Position Page Dimension in FR

In Financial Reporting (9.3.1), when i create a report with a page dimension, in the html version of the report, the page drop-down is always in the middle of the page. Is there a way to move and position this page drop-down to some other places, for example, the top-left corner or top-right corner?
Thanks

Hi
If you are asking what I think you are asking, i.e. "how can I get a PDF for just the 1 page that I have selected from the page dimension in a Financial Reporting Report rather than getting a PDF with a page for each member in the page dimension" then I'm afraid you can't.
FR sees members on the page dimension as part of the report and this has several consequences:
1. When you run the report you may notice it takes longer (particularly if there are a lot of members on the page) as data is retrieved for all members selected on the page dimension so that you can then quickly change from one to another without having to run further queries against the database.
2. You cannot then produce a seperate PDF for a specific member from the page dimension.
Have you tried moving the dimension from the page to the POV? You can only select a single member at a time in the POV and whilst this has similar opposite implications to those above I tend to find it works better and there is only one page when you convert to PDF.
Hope this helps
Stuart

Similar Messages

  • Financial Reporting 11.1.2.1 Page Dimension

    I am using FR 11.1.2.1 and connected to Planning. When I selected two dimensions in the page and preview the reports, the two page dimensions will be "combined" in one page filter. For example, if I set up Year and Period in the page, it will be FY11-Jan, FY11-Feb...etc. Is there a way we can keep the two dimensions separated as two filters? Thank you.
    Jerry

    Hi Mehmet,
    Thank you for your response. Sorry I forgot to mention that we were connecting to Planning, not Essbase. I recalled that this problem doesn't exist in the FR 9.1, but for some reasons it happened in FR 11.1.2. I will check the link you provided to see if there is any connection.
    By the way, do you happen to know if it's possible to separate the page filters defined in the FR? For example, I would like to have Year and Period as two different filters, not combined as one showing FY12-Jan, FY12-Feb...etc. Thank you in advance!
    Jerry

  • Images change position and dimension after client edits on admin console!

    Hi, 
    1. After my client uploaded his images onto the site using the admin console they changed position slightly and did not fit exactually into the image frames i had set when i first made the site.
    2. When i opened the site on muse and merged changes the images positions and dimensions changed even more than what was being diplayed on the live site? (E.g I originally had two columns of square thumbnails for some slideshows and now i have a single column of rectangle images)
    3. I republished to see what would happen it now displays the way it was diplaying in Muse. The site is: www.jacobbuckland.co.uk
    My understanding was that when i create an image frame or gallery in muse that any image uploaded via the admin console should fill that frame no matter what the size or dimensions of that image?
    Any help gratfully received. Thanks

    Our technical team managed to find the immediate cause for the problem, and a solution.
    According to them there was a corruption on a speciffic OLAP file. By deleting it, they allowed it to be recreated on the next application processing. The file in question was found in \Microsoft SQL Server\MSSQL.2\OLAP\Data\UGF.0.db\<APPLICATION>.38.cub.xml
    Where <APPLICATION> is the name of the problematic cube.
    After that everything is working.

  • Merge jpgs into a single pdf, but page dimensions? how to set...?

    I have merged a number of jpgs into a single pdf but for some reason it ends up being a strange page dimension - 23.6 in x 30.6 in. The jpgs were saved at a resolution so that they might print an 8.5 x 11 at 200 dpi. Is there a place you can set  these dimensions? I know it is quite easy to still make it print on a letter sized sheet but the ppl who I am sending the dosument to might be thrown off by the dimensions.

    I had a difficult time finding the answer on the web.  Finally found a forum with my answer to share with others facing the same issue.  Last entry worked for me.
    http://community.spiceworks.com/topic/213722-acrobat-9-pro-doesn-t-see-ms-office-files-whe n-combining-files

  • Financial Reporting Sorting with page dimensions

    I had a report that was sorting account by description, in ascending order.
    However, then I changed it and added the Entity Dimension into the Hierarchy and it removed the Sorting. I cant get it to sort again.
    Is this a function of FR that if there are page dimensions you cant custom sort, or is there something that I am missing.
    Any help would be great
    Thanks
    Edited by: user12262404 on Sep 15, 2011 6:18 AM

    Hi,
    Have you tried the following link?
    http://download.oracle.com/docs/cd/E12825_01/epm.111/fr_user/7000011.html
    Cheers,
    Mehmet

  • Planning menus driven off of the Page dimension controls in Smart View

    Apologies if this question is answered but I simply couldn't find an answer on the web, or in OTN, or on Oracle Support, or even (gasp) in the docs.
    With that preamble...
    I have a Planning form with popup/right click menus that, in a web browser -- IE9 in this case, can be called by right clicking on the row headers (or, with great difficulty in 11.1.2.2) the itsy-bitsy little Page dimension drop down triangles. Some (most) of the menus use the Planning Required Parameters feature to read row or page dimension members to pass the selected member as context to the new form.
    So what about Smart View? Ah yes, in Smart View the row header right click allows the menu that uses Required Parameters to drive, for instance, Employee Detail for an Account (Planning passes the Account to a new form). It works just fine. This is the same as IE9.
    But I simply cannot figure out how to make Smart View's POV display a popup/right click menu and of course pass that dimension member to the new form. Beyond reading the above sources, I tried just about everything i could think of in Smart View. Is it possible? If not, this would be a major bummer because the planners are not exactly in love with the ADF interface but do rather like Smart View.
    Fwiw, it is Excel 2010 and Smart View 11.1.2.2.300 (Build 070).
    Thanks,
    Cameron Lackpour

    Cameron
    I've not seen someone using a menu in POV (There could be valid reason for you doing it).
    11.1.2.2 If you are using an dimension in POV as required parameter IE shows it in POV, Smartview is not showing that option at all. (Right click on Form shows blank)
    I tried it on 11.1.2.3 to see something got fixed there (or updated) and found that right click on row shows the menu item (POV). (You don't need to right click on POV)
    Regards
    Celvin

  • What is a page dimension?

    What is a page dimension?
    What is POV dimension?

    A page filter holds filters of dimensions members for a given pivot table analysis.
    When analyzing multi-dimensional databases you're often reporting in pivot tables. Hyperion tends to use a Column, Row, Pages and POV pivot table layout.
    POV is a feature that filters the report like pages, but follows the user around as they open other reports.
    Brian Chow

  • Can I pass the selected member at page dimension to form business rule?

    I have a business rule which will be executed when the form get loaded, the business rule is very complex, so I want to narrow down the calculation by passing the selected member at page dimension to the business rule.
    For example, I have year as page dimension, and I only want to calculate the selected year at one time? How can I do it?
    I know runtime prompt, but I don't think it's a good way, since you need to select again.
    Thanks
    Tony

    You can use a variable and a run time prompt.
    You can set the business rule options in planning to "Use Members on Form" and "Hide Run time prompt"
    This way the page/pov member will be passed into the business and into the variable.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Selectively pulling members in dataform based on a page dimension

    Hi,
    I have an entity dimension having business units and location dimension having cost centers. for example,
    I placed --> just to show you the hierarchy properly and has no meaning to the dimension member. Hyperion planning version 11
    Entity(gen 1)
    -->X1(gen 2)
    -->X2(gen 2)
    ----->X3(gen 3)
    -------->X4(gen 4)
    -------->X5(gen 4)
    ----->X6(gen 3)
    -------->X7(gen 4)
    -------->X8(gen4)
    Location(gen 1)
    -->Y1(gen 2)
    ----->Y2(gen 3)
    ----->Y3(gen 3)
    -->Y4(gen 2)
    ----->Y5(gen 3)
    ----->Y6(gen 3)
    and when we do allocation, user will select the member in entity dimension which is a page dimension in a data form.
    Is it possible when he selects X4 it should only bring Y2 and Y3 from location dimension and when the user selects X7 it should only bring Y5 and Y6.
    If my question is not clear, please let me know. Appreciate your help. Thanks in advance.
    Sai

    Hi,
    Assuming you have locations* on rows and months and accounts* on columns for example, prepare and load below data for all entity-location combinations to essbase.
    Entity Location Period Data
    X4 Y2 BegBalance 1
    X4 Y3 BegBalance 1
    Make sure you load this to begbalance and a dummy account which I assume is not used in budget data collection.
    Place Begbalance as the first column on the form. Check "Suppress Missing Block" selection from form edit menu.
    Now whenever you change the entity from page, only associated locations should be visible in the form.
    Cheers,
    Alp

  • Change page dimensions to match an object

    Hello. If I bring in an object (e.g. a photograph), is there a simple way to have the page dimensions match the object?
    Currently I copy the dimensions of the photograph, select the page tool, select the page, and manually enter the new dimensions.
    Thanks!

    You're better off just selecting the bunch of images and Combine them Acrobat.
    What you can do is go into Acrobat
    File>Combine>Merge files into a single PDF.
    If the images are huge - then I suggest running a Batch action on the folder of images to save them to a new folder - perhaps reducing the size something more screen friendly, perhaps 400 px in height and at whatever resolution is appropriate.
    Basics of that are here: http://graphicssoft.about.com/od/digitalphotography/l/blps_batch.htm
    I don't think there's much need for InDeisgn here at all.

  • Labels before Page dimensions in Planning web form

    Hi,
    Is it possible to have the labels before the page dimensions in Planning web forms?
    Eg: Entity <Entity dropdown in Page view> Products <Product dropdown in Page view>
    I am using EPMA 11.1.1.3 version
    Thanks,
    Naveen Suram

    Hi,
    This sort of question was asked before, have a look at Data form customization
    There is nothing available out of the box
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Binocular Search for a Page dimension

    Hi All,
    For a project dimension defined as page dimension in the webform which have 120 members, Binocular search button appearing in the next to Page dimension drop down. But where as Department dimension having 46 members binocular search button is not appearing.
    Is there any criteria or setting in order to Binocular search button should appear for the page dimension in the webform?
    Thank you so much for your kind help in advance.
    Regards,
    tvmk

    Log in Planning
    Go to File->Preferences and select Display Option tab
    Set the value of Allow seach when no. of pages exceeds to 10

  • Referring to Page dimension in smartview using VB

    Hi,
    Is it possible to refer to one or more of the page dimension member using VBA code. The data form is opened in smart view.
    Version is 11.1.1.3
    Regards,
    Ragav.

    Thanks for the replies.
    @jpaul
    I actually ended up removing the PageSetup active area section, but now, no, there are no errors from the vi or from the AcitveX nodes when I highlight execution order.  I say that it isnt working because the page setup properties are not changing in the Excel file.
    Yes, I have been lazy about not closing ActiveX references, is there any disadvantage other than digging a memory hole?
    @drewsky
    I have alot of things coded and working, this is the only issue so far.  Its too late to turn back to templates
    Message Edited by ajckson on 06-10-2008 04:01 PM
    Attachments:
    PageSetup.PNG ‏10 KB

  • Hyperion Reports Page Dimension Auto Calc

    <p>In Hyperion Reports 7.x, is there a way to create an autocalculation in the page dimension?  Similar to rows andcolumns, I would like to create a "grand total" memberwithin my page dimension that is a SUM of any dynamically selectedpagedimension (when prompted to select any multiple members). </p><p> </p><p>Please let me know if there is a way to perform this function. If there is a workaround, I would appreciate anyone's inputas well.</p><p> </p><p>Thanks for your help!</p><p> </p><p>Ron P.</p>

    1) Click on the top of the column and then go to the column properties pane on the right. Go to the Suppression section and you have a coulpe of choices. You can choose a Basic option and supress if the column Is Zero and/or Missing values. You can also choose advanced options and click the setup button. A new box will open and give you the ability to set criteria for suppressing the column. For instance if member name of product selected is "Product1" supress, otherwise show the column.2) There is no option, I am aware of, to do this. A non-elegant workaround would be to highlight the text on the HTML page, copy and paste it into Excel. The new version of Hyperion Reports 7.2 now supports exporting reports from HTML to Excel with Formating. I'm not sure whether or not that means headings will be exported as well.3) You have to use the grid POV to do this. Move your mouse to the top left corner of your grid, where the rows and columns meet. Right click and select "Grid Point of View Setup...". A new properties box will open up where you can restrict the POV to specific members.Hope this helps.Regards,Gary CrisciSenior ConsultantPinnacle Group Worldwide

  • Use same page dimension

    Is there a way to pass a chosen page dimension to other reports? Example:I have choses a specific product page dimension for my first report, is it possible for subsequent reports to automatically filter for that specific product on each report that the user views? Hyperion Analyzer 6.5 Java Client

    Hi,
    This post covers the same question - How to link Pages of Grids
    Ok?
    Cheers
    John
    http://john-goodwin.blogspot.com/

Maybe you are looking for

  • Assignment Number updation

    Hi, Scenario 1: Contract --> Invoice --> Credit memo Request --> Credit Memo. In the above process cycle, we have the contract number appearing in the assignment number field of the credit memo - As desired. Scenario 2: Sales Order --> Returns Order

  • Importing Application

    I have installed ApEx 2.2 in two different environments...both environments seem to function OK, except during import. One works successfully, the other throws an error: ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessf

  • BDC for PA30 action hire is not creating entry in IT 1001

    Hello All,    I created a BDC for to create hire action in system to create some dummy data, but its not creating entry in infotype 1001 for relation between person (P) and position (S). If i create entry in PA30 it create ebtry, if i try BDC in Dial

  • Motion 7.0 = 7344 no more found

    Hello, i just installed a PCI7344 and the Motion 7.0 . Now there is no more PCI7344 available in the MAX, well it is detected as a card, vendor is NI but there is not "motion device" folder and no 7344. MAX update (F5)  did not help. Renaming the dat

  • Address book damaged or incomplete

    I added a new email address (from a Chinese contact, so it may also contain chinese characters) using the auto add facility in the email address line and immediately my address book icon changed from normal look to outline with a 'no entry' symbol ov