Position not saved when battery dies

I got an old 2nd gen nano, that is permanently connected in my car.
I use it to listen to audiobook.
Problem is:
an hour after turning off the engine, ipod nano loses power (battery not holding charge), and next time I power the engine, nano comes back up, but has no recollection as to what was playing, or even if I choose manually the track - position is lost
any way to 'bookmark' or 'save' last position?

Youve got to be kidding me.
Are you being serious?
The problem is not that the battery sometimes runs out.
The problem is that the SIM is not recognized when it does.
Its not "bad" or "wrong" or "improper" for your phone to die.
Why am i having this absurd conversation?
Twilight zone...

Similar Messages

In a adress board the website is not saving, when i clink on arrow in a panel board this is blank

In a adress board the website is not saving, when i clink on arrow in a panel board this is blank

The only difference I see between looking your site between Firefox and IE is that Firefox is slightly less tolerant of a narrower window than IE but I don't see parts
missing they may be covered up but that happens on both browsers where the picture overlays wording down left side.
I can't really tell whether you are saying Firefox or IE is missing parts, but they look the same to me. First time looked it like Firefox was missing portion but it was just dropped down for some distance text and pictures were not missing.

I loose everything when battery dies

When my battery dies, the computer does not sleep but rather powers off.
Sometimes (not often) the light under the trackpad is lit like it is asleep, but it will not wake, I have to hold down the power untill it is off then reboot.
Usually what happens is the battery dies and the computer turns off (no pulsing light), and I loose all my open windows and stuff I havn't saved as if I had manually turned it off.
Also, when the battery dies, attaching power will not allow me to instantly restart. I have to let it charge for about 10 minutes before it will turn on.
Hardware check thing, says there is nothing wrong.
Any ideas?

It is two years old, but still holds 1872 mAh and the cycle count is only at 278.
I never knew what resetting the PMU was but I read that page and I do it often. When the computer will not boot while plugged in after the battery dies I sometimes try that, but it doesn't help.
Also, quite often, my computer goes back to December 31 1969. But more often than I reset the PMU. Could this mean my PMU is bad?
Thanks for the help.

Volume control slider position not saved at exit

Just upgraded to 6.0.2.23 and when I started it for the first time, I noticed that the volume slider was pegged at max. Thought nothing of it and turned it down. The next day, when I started iTunes, I noticed that it was pegged again.
It appears to me that the position of the control is not saved any more. It was in the previous version and this is new.

Hello,
In Captivate 5 there is a volume control widget. Did you try that? Open the Widget panel (or the Widget Workspace), click on the button Browse, you'll find it in the Gallery, Widgets folder.
Lilybiri

Gnome 3.2.1 sleeps after login when battery dies

I'm on an hp mini and just noticed this (bug?) in one of the recent gnome updates. If I turn the computer off by command line or username dropdown, when I reboot and log in the next time it works as it should. However, if the laptop battery dies and linux is not shut down correctly, when I try to log in again it begins to load gnome, then dims the screen and no buttons or touchpad gesture will shake it from sleeping. After it fully enters sleep mode it can be woken up, requiring the password again after just entering it to log in, before actually loading gnome. I don't know if this is a bug or a setting that might need changed but any advice would be welcomed.

hadrons123 wrote:I don't know. Is there any particular advantage in keeping gdm?
Nothing... it is just a quirk of mine. If i have gnome, i'd rather install gdm over lxdm. However, if lxdm is better than gdm, there's no problem by trying it. Btw, i love lxde. It's just amazing how uncomplicated it is.
Regards,
Jaime

Wont wake up after forced sleep when battery dies

I have a new MacBookPro OSX 10.7.2 from the first day the laptop will wakeup from hibernation or sleep after the battery dies.
I try to let the battery cycle fully before plugging in and reguaarly the laptop shutsdown when the battery is low.
When i try to turn it back on it starts the wake up process with indicator bars showing progress, then it stops at about three bars and just beeps indefinatly until i power off the machine when i turn it back on it comes up but ive lost everything i was working on!
very frustrating, why wont it properly wake up after a low battery hibernation??!????

bradchand wrote:
I have a new MacBookPro OSX 10.7.2 from the first day the laptop will wakeup from hibernation or sleep after the battery dies.
I try to let the battery cycle fully before plugging in and reguaarly the laptop shutsdown when the battery is low.
When i try to turn it back on it starts the wake up process with indicator bars showing progress, then it stops at about three bars and just beeps indefinatly until i power off the machine when i turn it back on it comes up but ive lost everything i was working on!
very frustrating, why wont it properly wake up after a low battery hibernation??!????
Well the question is when this happened the first time and you lost everything you were working on why did you let it happen the second time or the third or forth and not plug the computer in.
It may be frustrating but there is only one person to blame and that is you. Not Apple and not the computer. As YOU knew exactly what was going to happen but you let it happen anyway.
The true definition of insanity is doing the same things over and over and expecting a different outcome.

Sales Order is not saved when defining a Print output and without Print output it will saved the SO.

Hello,
In VA01 when we create SO and define output type then Sales order is not saved,The error msg will display like " Order is not in the database or is been archived ".
But without defining output type SO will be saved.
So is there any ABAP Developement or enhancement?
Kindly Suggest.
Regards,
Abhishek K.

Hi,
Its something like SD_PARTNER_UPDATE...
Kindly see below screenshot for your reference.
Regards,
Abhishek .K

Changes to my bookmarks are not saved when firefox is restarted. I already tried deleting places.sqlite, but it is still doing this.

Since I downloaded Firefox 4, I have not been able to save changes to my bookmarks (this includes both adding new bookmarks or deleting old bookmarks). When I make a change, the changes are not saved the next time I restart Firefox. After doing a Google search I found a Mozilla help page that suggested deleting the place.sqlite file. After doing this, Firefox will save changes for a few days, but then go back to not saving the changes. I've done this twice already.

Sounds that you have cleanup or other security software that cause corruption of the file places.sqlite
You need to check the settings of your software and make sure that you exclude the Firefox Profile Folder to avoid such problems.
* http://kb.mozillazine.org/Profile_folder_-_Firefox

Attachment modifications not saving when routing document

The issue is that in some cases attachment file modification are not saved and forwarded to the next recipient when using the routing slip feature.
Here is the scenario:
A user sends an excel document as an attachment and routes to several users via the groupwise routing slip feature.
The normal and successful work flow is this:
Next user in the route recieve the email.
Opens the document (in excel) and makes some changes in the document.
They select save (not save as).
Then then click the "completed" check box to continue the routing.
The next user will receive the email and attachment and the changes will be included.
The issue is that in many cases (about 50% of the time) the attachement edits will not stick and are not included for the subsequent recipients.
I have done some experimentation and it appears to be related to how the groupwise client handles temporary files.
It looks like there are two different folders used - my documents\groupwise and user\local settings\temp\xpgrwise.
When it works it appears that "edits" are saved in the temporary files folder and then "re-attached" to the routed email.
And the temp files are deleted when the email is closed.
In the failed scenario the attachment file does not get deleted from the temporary folder (and edits are not forwarded).
It appears to me that there may be another "unknown" temp file folder someplace that is being referenced and causing the issue.
We are using groupwise 8 client by the way and I think the issue started after the version 8 upgrade.
Has anyone else experienced and/or resolved this.
Any help would be much appreciated.

jensenms,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

I am able to change and add bookmarks, but these changes are sometimes not saved when I restart Firefox.

Since updating to Firefox 4, changes to bookmarks are saved sometimes after restart, but not usually (maybe 25% of the time). The problem sounds exactly like what is described on the [[Bookmarks not saved]] help page, yet after making all the recommended changes, the problem persists. I have also performed the recommended actions on the [[Toolbar keeps resetting]] help page, with no luck there either.
The only other thing that I can think of that may be helpful is that I use Firefox Sync between two computers, and both seem to be having this problem.

I have some more information, in case it helps. During one Firefox session, I made about 8 changes to my bookmarks.When I restarted Firefox, the first few changes I had made were saved, but the rest were not. Additionally, the favicons that were present during my last session (that I hadn't had before that session) were reverted to the default favicon. I hope this helps!

Books are not saved when created with iPhoto 09

When creating a book, everything is normal but the book is not saved in the computer. So I have to finish the project and order It. The name of the book is still listed on the left but there's no photos or text. I also have a book that seems corrupted because when i try to open the file iphoto jams and i'm not able to remove the corrupted book because the file can't be opened.
Please help me

Welcome to the Apple Discussions. Sounds like a damaged database file. Launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select the last three options.
Click to view full size
Also what system and iPhoto versions are you running?
Happy New Year

Preference are not saved when leaving Photoshop elements 10

Hi,
Each time I leave photoshop elements 10 (bought on Apple Store), A windows says that I don't have the required rights and my preference are not saved. Each time I restart the program it is re-installing the effect as if it's a new install.
Any change done in preference window is not taken into consideration.
I understood that this is because Photoshop is trying to save on root directory, which is not possible as protected.
Anyone has a solution as it makes it almost unusable :-( How can I change the right or tell photoshop to save the preference file somewhere else?
I use Mountain Lion.
Thanks

I do not need to install when I get from Apple Store. When I start for first time after downloading, photoshop starts first by creating content and effect window. After that the program works normally.
Except when I want to quit, another window open telling me that I don't have the users rights to save my preference.
If I restart again Photoshop it restart from scratch and tries to re-install content and effects, which should only done once.
My problem is that I bought the version 10 in february this year and I was not aware that a new version was coming, so I don't want toinvest another 69 Euros....I would at least have my version 10 working properly.

Changes not saved when I open Firefox

I just had to get a new modem, and now when I start Firefox, my personal is gone. I also have speed dial and anything I've added to it is also gone. Any help would be appreciated!!

See http://kb.mozillazine.org/Preferences_not_saved and [[Preferences are not saved]]

The titles are not saved when i quit

After quiting FCPX the titles i have made are not saved for next time i open a project.
Some titles are saved sometime?

Using FCP-X 10.01, OSX 10.7, 27" iMac 2010, 12 GB memory
I am having the same problem! I am using the Lower Thirds Gradient Edge title and I do change the font from Futura to Comic Sans and change the text size. The 58 large font I change to 55 and the 37 small font I cange to 45 (in case that makes a difference). I have used this for many titles in my project and some have the problem, others do not. It happens, as you say, when you exit the program and then re-launch.
Sometimes the titles go back to the template "Name", "Description", sometimes the title stays as written but the font goes back the generic Futura, and sometimes the font changes to a different one that is close on the font list to the "Comic Sans" that I am using! I did find that if I move the text boxes so that they have any overlap then the problem happens every time. However, I have been more careful with that recently and I am still getting the problem sometimes. Doesn't happen with every title which is what makes it more puzzling.
I have now taken to exporting a project file as soon as I have completed editing (I have 16 projects in the movie I am making) so that I don't lose what I have done!
Any ideas out there?

Art work not saved when quitting itunes

Hi there,
Whenever I quit itunes, all of the album artwork I downloaded through "Get Album Artwork" is not saved, and disappears the next time I open itunes!
What is going on?
Is it to do with the file format? does mp4 not take art? help!
Dai

Yeah the same thing happens to me. It's just gone when i open itunes the next time. It does save random artwork though.
Anyone got any ideas?

Position not saved when battery dies

Similar Messages

Maybe you are looking for