POSDM

HI experts,
After enabling POSDM content in BI, link for *SAP POS* is missing    (POS Data Warehouse Management -- POS Inbound Processing -- Integration with Other SAP Components ---SAP POS )
Pls tell me  the solution to get the missing link.
regards
abhishek
Edited by: abhishek011 on Jul 2, 2009 7:18 AM

Hi,
Did you already find a solution?
Please let me know.
From the content there are no InfoPackages available. Do you have the same?
Regards,

Similar Messages

  • How can I generate IDOC(WPUUMS) from XML file in POSDM or in SAP Retail

    Hallo Retail expert,
                                I have following scenario,
    I have Retail Store who send me their daily sales report through Wincor Nixdorf Point of sale. There i am using standard POSLOG2 to SEEBURGER(its a middleware which act as Converter) xml format and then i post that data first in POSDM and then with BAPI i transfer or book that data to SAP Retail.
    Above is the one scenario which is working.
    This is the Second scenario.......
    I have some external Retail store, they dont have Wincor Nixdorf POS, so they send me their Sales Report through SEEBURGER(its a middle Hardware which act as Converter) and SEEBURGER Convert that Sales data to XML format. My question is....
    How can i upload or Convert a XML File into IDOC (WPUUMS)in SAP or in POSDM?
    any new suggestion are welcome.
    Thank you all in advance.
    regards,
    Niel

    Hi,
    1. To get the required XML Schema, use transaction code WE60 to go to the IDoc documentation -> enter the IDoc type you want to use (WPUUMS01). Flag control and data record. Then display the XSD by choosing Documentation -> XML Schema from the menue bar. Now you can donwload the XSD for usage in Seeburger.
    2. Create your mapping from the POS format into the IDoc XML format in Seeburger.
    3. Create an XML File Port in ERP or POS DM using transaction code WE21.
    3. To inbound the XML file from Seeburger into POS DM or SAP Retail Seeburger should trigger the function module EDI_DATA_INCOMING. Parameters for this FM are the Pathname to the XML file and the Portname you just created. Based on the port name the FM can derive the port type xml and the data will be handled as XML data.
    Regards Carsten

  • Setting aggregation level in POSDM

    Hi experts
    I would like to consult from you regarding SAP standard function on aggregation level to be set in POSDM.
    The requirement I get is to aggregate sales in the level of day/store/article/promotion ID.
    Are there any solution to this in terms of configuration?
    Really appreciate your help.
    BR
    Dominic

    Hi,
    Aggregation Method plays a key role in terms of One-Step Processing Tasks.For eg.,if you want to Generate WPUTAB Idoc and there is an aggregation Method code which is specifically available to have the aggregation done based on the means of payment.
    SImilarly you can have aggregation method based on material,by sales item and qualifier and also with material&Conditions combination.
    You can see the difference when you choose 0000 - Code for Aggregation method for Task code 0013 - Generate Idoc WPUTAB and process.Later on change the Code for Aggregation Method to 0005 and you can see if in POS Workbench also.
    NOTE : You can also custom specific Aggregation Method - for eg, Aggregation should be done based on transaction type/sales item type etc.
    Thanks and Regards,
    Ramesh D

  • Problem in value mapping in POSDM configuration!

    Hi Experts,
                              I am sending data from POS to POSDM. I hav used standard name spaces like GM store Connectivity, BI and Store Connectivity 2.0. I hav also done settings in ID . Made a File adapter and RFC adapter and RD, ID, SA and RA settings.
    Data from Sourse: GMTLogTransaction_out is going to the RFC :/POSDW/CREATE_TRANSACTIONS_EXT  .
    So I hope users can Understand I hav used standard mapping.
    Now the issue is in the source structure a perticular field called TENDER ID is mapped with Target Field :Tender Code.
    But there is a value mapping in between.
    The name of the source Agency is IXREtailPOSLogRetailTransactionTenderID  and schema is IXRetailPOSLogRetailTransactionTenderIDSchema  and 
    The name of the Target  Agency is POSDWTENDERTYPECODE  and schema is POSDWTENDERTYPECODESCHEMA.
        And the Value mapping Context is : http://sap.com/xi/XI.
    The problem is I can see this , but I cant assign any value as it is in disabled mode in Messege mapping.
    Again In the ID I cannot see this Value mapping , which I expected to see and maniputale.
       experts, please tell me hw to I use this  manipulate / incert some values so taht the input when 01 becomes 3101 at output.
    If any doubts/ querioes, pls revert back.Please note , I am using all standard components in IR.
    Regards,
    Arnab .

    Hi Arnab / Abhijith,
    I am also going to work on the similar kind of requirement which u guys  have worked.
    Pos( third Party)->PI>POSDM-->IS-Retail ( Inbound)
    IS-Retail-> PI->POS( third Party) ( Outbound)
    Appreciate if you could help me with some clarifications..
    1) What transactions we can update to POSDM..?
    2) Does we need to POST all POS transactions first to POS DM and then IS-Retail ( Inbound).?
    If that is the case, once transactions posted in POSDM, does we need to do any settings to post idocs automatically to Retail system .. (OR) do we need to develop interface again from POSDM>PI>IS-Retail.( please clarify).
    Please suggest .. is it feasable to post only Non aggregated data directly to POSDM and Aggregated Sales ,FI , GRNs to directly to ECC.( Based on client requirement ).
    Awaiting for your suggestions.. Please suggest the best appraoch
    Thanks & Regards,
    Suman

  • How can I do a full POSDM extraction?

    Hi,
    I'm working in one dataflow that extracts data from POSDM (datasources 0RT_PA_TRAN_CONTROL and 0RT_PA_TRAN_TOTALS). I have seen that for these datasources is not possible to do full loads, and the only way to extract the data is:
         1. Init without data transfer
         2. Delta loads
    Now I have to delete the data of the DSO, and I want to do a reload of all the information. If I do this, when I do the init without data transfer I will lose all the previous data and I will only be able to get the data created after the init.
    Can I recover this information somehow? I canu2019t use the PSAs because some of them have been deleted.
    Thanks,
    Gonzalo

    hi,
    Welcome to SDN.
    Not sure if this can be helpful. you can create a new ODS/Cube and load the data from the existing DSO.
    Then you can delete the data as per your need , then do a full load from the new ods and then init without data transfer and delta from your datasources.
    hope it helps,
    Parth.

  • POS XI POSDM integration

    Hi Experts,
                         I am into POS XI POSDM integration . My queries are,
       1. Is there any specific forum in XI where I can get in touch with those, who have undertaken the following type of integtarion.
        2. My scenerio is File 2 XI to RFC adapter. I am getting an error in SXMB_MONI as " Root Cause: javax.xml.transform.TransformerException: com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 4d, 20, 30(:main:, row:1, col:3) at com.sap.engine.lib.jaxp.TransformerImpl.transform(TransformerImpl.java:255)................".
    I believe taht the file I am sending is not matching with the mapping . Pls comment, pls tell me if u need any further info.
    You can see the word doc with settings , if u want, pls tell me if u r also experienced in POS - XI - POSDM integration inbound, 2 b more specific.
    Regards,
    Arnab.
    Hi experts, I was expecting some reply.
    And pls , no links to ECOVERSITY. I am already in touch with them.
    Edited by: Arnab Mondal on Feb 16, 2009 1:22 PM
    Edited by: Arnab Mondal on Feb 16, 2009 1:22 PM.
    Error during dry testing in Messege Mapping is "Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XMLParser: No data allowed here: (hex) 4d, 20, a(:main:, row:2, col:0)".
    Showld I consider this as error in the load as its format is not matchin with the messege mapping SOurce Structure?
    Edited by: Arnab Mondal on Feb 16, 2009 1:38 PM

    Hi Hetal,
    Answer to ur queries.
    Can you just let me know that what is format of your file?
           The format of teh file is .DAT.
    You all can take a details look at teh file , as well as error taht I am gacing in the follwing url.
    http://sapknowhow.ecoservity.com/forum/topics/pos-xi-posdm-r3-integration?page=1&commentId=2328205%3AComment%3A2942&x=1#2328205Comment2942
    Reply by Arnab on February 12, 2009 at 7:21am .
    See the ID settings ZIP file.
    and have you used FCC in File adapter?
    Yes .
    If yes, what are your settings?
    ROOT.fieldSeparator                      ,
    ROOT.fieldContentFormatting      trim
    ROOT.endSeparator                   'nl'
    ROOT.missingLastfields             ADD
    ROOT.processFieldNames         fromConfiguration
    ignoreRecordsetName     TRUE.
    Pls tell me where am I going wrong.!

  • Using Enterprise service for POS integration to POSDM

    Hi
    I have few question on using Enterprise Service  for POS Inbound .
    1. Is it possibe to get this XML schema for Enterprise Service
    2. Lets say we have to use a third party POS to  integarte POSDM via PI. But then if we don't want to do any transformation in SAP PI,  then can we use the following option:
              SAP POS sends the data in the ES XML format
              SAP PI just transports this to POSDM
    I do see some drawbacks of POS sending the data in  the ES service format. As this means, if any change needs to be done based on any new requirements, we need to change the source code. However the above option should still be technically possible?
    Any reference if the above approach had been used in any projects. We have always used the following flow:
    POS--> PI---> POSDM . PI to POSDM is through the RFC /POSDW/CREATE_TRANSACTIONS_EXT.
    Regards,
    Fazila

    Hi Fazila,
    The ES bundle "PointOfSaleTransactionERPBulkCreateRequest_In" can be used to transfer POS transactions to POS Data Management directly.
    In order to access the above-mentioned ES, please use the Integration Builder in your PI system in transaction SXMB_IFR and follow the link to the Integration Repository.
    This structure can be enhanced to capture additional information.
    Award point if useful.
    Regards,
    Ramki

  • POS and POSDM

    Hi - what is the difference between POS and POSDM ? There are POS datasources such as 2LIS_40_REVAL etc for POS and then there are 0RT_PA_TRAN_CONTROL for POSDM ? In what ways these are related and how ?
    Thanks a lot.

    Hi anu
    POS datasources are the older version datasources. such as 2lis_44_posrec and one more i dont remember. But 2lis_40_reval is LO' cockpit datasource.
    In BI 7.0, POSDM is incorporated with the statndard datasources to which the data is fed by some interface like XI or websphere or biztalk and so on. And these datasources 0RT_PA_TRAN_CONTROL will populate the data into rsa7 of bi and then load to BI cubes.
    Regards
    Srikanth

  • Line item details of transaction in SAP POSDM

    Hi ,
    Can any body please tell me how to get the line items value of a particular transaction in POSDM. I think there is a Function Module that should be used. Can anybody please tell me the Function Module name.
    I have to get the sales value of each line item in a particular transaction in POSDM.
    P.S. I am an Abapper.
    Thanks in Advance !!
    Mayank

    Can you please tel me how you solved this issue?
    Edited by: Saranyadevi on Oct 10, 2010 10:08 AM

  • Unit *** is not created in language EN - POSDM in CAR 1.0

    Hi all,
    I am getting the error message "Unit *** is not created in language EN" (Message no. BM305), while creating POSDM transaction.
    I did set up and loaded data into BI components 0MATERIAL, 0PLANT, 0RPA_MEAN, 0MAT_PLANT & 0RPA_MARM.
    I have verified that tables T006 & T006A are having Unit of measure 'EA' with language English.
    When I used Tcode 'CUNI' and gave source and target language as EN. I am getting error message 'Could Not Save Target Text'. But this would not be an issue I guess, because I have verified a working system source/Target were not maintained there.
    Please let me know if any further setting to resolve the issue.
    Thanks,
    Venkatesan

    Thanks Vikrant for your reply.
    Actually I have used flat file upload, and ensured that the Infoobjects are mapped properly.
    When I use POSDM Workbench, I am getting error like 'Unit EA is not created in language EN'. T006/T006A are having UoM in language EN. Is any other common setting I am missing here?
    0RPA_MARM - has only attributes? Do I need to upload TEXT for this object?
    Thanks,
    Venkatesa

  • IS-Retail POSDM- double posting of  material documents and billing document

    Hello All,
    I had initially posted this question in "Industries Solution General" forum. Reposting it in the appropriate forum-
    We have a nightly job for program "RWPOS_PARA_ENQUEUE" which processes all WPUBON idocs (sales info) that comes in from POSDM. Sometimes we have noticed that for one idoc 2 material documents and 2 billing documents are being created with the same information.
    Note that this happens sporadically and we have no idea why or when it can happen. Also, we have duplicate checks in POSDM and this happens only when the idoc flows into ECC from POSDM i.e. one sales idoc posts 2 sets of documents for no apparent reason. Is there any way to prevent this? Why is this happening? Your inputs will be really appreciated.
    Thanks,
    Smitha

    hi,
    Just go to FB03 click enter and then
    Company code
    Fiscal Year
    Ledger
    Document type against customer invoice DR and then if u hav an idea abt the customer invoice doc then give doc number ....other excute and search for the customer no....
    And then double click on the document
    then goto ENVIRONMENT -
    > Document over view -
    > relation ship brower click
    then you can see all the relating document to that account  i.e account doc,profitcenter doc ,material ,oytbond delivery doc ,billing doc etc...
    if useful assign points.....
    regards,
    santosh kumar

  • Retrigger an Inbound IDoc to Become an Outbound from PoSDM to ECC

    Dear PoSDM Experts,
    I'm trying to browse and search for solutions on whether retriggering the inbound IDoc to an outbound IDoc from PoSDM to ECC without changing its details and had no luck.  The scenario has no aggregation and it is merely passing through PoSDM. I understand it doesn't seem practical because we can point the IDoc directly to ECC without passing PoSDM. The full scenario is an inbound IDoc is created in PoSDM coming from PI and the same IDoc will be triggered and pushed to ECC without changing the details. Sample IDoc would be WPUUMS, WPUBON and WPUTAB.
    Please let me know if the above scenario is possible without enhancement. If it is possible, kindly provide me how I should execute it in PoSDM.
    Kind regards,
    Mark

    Hi Mark,
    Well if that is the case then I will suggest you to go with custom development.
    Create Z tables for storing Inbound IDoc data  in POS DM.
    Write FM to process your inbound IDocs in POS DM Z tables.
    Write FM to generate your outbound IDocs from POS DM Z tables.
    Thanks,
    Vikrant.

  • XI to POSDM

    Hi
    1. How does data is sent from XI to POSDM. I mean like should we execute any job in POSDM to pull the data from XI.
    2. How does data integrity is done in POSDM? Is POSDM mechanism is same as LSMW?
    Regards
    Annie

    Hi Annie,
    do chk this link
    SAP POS DM: Which type of IDoc should be used in POS DM inbound?
    https://www.sdn.sap.com/irj/sdn/advancedsearch?query=xitoPOSDM&cat=sdn_all
    Regards
    Sampath

  • POS - XI POSDM - R/3 Implementation.

    Hi experts,
            Currently I am into the POS - XI POSDM - R/3 Implementation scenerio.I hav  doubts.
    Data frow from POS to XI to POSDM to R/3. . Similarly data from R/3 to XI - POS.
          I wish 2 know from the experts, wether they agree with the  use of Store Connnectivity2.0 in XI. In that case , I see there are around 30 standard mappings in that SCV Connnectivity .
        currently I am also  goin through a document called SAP Business Package for Store Connectivity
    POS Integration Configuration Guide. But I wish to know,,, that if i follow the SCV Store Connectivity 2.0, then I think I wont hav any option for Z development, as all 30 mappings in tehm are NON Editable....
       axctually I wish to speak more on it wid som expert who has alreadyy carried out the process.
    Is there any expert, who has any such experience exposure?
    Regards,
    Arnab.

    Michael / All ,
                          thanks for the reply. I just wanted to confirm my concept, wether or not at all it is possibe to edit standard components, like Store Connectivity, was just wondering, might there be such functionality.
    Actually  was lookin for som 1 who has worked in such a scenerio.
    I needed to know,, If a perticular standard mapping is satisfyin the business requirement, say the source and targets are fine, and the source fields and target fields are satisfyin the business, and I can see all necessary stuff like data types to intrface mapping all OK in the IR, then , if i wish to use this then , should i start with development of Business System/ service , Technical Service in the SLD nad then do necessary CUSTOM settings like communication channels, RD, ID, SA, RA settings in ID?
    I mean is my vision / thinkng OK??
    Pls comment.
    Pls , if my query is not clear, then revert back with ur doubt!
    Regards,
    Arnab.

  • POSDM link missing

    HI experts,
    After enabling POSDM content in BI, link for *SAP POS* is missing    (POS Data Warehouse Management -- POS Inbound Processing -- Integration with Other SAP Components ---SAP POS )
    Pls tell me  the solution to get the missing link.
    regards
    abhishek
    Edited by: abhishek011 on Jul 2, 2009 7:16 AM

    Hello Abhishek,
    depending on the Release of BW Content in your BW system this customizing node might not be available. Please upgrade to the latest release of BW Content or the release provided in the Config Guide for Store Connectivity Content (or above).
    If the problem still exists after that I'd recommend to raise an OSS.
    Regards,
    Stefan

Maybe you are looking for