clue? Advise?..
    Thanks in advance,
    Gonzalo.

    Hi,
    Pl check the following link which will provide relevant details:
    http://help.sap.com/bp_bblibrary/500/html/R34_EN_UK.htm
    Regards,
    S.V.ManiKumaar

  • I hve unlocked iphone and got walmart family mobile. I was issued a phone number initially with phone and then I had them change it. Now when I send texts caller id people see is the original phone number, and when I call it is the new number.

    I have unlocked iphone and got walmart family mobile. I was issued a phone number initially then asked for a different one. Now when I send text messages, they show up the original number, but when I make phone calls, the id shows up the new number, I can recieve text messages to both numbers. If you try to call the first number it says it is not a working number. On my phone, if I go under "about" it says "my phone number" and it says the second number, under settings, and messaging, it says that I send and recieve messages from the original one. T-mobile, has no idea why this is happening and has tried everything to fix it

    This is for iMessages only, not for text messages as in SMS/MMS.
    Settings > Messages > Send & Receive > Apple ID.
    Select your Apple ID and at the menu window that appears, select Sign Out.
    Turn iMessage off at Settings > Messages > iMessage.
    Then follow these instructions.
    You can remove an iPhone from your support profile by following these steps.
    Step 1: Click on this link to open the login window of your support profile.
    Step 2: Log into the website using your Apple ID – same as your iTunes login.
    Step 3: Click on the button ‘Edit products’ and select the iPhone that you want to remove from the list.
    Step 4: Click on the arrow behind the product, and then click on the button ‘Unregister’ to delete the iPhone from your support profile.
    After you unregister your iPhone, on your iPhone go to Settings > Messages > iMessage and turn iMessage on.
    Go to Settings < Messages > Send & Receive > Apple ID. Sign back in with your Apple ID.
    This should re-register your iPhone with your Apple ID with iMessage with the new phone number only.

  • Unknown port number or missing HTTP listener

    I try to make a Application Server Connection (with JDeveloper), but I get the message "unknown port number or missing HTTP listener". Could anybody tell me how could I fix the problem ? More details will be appreciated because I have no background in Oracle AS.
    Thanks. Paul

    OAS and JDeveloper: 10.1.2 I used the host name.
    Can anybody tell me, What "Remote Server's Oracle Home Directory" does it mean ? I have many Oracle Home on my computer (for infrastructure, for middle tier, for Developer Suite, for Oracle database 10g installed alone).
    With the port 7778 (OC4J HTTP port) for I get the message: Test failed (404). Invalid servlet path :(
    I that a difference between OC4J HTTP port et HTTP port ?
    null

Maybe you are looking for