Positive for iphone 4
Well like most of u i was eagerly awaiting the iphone 4 and i have to say overall i'm pleased. I immediately bought a case at the time so never noticed the reception issue. Battery life is far longer then the 3GS, i've been using mine a fair amount for all sorts and the charge has so far lasted nearly 2 days and is still at 47%, pretty decent i'd say. Loving the new features, my only slight concern has been occasionally the screen doesn't seem responsive however i've realised that unlike the 3Gs, u have to touch it in exactly the rite place with a few things, however now that i know all is fine. So far one very happy customer
Well the "4" is not (to my mind) as sexy as the 3G/3Gs - it's certainly heavier!
Went online & registered, then updated & Synced..No Issues..(well just 1/had to activate & then Turn Off Airplane mode) Took awhile to set up to my own specs but certainly not difficult. Lots of buried settings, setting up WiFi & Car B/Tooth No Problems.
The battery does seem to go down a little more than my old 3G, but, I think that as it's new I am always picking it up & tinkering. Signal bars are more erratic but the calls still go through & are very clear. Screen is real sharp & the whole phone reacts faster to the finger touch..
I negotiated a free case with the AT&T store manager! so I don't have the "fingers touching antenna" issue..The free case is black silicon, and certainly takes away the Apple look" - some "cool" cases are coming on the market so I will probably wait awhile & get a designer" and a screen protector..Overall the "4" is OK...Wifey is happy with the 3G..
Our phones are "synced" ~ we are in the "cloud"......L
Message was edited by: elmac
Similar Messages
-
Best position for voice recording ?
What is the best position for iPhone to voice record (with official apple app) ? On its back side ? Front side ? Others ?
It uses the same microphone you use for making phone calls. Amny position that doesn't obstruct it should work.
-
How do I get my Fluid Grid Layout page to resizes from portrait to landscape for iPhones?
Starting in portrait on my iPhone 4, the fluid grid layout page does not resize when I turn to landscape. After I refresh / resize to fit the page on landscape and then turn the iPhone to portrait, the page resizes just fine. Everything seems to be working just fine on the desktop, ignoring IE. Could it be my media query tags?
If anyone knows a solution, it would be much appreciated. Thanks.
Here is my test page: http://www.bedroomandmore.com/1_b_fluidGrid.html
Here are my media query tags (the first set of rules does not have the media query tag and becomes the default):
@media only screen and (max-device-width: 480px) and (orientation : landscape) {
@media only screen and (min-width: 481px) {
@media only screen and (min-width: 769px) {
Here is most of my media query CSS:
@charset "UTF-8";
/* Simple fluid media
Note: Fluid media requires that you remove the media's height and width attributes from the HTML
http://www.alistapart.com/articles/fluid-images/
img, object, embed, video {
max-width: 100%;
/* IE 6 does not support max-width so default to width 100% */
.ie6 img {
width:100%;
/* Mobile Layout: 480px and below.(smartphone portrait) */
.gridContainer {
width: 95.4184%;
padding-left: 0.5907%;
padding-right: 0.5907%;
#header {
clear: both;
float: left;
display: block;
margin-left: 0%;
width: 72%;
max-height: 0%;
display: -moz-box; /* Firefox */
display: -webkit-box; /* Safari and Chrome */
display: box;
border: none;
top: auto;
padding-top: 0.25em;
#menuHorizontal {
clear: both;
float: left;
width: 118%;
height:100%;
margin-left: auto;
position:relative;
top:-1em;
display: block;
#slides {
clear: both;
float: left;
margin-left: 0.1em;
width: 119%;
position: relative;
top: -1em;
display: block;
/*Slides container: Important: Use position:relative; with top:-1em; together to position div.
Set the width of your slides container
Set to display: none to prevent content flash*/
.slides_container {
clear: both;
width: 100%;
display: block;
/*Each slide: Important:
Set the width of your slides
If height not specified height will be set by the slide content
Set to display: block for original setting
slide_container is container size
slides_container div set the size of the image inside--adjust to fit image in it so it is not cropped*/
.slides_container div {
clear: both;
width: 69%;
display: block;
/* Mobile Layout: 480px. (smartphone landscape)
Inherits styles from Mobile Layout 480px.
Set to clear:none; to allow div to shift up
Or set to clear:both; to take a whole row of the screen*/
@media only screen and (max-device-width: 480px) and (orientation : landscape) {
.gridContainer {
width: 95.4184%;
padding-left: 0.7907%;
padding-right: 0.7907%;
#header {
clear:both;
float: left;
display: block;
margin-left: auto;
width:100%;
display: -moz-box; /* Firefox */
display: -webkit-box; /* Safari and Chrome */
display: box;
border: none;
#menuHorizontal {
clear:both;
float: left;
width: 110%;
margin-left:auto;
display: block;
#slides {
clear:both;
float: left;
margin-left: 0%;
width: 68%;
display: block;
/*Slides container: Important:
Set the width of your slides container
Set to display: none to prevent content flash*/
.slides_container {
clear:both;
float: left;
width: 100%;
display: block;
/*Each slide: Important:
Set the width of your slides
If height not specified height will be set by the slide content
Set to display: block for original setting*/
.slides_container div {
clear:both;
width:69%;
display: block;
/* Tablet Layout: 481px to 768px. Inherits styles from: Mobile Layout.
Set to clear:none; to allow div to shift up
Or set to clear:both; to take a whole row of the screen*/
@media only screen and (min-width: 481px) {
.gridContainer {
width: 95.9456%;
padding-left: 0.5271%;
padding-right: 0.5271%;
#header {
clear:both;
float: left;
display: block;
margin-left: auto;
width: 100%;
display: -moz-box; /* Firefox */
display: -webkit-box; /* Safari and Chrome */
display: box;
border: none;
#menuHorizontal {
clear:both;
float: left;
margin-left:auto;
display: block;
#slides {
clear:both;
float: left;
margin-left: 0%;
width: 70%;
display: block;
/*Slides container: Important:
Set the width of your slides container
Set to display: none to prevent content flash*/
.slides_container {
clear:both;
float: left;
width: 100%;
display: block;
/*Each slide: Important:
Set the width of your slides
If height not specified height will be set by the slide content
Set to display: block for original setting*/
.slides_container div {
width: 100%;
display: block;I found the problem. There is a bug in Safari for iPhone 4. Use code to fix found at http://stackoverflow.com/a/6379407
-
Just downloaded the new OS for IPhone. Despise the appearance. It has jacked with the way I like things in some unacceptable ways. Is there any way to keep the OS, but return to the old appearance? Important to know BEFORE I download OS for computer.
I know I am responding to my own thread, but I an SOOOO disgusted with Apple right now.
The new iOS 7 was the lead story on CNN today... and it wasn't positive. Easy to see why, it's a graphics disaster. It is ugly, difficult to read, doesn't interface aesthetically with the iPhone 4S, and gives everyone in America vertigo. Either fix the appearance, or find some way to allow us to roll back to our previous iOS. Do so quickly, or this life-long Apple customer [circa 1978] will be moving on. If this represents shades of what is coming with OS Maverick, I am petrified. Further, I am a GM of a chain of newspapers and websites in the Austin, Texas area. I will be ripping out a scathing editorial. The notion that we can't roll back from something millions of us hate is despicable. I'm giving you one week. Be sure I am not alone. -
hi , i bought this phone from Dallas , TX on 22 jun 2012 , right now I am in india .
My phone Accidentally fall in water tub. And now is not working .
For iphone replacement ,I went to local apple store in Pune (India). but these guys are not helping me . And they are not ready to replace my phone .
I also tried contacting local apple employee named " RATI KALE " , but didn’t got any positive response.
I provided them apple invoice, passport, visa details, my air ticket details. but still they are not ready to help me . My phone details are as below :
Serial No:C8*******T9Y , IMEI : 01*************995
Please help me in replacing my phone.
<Personal Information Edited by Host>Your warranty is only good in the US where you bought the phone. You will need to contact Apple Support in the US to arrange to return your phone to the US for repair. You should also inquire as to whether they will be able to return the phone to you in India.
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Apple - Support - Contact Apple Support. -
Flash CC optimizing for iphone 5: How to remove black bars
iOS test app i created in Flash CC is installed and functioning fine on my iPhone 5.
However, the app is optimized for the 640x960 screen and not the 640x1136 iPhone 5 sceen.
I'm only testing on the device, not uploading to the app store.
Can someone please point me in the direction of the correct code to optimze for iPhone 5 for device testing only?
THX!This is really a loaded question. There's no simple answer and multiple strategies.
One strategy is the bleeding edge method. In that, you set the stage to scale NO_BORDER and exceed the stage in all directions with your artwork. That way it scales in aspect ratio to the device size but the images that bleed outside the edges of the stage will fill the black bar area. You then focus all your controls towards a designated 'safe area' for the device and assume the extra space may or may not be seen.
The harder but better method is NO_SCALE where you program like an Android device. You program your app so it detects the devices resolution and position all elements based on the available area. That means everything is constantly calculated based on available space, so it's a ton of extra coding, but it puts you in a very good port position for Android.
Bottom line, there is no magic bullet or Staples "Easy Button" to make your app work perfectly on all the (now) fragmented resolutions of iPhones/iPads. -
Best alernative headphones with mic rem for iphone 4s
Which are the best alernative headphones with mic and remote compatible with SIRI for iphone 4s?
Im using the a-Jays Four. They seem great, mic is supposedly same as the one on Apple's own headset. The position is the same (lower jaw) and all button commands for volume, skip, fwd, siri etc are the same as with the official Apple headet.
Sound is good enough for my ears and it seems to get the best reviews for any headet under £90.
Yes there may be some that sound better and you will hear many say that especially from bass heads but none that have the quality of sound and a mic and controls that work as simply as Apple's headset. -
Why does only one headphone work when i listen to music? I have to hold the base of the cord in a certain position for it to work, it does this with all headphones i try, what do i have to do?
You can try cleaning the headphone jack. However, I suspect that th headphone jack needs replacement.
Apple will only exchange your iPod for a refurbished one for this price.
Apple - Support - iPod - Repair pricing
A third-party place like the following is less expensive. Google for more places.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens -
Jabber for iPhone and iPad cannot receive calls
We currently have Call Manager 9.1.1 and Presence 9.1.1.
I am starting to use the Jabber Client for iPhone and iPad, but am having trouble receiving calls dialed to a particular extension.
If I can go settings for the iPhone Jabber client as an example, I am succesffuly connected to all accounts: IM, Phone Services, Voicemail, and WebEx.
When I go to the keypad, I can succesffuly dial internal extensions and make outbound calls to any numbers and they come accross as using my extension.
When calling the extension, my desk phone rings, but not the Jabber client.
Not sure what could be causing this issue to occur for Jabber not receiving the calls.
Thanks for any suggestions.
Paul GaydosShould still work. But would be good to check indial into jabber with the phone unplugged, just for testing purposes.
also, you have checked the partition and configuration on the TAB device is the same as on the deskphone?
Can you attach call manager traces when making a test call and attach to the case. Let us know the extension and device names you have used in the test, and a timestamp of the test.
thanks
=============================
Please remember to rate useful posts, by clicking on the stars below.
============================= -
All day calendar events not being displayed in the notification centre for iphone 5 post ios 7 upgrade. Please help. Is it a bug?
With iOS 6, the all day events showed up in the notification centre but it lacks in the upgrade iOS 7.Same problem here. Some people pointed out that all-day events do show up in their notification center, but that seems only to be the case for birthdays (and only as text like the weather). I've tried it myself on my iPhone and iPad and it did work for birthdays but not for any other all-day events. I already sent this to Apple as a product feedback as well, as should everyone of you. The more people mention it, the faster Apple's going to fix this issue. In its current state, notification center is not a very helpful feature in my opinion. There's absolutely no point in not showing all-day events in the 'today' calendar overview.
Here's a link to the product feedback page: http://www.apple.com/feedback/
I posted my message in the iPhone section since I couldn't find a page specifically dedicated to iOS 7.
I really love the look & feel of iOS 7 but it's kinda sad to see notification center not tapping its full potential.
Cheers! -
Anybody facing issues on vodafone in bangalore for iphone 5s. horrible voice breaking occurs.
anybody facing issues on vodafone in bangalore for iphone 5s. horrible voice breaking occurs. Really frustrting as voice calls break and automaticcaly gets disconnected.
My current phone is not working. The iOS 8 update has made my phone go from a joy to have to something I want to throw away. I would like to uninstall my update and go back to loving my Iphone again. Can you please help? I've sent numerous messages with no response. I'm trying to stay loyal to Apple however if your only suggestion is to purchase another phone it might not be an Apple product anymore. I'm offering an opportunity to save a client who has multiple Apple products.
-
App Store on the iPad (iOS 6), can you view the Top Charts for iPhone?
In the App Store on the iPad (iOS 6) can you view the Top Charts for iPhone? It used to be possible in a previous version of iOS.
disregard post.
-
Jabber voice for iPhone 9.1.7 crashes on iPhone 5S
Few users reported that Jabber voice for iPhone crashes on 5S after updating to latest 9.1.7 version. App loads, register to CUCM but crashes when using dial pad and application closes itself. App works on iPhone 4.
Does anyone else have the same issue?The following error is reported via Console:
iPhone ReportCrash[4722] <Notice>: Saved crashreport to /var/mobile/Library/Logs/CrashReporter/Jabber Voice_2014-05-19-083318_"removedname".plist using uid: 0 gid: 0, synthetic_euid: 501 egid: 0
May 19 08:33:19 iPhone Jabber Voice[4724] <Warning>: Stderr redirected to: /var/mobile/Applications/0CDDD8A3-0BD0-40DA-AFCA-8B32C71B0187/Documents/Logs/Jabber Voice-2014-05-19-08331907-Console.log
May 19 08:33:19 iPhone Jabber Voice[4724] <Notice>: (Error) [ABLog]: ABPeoplePickerNavigationController does not support subclassing in iOS 7.0 and later. In the future, a nil instance will be returned.
Issue happens on iPhone 5S running 7.0.6 or 7.1.1 iOS. -
Exchange iphone 4 for iphone 4S
can I return or exchange iphone 4 16 gb bought at at&t store online for iphone 4s 16 gb at the apple store. But i m still in the contract. I still have a year left of my contract.
With a year left in your contract, that would imply that your phone is already a year old. Within the first 30 days of purchase, you can reurn a phone under the "buyers remorse" clause, but after that, your best option is to try to sell your old phone to buy a new one.
With one year left on your contract, you would also not qualify for the "new discount" pricing, so you either pay the full price, or pay the "new discount" plus $250 and get a new 2 year contract. This would mean that the 16GB iPhone 4S wouldn't cost you $199, but in fact $449 and you would have a new 2 year contract starting the day of your new purchase. -
IPhone 4 exchange /return for iphone 4s
can I return or exchange iphone 4 8 gb bought at verizon store for iphone 4s 16 gb at the apple store and pay the diference the phone is only 1 day old. verizon has a 35.00 restock fee does anyone know if this can be done?
Yes, within 14 days (or 30 in ca) any fee would be via Verizon.
Maybe you are looking for
-
How do I add iTunes gift card to just one family member?
I have 4 children under 13 and they're on the Family Sharing Plan, but when one gets an iTunes gift card, I want to add it to just his or her account so the siblings don't use it. How do I do that?
-
HT4314 mac 10.8.2 and safari 6.0.2 and pogo suddenly won't load?
I was having trouble playing pogo minigolf, so I updated to Mac 10.8.2. I installed new java, etc. I played for about a month or two and all has been good. Now all of a sudden, pogo games won't load. It says I need Java...but that's not it. Any sugge
-
Not able to start OHS Apache Server in WLS EM console....
Hi all, WLS 10.3.5 with Web Tier 11g ( 11.1.1.5) installed. I installed it with OHS and Web Cache and associated with domain. Now I go to FMW control and try to start the OHS and it tells me: Could not get secure socket for host and port 6701. The re
-
How to decrease performane of a web dynpro abap application
Hi Folks, I am new to web dynpro abap .pls tell me how to decrease performane of a web dynpro abap application but dont say by using icm tracking and wd_trace_tool.that are used to find out errors?
-
What is this symbol in labview
hai every one i have a doubt what is name for file what i attcahed and what is its uses in labview Attachments: what is.jpg 4 KB