Positions under Organizational Units.

Dear All,
I need to maintain a Ceiling for Organizational Units with respect to Positions.
For example :
There is a Org Unit - HR Dept , and it has a restricition of 25 positions.
So when i try to create a 26th position under this Org Unit ,it should show me "Error Message".
I have tried with Quota Planning, which is totally different concept from the above case.
Does SAP provides such option to restrict Positions under a OrgUnit..? If Yes, Pls Suggest me ...!!
Thanks in Anticipation
Best Regards,
A B H I

Do not know of any way to limit the number of Positions per Organizational Unit.  Not sure how or where you would even keep the numbers so that one org unit could have 25 positions and another org unit 40 and another org unit only 10.
What you want to control is the number of Persons - employees.  They cost you money, positions do not.  This is controlled by the number of Positions available - one Person per Position.  If you have control of your Organizational Structure maintenance, then you control the number of Positions you create for each Organization. 
Paul

Similar Messages

  • Positions under Org unit

    Hi all,
    How can I get all positions under orgunit?
    Per example: Org unit is 5000080, i like to know all position id's under this org unit.
    I was trying to use PA0001 but if person is not assigned, it is not showing position.
    Thanks
    Shiva

    hi,
      use HRP1001.......TABLE in which enter data like..........
      objtype =  ' o'....for organization unit..........
      objid =  '5000080'
      rsighn = 'B' ..which is top to bottom ....u can do reverse of it....bottom to top
      sclass = 's' position........
    u can see the position apply to all employee...........
    dont forget to reward points if helpful,
    Regards,
    Imran

  • 1 Position 2 Organizational Units

    Hi Guys,
    We are implementing SAP for a service industry. It is located in all over the India. Here 1 Position belongs to so many Organizational units (for example Sales employee (S) is working in Bombay (O), Delhi (O)......So how can I assign 1 Position to different Organizational Units.
    We assign employee depends upon Personnel area & sub area, in the same way I want to assign 1 position to different Organizational units so that If I assign 2 employees for the same Position in the Simple Maintenance Org Structure different positions to come with same Object number, in different Organizational units
    Please help me
    Regards
    Prasad

    Hi Prasad,
    Dont create 500 positions just create some positions make sure that each position is coming under each organizational units. and while Maintaing PA30 IT0000-Actions there you select individually for each employee where he is situated & organizational unit from drop down & save it.
    You can assign as many as employees for 1 position number
    Regards
    Pavani
    <b>Remainder: Points to be given on Answers</b>

  • Restriction for only one chief position per organizational unit.

    Hi
    Customer insists of having not more than one chief position in each org. unit.
    Is there any way that the system will block or give a warning while I am trying to mark an additional chief position for an org unit ?

    Hi Zeev,
    you need to create a user exit.
    Aranka

  • What are the infotypes should i maintain for  org units and positions in om. and how can i see positions under org units.

    can anyone help me

    Hi,
    It is depends on your requirement. compulsory info types are 1000 1001 1002 1003 1008 1018....
    go to pp02 and click on F4 option in IT field and Subtype field.
    Example:
    1000
    Object
    1001
    Relationships
    1002
    Description
    1003
    Department/Staff
    1004
    Character
    1005
    Planned Compensation
    1006
    Restrictions
    1007
    Vacancy
    1008
    Acct. Assignment Features
    1009
    Health Examinations
    1010
    Authorities/Resources
    1011
    Work Schedule
    1013
    Employee Group/Subgroup
    1014
    Obsolete
    1015
    Cost Planning
    1016
    Standard Profiles
    1017
    PD Profiles
    1018
    Cost Distribution

  • Usage of Department/Staff switch in Organizational Unit

    Hi All,
    Just would like to know the detail usage of the Department/Staff switch for the Organizational Unit. Currently neither the Department nor the Staff switch is selected for all the organizational units created. What would be the effect and impact if I set the Department switch for the organizational unit?
    Thanks a lot,
    Francis

    Hi Francis,
    A staff flag does not have to be marked as such. It does, however, influence the presentation of positions and organizational units in the graphic. Positions or organizational units marked with a staff flag are shown in the graphic next to their respective superior nodes. Without a staff flag they are shown under the superior node.
    As for the department,marking an org unit is optional and relates to integration.
    If integration with Payroll Accounting is active, certain records are written from Personnel Management to Master Data. If you flag organizational units as departments, only the marked units are written to Master Data.
    Marking units as departments makes sense when your organizational structure includes organizational units that are not actual departments (for example, a special project team).
    NOTE: In order for the department marks to be recognized, you must also make adjustments in Customizing.
    Department Switch in T77S0 (PPABT PPABT):
        o   0 = causes the organizational unit directly above a position     to
            be read
        o   1 = causes the organizational unit with a department flag
            (infotype 1003 "Department/Staff") above a position to be read
    Hope this helps.
    Regards,
    Arpita

  • Not able to update organizations units in an infotype 0001

    Iam unable to update organizational units, positions through lsmw in an infotype 0001 if i do manually it is updating in 1infotype.
    Iam trying to run reports rhinteoo still not able to figure it out
    experts share your experience on this

    Ran LSMW Record created successfully for position
    If I see in organizational Assignment Infotype The record is not displaying
    As per your email Iam trying reports to display organizational units for the positions
    RHINTE10
    Done Livrun
    Next step RHINTE20
    My position is not in the list that is 600450
    Executed RHINTE30 I wonder how do we come to know personnel number when we are recording positions and organizational units. Still i checked personnel number in organizational assignment infotype and executed but it is displaying No batch input folder created . Yes we didnt create any batch input for personnel  numbers we created batch input for positions and org units.
    I believe we need to run first two records
    After running above reports i checked in an organizational assignment Infotype . Still data is not updating what would be the cause please let me know

  • How to create Head of Own Organization Unit

    Hi there,
    I am trying to create Positions in Organizational Unit.I want to create one position as Head of Own Organization Unit.But the option for the same is grayed out and I am unable to do that.Kindly help me out.
    Thanks and Regards,
    Anita George

    Hi -
    I assume you are using the transaction, PPOME? Within the transaction you can create positions within org units by right clicking on the org unit and selecting create. Once the position is below the org unit, you double click on it to bring up the details below. You should then have the ability to check off the "Head of Own Organizational Unit".
    Thanks,
    Nick

  • In Organization plan, Can we assign an organization unit under a position..

    hi experts,
         In Organization plan, I want to assign an organization unit under a position..If possible, how?..
      For example HR dept and Purchase dept need to be assigned under a position say MD or likewise..
        Thanks in advance..

    Hi Ramesh
    Check this Link
    http://help.sap.com/saphelp_40b/helpdata/en/9d/9bd0348a955c0ee10000009b38f83b/frameset.htm
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/404169f4-6ddd-2a10-35a0-e4a5a7c539b2
    Hope this will be useful
    Regards
    Vel

  • Position under Purchasing Org.'s Org Unit

    Hi,
    SRM :5.5, extended classic scenario
    When I look at the SRM Org. structure, I see the Position (S) under Purchasing Org.'s Org Unit  ?.
    What is the use of creation of Position under Purchasing Org's Org Unit ?
    Note:
    I did HR Replication in the past. I used to see the Position under the Company Code's org. unit. So that when anyone in the SRM org. structure creates a SC, it follows the hierarchy for the approval.
    With regards,
    Pranav
    Message was edited by:
            Pranav

    Hi Pranav,
    We should understand that we have role of "Operational purchaser" and Strategic purchaser" within the typical purchasing organization. These are the standard roles supplied by SAP.
    If you think of some complex purchasing organization catering to the needs of group of companies then it may have more than 3-4 levels within (May be some additional customized roles). This will decide the approval limits, authorities, powers and roles.
    Therefore, positions within the purchasing organization are created to group different roles and functions. Even I have positions in my purchasing org.
    Assign points as applicable.
    Regards,
    Ravi
    null

  • Organizational Unit is managed by Position

    i want to know which organizational Unit is managed by which position i.e. which is the chief position in particular Organizational unit.
    In which table i can get this relation ship.

    hai..
    standard reports are available in easy access
    Existing Organizational Units (Report RHXEXI00)
    Staff Functions for Organizational Units (Report RHXSTAB0)
    Organizational Structure with Persons (Report RHXSTR02)
    Organizational Structure with Work Centers (Report RHXSTR02)
    Existing Jobs (Report RHXEXI02)
    Job Index (Report RHSTEL00)
    Job Description (Report RHXDESC0)
    Complete Job Description (Report RHXSCRP0)
    Periods for Unoccupied Positions (Report RHFILLPOS)
    Existing Positions (Report RHXEXI03)
    Staff Assignments (Report RHSBES00)
    Position Description (Report RHXDESC1)
    Staff Functions for Positions (Report RHXSTAB1)
    Authorities and Resources (Report RHXHFMT0)
    Planned Labor Costs (Report RHSOLO00/RHXSOLO00)
    Vacant Positions (Report RHVOPOS0)
    Obsolete Positions (Report RHVOPOS1)
    Complete Position Description (Report RHXSCRP1)
    Reporting Structure without Persons (Report RHSTR05)
    Reporting Structure with Persons (Report RHSTR04)
    Existing Work Centers (Report RHXEXI05)
    Work Centers per Organizational Unit (Report RHXSTRU06)
    Existing Tasks (Report RHXEXI04)
    Activity Profile of Positions (Report RHXSTR07)
    Activity Profile of Positions with Persons (Report RHXSTR08)
    Existing Objects (Report RHEXIST0)
    Structure Display/Maintenance (RHSTRU00)
    Reporting on an Infotype (Report RHINFAW0)
    Starting an HR Report (Report RHPNPSUB)

  • HR ABAP - Retrieving the list of positions in an Organization Unit

    Hi all,
    Could anyone let me know the procedure in retrieving the list of positions in an organization unit?
    Thanks,
    Raja

    Hi
           Go to
           SPRO->PERSONER MANAGEMENT->PERSONER ADMINISTRATION-->
         DEFINE POSITIONS
      There you will find all the postions.
    Thanks
    thiru

  • Mandatory Organizational unit when creating a position

    Hi,
    I would like to know if it is possible to make mandatory to create a relationship with a organizational unit when somebody creates a position using transaction PO13, or any other transaction.
    Thanks a lot,
    Mforman

    Hi Mforman,
    You can define the A003 Org unit relationship to position an "Essential relationship" and make it the next screen to be filled when creating a position (Table t77so). This, however, does not make the respective relationship a mandatory one as one can skip this relationship creation screen.
    Regards,
    Dilek
    Edited by: Dilek Ersoz Adak on Apr 1, 2010 7:52 AM

  • Retrieve chief position of an organizational unit

    Hi,
    I need to send a work item to the chief position of an organizational unit. Could anyone help me with the procedure to retrieve the same?

    Hi SS,
    Check out this link.
    Hope it helps.
    [https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/005a17b5-37df-2b10-44be-884917b52d3b]
    Regards,
    Raj

  • User under more Positions or Org Units

    Hi experts
    i'd like to know if there is a way (FM, Program, Transaction, BSP) to see how many Organizational Units or Positions are connected with the same User.
    I know that i can see it by PPOMA_BBP but it is not what i desire.
    regards
    andrea

    Hi
    As per standard SRM org structure, one user can hold in only one position at a time in the org structure. Are you facing any issue, please explain?
    Regards
    Kiran

Maybe you are looking for

  • How to deal with a lost phone?

    Just wondering about my options here. I purchased an LG enV® TOUCH in the middle of July 2010.  Today, I think I lost it somewhere on the college campus I attend.  My friend sent a text message to my number with contact information, and I sent anothe

  • [CS5][JS] How to get paragraph number?

    Hi, With this thread I would like to know if anyone has experience with automatic numbering and scripting. If you have a title with automatic numbering applied, how do you get the number from that title using scripting? I can't find any property cont

  • Dupilcate secondary IP's on 2 Hub servers for the Cas Array on VM ware 5.5

    I was told today that MS had worked with this company before and they may have recommended the secondary ip on the nic's to be the exact same address. We are experiencing issues with ping by name and ip that are not working or inconsistent. Even afte

  • Time Machine Volume and Disk Utility

    I'm trying to figure out whether or not I can use Disk Utility's Repair Disk command on a Time Machine volume. Time machine is taking a very long time to finalize its backups. I don't know if there are directory issues that need to be addressed or if

  • Classic 160 pauseing in middle of songs

    i have a classic 160 and it has started to pause for what seems like 30 seconds on a song after its been playing for a while ( about half an album). i don't think it's the mp3 cause i can restart the mp3 it pauses on and then it plays through fine. a