POSDM Monitor : /POSDW/MON0 Question

Hi All,
I have a very simple question (I guess).
When "Process Tasks Online" for a POS transaction we get a popup window with the same title.
In the popup window we have "Processing Task" Drop Down List which shows all the relevant tasks. My question is how can I control the which tasks should be displayed in that drop down window.
My understanding so far has been that the display of tasks depends on the combination of Tasks and there tasks groups defined under /POSDW/IMG->Tasks->Tasks for Task Group. Pl advice how this drop-down display of tasks is controled.
Another related question is the check box "Take Account of customizing Tasks" on the "Process Tasks Online" window. What is the purpose of this check box? I found that when I select it I get a complete list of tasks.
Any inputs will be really appreciated
Thanks in Advance!
S

Thanks for Syed's help.
The POSDW system was setup by consultants. I don't know about DSO or infocube. Can you recommend one book for this?
I'm reading /POSDW/CL_MON_CALL class in function builder(SE80)
Thanks.

Similar Messages

Event Monitor on Linux question

We are currently running NSM 2.0. The engine is version 2.00.37 running on a NetWare 6.5 sp7 server. The two event servers are version 2.00.15 running on NetWare 6.5 sp7 servers. We are needing to decommission the two servers that are our current event servers and replace them with SLES. No plans are in place to upgrade the server running the NSM engine. I see from the documentation that we will need to upgrade NSM to 2.5 in order to run the event servers on SLES. The documentation states "installing the NSM Event Monitor for Linux requires OES2-SP1 or SLES 10 SP2." The directions then go on to state how to install on a OES2 box. Do you have to install the event monitors on OES2? Will the event monitors run on SLES 11?
We already have 64 bit SLES 11 systems in the partition and would like to use these instead of installing more servers if possible. If we need to install OES2 servers, is it OK if they are virtual?

I guess I am a little confused. We have SLES 11 boxes with eDirectory 8.8.5 sp4 installed. These servers also run LDAP and hold read/write replicas of the partition the users reside in. Why do I need to run OES2 to monitor eDirectory events?
Originally Posted by NSRDevelopment
The main purpose of the event monitor is to monitor edirectory replicas for events. If there are no replicas where you install event, it can be configured to monitor replicas on another server. The event monitor will probably run on SLES 11 (not officially supported), but you will have to configure it to monitor a server with edirectory replicas via LDAP, which requires OES 2 (SP 1 or SP 2.) There is no problem installing on a virtual server.
NSM Support and Development
>>> stephayers<[email protected]> 8/17/2010 4:29 PM >>>
We are currently running NSM 2.0. The engine is version 2.00.37 running
on a NetWare 6.5 sp7 server. The two event servers are version 2.00.15
running on NetWare 6.5 sp7 servers. We are needing to decommission the
two servers that are our current event servers and replace them with
SLES. No plans are in place to upgrade the server running the NSM
engine. I see from the documentation that we will need to upgrade NSM to
2.5 in order to run the event servers on SLES. The documentation states
"installing the NSM Event Monitor for Linux requires OES2-SP1 or SLES 10
SP2." The directions then go on to state how to install on a OES2 box.
Do you have to install the event monitors on OES2? Will the event
monitors run on SLES 11?
We already have 64 bit SLES 11 systems in the partition and would like
to use these instead of installing more servers if possible. If we need
to install OES2 servers, is it OK if they are virtual?
stephayers
stephayers's Profile: NOVELL FORUMS - View Profile: stephayers
View this thread: Event Monitor on Linux question - NOVELL FORUMS

Ultimate 3B Monitoring Prorated Upgrade Questions!?

I recently enrolled in the 3 Credit Bureau Monitoring for $24.99/Month on June 24 (almost 3 weeks ago). I got a message at the bottom of my Dashboard saying I could upgrade to the 3B Ultimate at a prorated price, since it hasn't been a month. It says you get a fresh report from all 3 Credit Bureaus quarterly, which is worth the extra $5/month for me, so I am going to do it here in the next 24-48 hours.... But my question is will it provide a "newer" or more accurate score than what I already have? It says that they have to pull the information again, and my score has been on a great climb in the 3 weeks I've been enrolled. I've got some things that haven't updated on Transunion FICO, but have on the other 2. Any help/experience is greatly appreciated!

Just want to give an update. It's been about 1 week and I've had no problems. Signing in and out of Win 7 is very fast. Much better than with XP. Even though I have a slower hard drive with Windows 7 (5400 RPM) vs Windows XP (7200 RPM), Windows 7 is faster. Startup time is about the same, but shutdown is a lot faster, just like signing and out and logging in and out.
Wireless LAN (WLAN) configuration was painless and has worked well. It automatically reconnects when I boot and does not drop my connection when i stay logged in but switch users (this happened to me on XP with the IBM Access software).
It has been well worth the upgrade so far.
Systems I use: T42P, T61P, Y510, A600

Dual monitor, and other questions....

I'm sorry for these questions if they've already been discussed... with all the back lash, I'm having a hard time wading through all the comments.
I have a macbookpro.
I use an external 24" monitor along with my 15" laptop for editing. My 15" is used for my canvas.
1: Can I use this set up with the new FCP X?
I use PPro CS5 currently and I like the way it handles media and saving my projects.
2: How does FCP X handle media?
2.a: Does it handle media like iPhoto / Aperture?
2.b: Are projects saved like in iMovie?
I keep all my media on external hard drives.
3: Will this be a problem with FCP X?
Thank you in advance for your help.
Tony

On my dual monitor Mac pro, the main monitor has the timeline and canvas. The second monitor has the events I think, basically the bin. You'd probably want to make your 24 the main monitor
FCP X handles media and projects a lot like iMovie. iTunes and iPhoto are accessed just like iMovie. You can save media to whatever drive you want although you can't really drill down to a particular location
Hope this helps

Bridge Dual Monitors CS3 Workspace Questions

I can't seem to figure out a few things regarding running dual monitors. Run windows XP, have the latest bridge/cs 3 updates. Sometimes everything works fine, other times it doesn't.
I like having my preview pane on monitor #1, directly in front of me. I also like opening the selected photo in RAW from monitor #1 and having the RAW window come up on monitor #1.
Most often the RAW window will open up on Monitor #2, which I do not want to happen. On Monitor #2, I have my content pane and my metadata & folders showing.
I've reversed 1:2 and 2:2 and can't get it to work right either. Could someone provide some guidance? Been searching options and can't figure it out.
Another topic that is not related to dual montiors. Sometimes my preview tab, will not show the selected photo in it. I usually reset Bridge on start up and it'll be there...but sometimes the photo disappears. The tab will still be there. Any help/ideas would be appreciated.
Thank you.

I discovered that with dual monitors if the window is maximized it has no preview image (default workspace), just a green pane. If you use the double headed arrow and pull back the dividing line between thumb/preview pane or preview/metadata pane it revels dozens of "copies" of underneath. The preview will only show up when the thumb window pane is moved quite a ways to the left. It is almost like the real workspace is on the bottom and the others are on top.
The solution I have found is to click RESTORE DOWN (middle window icon) and then everything works correctly, even if I enlarge the window to full monitor. If I maximize it reverts again. Am using Vista and 2 monitors. Can work with this now that I know what to do, but a little puzzling. For anyone not seeing a preview image, or metadata, might be worth while to see if maximize window mode is the problem.
Perhaps you could experiment with maximize - restore down and see if it helps with your problem.
Probably get a better response if you post questions in Bridge question forum rather than feature forum.

Modify the data in POSDM table /POSDW/TLOGS

Hi Experts,
I'm looking for a way to modify the data in table /POSDW/TLOGS ,
I've Modified the Totals Data by updating column "TRANSTURNOVER"
this modified the totals ,
now i need to modify the line item and articles values ,
any advice will be appreciated and rewarded .
Thanks ,
Mohamed

This is a question for OSS.
Rob

Newbie FCP HDV monitoring and RAID questions

Hello forum gods.
First off, I must confess - I am a defector seeking assylum in the the Mac camp. I am a born-and-bred Windows person, and a longtime Avid editor who just made the jump and purchased the Mac-Pro with all the bells and whistles, and FCP Studio. I did this to accompany my JVC ProHD cam and deck.
I have no idea what I am going to do with the time I used to spend scanning for viruses and trojans. I am thinking I may write a novel, or build a house by hand - but that is another topic.
Now that the confession is out of the way - we can move on to the actual questions.
<big breath>
Ok - so I have this new fancy shiny computer, deck, camera, and monitors - one of which is the Sony 23" that is comparable to the Apple 23. I do not have a Kona or Blackmagic card because I was told that I did not need one right away - though I do plan on getting one later. For monitoring, I was going to use the firewire in/out of the JVC deck and convert the signal via the component outs to another HD monitor. This would bring the total monitors on the system to 3 - a 19" for the edit screen, the 23" for the video playback in FCP and the braodacast HD for monitoring the final signal.
Is this workable?
Now for the second question - storage and RAID.
Most of my footage will be either SD or HDV. Eventually I'll be going to XDCam, but that's a bit down the road. I have the internal 250 gigger that came in the Mac, and I purchased additional 500gb SATA II drives that I was going to use to set up a RAID. Should I do this internal or external? Will it work? What else do I need? What is the meaning of life?
Thanks for your replies. My credit card is anxiously awaiting your suggestions
G5 Quad Mac OS X (10.4.8)
G5 Quad Mac OS X (10.4.8)

Some question back atcha:
1) When you say you'll be working in SD, what do you
mean? Typically, SD refers to uncompressed 601, 720 X
486. Or are you referring to DV NTSC?
DV NTSC and/or the myriad formats that the JVC100 can do.
2) Your Profile says you have a Quad G5, but your
post says it's a MacPro. Which is it?
Sorry - Consider that my first public gaffe in the new Mac world. I bought the Mac Pro. Time to change my profile. I bought it last week - it isn't even here yet. Supposed to be delivered today...
3) Are you wanting to see your HDV sequence on a
external video monitor while you're editing? If so,
you'll need the Kona card (or the Blackmagic card,
but I don't do BMD, only Aja, so I don't know about
the Blackmagic offerings.)
I've read about the Cinema Preview function and although I know that this isn't the best idea for monitoring, wouldn't it work? On the JVC deck, it has the firewire output/input and component outs (among others) so in E-to-E mode, couldn't the deck act as my converter for monitoring on the broadcast monitor? If not - I have a line on a Kona-2 with the BOB for about $1400. Deal or no deal?
Now as for your RAID question, you can do either
internal or external. Just don't include the drive
that contains your system folder in the RAID.
I was planning on using the 250 for all my system files and the 2-500 giggers as my edit drives. Sound good?
EDIT: As for the meaning of life, go ask your father.
Gaah... He handed me "The Hitchiker's Guide to the Galaxy" and told me to get to reading....
Thanks for the help. Lord knows I need it.

T61 External Monitor Port Failure Question

I have a Lenovo T61 8897-cto (purchased 4/2008) with what I believe is a failing backlight. In dim environments I can still see the screen. I've been temporarily using an external monitor, but the external monitor just went blank and I can't get it back, (the external monitor works fine with another laptop which I'm using now). My question is, does this new fault point to a system board failure? I suppose it could be a connector but I don't move the system often and not recently. The only other things that comes to mind is that the battery is dying and only has 50% of its capacity left, (but I always run it with the AC cable plugged in).
I'm just wonder if it is worth putting any money into this laptop or to parts it out. I've already ordered a replacement W510 which I should get in under 2 weeks. I was thinking about using the T61 as a backup or dedicated to Ubuntu, but I can buy a used one for under $600 so I don't want to dump $400 into to have it repaired.
Any suggestions/prior experience with failing LCD displays and external video port?

1400x1050 is the highest screen resolution, so I guess that is SXGA+ No, I've never spilled anything on the laptop. I'm running Windows Vista Pro latest Service Pack. I rebooted the system this morning and the external display was detected and used during the boot process. It started to work again under Windows. I'm starting to think that it was some sort of power saving mode that failed to re-initialize. The main laptop screen is still dim, but readable in a dark room. It does have a bit of a tint to it, which I've read is an indicator of a failing backlight. I've checked the warranty on the Lenovo website and they've indicated that it has expired.

Monitor Quality in Question

Hi-- I love my imac G4 17in except for the display, especiallly the text. Seems to have a shadowy effect, not that crisp. I recall several people feeling the same way on these boards a few yrs ago when i purchased it. My question is has apple improved the monitor quality with the new iMacs? Thanks

Manual and user guide:
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&dlc=en&lc=en&product=5203203
*** Say 'Thanks' with Kudos ***

Monitor LED backlight question?

I just bought a W2071d Monitor, and was wondering how I can turn Off the LED backlight feature...
Also, How can I get a copy of the Manual for the Moniter. I don't like the CD...
This question was solved.
View Solution.

Manual and user guide:
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&dlc=en&lc=en&product=5203203
*** Say 'Thanks' with Kudos ***

Monitor to TV question

Can you find a converter that will take you monitor and plug it into a cable TV box? So that you can watch TV on your monitor?

If the cable box has component video output, you can use a scaler to convert it to 1920 x 1200 DVI
<http://www.gefen.com/kvm/dproduct.jsp?prod_id=5282>

Activity Monitor processes - a questionable one

I looked on Activity Monitor on All Processes and saw something I thought was strange. Under the process mdimport there is a User named "nobody" and it is right below the mdimport with my user name. it has 3 threads devoted to it but it doesn't look like it is doing anything. First off what is mdimport and why is there a user named nobody on my comp, is that a standard process on Mac OS 10.4.6? ( I'm paranoid now that this is someone hacking my computer) please respond as soon as you can. thanks.
iBook PowerPC G4 1.07 GHz Mac OS X (10.4.6) 100 GB HD, 768 MB DDR SDRAM, 32 MB VRAM, Superdrive, AirPort Extreme

The mdimport process is used by Spotlight to index files. It runs as the nobody user so that it can't index anything in areas restricted to the system or the accounts you've created on the machine. Mac OS X creates several user accounts for system-level tasks when it is installed, and these crop up from time to time. Your system is not being hacked.
(18539)

Monitoring Template Creation question

Hello,
I have created a Monitoring Template (T1) by performing a "Create Like" of the Standard Oracle Database Instance template. Unfortunately the Standard Oracle Database Instance template does not have all of the metrics that I need to check.
Is there a way to create a Monitoring Template based on "All Metrics" for the DB Instance? (It appears that I can only create a monitoring template based on a target database)
If not, how can I pick a particular metric from the "All Metrics" list and add it to a template?
Thanks,
Bob Larsen

When creating a Template based on a Target, you actually wll get all available metrics. You could also use the Oracle proved template to copy from.
You should realize that when looking at All Metrics, several of these metrics are "Non threasholdable" meaning that you simple can not set a threshold value.
Regards
Rob
http://oemgc.wordpress.com

Activity monitor Page Out question

Is there a way to get Page Outs to report the number of page outs rather than bytes ?
And when did this change, as it used to report in # of pages.... I think in 10.5

Sorry, but that cannot be changed. If you want a better report of that information then open the Terminal and enter: top then press RETURN. Top's information is more complete than what is reported in Activity Monitor. Also see:
About OS X Memory Management and Usage
Reading system memory usage in Activity Monitor
Memory Management in Mac OS X
Performance Guidelines- Memory Management in Mac OS X
A detailed look at memory usage in OS X
Understanding top output in the Terminal
The amount of available RAM for applications is the sum of Free RAM and Inactive RAM. This will change as applications are opened and closed or change from active to inactive status. The Swap figure represents an estimate of the total amount of swap space required for VM if used, but does not necessarily indicate the actual size of the existing swap file. If you are really in need of more RAM that would be indicated by how frequently the system uses VM. If you open the Terminal and run the top command at the prompt you will find information reported on Pageins () and Pageouts (). Pageouts () is the important figure. If the value in the parentheses is 0 (zero) then OS X is not making instantaneous use of VM which means you have adequate physical RAM for the system with the applications you have loaded. If the figure in parentheses is running positive and your hard drive is constantly being used (thrashing) then you need more physical RAM.

External Monitor in Bootcamp question.

Hi All! For the life of me, I cannot get my LG display to run dual with my macbook pro retina in windows 7 bootcamp.
I have installed every driver with no luck. HDMI, nor thunderbolt>DVI are even recognised. Windows doesnt even recognise the display at all in control panel. Yet my thunderbolt >DVI connection works flawlessly when im in iOS
Has anyone solved such an issue with their bootcamp?
None of the help ive read so far has helped me with this issue.
I have a 15" Macbook pro Retina with all latest updates and bootcamp software running...

yeah
u can

POSDM Monitor : /POSDW/MON0 Question

Similar Messages

Maybe you are looking for