POSDM TIBQ entries in error status

Hi POSDM experts,
We have set up jobs to pick transactions from inbound queue for every 5 mins using the program /POSDW/INBOUNDDISPATCHER. We noticed that certain queues ran into status /posdw/tibq-recordstatus = 2 (error). We can identify the queues in error using /posdw/qmon. (Please be informed we have changed the frequency of the job, it does not matter).
We tried to check for the logs pertaining to the program and found no information. If the queue in error is processed, it is successful and can see the details of the transactions in workbench.
Can you please let us know how to identify the information why they ran into error? Hence determine the fix and avoid the issue.
Thanks,
Suraj Pabbathi

Hi Aram K,
Your reply helped me to pin point the error log. However when you look into the issue, it says "Errors Occurred during processing for store 97", followed by locked by user BTCBUS.
Is it transaction locked by batch user (BTCBUS) is the error or there are different errors occurred during processing for store 97? If there are different errors, this transaction is not giving those errors.
If the transaction is locked by batch user, why it should land into error? Should it not process those transactiosn? FYI.. we have set up job to process the transactions every 5 mins.
Thanks,
Suraj Pabbathi

Similar Messages

ECC 6.0 - Leave request show duplicate entries one with ERROR status

Dear All,
We have implemented standard Leave request process, we are facing the issue as mentioned below, Its not happening for all the time, however we want to what scenario this problem will arrives.
Problem description:
E.g. Staff applied annual leave on 10.06.2010, the leave request will sent for approval , after the approval of the leave ,every 30 min. we have scheduled a job which will execute standard program RPTARQPOST to post a leave request to IT2001.
After the approval when staff go into ess and see leave request details under "Show Overview of Leave" and its shows as 2 records for the same period one with APPROVED and another one with ERROR.
Type of Leave From TO Status Used
Annul

Hi Annul,
Please check SAP Note 986003 - ESS LEA: Incorrect ERROR status for records in RPTARQPOST.
May be relevant for your case.
Regards,
Dilek

Message has error status on outbd side

Hi,
I am doing File to IDoc scenario, in SXMB_MONI i am getting the following error "Message has error status on outbd side". I am not using BPM and this interface was working fine earlier .
Any clues!!!!!!!!!!
Regards
Swatantra

Hi Vijay,
Cross check whether you have done these:-
SLD-
1) Create a Product/Software Component
2) Technical System pointing to R/3 system
3) Business System for the above technical system
In the Repository
1) Import the Software component created in the sld
2) Create a namespace,
3) import the idoc and then create sender data type/message type etc and mapping
4) Mapping Rules is depends on the requirement
In the Directory
1) Create a Scenario /import the business system
2) Create Receiver/Interface determination
3) Create communication channels for sender and receiver
4) Sender Agreeement and Receiver Agreement.
Then the file adapter configuration is depend on the input file format.
Also you need to have Logical destionation created in the XI , and the IDX1 entry
In R/3 Port, Partner profiles etc should be created
Have a look into this document~
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/877c0d53-0801-0010-3bb0-e38d5ecd352c
While doing an File -> XI -> IDoc scenario, The Points to noted are:
1. You dont need a DT, MT or a message interface for the IDOC as it itself acts as the Message Interface.
2. You import the IDOC and use the same in your mapping.
3. In this configuration note that you will need a sender agreement for the file.
4. In this configuration note that you will also need a receiver agreement for the IDOC.
For any File -> XI -> IDoc scenario ref:
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
Hope this helps.
Regards.
Praveen

Message has error status on outbd. side (error in Moni)

Hello All,
Iam doing soap to idoc scenario, the scenario was working fine since long time....but yesterday we had an issue...we can see the message was sucessfully processed in XI monitor and RWB, but idoc not got created in sap ecc system.
when i checked in moni one column called Outbound status is in error status and the error is message has error status on outbd. side.....i checked the idx1, idx2,sm59......all settings are fine.
How to reslove the issue, please help me.
Thanks and regards,
Chinna

Hi
Please check the below i think your problem will solve
Hi,
Check whether IDoc was created:
1. Execute Transaction WE05; enter correct date/time parameters etc. If IDoc found in failed status, open status records folder and double click on the failed status records to get error message.
Check Whether IDoc is received by the Receiver:
2. Execute Transaction WE05; enter correct date/time parameters etc and verify if the IDoc was created or not and if IDoc is in a successful status or not. If the Idoc is in Status-30(Yellow), you can push it again through Transaction BD87.
3. If the IDoc is located and status is successful but receiver has not received the IDoc, Execute transaction SM58 to determine if IDoc is stuck in the ALE/RFC layer. If entries exist in SM58, look for Message Type
4. If message type exist and Run the Program "RSARFCEX". If after the RSARFCEX program has ran and IDocs are not in SM58, issue should be solved. Validate in receiving system via WE05 that the IDoc was received or not.
5. If IDoc is still stuck in SM58, check RFC connection. Go to SE37, enter function module RFC_PING. We need to have access to SM59 to test the RFC Connection.
6. After an issue has been resolved and/or you need to process an IDoc, besides processing IDocs via programs, you can also process IDocs via Transaction BD87.
Thanks ,
Meeravali Dudekula

Error status on outbound side

Hi experts,
I am in JDBC to IDOC scenario and right now i face following error in SXI_MONITOR (black and white flag in status field BUT Red flag in outbound status):
"Message has error status on outbound side"
This is a heavy interface (up to 8MB) but, in the past, we did not receive this error. I saw that there is an entry in SM58 from the PIAFUSER that says "Lock table overflow"
Thus, I set the parameter enque/tablesize up to 8192 MB but after restarting the system it did not work either, a new entry in SM58 is shown.
If i analyse the runtime tab of the response of the message i can see
<SAP:AdapterStatus>007</SAP:AdapterStatus> --> for an erroneous interface execution (payload=7,2MB)
<SAP:AdapterStatus>006</SAP:AdapterStatus> --> for a successful execution (payload 6.5 MB)
Can anyone plz, help me on this?
I cannot explain why we did not face this in the past.
Can you please explain how the lock table works? and what does the overflow means?
Thanks a lot in advance and best regards,
David

Hi Sai,
Ive checked what you mentioned but cannot see the point there. Maybe you can help me:
Enqueue Operations 847
rejected 17
Error occured 0
Dequeue Operations 604
Error occured 0
Dequeue All Operations 661
Cleanup Operations 0
Backup Operations 1
Read Operations 21
Compress Operations 0
Verify Operations 0
Records written 58408
to the backup file 2
Maximum Number of Lock Owners 58406
Maximum Fill level 4
Current Fill Level 0
Maximum Number of Lock Arguments 58406
Maximum Fill level 14
Current Fill Level 0
Maximum Number of Lock Entries 58406
Maximum Fill level 14
Current Fill Level 0
Update; Fill Level at Maximum 1
Current Fill Level 0
Time in Lock Table /Seconds 0.073970s
Wait for Lock Table /Seconds 1.691441s
Time in Lock Server /Seconds 0.000000s
Besides, i dont think it is gonna be a matter of disk spaces as all of them have, at least, 3.0 Gb of free space.
Any other clue? I increased the enque/table_size up to 65 MB and the lock table overflow in SM58 still remains!!!
Thanks a lot and best regards,
David

Zone shutdown error - SNMP request returned error status 6 (no access)

When trying to shutdown a zone though SunMC it get the following error from the web page
SNMP request returned error status 6 (no access) snmp://xx.xx.com:nnnn/mod/scm-container/Zones/ZoneTable/ZoneEntry/zoneState#zonename
the log on the agent has
[0000008f 00a8 ]warning Nov 28 12:20:10 agent preValidateSetPDU: zoneState(zonename) [1.3.6.1.4.1.42.2
.12.2.2.85.6.1.1.10.10.98.111.116.97.110.105.120.45.97.100] - noAccess
I probably am missing a simple undocumented permissions problem.
Any help would be appreciated
Thanks

marcusj99 wrote:
When trying to shutdown a zone though SunMC it get the following error from the web page
SNMP request returned error status 6 (no access) snmp://xx.xx.com:nnnn/mod/scm-container/Zones/ZoneTable/ZoneEntry/zoneState#zonename
the log on the agent has
[0000008f 00a8 ]warning Nov 28 12:20:10 agent preValidateSetPDU: zoneState(zonename) [1.3.6.1.4.1.42.2
.12.2.2.85.6.1.1.10.10.98.111.116.97.110.105.120.45.97.100] - noAccess
I probably am missing a simple undocumented permissions problem.
Any help would be appreciatedSCM security can be tricky to get right the first time you use it. Have you performed these operations in the global zone?:
- run es-config to add your SunMC userID to the scm-container ACL?
- made sure the Project Managment and Pool Management entries are in /etc/security/prof_attr and exec_attr files?
- added your SunMC userID to the Zone/Pool/Project entries in /etc/user_attr (or used the 'usermod' command to add the entries for you)?
If any of those steps were missed then SunMC (or Solaris) may not believe you have permisson to make changes to zones/pools etc. There are a couple of SCM docs listed in with the SunMC doc set:
http://docs.sun.com/app/docs/coll/810.8?l=en
Regards,
[email protected]
http://www.HalcyonInc.com
New !! : http://forums.HalcyonInc.com !!

G/Laccounts IDOCS error status 29

Hi all,
I transfer G/L accounts from a sap source system to another sap system, using transaction BD18 and message type GLMAST.   for some of the general ledger accounts , it works very well.
however, half of my accounts have a functional area (FUNC_AREA).
when I send these accounts , I have the status 29 : error in ALE service: and the error is F5 162   , "business area & is not defined " . I have no business area in my accounts , the value "business area" is filled with the beginning of the value FUNC_AREA !
What does means the error status 29 ? is it really a "Missing or Incorrect Partner Profile" ? In WE20 (configuration of partner profile), in my source system I have GLMAST for outbound parameter , and in my reception system, I have GLMAST in the inbound parameter, this is the standard and should be correct ... What do I have to do in order to correct this status ?
Does anyone have any ideas? Thanks in advance.

Hi sabine,
Your configuration should like below.
A -- Sending SAP system
B -- Receiving SAP System
In A ,   go to we20.
Click on system B( Partner type LS).
Now in "Outbound parameters" , your entry should be maintained.
Thanks
Jitendra

MP Installation success or error status: 1603.

Hi guys,
I try to install MP role on a new sccm 2012 server. Setup failed, I try:
- Remove the MP as a site system role (if it is still installed), wait for it to finish
 - Remove IIS completely
 - Reboot the server
 - Stop the Task Scheduler Service
 - Rename the %windir%\Tasks folder to something else (or move it)
 - Start the Task Scheduler Service (this will recreate the %windir%\Tasks folder)
 - Reinstall IIS, BITS, WebDAV
 - Insure BITS and WebDAV are enabled
 - Reinstall the MP
but still failed.
mpsetup.log
<09/10/14 13:49:33> SMSMP Setup Started....
<09/10/14 13:49:33> Parameters: D:\SCCM_App\bin\x64\rolesetup.exe /install /siteserver:HCVX382 SMSMP 0
<09/10/14 13:49:33> Installing Pre Reqs for SMSMP
<09/10/14 13:49:33> ======== Installing Pre Reqs for Role SMSMP ========
<09/10/14 13:49:33> Found 2 Pre Reqs for Role SMSMP
<09/10/14 13:49:33> Pre Req MSXML60 found.
<09/10/14 13:49:33> No versions of MSXML60 are installed. Would install new MSXML60.
<09/10/14 13:49:33> Enabling MSI logging. msxml6_x64.msi will log to D:\SCCM_App\logs\msxml6_x64MSI.log
<09/10/14 13:49:33> Installing D:\SCCM_App\bin\x64\00000409\msxml6_x64.msi
<09/10/14 13:49:33> msxml6_x64.msi exited with return code: 0
<09/10/14 13:49:33> msxml6_x64.msi Installation was successful.
<09/10/14 13:49:33> Pre Req SqlNativeClient found.
<09/10/14 13:49:33> SqlNativeClient already installed (Product Code: {3965C9F9-9B9A-4391-AC4B-8388210D3AA0}). Would not install again.
<09/10/14 13:49:33> Pre Req SqlNativeClient is already installed. Skipping it.
<09/10/14 13:49:33> ======== Completed Installation of Pre Reqs for Role SMSMP ========
<09/10/14 13:49:33> Installing the SMSMP
<09/10/14 13:49:33> Passed OS version check.
<09/10/14 13:49:33> IIS Service is installed.
<09/10/14 13:49:33> No versions of SMSMP are installed. Installing new SMSMP.
<09/10/14 13:49:33> Enabling MSI logging. mp.msi will log to D:\SCCM_App\logs\mpMSI.log
<09/10/14 13:49:33> Installing D:\SCCM_App\bin\x64\mp.msi CCMINSTALLDIR="D:\SMS_CCM" CCMSERVERDATAROOT="D:\SCCM_App" USESMSPORTS=TRUE SMSPORTS=80 USESMSSSLPORTS=TRUE SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=0 CCMENABLELOGGING=TRUE
CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1
<09/10/14 13:50:23> mp.msi exited with return code: 1603
<09/10/14 13:50:23> Backing up D:\SCCM_App\logs\mpMSI.log to D:\SCCM_App\logs\mpMSI.log.LastError
<09/10/14 13:50:23> Fatal MSI Error - mp.msi could not be installed.
<09/10/14 13:50:23> ~RoleSetup().
mpmsi.log
OBJ:SMSMP_StateMessages,8180,8181,novice,0
CTR:TotalReceived,8182,8183,65536,novice,0
CTR:TotalRejected,8184,8185,65536,novice,0
CTR:ProcessedPerSecond,8186,8187,272696320,novice,0
APP:SmsMPInventory,D:\SMS_CCM\mpperf.dll,1033|d:\sms_ccm\1033\mpres.dll
OBJ:SMSMP_DdrMgr,8080,8081,novice,0
CTR:FailedReports,8084,8085,65536,novice,0
CTR:RejectedReports,8086,8087,65536,novice,0
CTR:TotalReports,8088,8089,65536,novice,0
CTR:TotalReportsPerSec,8090,8091,272696320,novice,0
OBJ:SMSMP_HinvMgr,8112,8113,novice,0
CTR:DeltaReports,8082,8083,65536,novice,0
CTR:FailedReports,8084,8085,65536,novice,0
CTR:RejectedReports,8086,8087,65536,novice,0
CTR:ReportSize,8092,8093,65536,novice,0
CTR:TotalReports,8088,8089,65536,novice,0
CTR:TotalReportsPerSec,8090,8091,272696320,novice,0
CTR:NOIDMIFGroups,8114,8115,65536,novice,0
OBJ:SMSMP_HinvRetryMgr,8116,8117,novice,0
CTR:FailedReports,8084,8085,65536,novice,0
CTR:NumberOfFiles,8094,8095,65536,novice,0
CTR:RejectedReports,8086,8087,65536,novice,0
CTR:ReportSize,8092,8093,65536,novice,0
CTR:TotalReports,8088,8089,65536,novice,0
CTR:TotalReportsPerSec,8090,8091,272696320,novice,0
OBJ:SMSMP_RelayMgr,8118,8119,novice,0
CTR:FailedReports,8084,8085,65536,novice,0
CTR:NumberOfFiles,8094,8095,65536,novice,0
CTR:RejectedReports,8086,8087,65536,novice,0
CTR:TotalReports,8088,8089,65536,novice,0
CTR:TotalReportsPerSec,8090,8091,272696320,novice,0
OBJ:SMSMP_SinvMgr,8120,8121,novice,0
CTR:DeltaReports,8082,8083,65536,novice,0
CTR:FailedReports,8084,8085,65536,novice,0
CTR:RejectedReports,8086,8087,65536,novice,0
CTR:ReportSize,8092,8093,65536,novice,0
CTR:TotalReports,8088,8089,65536,novice,0
CTR:TotalReportsPerSec,8090,8091,272696320,novice,0
OBJ:SMSMP_SinvCollFileMgr,8122,8123,novice,0
CTR:DeltaReports,8082,8083,65536,novice,0
CTR:FailedReports,8084,8085,65536,novice,0
CTR:NumberOfFiles,8094,8095,65536,novice,0
CTR:RejectedReports,8086,8087,65536,novice,0
CTR:TotalReports,8088,8089,65536,novice,0
CTR:TotalReportsPerSec,8090,8091,272696320,novice,0
OBJ:SMSMP_StatusMgr,8128,8129,novice,0
CTR:FailedEvents,8130,8131,65536,novice,0
CTR:NumberOfFiles,8138,8139,65536,novice,0
CTR:RejectedEvents,8132,8133,65536,novice,0
CTR:TotalEvents,8134,8135,65536,novice,0
CTR:TotalEventsPerSec,8136,8137,272696320,novice,0
Property(S): CcmSetObjectSecurity = FIL:C:\Windows\system32\ccmcore.dll
D:P(A;CIOI;GA;;;SY)(A;CIOI;GA;;;BA)(A;CIOI;GXGR;;;IU)(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)(A;CIOI;GXGR;;;NS)(A;CIOI;GXGR;;;AU)
FIL:C:\Windows\SysWOW64\ccmcore.dll
D:P(A;CIOI;GA;;;SY)(A;CIOI;GA;;;BA)(A;CIOI;GXGR;;;IU)(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)(A;CIOI;GXGR;;;NS)(A;CIOI;GXGR;;;AU)
FIL:D:\SMS_CCM\PolicyAgent.dll
D:(A;CIOI;GXGR;;;IU)
FIL:D:\SMS_CCM\StatusAgentProxy.dll
D:(A;CIOI;GXGR;;;IU)
FIL:D:\SMS_CCM\Sched_ps.dll
D:(A;CIOI;GXGR;;;IU)
FIL:D:\SMS_CCM\CcmExec.exe
D:(A;CIOI;GR;;;IU)(A;CIOI;GR;;;LS)
FIL:D:\SMS_CCM\CcmExec_ps.dll
D:(A;CIOI;GXGR;;;IU)(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)
FIL:D:\SMS_CCM\LSUtilities.dll
D:(A;CIOI;GXGR;;;IU)(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)
FIL:D:\SMS_CCM\FrameworkPerf.dll
D:(A;CIOI;GXGR;;;NS)(A;CIOI;GXGR;;;MU)(A;CIOI;GXGR;;;LU)
FIL:C:\Windows\SysWOW64\FrameworkPerf.dll
D:(A;CIOI;GXGR;;;NS)(A;CIOI;GXGR;;;MU)(A;CIOI;GXGR;;;LU)
FIL:C:\Windows\system32\FrameworkPerf.dll
D:(A;CIOI;GXGR;;;NS)(A;CIOI;GXGR;;;MU)(A;CIOI;GXGR;;;LU)
FIL:D:\SMS_CCM\fsputillib.dll
D:(A;CIOI;GXGR;;;IU)(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)
FIL:D:\SMS_CCM\StateMessage_ps.dll
D:(A;CIOI;GXGR;;;IU)
DIR:D:\SMS_CCM\Temp
O:BAG:BAD:P(A;CIOI;GA;;;SY)(A;CIOI;GA;;;BA)(A;CI;FXFRFW;;;IU)(A;OI;GRGW;;;CO)
DIR:D:\SMS_CCM\Logs
D:P(A;CIOI;FR;;;BU)(A;CI;0x100023;;;IU)(A;CI;0x100023;;;LS)(A;CI;0x100023;;;S-1-5-17)(A;CI;0x100023;;;NS)(A;IOOI;0x13008F;;;IU)(A;IOOI;0x13019F;;;LS)(A;IOOI;0x13008F;;;S-1-5-17)(A;IOOI;0x13008F;;;NS)(A;IOCIOI;0x0;;;OW)(A;OICI;FA;;;SY)(A;OICI;FA;;;BA)
DIR:D:\SMS_CCM\Staging
O:BAG:BAD:P(A;CIOI;GA;;;SY)(A;CIOI;GA;;;BA)
DIR:D:\SMS_CCM\SystemTemp
O:BAG:BAD:P(A;CIOI;GA;;;SY)(A;CIOI;GA;;;BA)(A;OICINP;FR;;;IU)
REG:MACHINE\SOFTWARE\Microsoft\CCM
O:BAG:BAD:P(A;CIOI;GA;;;SY)(A;CIOI;GA;;;BA)(A;CIOI;GR;;;LS)(A;CIOI;GR;;;NS)
REG:MACHINE\SOFTWARE\Microsoft\CCM\Logging
D:(A;CIOI;GR;;;AU)
REG:MACHINE\SOFTWARE\Microsoft\CCM\Logging\@Global
O:BAG:BAD:P(A;CIOI;GA;;;SY)(A;CIOI;GA;;;BA)(A;CIOI;GR;;;AU)
REG:MACHINE\Software\Microsoft\CCM\XMLSchema
D:(A;CIOI;GR;;;AU)
WMI:CCM
O:BAG:BAD:P(A;CI;0x0006001F;;;SY)(A;CI;0x0006003F;;;BA)(A;;0x00020001;;;IU)
WMI:CCM\Policy
O:BAG:BAD:
WMI:CCM\Events
O:BAG:BAD:P(A;CI;0x0006001F;;;SY)(A;CI;0x0006003F;;;BA)(A;CI;0x00020001;;;LS)
WMI:CCM\LocationServices
O:BAG:BAD:
WMI:CCM\NetworkConfig
O:BAG:BAD:
REG:MACHINE\SOFTWARE\Microsoft\CCM\Performance
D:(A;CIOI;GR;;;LS)(A;CIOI;GR;;;S-1-5-17)(A;CIOI;GR;;;NS)(A;CIOI;GR;;;MU)(A;CIOI;GR;;;LU)
REG:MACHINE\SOFTWARE\Microsoft\CCM\Performance
D:(A;CIOI;GR;;;LS)(A;CIOI;GR;;;S-1-5-17)(A;CIOI;GR;;;NS)(A;CIOI;GR;;;MU)(A;CIOI;GR;;;LU)
WMI:CCM\DataTransferService
O:BAG:BAD:(A;;0x00020001;;;IU)
FIL:D:\SMS_CCM\ccmgencert.dll
D:(A;CIOI;GXGR;;;IU)(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)
FIL:D:\SMS_CCM\ccmhttp.dll
D:(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)
FIL:D:\SMS_CCM\CcmTask.dll
D:(A;CIOI;GRGX;;;IU)
DIR:D:\SMS_CCM
O:BAG:BAD:P(A;CIOI;GA;;;SY)(A;CIOI;GA;;;BA)(A;CI;FXFR;;;IU)(A;CI;FXFR;;;LS)(A;CI;FXFR;;;S-1-5-17)
FIL:D:\SMS_CCM\ccmutillib.dll
D:(A;CIOI;GXGR;;;IU)(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)
FIL:D:\SMS_CCM\ccmperf.dll
D:(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)(A;CIOI;GXGR;;;NS)(A;CIOI;GXGR;;;MU)(A;CIOI;GXGR;;;LU)
FIL:C:\Windows\SysWOW64\ccmperf.dll
D:(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)(A;CIOI;GXGR;;;NS)(A;CIOI;GXGR;;;MU)(A;CIOI;GXGR;;;LU)
FIL:C:\Windows\system32\ccmperf.dll
D:(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)(A;CIOI;GXGR;;;NS)(A;CIOI;GXGR;;;MU)(A;CIOI;GXGR;;;LU)
FIL:D:\SMS_CCM\ccmclientisapi.dll
D:(A;CIOI;GA;;;SY)(A;CIOI;GA;;;BA)(A;CIOI;GXGR;;;AU)
FIL:D:\SMS_CCM\FrameworkServerPerf.dll
D:(A;CIOI;GXGR;;;NS)(A;CIOI;GXGR;;;MU)(A;CIOI;GXGR;;;LU)
FIL:C:\Windows\SysWOW64\FrameworkServerPerf.dll
D:(A;CIOI;GXGR;;;NS)(A;CIOI;GXGR;;;MU)(A;CIOI;GXGR;;;LU)
FIL:C:\Windows\system32\FrameworkServerPerf.dll
D:(A;CIOI;GXGR;;;NS)(A;CIOI;GXGR;;;MU)(A;CIOI;GXGR;;;LU)
DIR:D:\SCCM_App\CCM
D:P(A;CIOI;GA;;;SY)(A;CIOI;GA;;;BA)
DIR:D:\SCCM_App\Client
D:P(A;CIOI;GA;;;SY)(A;CIOI;GA;;;BA)(A;CIOI;GR;;;LS)(A;CIOI;GR;;;S-1-5-17)
DIR:D:\SCCM_App\CCM\Incoming
D:(A;;0x001200EF;;;LS)(A;;0x001200EF;;;S-1-5-17)(A;IOOICI;GA;;;LS)(A;IOOICI;GA;;;S-1-5-17)
FIL:D:\SMS_CCM\ccmisapi.dll
D:(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)(A;CIOI;GXGR;;;AU)
FIL:D:\SMS_CCM\smscore.dll
D:(A;CIOI;GXGR;;;IU)(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)
WMI:CCM\XmlStore
O:BAG:BAD:
FIL:D:\SMS_CCM\mpisapi_ps.dll
D:(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)
FIL:D:\SMS_CCM\mpperf.dll
D:(A;CIOI;GXGR;;;NS)(A;CIOI;GXGR;;;MU)(A;CIOI;GXGR;;;LU)
FIL:C:\Windows\SysWOW64\mpperf.dll
D:(A;CIOI;GXGR;;;NS)(A;CIOI;GXGR;;;MU)(A;CIOI;GXGR;;;LU)
FIL:C:\Windows\system32\mpperf.dll
D:(A;CIOI;GXGR;;;NS)(A;CIOI;GXGR;;;MU)(A;CIOI;GXGR;;;LU)
FIL:D:\SMS_CCM\getsdmpackage.dll
D:(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)
FIL:D:\SMS_CCM\GetAuth.dll
D:(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)
FIL:D:\SMS_CCM\getpolicy.dll
D:(A;CIOI;GXGR;;;LS)(A;CIOI;GXGR;;;S-1-5-17)(A;CIOI;GXGR;;;AU)
FIL:D:\SMS_CCM\1033\ccmres.dll
D:(A;CIOI;GRGX;;;IU)(A;CIOI;GRGX;;;LS)
Property(S): SMSCWSREGKEYNAME = MPCWSPath
Property(S): CcmDetectUninstall_ActionText = Set CCMREMOVEPRODUCT if REMOVE equals to TRUE.
Property(S): CcmCheckRepairNotInstalled_ActionText = Abort repair if the product has not been installed.
Property(S): CcmSwitchToRepairMode_ActionText = Product has been installed. Switch to repair mode for this installation.
Property(S): CcmSuppressReboot_ActionText = Suppress machine reboot after installation.
Property(S): CcmCheckFreeDiskSpace_ActionText = Check if the target volumn has enough space for the installation.
Property(S): CcmCheckFreeDiskSpace2_ActionText = Check if the target volumn has enough space for the installation.
Property(S): CcmSetInstallDirFromCmdLine_ActionText = Property custom action for setting install directory from command line.
Property(S): CcmCreateWmiNamespacesInit_ActionText = Processes the table CcmWmiNamespace and sends the context to CcmCreateWmiNamespaces.
Property(S): CcmCreateWmiNamespaces_ActionText = Creates the WMI namespaces found in the CcmWmiNamespace table
Property(S): CcmCreateWmiNamespacesRollback_ActionText = Calls CcmRemoveWmiNamespaces. Deletes the WMI namespaces.
Property(S): CcmRemoveWmiNamespacesInit_ActionText = Processes the table CcmWmiNamespace and sends the context to CcmRemoveWmiNamespaces.
Property(S): CcmRemoveWmiNamespaces_ActionText = Deletes WMI namespaces.
Property(S): CcmRegisterWmiMofFilesInit_ActionText = Queues MOF files in the CcmWmiMofFile table to be compiled.
Property(S): CcmRegisterWmiMofFile_ActionText = Compiles MOF files that were queued by CcmRegisterWmiMofFilesInit.
Property(S): CcmWmiRollback_ActionText = Deletes the existing site policy config and then recompiles MOF to restore old WMI instances.
Property(S): CcmDeleteWmiBackup_ActionText = Deletes the back up mof of the wmi namespace created for rolling back purposes.
Property(S): CcmRemoveWmiObjectsInit_ActionText = Queries the CcmWmiObject table for WMI objects to be removed.
Property(S): CcmRemoveWmiObjects_ActionText = Removes WMI objects found by CcmRemoveWmiObjectsInit.
Property(S): CcmRemoveWmiObjectsRollback_ActionText = Calls CcmRemoveWmiObjects. Removes WMI objects found by CcmRemoveWmiObjectsInit.
Property(S): CcmCreateIISVirtualDirectoriesInit_ActionText = Processes the CcmIISVirtualDirectory table and passes that information to CcmCreateIISVirtualDirectories to create the virtual directories.
Property(S): CcmCreateIISVirtualDirectories_ActionText = Creates the virtual directories specified in the CcmIISVirtualDirectory table.
Property(S): CcmRollbackIISVirtualDirectories_ActionText = Calls CcmRemoveIISVirtualDirectories. Removes IIS Virtual Directories found in CcmRemoveIISVirtualDirectoriesInit.
Property(S): CcmRemoveIISVirtualDirectories_ActionText = Removes IIS Virtual Directories found in CcmRemoveIISVirtualDirectoriesInit.
Property(S): CcmRemoveIISVirtualDirectoriesInit_ActionText = Queries the CcmIISVirtualDirectory table for IIS Virtual Directories to be removed.
Property(S): CcmCreateIISApplicationPoolsInit_ActionText = Processes the CcmIISAplicationPool table and passes that context to CcmCreateIISAplicationPools custom action.
Property(S): CcmCreateIISApplicationPools_ActionText = Creates the application pools specified in the CcmIISAplicationPools table.
Property(S): CcmCreateIISApplicationPoolsRollback_ActionText = Calls CcmRemoveIISApplicationPools. Removes IIS Application Pools found in CcmRemoveIISApplicationPoolsInit.
Property(S): CcmRemoveIISApplicationPoolsInit_ActionText = Queries the CcmIISApplicationPool table for IIS Application Pools to be removed.
Property(S): CcmRemoveIISApplicationPools_ActionText = Removes IIS Application Pools found in CcmRemoveIISApplicationPoolsInit.
Property(S): CcmDetectFilesInUseRemoveInit_ActionText = Detect if files are in used at uninstallation.
Property(S): CcmDetectFilesInUseInit_ActionText = Detects file in use.
Property(S): CcmDetectFilesInUse_ActionText = Moves files that are in use so that they will be deleted upon the next reboot.
Property(S): CcmDetectFilesInUseRollback_ActionText = Rolls back files moved by CcmDetectFilesInUse.
Property(S): CcmDetectFilesInUseCommit_ActionText = Commits action of CcmDetectFileInUse. After this we cannot rollback.
Property(S): CcmDetectFilesInUseRemoveRollback_ActionText = Calls CcmDetectFilesInUseRollback. Rolls back the files moved by CcmDetectFilesInUse.
Property(S): CcmDetectFilesInUseRemoveCommit_ActionText = Calls CcmDetectFilesInUseCommit. Commits action of CcmDetectFileInUse. After this the action cannot be rolled back.
Property(S): CcmLookupAccountNames_ActionText = Looks up the name of the Administrators group, Users group, and Creator Owner account, then sets the properties CcmAdministratorGroupName, CcmUsersGroupName, and CcmCreatorOwnerAccountName.
Property(S): CcmRegisterPerfCountersInit_ActionText = Processes the CcmPerfApplication table for components that will be registering a performance counter.
Property(S): CcmRegisterPerfCounters_ActionText = Registers performance counters gathered in the CcmRegisterPerfCountersInit action
Property(S): CcmUnregisterPerfCountersInit_ActionText = Processes the CcmPerfApplication table for components that will be unregistering a performance counter.
Property(S): CcmUnregisterPerfCounters_ActionText = Removes performance counters gathered in the CcmUnregisterPerfCountersInit action
Property(S): CcmRegisterPerfCountersRollback_ActionText = Rolls back any changes made by CcmRegisterPerfCounters if install fails.
Property(S): CcmUnloadWmiProvidersInit_ActionText = Enumerates component table and builds a list of files that will be installed
Property(S): CcmUnloadWmiProviders_ActionText = Enumerates all providers and unloads them, verifies they are unloaded, and then reloads them.
Property(S): CcmTypelibRollbackInit_ActionText = Queues a list of type libraries to be registered on rollback.
Property(S): CcmTypelibRollback_ActionText = In the event of install failing, this event rolls back the type libraries to the state before install started.
Property(S): CcmSetObjectSecurityInit_ActionText = Queries the CcmObjectSecurity table and passes this information to CcmSetObjectSecurity.
Property(S): CcmSetObjectSecurity_ActionText = Applying security permissions
Property(S): CcmSetInstallDir32_ActionText = Property action for setting installation directory for Configuration Manager Client on 32-bit platform.
Property(S): CcmSetInstallDir64_ActionText = Property action for setting installation directory for Configuration Manager Client on 64-bit platform.
Property(S): CcmSetPrimaryFolder_ActionText = Property action for setting target installation folder.
Property(S): PRIMARYFOLDER = TARGETDIR
Property(S): REBOOT = ReallySuppress
Property(S): AppDataFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\
Property(S): VersionNT64 = 603
Property(S): CCMINSTALLDIR = D:\SMS_CCM
Property(S): System64Folder.12C909B6_5F69_4C4D_8EC3_C225C1607933 = C:\Windows\system32\
Property(S): SystemFolder.12C909B6_5F69_4C4D_8EC3_C225C1607933 = C:\Windows\SysWOW64\
,{84ECA343-5158-48BB-87C3-37EF4B919F20},State Message Manager Endpoint,Serial,Normal,false,Internal,,,,,StateMessageManager.log,CCM_Framework
MP_DdrEndpoint,{36C7CE27-094C-4E55-B069-69CD633E52C0},MP Ddr Message Handler,Serial,Long,false,ClientSigned,,43200,,,MP_Ddr.log,ConfigMgr_MP|wmi:machine:mpccm_globalconfig|wmi:machine:mpccm_ddrmanagerconfig
MP_SinvEndpoint,{6E9048D4-A7A6-420D-AF2A-450582F1960A},MP Software Inventory Message Handler,Serial,Long,false,ClientSigned,,43200,,,MP_Sinv.log,ConfigMgr_MP|wmi:machine:mpccm_globalconfig|wmi:machine:mpccm_sinvmanagerconfig
MP_SinvCollFileEndpoint,{D26851EE-C93C-43FF-9754-C5FBEFEED553},MP Software Inventory Collected Files Handler,Serial,Long,false,ClientSigned,,43200,,,MP_SinvCollFile.log,ConfigMgr_MP|wmi:machine:mpccm_globalconfig|wmi:machine:mpccm_sinvcollfilemanagerconfig
MP_HinvEndpoint,{30297A13-1044-4E36-A87D-2171D2233946},MP Hardware Inventory Message Handler,Serial,Long,false,ClientSigned,,43200,,,MP_Hinv.log,ConfigMgr_MP|wql:machine:select * from __instancemodificationevent where targetinstance isa "mp_pssglobalconfiguration"|wmi:machine:mpccm_globalconfig|wmi:machine:mpccm_hinvmanagerconfig
MP_RelayEndpoint,{B80F30F1-AB53-4A86-8A32-770D8A418B99},MP Relay Handler,Serial,Long,false,ClientSigned,,43200,,,MP_Relay.log,ConfigMgr_MP|wmi:machine:mpccm_globalconfig|wmi:machine:mpccm_relaymanagerconfig
MP_LocationManager,{F21CCBF9-50A5-45E0-9B65-DF6C423E90F8},LocationManagerHandler Class,NoQueue,Long,false,All,,43200,,,MP_Location.log,ConfigMgr_MP|wql:machine:select * from __instancemodificationevent where targetinstance isa "mp_pssglobalconfiguration"
MP_TokenManager,{6FC37979-BF68-4B43-878F-CC5446E168BF},TokenManagerHandler Class,NoQueue,Long,false,ClientSigned,,43200,,,MP_Token.log,Conf
Property(S): DefaultUIFont = DefaultDlgFont
Property(S): DialogBox_Title = ConfigMgr Management Point Setup
Property(S): WelcomeDialog_Info = This will install the ConfigMgr Management Point.
Property(S): InstallDialog_Title = Install
Property(S): InstallDialog_SubTitle = The product is now ready to install
Property(S): InstallDialog_Info = Click Next to proceed.
Property(S): ProgressDialog_Title = Please Wait
Property(S): ProgressDialog_SubTitle = Setup is configuring your system.
Property(S): CompleteDialog_Title = Setup Complete
Property(S): CompleteDialog_SubTitle = Setup has finished updating your system.
Property(S): CompleteDialog_Info = Setup was successful.
Property(S): UserExitDialog_Title = Setup Aborted
Property(S): UserExitDialog_SubTitle = Setup was cancelled
Property(S): UserExitDialog_Info = The ConfigMgr Management Point setup was cancelled.
Property(S): InstallErrorDialog_Title = Setup Aborted
Property(S): InstallErrorDialog_SubTitle = Setup failed
Property(S): InstallErrorDialog_Info = Setup encountered an error and could not continue.
Property(S): PolReqStagingDir.1114972D_590D_4AB6_BA2E_779928CEDCC2 = D:\SMS_CCM\PolReqStaging\
Property(S): SystemFolder.1114972D_590D_4AB6_BA2E_779928CEDCC2 = C:\Windows\SysWOW64\
Property(S): System64Folder.1114972D_590D_4AB6_BA2E_779928CEDCC2 = C:\Windows\system32\
Property(S): CcmDefaultPolicyAuthority = SMS:MP:Default:{F33B71BE-4C5F-4D30-82F2-96686638F622}
Property(S): MPVDirRoot.67022EC1_A401_46E9_91FC_2DF2ED04CF15 = D:\SMS_CCM\SMS_MP\
Property(S): Res1033.0EACD2EE_412B_4985_9727_96BC217AABD8 = D:\SMS_CCM\1033\
Property(S): Res1033.4CB41E5B_59DE_4D09_98C5_332377961F73 = D:\SMS_CCM\1033\
Property(S): MsiLogFileLocation = D:\SCCM_App\logs\mpMSI.log
Property(S): ProductState = -1
Property(S): PackagecodeChanging = 1
Property(S): USESMSPORTS = TRUE
Property(S): SMSPORTS = 80
Property(S): USESMSSSLPORTS = TRUE
Property(S): SMSSSLPORTS = 443
Property(S): USESMSSSL = TRUE
Property(S): SMSSSLSTATE = 0
Property(S): CCMENABLELOGGING = TRUE
Property(S): CCMLOGLEVEL = 1
Property(S): CCMLOGMAXSIZE = 1000000
Property(S): CCMLOGMAXHISTORY = 1
Property(S): CURRENTDIRECTORY = D:\SCCM_App\bin\x64
Property(S): CLIENTUILEVEL = 3
Property(S): MSICLIENTUSESEXTERNALUI = 1
Property(S): CLIENTPROCESSID = 6264
Property(S): VersionDatabase = 200
Property(S): MsiSystemRebootPending = 1
Property(S): VersionMsi = 5.00
Property(S): VersionNT = 603
Property(S): WindowsBuild = 9600
Property(S): ServicePackLevel = 0
Property(S): ServicePackLevelMinor = 0
Property(S): MsiNTProductType = 3
Property(S): WindowsFolder = C:\Windows\
Property(S): WindowsVolume = C:\
Property(S): System64Folder = C:\Windows\system32\
Property(S): SystemFolder = C:\Windows\SysWOW64\
Property(S): RemoteAdminTS = 1
Property(S): TempFolder = C:\Windows\TEMP\
Property(S): ProgramFilesFolder = C:\Program Files (x86)\
Property(S): CommonFilesFolder = C:\Program Files (x86)\Common Files\
Property(S): ProgramFiles64Folder = C:\Program Files\
Property(S): CommonFiles64Folder = C:\Program Files\Common Files\
Property(S): FavoritesFolder = C:\Windows\system32\config\systemprofile\Favorites\
Property(S): NetHoodFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Network Shortcuts\
Property(S): PersonalFolder = C:\Windows\system32\config\systemprofile\Documents\
Property(S): PrintHoodFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Printer Shortcuts\
Property(S): RecentFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Recent\
Property(S): SendToFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\SendTo\
Property(S): TemplateFolder = C:\ProgramData\Microsoft\Windows\Templates\
Property(S): CommonAppDataFolder = C:\ProgramData\
Property(S): LocalAppDataFolder = C:\Windows\system32\config\systemprofile\AppData\Local\
Property(S): MyPicturesFolder = C:\Windows\system32\config\systemprofile\Pictures\
Property(S): AdminToolsFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools\
Property(S): StartupFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\
Property(S): ProgramMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\
Property(S): StartMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\
Property(S): DesktopFolder = C:\Users\Public\Desktop\
Property(S): FontsFolder = C:\Windows\Fonts\
Property(S): GPTSupport = 1
Property(S): OLEAdvtSupport = 1
Property(S): ShellAdvtSupport = 1
Property(S): MsiAMD64 = 6
Property(S): Msix64 = 6
Property(S): Intel = 6
Property(S): PhysicalMemory = 12288
Property(S): VirtualMemory = 10257
Property(S): AdminUser = 1
Property(S): MsiTrueAdminUser = 1
Property(S): LogonUser = SYSTEM
Property(S): UserSID = S-1-5-18
Property(S): UserLanguageID = 6153
Property(S): ComputerName = HCVX382
Property(S): SystemLanguageID = 6153
Property(S): ScreenX = 1024
Property(S): ScreenY = 768
Property(S): CaptionHeight = 23
Property(S): BorderTop = 1
Property(S): BorderSide = 1
Property(S): TextHeight = 16
Property(S): TextInternalLeading = 3
Property(S): ColorBits = 32
Property(S): TTCSupport = 1
Property(S): Time = 13:50:23
Property(S): Date = 10/09/2014
Property(S): MsiNetAssemblySupport = 4.0.30319.33440
Property(S): MsiWin32AssemblySupport = 6.3.9600.16384
Property(S): RedirectedDllSupport = 2
Property(S): MsiRunningElevated = 1
Property(S): Privileged = 1
Property(S): USERNAME = Windows User
Property(S): DATABASE = C:\Windows\Installer\274121.msi
Property(S): OriginalDatabase = D:\SCCM_App\bin\x64\mp.msi
Property(S): UILevel = 2
Property(S): ACTION = INSTALL
Property(S): SMSCWSADSPATH = IIS://LocalHost/W3SVC/1
Property(S): CCMSHAREMODE = 1
Property(S): IISAnonymousUserAccount = IUSR
Property(S): ROOTDRIVE = G:\
Property(S): CostingComplete = 1
Property(S): OutOfDiskSpace = 0
Property(S): OutOfNoRbDiskSpace = 0
Property(S): PrimaryVolumeSpaceAvailable = 74701392
Property(S): PrimaryVolumeSpaceRequired = 25840
Property(S): PrimaryVolumeSpaceRemaining = 74675552
Property(S): INSTALLLEVEL = 1
Property(S): CcmAdministratorsGroupName = Administrators
Property(S): CcmUsersGroupName = Users
Property(S): CcmCreatorOwnerAccountName = CREATOR OWNER
Property(S): PrimaryVolumePath = D:
Property(S): SOURCEDIR = D:\SCCM_App\bin\x64\
Property(S): SourcedirProduct = {F33B71BE-4C5F-4D30-82F2-96686638F622}
Property(S): LASTSTATESERIALNUM = 0
Property(S): CCMHTTPSPORT = 443
Property(S): CCMHTTPSSTATE = 0
Property(S): CCMHTTPPORT = 80
Property(S): ProductToBeRegistered = 1
MSI (s) (18:A4) [13:50:23:792]: Note: 1: 1708
MSI (s) (18:A4) [13:50:23:792]: Product: ConfigMgr Management Point -- Installation operation failed.
MSI (s) (18:A4) [13:50:23:793]: Windows Installer installed the product. Product Name: ConfigMgr Management Point. Product Version: 5.00.7958.1000. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 1603.
MSI (s) (18:A4) [13:50:23:808]: Deferring clean up of packages/files, if any exist
MSI (s) (18:A4) [13:50:23:808]: MainEngineThread is returning 1603
MSI (s) (18:74) [13:50:23:814]: RESTART MANAGER: Session closed.
MSI (s) (18:74) [13:50:23:814]: No System Restore sequence number for this installation.
=== Logging stopped: 10/09/2014 13:50:23 ===
MSI (s) (18:74) [13:50:23:820]: User policy value 'DisableRollback' is 0
MSI (s) (18:74) [13:50:23:820]: Machine policy value 'DisableRollback' is 0
MSI (s) (18:74) [13:50:23:820]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (18:74) [13:50:23:821]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (18:74) [13:50:23:821]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (18:74) [13:50:23:822]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (18:74) [13:50:23:823]: Destroying RemoteAPI object.
MSI (s) (18:C0) [13:50:23:823]: Custom Action Manager thread ending.
MSI (c) (78:B4) [13:50:23:825]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (78:B4) [13:50:23:826]: MainEngineThread is returning 1603
=== Verbose logging stopped: 10/09/2014 13:50:23 ===

MSI (c) (18:A8) [15:00:30:016]: Resetting cached policy values
MSI (c) (18:A8) [15:00:30:016]: Machine policy value 'Debug' is 0
MSI (c) (18:A8) [15:00:30:016]: ******* RunEngine:
 ******* Product: D:\SCCM_ap\bin\x64\00000409\msxml6_x64.msi
 ******* Action:
 ******* CommandLine: **********
MSI (c) (18:A8) [15:00:30:016]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (18:A8) [15:00:33:018]: Failed to grab execution mutex. System error 258.
MSI (c) (18:A8) [15:00:33:027]: Cloaking enabled.
MSI (c) (18:A8) [15:00:33:027]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (18:A8) [15:00:33:031]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (c) (18:A8) [15:00:33:033]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (18:A8) [15:00:33:034]: MainEngineThread is returning 1618
=== Verbose logging stopped: 10/09/2014 15:00:33 ===
MSI (s) (8C:A0) [15:19:09:082]: Hello, I'm your 64bit Elevated custom action server.
Action start 15:19:08: SkipInstallCA.
CustomAction SkipInstallCA returned actual error code 259 (note this may not be 100% accurate if translation happened inside sandbox)
Action ended 15:19:09: SkipInstallCA. Return value 5.
Action ended 15:19:09: INSTALL. Return value 1.
Property(S): ProductCode = {633F3A7E-471D-4C08-A643-C184A2EE19AB}
Property(S): Manufacturer = Microsoft Corporation
Property(S): ProductVersion = 6.10.1129.0
Property(S): ProductLanguage = 1033
Property(S): UpgradeCode = {5BBED1F8-E6F3-4A02-BC97-26D35BE200CA}
Property(S): ARPPRODUCTICON = ARPIco
Property(S): PIDTemplate = 53934<````=````=````=````=`````>@@@@@
Property(S): PROMPTROLLBACKCOST = P
Property(S): DiskPrompt = [1]
Property(S): INSTALLLEVEL = 100
Property(S): ALLUSERS = 1
Property(S): InstallMode = Typical
Property(S): ErrorIcon = ErrorIco
Property(S): SuccessIcon = SuccessIco
Property(S): WarningIcon = WarningIco
Property(S): LicenseIcon = LicenseIco
Property(S): SetupIcon = SetupIco
Property(S): CompleteIcon = CompleteIco
Property(S): CustomIcon = CustomIco
Property(S): RepairIcon = RepairIco
Property(S): RemoveIcon = RemoveIco
Property(S): ModifyIcon = ModifyIco
Property(S): NewIcon = NewIco
Property(S): UpIcon = UpIco
Property(S): DialogBanner = BannerBmp
Property(S): WelcomeBmp = WelcomeBmp
Property(S): ApplicationUsers = AllUsers
Property(S): Details = 0
Property(S): AgreeToLicense = No
Property(S): _IsMaintenance = Reinstall
Property(S): _IsMaintenance2 = Modify
Property(S): ReinstallModeText = omus
Property(S): Display_IsBitmapDlg = 1
Property(S): Interrupted = 0
Property(S): ProductID = none
Property(S): ISENABLEDWUSFINISHDIALOG = 1
Property(S): SQLServerText1 = 0
Property(S): SQLServerVersionText1 = 0
Property(S): SQLServerVersionText2 = 0
Property(S): SQLServerVersionText3 = 0
Property(S): CA_ERRORCOUNT = 0
Property(S): CA_WARNINGCOUNT = 0
Property(S): CA_SUCCESSCOUNT = 0
Property(S): MINIMUMOS = true
Property(S): UI_SHOWCOPYRIGHT = yes
Property(S): ShowUserRegistrationDlg = 1
Property(S): ErrorDialog = ErrorDlg
Property(S): DefaultUIFont = Tahoma8
Property(S): VersionNT = 603
Property(S): ARPHELPLINK =
http://go.microsoft.com/fwlink/?LinkId=52156
Property(S): SecureCustomProperties = NEWERFOUND.0F33386E_8789_4165_9182_03203162EFEB;OLDERFOUND.0F33386E_8789_4165_9182_03203162EFEB;OLDERFOUND2.0F33386E_8789_4165_9182_03203162EFEB
Property(S): DesktopFolder = C:\Users\Public\Desktop\
Property(S): ProgramFilesFolder = C:\Program Files (x86)\
Property(S): ProgramFiles64Folder = C:\Program Files\
Property(S): ButtonTextStyle = {\ButtonTextStyle}
Property(S): DlgTextStyle = {\DlgTextStyle}
Property(S): DlgTextStyleB = {\DlgTextStyleB}
Property(S): DlgTitleStyle = {\DlgTitleStyle}
Property(S): DlgTitleStyleB = {\DlgTitleStyleB}
Property(S): FixedStyle = {\FixedStyle}
Property(S): USERNAME = Windows User
Property(S): DialogTitleSetup = Setup
Property(S): DialogTitlePatch = Patch
Property(S): DialogTitleUpgrade = Upgrade
Property(S): Text_ArrowLeft = <
Property(S): Text_ArrowRight = >
Property(S): ButtonText_Next = Next
Property(S): ButtonText_Next_Hot = &Next
Property(S): ButtonText_Cancel = Cancel
Property(S): ButtonText_Cancel_Hot = &Cancel
Property(S): ButtonText_Back = Back
Property(S): ButtonText_Back_Hot = &Back
Property(S): ButtonText_Finish = Finish
Property(S): ButtonText_Finish_Hot = &Finish
Property(S): ButtonText_Update = Update >
Property(S): ButtonText_Update_Hot = &Update >
Property(S): ButtonText_Ok = OK
Property(S): ButtonText_Ok_Hot = &OK
Property(S): ButtonText_Yes = Yes
Property(S): ButtonText_Yes_Hot = &Yes
Property(S): ButtonText_No = No
Property(S): ButtonText_No_Hot = &No
Property(S): ButtonText_Abort = Abort
Property(S): ButtonText_Abort_Hot = &Abort
Property(S): ButtonText_Ignore = Ignore
Property(S): ButtonText_Ignore_Hot = &Ignore
Property(S): ButtonText_Retry = Retry
Property(S): ButtonText_Retry_Hot = &Retry
Property(S): ButtonText_Change = Change...
Property(S): ButtonText_Change_Hot = &Change...
Property(S): ButtonText_Help = Help
Property(S): ButtonText_Help_Hot = &Help
Property(S): ButtonText_Install = Install
Property(S): ButtonText_Install_Hot = &Install
Property(S): ButtonText_Exit = Exit
Property(S): ButtonText_Exit_Hot = &Exit
Property(S): ButtonText_Remove = Remove
Property(S): ButtonText_Remove_Hot = &Remove
Property(S): ButtonText_Space = Space
Property(S): ButtonText_Space_Hot = &Space
Property(S): ButtonText_Browse = Browse...
Property(S): ButtonText_Browse_Hot = Bro&wse...
Property(S): ButtonText_DiskCost = Disk Cost...
Property(S): ButtonText_DiskCost_Hot = &Disk Cost...
Property(S): LabelText_Status = Status
Property(S): LabelText_SerialNumber = &Serial Number:
Property(S): LabelText_UserName = &User Name
Property(S): LabelText_PersonName = Name
Property(S): LabelText_PersonOrganization = Company
Property(S): LabelText_InstallTo = Install to
Property(S): LabelText_Modify = &Modify
Property(S): LabelText_Repair = Re&pair
Property(S): LabelText_Remove = &Remove
Property(S): LabelText_Complete = &Complete
Property(S): LabelText_Custom = Cu&stom
Property(S): LabelText_NetworkLocation = &Network location:
Property(S): LabelText_LookIn = &Look in
Property(S): LabelText_FolderName = &Folder name
Property(S): LabelText_FeatureDescription = Feature description
Property(S): LabelText_CopyFilesFrom = Copy Files from
Property(S): LabelText_InstallFor = Install this application for
Property(S): HeadText_AdminWelcome = Welcome to the Install Wizard for
Property(S): HeadText_InstallWelcome = Welcome to the Install Wizard for
Property(S): HeadText_WelcomePatch = Welcome to the Patch for
Property(S): HeadText_SetupWelcome = Welcome to the
Property(S): HeadText_SetupWelcome2 = Setup
Property(S): HeadText_ResumeInstall = Resuming the Install Wizard for
Property(S): HeadText_SetupInterrupted = Setup Interrupted
Property(S): HeadText_LicenseAgreement = License Agreement
Property(S): HeadText_FeatureSelection = Feature Selection
Property(S): HeadText_NetworkLocation = Network Location
Property(S): HeadText_ProgramMaintenance = Program Maintenance
Property(S): HeadText_DiskSpaceRequirements = Disk Space Requirements
Property(S): HeadText_FilesInUse = Files in Use
Property(S): HeadText_DatabaseFolder = Database Folder
Property(S): HeadText_RegistrationInformation = Registration Information
Property(S): HeadText_CompletingSetup = Completing the
Property(S): HeadText_CompletingSetup2 = Setup
Property(S): HeadText_InstallingProduct = Installing
Property(S): HeadText_UninstallProduct = Uninstalling
Property(S): HeadText_ChangeDestinationFolder = Change Current Destination Folder
Property(S): HeadText_ReadyInstall = Ready to Install the Program
Property(S): HeadText_ReadyRepair = Ready to Repair the Program
Property(S): HeadText_ReadyModify = Ready to Modify the Program
Property(S): HeadText_RemoveProgram = Remove the Program
Property(S): HeadText_OutOfDiskSpace = Out of Disk Space
Property(S): DescText_FilesInUse = Some files that need to be updated are currently in use.
Property(S): DescText_RegistrationInformation = The following information will personalize your installation.
Property(S): DescText_ServerImage = Setup will create a server image of
Property(S): DescText_ServerImage2 = at a specified network location. To continue, click Next.
Property(S): DescText_InstallModifyRemove = Setup helps you install, modify or remove
Property(S): DescText_InstallModifyRemove2 = . To continue, click Next.
Property(S): DescText_PatchInstall = The Install Wizard will install the Patch for
Property(S): DescText_PatchInstall2 = on your computer. To continue, click Update.
Property(S): DescText_WizardComplete = The Install Wizard will complete the installation of
Property(S): DescText_WizardComplete2 = on your computer. To continue, click Next.
Property(S): DescText_CompleteSuspended = The Install Wizard will complete the suspended installation of
Property(S): DescText_CompleteSuspended2 = on your computer. To continue, click Next.
Property(S): DescText_SuccessfulInstallation = Setup has installed
Property(S): DescText_SuccessfulInstallation2 = successfully. Click Finish to exit.
Property(S): DescText_SuccessfulRemove = Setup has removed
Property(S): DescText_SuccessfulRemove2 = successfully. Click Finish to exit.
Property(S): DescText_SuccessfulRepair = Setup has repaired
Property(S): DescText_SuccessfulRepair2 = successfully. Click Finish to exit.
Property(S): DescText_SuccessfulModify = Setup has modified
Property(S): DescText_SuccessfulModify2 = successfully. Click Finish to exit.
Property(S): DescText_SetupInterrupted = Setup was interrupted before
Property(S): DescText_SetupInterrupted2 = could be completely installed.
Property(S): DescText_PreparingSetup = Setup is preparing the Install Wizard which will guide you through the program setup process. Please wait.
Property(S): DescText_FeatureSelection = Select the program features you want installed.
Property(S): DescText_ProgramFeaturesInstall = The program features you selected are being installed.
Property(S): DescText_ProgramFeaturesUninstall = The program features you selected are being uninstalled.
Property(S): DescText_ReadLicense = Please read the following license agreement carefully.
Property(S): DescText_SpecifyNetworkLocation = Specify a network location for the server image of the product.
Property(S): DescText_BrowseDestination = Browse to the destination folder.
Property(S): DescText_ModifyRepairRemove = Repair or remove the program.
Property(S): DescText_ReadyInstallation = Setup is ready to begin installation.
Property(S): DescText_ChosenRemove = You have chosen to remove the program from your system.
Property(S): DescText_DiskSpaceRequirements = The disk space required for the installation of the selected features.
Property(S): DescText_DiskExceedsAvailable = Disk space required for the installation exceeds available disk space.
Property(S): Text_ReRunSetup = Your system has not been modified. To complete installation at another time, please run setup again.
Property(S): Text_FinishExit = Click Finish to exit Setup.
Property(S): Text_RestoreState = You can either keep any existing installed elements on your system to continue this installation at a later time or you can restore your system to its original state prior to the installation.
Property(S): Text_RestoreClick = Click Restore or Continue Later to exit Setup.
Property(S): Text_InstallWait = Please wait while the Install Wizard installs
Property(S): Text_InstallWait2 = . This may take several minutes.
Property(S): Text_UninstallWaitText = Please wait while the Install Wizard uninstalls
Property(S): Text_UninstallWaitText2 = . This may take several minutes.
Property(S): Text_UninstallWait = Please wait while the Install Wizard uninstalls
Property(S): Text_UninstallWait2 = . This may take several minutes.
Property(S): Text_ProgressDone = Progress done
Property(S): Text_Copyright = WARNING: This program is protected by copyright law and international treaties.
Property(S): Text_BeginInstallation = Click Install to begin the installation.
Property(S): Text_ReviewChange = If you want to review or change any of your installation settings, click Back. Click Cancel to exit Setup.
Property(S): Text_AlterFeatureInstall = Click an icon in the following list to change how a feature is installed.
Property(S): Text_ConfirmExit = The installation is not yet complete. Are you sure you want to exit?
Property(S): Text_FeatureSelectionDescription = This feature requires 4 MB on your hard drive.
Property(S): Text_EnterNetworkLocation = Enter the network location or click Change to browse to a location. Click Install to create a server image of
Property(S): Text_EnterNetworkLocation2 = at the specified network location or click Cancel to exit Setup.
Property(S): Text_SelectDifferentDrive = The highlighted volumes do not have enough disk space available for the currently selected features. You can remove files from the highlighted volumes, choose to install less features onto local drives, or select different
destination drives.
Property(S): Text_RepairInstallationErrors = Repair installation errors in the program. This option fixes missing or corrupt files, shortcuts, and registry entries.
Property(S): Text_RemoveFromComputer = Remove
Property(S): Text_RemoveFromComputer2 = from your computer.
Property(S): Text_UsingFilesRetry = The following applications are using files that need to be updated by this setup. Close these applications and click Retry to continue.
Property(S): Text_ClickRemove = Click Remove to remove
Property(S): Text_ClickRemove2 = from your computer. After removal, this program will no longer be available for use.
Property(S): Text_ReviewChangeBack = If you want to review or change any settings, click Back.
Property(S): Text_AllUsers = &Anyone who uses this computer (all users)
Property(S): Text_OnlyMe = Only for &me ([USERNAME])
Property(S): Text_NotAcceptTerms = I &do not accept the terms in the license agreement
Property(S): Text_AcceptTerms = I &accept the terms in the license agreement
Property(S): Text_RegInfoNameAndOrg = Enter your name and the name of your organization in the fields below.
Property(S): Text_RegInfoOrg = Enter the name of your organization in the field below.
Property(S): Upgrade_Confirmation = A lower version of this product has been detected on your system. Would you like to upgrade your existing installation?
Property(S): AdminMessage = Setup requires user to be in the administrator group in order to continue the installation process. Setup is aborting as the current user is not in the administrator group.
Property(S): SupportedOSMessage = Installation of this product failed because it is not supported on this operating system. For information on supported configurations, see the product documentation.
Property(S): ShortCutText = MSXML 6.0
Property(S): DialogTitle = MSXML 6.0 Parser Setup
Property(S): ProductName = MSXML 6.0 Parser
Property(S): ShortName = MSXML 6.0 Parser
Property(S): WrongPackage = This MSXML6.0 package is not supported on the current processor type.
Property(S): DialogPatchTitle = MSXML 6.0 Parser Patch
Property(S): SystemFolder = C:\Windows\SysWOW64\
Property(S): WdSfpCaMainModId.41646F16_4E6C_4E96_BF1B_772105414B9D = 86F857F6_A743_463D_B2FE_98CB5F727E09
Property(S): AppGuidRegKey = Wdsfpca_Uninstall_RegKey.86F857F6_A743_463D_B2FE_98CB5F727E09
Property(S): System64Folder = C:\Windows\system32\
Property(S): MsiLogFileLocation = D:\SCCM_ap\logs\msxml6_x64MSI.log
Property(S): PackageCode = {6A3B8AE9-3F13-4302-A5AE-C51A0BA1592E}
Property(S): ProductState = -1
Property(S): PackagecodeChanging = 1
Property(S): CURRENTDIRECTORY = D:\SCCM_ap\bin\x64
Property(S): CLIENTUILEVEL = 3
Property(S): CLIENTPROCESSID = 5220
Property(S): MsiRestartManagerSessionKey = 0feb3f07a88fb247a0f339814320aad0
Property(S): VersionDatabase = 300
Property(S): VersionMsi = 5.00
Property(S): VersionNT64 = 603
Property(S): WindowsBuild = 9600
Property(S): ServicePackLevel = 0
Property(S): ServicePackLevelMinor = 0
Property(S): MsiNTProductType = 3
Property(S): WindowsFolder = C:\Windows\
Property(S): WindowsVolume = C:\
Property(S): RemoteAdminTS = 1
Property(S): TempFolder = C:\Windows\TEMP\
Property(S): CommonFilesFolder = C:\Program Files (x86)\Common Files\
Property(S): CommonFiles64Folder = C:\Program Files\Common Files\
Property(S): AppDataFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\
Property(S): FavoritesFolder = C:\Windows\system32\config\systemprofile\Favorites\
Property(S): NetHoodFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Network Shortcuts\
Property(S): PersonalFolder = C:\Windows\system32\config\systemprofile\Documents\
Property(S): PrintHoodFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Printer Shortcuts\
Property(S): RecentFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Recent\
Property(S): SendToFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\SendTo\
Property(S): TemplateFolder = C:\ProgramData\Microsoft\Windows\Templates\
Property(S): CommonAppDataFolder = C:\ProgramData\
Property(S): LocalAppDataFolder = C:\Windows\system32\config\systemprofile\AppData\Local\
Property(S): MyPicturesFolder = C:\Windows\system32\config\systemprofile\Pictures\
Property(S): AdminToolsFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools\
Property(S): StartupFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\
Property(S): ProgramMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\
Property(S): StartMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\
Property(S): FontsFolder = C:\Windows\Fonts\
Property(S): GPTSupport = 1
Property(S): OLEAdvtSupport = 1
Property(S): ShellAdvtSupport = 1
Property(S): MsiAMD64 = 6
Property(S): Msix64 = 6
Property(S): Intel = 6
Property(S): PhysicalMemory = 12288
Property(S): VirtualMemory = 12166
Property(S): AdminUser = 1
Property(S): MsiTrueAdminUser = 1
Property(S): LogonUser = SYSTEM
Property(S): UserSID = S-1-5-18
Property(S): UserLanguageID = 6153
Property(S): ComputerName = HCVX382
Property(S): SystemLanguageID = 6153
Property(S): ScreenX = 1024
Property(S): ScreenY = 768
Property(S): CaptionHeight = 23
Property(S): BorderTop = 1
Property(S): BorderSide = 1
Property(S): TextHeight = 16
Property(S): TextInternalLeading = 3
Property(S): ColorBits = 32
Property(S): TTCSupport = 1
Property(S): Time = 15:19:09
Property(S): Date = 10/09/2014
Property(S): MsiNetAssemblySupport = 4.0.30319.33440
Property(S): MsiWin32AssemblySupport = 6.3.9600.16384
Property(S): RedirectedDllSupport = 2
Property(S): MsiRunningElevated = 1
Property(S): Privileged = 1
Property(S): DATABASE = C:\Windows\Installer\edbb.msi
Property(S): OriginalDatabase = D:\SCCM_ap\bin\x64\00000409\msxml6_x64.msi
Property(S): UILevel = 2
Property(S): ACTION = INSTALL
MSI (s) (8C:A8) [15:19:09:199]: Note: 1: 1707
MSI (s) (8C:A8) [15:19:09:199]: Product: MSXML 6.0 Parser -- Installation completed successfully.
MSI (s) (8C:A8) [15:19:09:200]: Windows Installer installed the product. Product Name: MSXML 6.0 Parser. Product Version: 6.10.1129.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 0.
MSI (s) (8C:A8) [15:19:09:208]: Deferring clean up of packages/files, if any exist
MSI (s) (8C:A8) [15:19:09:208]: MainEngineThread is returning 0
MSI (s) (8C:94) [15:19:09:213]: RESTART MANAGER: Session closed.
MSI (s) (8C:94) [15:19:09:213]: No System Restore sequence number for this installation.
=== Logging stopped: 10/09/2014 15:19:09 ===
MSI (s) (8C:94) [15:19:09:214]: User policy value 'DisableRollback' is 0
MSI (s) (8C:94) [15:19:09:214]: Machine policy value 'DisableRollback' is 0
MSI (s) (8C:94) [15:19:09:214]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (8C:94) [15:19:09:215]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (8C:94) [15:19:09:215]: Note: 1: 2203 2: C:\Windows\Installer\inprogressinstallinfo.ipi 3: -2147287038
MSI (s) (8C:94) [15:19:09:215]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (8C:94) [15:19:09:216]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (8C:94) [15:19:09:217]: Destroying RemoteAPI object.
MSI (s) (8C:C4) [15:19:09:217]: Custom Action Manager thread ending.
MSI (c) (64:7C) [15:19:09:218]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (64:7C) [15:19:09:219]: MainEngineThread is returning 0
=== Verbose logging stopped: 10/09/2014 15:19:09 ===

Error 8 when starting the extracting the program-data load error:status 51

Dear all,
I am facing a data exracton problem while extracting data from SAP source system (Development Client 220). The scenario and related setting are as the flowings:
A. Setting:
We have created 2 source system one for the development and another for the quality in BW development client
1. BW server: SAP NetWeaver 2004s BI 7
PI_BASIS: 2005_1_700 Level: 12
SAP_BW: 700 Level:13
Source system (Development Client 220)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: SunOS
Source system (Quality Client 300)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: HP-UX
B. The scenario:
I was abele to load the Info provider from the Source system (Development Client 220), late we create another Source system (Quality Client 300) and abele to load the Info provider from that,
After creating the another Source system (Quality Client 300), initially I abele to load the info provider from both the Source system , but now I am unable to load the Info provider from the (Development Client 220),
Source system Creation:
For both 220 and 300, back ground user in source system is same with system type with same authorization (sap_all, sap_new, S_BI-WX_RFC) And user for source system to bw connection is dialog type (S_BI-WX_RFC, S_BI-WHM_RFC, SAP_ALL, SAP_NEW)
1: Now while at the Info Package : Start data load immediately and then get the
e-mail sent by user RFCUSER, and the content:
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
2:Error in the detail tab of the call monitor as under,
bi data upload error:status 51 - error: Error 8 when starting the extracting the program 
Extraction (messages): Errors occurred
Error occurred in the data selection
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document not posted (red)
bw side: status 03: "IDoc: 0000000000007088 Status: Data passed to port OK,
 IDoc sent to SAP system or external program"
r/3 side: status 51: IDoc: 0000000000012140 Status: Application document not posted
 Error 8 when starting the extraction program
Info IDoc 1 : Application document posted (green)
 r/3 side: "IDoc: 0000000000012141 Status: Data passed to port OK
 IDoc sent to SAP system or external program"
 bw side: "IDoc: 0000000000007089 Status: Application document posted,
 IDoc was successfully transferred to the monitor updating"
Have attached screen shots showing error at BW side.
 check connection is ok, tried to restore the setting for bw-r3 connection though same problem
 Have checked partner profile.
what's wrong with the process? 
Best regards,
dushyant.

Hi,
 Refer note 140147.
Regards,
Meiy

Error Status Message

Hi Vadim,
Thanks for your help in my previous issue.
My client wants to setup the error message when the user enter >1 value in input schedule against to each month(Jan,Feb and March etc) it is basically HC planning where as they have average headcount value is 1 (So that the user has to enter the value between 0 to 1). The requirement is when the user enters more than 1 then the system needs to thrown an error message and it has to restricted the user.
I have found the normal excel function to setup this error status message through data validation in excel. Can you please tell me is there any EPM function available for this kind of setups in SAP BPC 10.0 EPM. So that we can use that option instead of normal excel function.
Please see my current setup message in the above screen shot.
Regards,
Satish

Hi Satish,
No EPM functions available, you have to use Excel data validation.
BPC can validate data only afte data was sent to database.
Vadim

Message has error status at outbound side File To Idoc Scenario

hi ,
In my File to Idoc scenario , when i go to sxmb_moni , i found that its showing red flag at Outbound Status Tab and showing message "Message has error status at outbound side".
When i go to IDX5 and and select my idoc and click on Transaction Id it shows "Password logon no longer possible - too many faile" .
Please suggest what may be the problem ?
Regards,
Rohit

1. First check the RFC destination name used in receiver Idoc adapter communication channel.
2. As i said earlier, in sm59 transaction in XI gui, u can check same rfc destination under type 3. There check the logon credentials and the username.
3. Now goto the R3 system GUI and check in su01 that same user is locked or not. If locked unlock it.
4. And if u change the password of that user, then do the similar change in XI -> sm59 -> rfc destination logon credential
Regards,
Prateek

Error message without error status matching

Hi Gurus,
I have a error message from process chain as follows:
Failure Group EREC01 Special FULL - Job 1 Process Group EREC01 Special FULL - Job 1 Of Type Local Process Chain Has Status Ended with errors (Process Chain Encapsulate EREC01 GRP) It is now 21:19:54 on 05/05/2010 (time zone PST) Current Process Chain Run: D80JW1WN91Q0OEZ3K0ZGF3MS5 in System BIP (Host biprd03)
but when I get into rspc to check the status for this running, it shows green for status in the log view. why does this error message come up without any error status matching?
Many thanks

Hi,
Please check if your are looking the correct process chain and in correct transaction. you may look at the logs of this process chain in RSPCM and not in RSPC.
If you can not find this error status message in RSPCM, them check SM37 and SM12 by providing the proper timeinterval for the message you got.
Regards,
Pratap Sone

ITune - Windows 8.1 Upgrade error : Installation success or error status: 1603

Hello,
When I try a upgrade itunes automaticaly ( IE, open iTunes and iTunes tells me there and update ), it fails to update.
When I manually download the latest copy of itunes and double click to install it, it failes with :-
iTunes installer completed
The installer encountered errors before iTunes could be configured
Errors occured during installations. your system has not been modified
Please run the installer again. finish to exit
When I look at the event loggs I can see :-
Windows Installer installed the product. Product Name: Apple Mobile Device Support. Product Version: 7.1.1.3. Product Language: 1033. Manufacturer: Apple Inc.. Installation success or error status: 1603.
Windows Installer reconfigured the product. Product Name: Bonjour. Product Version: 3.0.0.10. Product Language: 1033. Manufacturer: Apple Inc.. Reconfiguration success or error status: 0.
Windows Installer reconfigured the product. Product Name: Apple Application Support. Product Version: 3.0.1. Product Language: 1033. Manufacturer: Apple Inc.. Reconfiguration success or error status: 0.
Please can someone help me fix this ? and tell me what I need to do to stop it happening inthe furture ?
Many Thanks

Hello there, G-Oker.
The following Knowledge Base article offers up some great recommendations for the very error message you are receiving:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Particularly:
Check USB connections
Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you checked your connections and are still seeing the error message, check for hardware issues.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

SAP PI Message Cancellation Alert - Message does not have restartable error status

Hello SCNers
Version: 7.1
Scenario: File --> PI -->SOAP
We have a situation where a PI message in Integration Engine shows error status.We want to cancel the message in IE but are unable to do so.
On clicking Cancel for this message in SXMB_MONI, we are receiving an alert "Message does not have restartable error status".
In SXMSPMAST table, value for ITFACTION is DEL.
We do not want to run report RSXMB_DEL_TO_ARCH, that would change status of all messages with DEL status to ARCH.
Is there a way to Cancel or Change the Status of this single message?
Regards
Sudheer

Hi Hareesh,
Tried that too, but to no avail.
Strangely, the log shows NO_ERROR_STATE for the cancelation of this message thru RSXMB_CANCEL_MESSAGES.
But in SXMSPMAST table the status of this message is 14 (System Error - Manual Restart Possible).
Regards
Sudheer

BPM Error: Message has error status on outbd. side

Hi,
BPM overview:
Receive Step -> Transformation Step (1) -> Send Step ASYNC (1) -> Send Step SYNC (1) -> Transformation Step (2) -> Container Operarion Step (1) -> ...
Error Message in SXMB_MONI: Message has error status on outbd. side
- <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_BPE-ENTER_PLSRV">
<Trace level="1" type="T">--start sender interface action determination</Trace>
<Trace level="1" type="T">select interface MI_BPM_TRAN_EMP_DETAILS_FILE_OUT_ASYNC*</Trace>
<Trace level="1" type="T">select interface namespace urn:tranbpm</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--start receiver interface action determination</Trace>
<Trace level="1" type="T">Loop 0000000001</Trace>
<Trace level="1" type="T">select interface AI_BPM_TRAN_EMP_DETAILS_FILE_ASYNC*</Trace>
<Trace level="1" type="T">select interface namespace urn:tranbpm</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--no sender or receiver interface definition found</Trace>
<Trace level="1" type="T">Hence set action to DEL</Trace>
</Trace>
I am don't any Interface name MI_BPM_TRAN_EMP_DETAILS_FILE_OUT_ASYNC* in my scenario, the actual interface name is MI_BPM_TRAN_EMP_DETAILS_FILE_OUT_ASYNC does BPM adds a '*' at the end of the interface name.
In the workflow log it shows that "Transformation Step (2)" has error. I am using multimapping in the transformation step.
Any help would be greatly appreciated as I ran out ideas to fix this issue.
Thanks in advance.
Sarvesh

The issue was with the step "Transformation Step (2)" and I fixed it in the mapping.
When using two send steps "Send step (1)" & "Send step(2)", BPM is executing the second send "Send step(2)" before it completes the first send step "Send step(1)". The first "Send step(1)" inserts the data into the database table and the second "Send step(2)" retrieves the data inserted in the first send step.
If I insert a "Wait step" between the 2 send steps it working. Can anyone explain how the send step in BPM works.
I did post the same question in "Exchange" forum also so that it can be view by more people.
Thanks,
Sarvesh

POSDM TIBQ entries in error status

Similar Messages

Maybe you are looking for