Position id is blank-t.code CN43N-WBS element

Hi All,
The position id has been updated in the WBS element master data however the Position ID not displaying in T-code CN43N.
Please let us know, is there SAP note have to implement for the same.
Best Regards,
Chinna

Hi,
In CN43N output, press 'Change Layout' button and include Position ID in you layout. Its available in standard report, no development or notes reqd.
Regards
Shrikant

Similar Messages

  • Change WBS element short ID

    Hi,
    I am facing the following problem.
    In transaction code 'CJ02', WBS element 'A.000690.0002' is changed by mistake to 'A.000722'.
    When the user tries to put back the same short ID   'A.000690.0002' , he is getting the following error.
    'WBS element A.000690.0002 version FREI_VERSION already exists'.
    Can anyone help in resolving the issue.
    All the help and efforts will be highly appreciated.
    Regards,
    Ranga

    Hi,
    Customizing is most likely set to make a status - triggered project version automatically. Once this version is created system will not allow you to make a WBS with the same key, though in the operational project a WBS with that key no longer exists. If you run CN41, opting version data in DB profile and inputting version key in selection screen, you should be able to see this WBS.
    Hence there seems to be no remedy for the problem.
    Muraleedharan.R

  • WBS element change

    I have a question for the project system,
    As a part of restructuring process I have to open some of the WBS element of co.code 0400 to co.code 0015, from the 01/01/2007.
    Is it possible to change the co.code in WBS elements of co.code 0400 or  i should create new wbs elements by copying from co.code 0400 and then  assign them to co.code 0015

    Hi,
    I would transfer it to new wbs-el. too - as Jonathan said.
    Andreas

  • Material no link with WBS element

    Hello Expert,
    Any chance that this requirement can be set up? I tried to check config but nothing shows to achieve this.
    Objective is that when user select material no during PR creation,  the respective wbs will be defaulted as well during PR creation.
    Thanks in advance.
    Rgds,

    Hi,
    I think there is no stander way for same,
    can you check from PS side,
    I think In PS we can assign Material code to WBS element,that thing may help you,please check from PS consultant
    Regards
    Kailas Ugale

  • WBS element field blank in MB51 report.

    Dear Experts,
    I m using ECC 6.00 EHP4, My problem is we issue the project material with movement type 221 Q but in MB51 report if I want to get the output with WBS element with Movement type 221 q data is not showing if I give only movment type 221 Q and WBS field blank than in output screen WBS fileld shown blank please clear me where is the problem..
    Neeru

    Anyone please...
    Neeru Dimri

  • How to prevent WBS element for other Company code to be used in WO

    Hi,
    I am new to this forum and want to try this out.
    This thread is regarding: Area: plant maintenance, create/change work order, message control in wbselement in tab "Addit data"
    Detailed explanation:
    In our SAP system we have the functionality that when a user enters a wbs element in a Work order (Addit.Data Tab) he gets an error message CJ065 if the WBS element is from another Controlling area.
    We want in addition the functionality: show error message CJ 066 when the WBS element is for another Company code.
    I have searched in message control within PM, but here is only allowed to enter messages for application area IW.
    I have also tried to search for other message classes without finding where in customizing to maintain message class CJ.
    Please help
    Best Regards
    Ellen

    Thanks for your feedback Narendra,
    I have thought of that solution (using customer exit at save), but hoping maybe there was a setting in Customicing eather in CO or in PM to make message CJ066 appear. When looking at the source code it looks tlike there is a setting in customizing to be triggered, but I cannot find out where..
    BR
    Ellen
    Edited by: Ellen Ødegaard on Apr 29, 2008 2:08 PM

  • Who's Who tab - Position field empty/blank in ESS

    Dear Friends,
    I am facing a problem in ESS->Employee Search -> Who's Who tab
    The 'Position' field is 'Blank' on the Webpage when an employee is logged in. All other fields are displayed on the screen like First Name, Last Name, Organizational Unit, Cost Center, Job, Personnel Number, E-mail ID, etc.
    Can anyone please suggest me, what should I need to fix this problem...
    Appreciate early responses.......
    Thanks,
    Sai Narayana
    SAP Functional Consultant

    We are getting the emty pages when we click on address/banks or any other links from ESS. Our portal is in 7.0 with ERP 6.0 with Business Pacakge 1.0.
    I have checked the JCO connection, it is working fine and also setup system for webdynpro with alias SAP_WebDynpro_XSS.
    I am not sure what we are missing here. Anyone helps would be really appreciated.
    Thanks

  • Blank Tax Code in Travel Management

    Hi all,
    Is it possible to define a blank tax code (no tax input) in Travel Management? It is a required field in the config and I can't seem to leave it blank. My FI consultant is telling me that it is a SAP standard where if it is blank it means there is no tax input.
    Please help.
    Regards,
    Eric

    Hi,
    I can't select "no input tax" from V_706D_B as I also have some expense type that have input tax. According to my FI consultant, a blank in the tax code means it is not applicable to tax. But in Travel Management, I cant put in a blank in the tax code. Is there a way to put blank for the tax code or I have to define a "No Input Tax" tax code?
    Regards,
    Eric

  • Trasaction code for invoices detail which has hit the WBS element

    Hi All
    Usually my users receive a list of assets which were capitalized from AUC account through Project system.
    Generally charges are posted to WBS element and then users capitalize assets using that WBS element through settlement.
    Users have been asked to give all the invoices detail which has hit the WBS element from which that particular assets have been capitalized. is there any transaction code to get the all invoices detail which has hit the WBS element from that particular assets.
    thank you

    If that is what you want then why are you using WBS element?
    You can directly create the asset on goods receipt via MM module and then the invoice will automatically go against that asset.
    If you still want to use the WBS element for capitalisation then you can use the WBS element statistically with a type 90 cost element posting and the sset will still be crteated when goods receipted/ invopice receipted

  • Change WBS code to WBS description in CJ30

    Hi All,
    How can we change the layout from the WBS code to WBS description, because in CJ30 it shows that the WBS with no WBS description . It make the user confuse when put original budget.
    Cheers,
    Nies

    Appreciate ur advice.
    How about this report S_ALR_87013558 ...can we make the description longer.
    Sreenivas, could you advice me in my thread....which i am asking about WBS and WBS + network..please..
    cheers,
    Nies

  • Change field "company code " in  WBS

    Hello ,everyone:
         How can i change the field "company code " in WBS  after   distribution budget .    Although i've reversed  the budget,the field value can't be changed.
    Regards in advance.
    Orange

    Dear
    First u have to remove all budget from WBS then run OPSX for that WBS.
    Now u will able to change Co. Code.
    It has been tested & found ok pls. do it.
    Regards,
    Vishal Kr. Sharma

  • How to change Investment program position assignd to a wbs element

    Hi all,
    Could you please help me to find out which bapi can do necesary changes for a particular wbs element like investment program position and year.
    The Investment position and year can be showed in cj02 transaction for a particular wbs element.
    Thanks in advance,
    Sourya Prakash.

    Hi,
    You can use BAPI_PROJECTDEF_GETDETAIL to get relevant details. If that does not serve, you can go through the list available on this link ---
    http://wiki.sdn.sap.com/wiki/display/PLM/HowtouseBAPIinProjectSystem+Module
    Thanks.
    Kumar Saurav.

  • Validating department in WBS element code with dept in Investment program

    Hello Guru's,
    While assigning Investment program, in WBS  in CJ20N or CJ11, in our current business process we need to to validate the Department code in both WBS code and Investment program code.
    At present we have planned to used same department code in WBS Code and Investment program code.
    Need to to do this enhancement for our current project.
    Please suggest the way to do it.
    Regards,
    Amlan

    Hi,
    I assume this "Department Code" is one of your customer specific field that is made available both in WBS as well as the iM program. If that is the case then either you can use any of the user exits for the WBS Elements to write your code or create a validation for the WBS and put your code in one of those exits invalidation.
    Regards
    Sreekanth

  • Blank asset code

    Dear Sir,
    IS there any T.code from where I can get the Blank asset code list in which no activites done so that we can use those assets in some other works.
    Thanks
    Raj

    Hi,
    U can try the transaction S_ALR_87012056 - Directory of Unposted Assets
    Cheers

  • I lost all my apps start up is blank got code ox80070005 how do i fix it

    i lost all my apps start up is blank got code ox80070005 how do i fix it windows 8.1
    This question was solved.
    View Solution.

    Willie, welcome to the forum.
    I suggest that you do a System Restore.  This will take your computer back to a point when things were working properly.
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

Maybe you are looking for