POSIX Reports problem with SSB

I changed the HDD in my Mid 2009 MBP since the old one is not working anymore. I safely replaced it with samsung SSD 840 pro 128 gb. I tried to install the mac os x 10.6 snowleopard but when I was about to choose a drive, the SSD was nto appearing so I wento disk utility to make a partition but i got this message and it failed:
Partition failed with the error: POSIX report: The operation couldn't be completed. Cannot allocate memory.
I took it to apple today and they said they cannot do anything and I will have to contact samsung for this or try to format it in another computer. I asked if it could be the SATA cable and the guy from apple said no coz it was visible in the disk utility as 128 ssd.
How am I supposed to do this coz I haven't got another laptop that I can use :s
I hope anyone can help me

It really doesn't matter much. Most are aluminum. The link I posted looks like a good one. Do you want to order or do it today? Best Buy has one, but it's substantially more than the other link I sent you and it's basically the same thing.
http://www.bestbuy.com/site/2-5-serial-ata-hard-drive-enclosure/5190553.p?id=121 8623897772&skuId=5190553&st=2.5%20enclosure&cp=1&lp=1

Similar Messages

  • Reporting problems with iTunes

    Does anyone know how to report problems with updates to iTunes to Apple? I cannot find any way to contact them to alert them to bugs and problems.

    And if you're an ADC member (the Online membership is free), you can use Apple's Bug Reporter.

  • HT4718 are there any reported problems with safari with the new OS X Mavericks?

    My early 2008 iMac running OS X 10.9.2 all of the sudden has problems loading pages in safari.  The problem timing is the same as the upgrade to Maverick. The computer is connecting to wifi and other devices such as iPhones and three PCs have no problems.  The ISP is Xfinity.  Are there any reported problems with Maverick and Safari?

    Try searching.

  • Chrome (Windows NT 6.1 6.2) users reporting problems with loading and mouseevents - any insights?

    For several years now, I have created simple studies (I do psychological stuff) to run online, recruiting participants through Amazon Mechanical Turk (AMT). I have had no problems until recently (last 6 to 9 months). Now, some AMT users are reporting problems with stimuli loading or buttons not responding immediately when clicked (e.g., advancing to a new screen). What is common amongst all the users experiencing problems is that they use Chrome, and they also tend to be Windows NT 6.1 or 6.2 users running Flash Player 12.0. But not a single Firefox, Safari, or MSE user has ever reported an issue. I'm just looking for help in troubleshooting this problem. Again, the studies I run are incredibly simple (e.g., no videos being loaded from server, etc.), mostly word presentation where I record time and x,y coordinates of mouse movements as they respond to questions. Would attempting to publish for another target version of Flash Player help? The default setting is to publish the .swf and .html wrapper for Flash Player version 11.7. Any ideas? I also use version 13.0.1 of Flash Professional CC to create my studies if it helps. 

    This is helpful. Thanks. So it would be to my advantage to play around with something like SWFObject 2?
    http://www.adobe.com/mena_fr/devnet/flashplayer/articles/swfobject.html
    Or is there something else you would recommend?
    What I've been doing is a far cry from actual web development, but quite interested in learning more. This swfobject seems to get at what you are suggesting (I think). 

  • Cannot "Report problem" with recent purchase.

    I am using Windows 7 Pro w/ Internet Explorer 11 and iTunes v11.1.3.8.  Both these are latest versions as far as I know.  Despite this, when I go to report a problem with a recent download, IE shows a message I must be using the latest versions of these two applications in order report the problem. 
    What to do about this?

    If it is an issue with a song not playing correctly, you may be able to re-download it with iTunes in the cloud beta. Log in to your account, click on "Purchased" in the Quicklinks section, and re-download the song.

  • XL Reporter problem with SQL 2005

    Hi,
    We just migrated our SQL Server from 2000 to 2005. Everything seemed OK, until we tried to run XL Reporter addon. Our SQL 2005 is 64bit edition, and I heard the 64bit version has some problem with transferring data to Excel, for example.
    has anybody had the some problem? How can we solve this?
    Thanks.
    Andre

    Hi Andre,
    Check this thread: Re: XLR - Terminal Server
    It should be a problem if your PL is upgrade to new.
    Thanks,
    Gordon

  • Reporting Problems with Overground Cables on Poles

    A number of houses where I live have their phone lines carried on poles.  The cables pass close to and through branches of trees and several of the cables are likely to be damaged very soon as some are being dragged down by the weight of the branches. 
    Is there a way of reporting this to BT such that they can possibly take proactive steps to avoid the problem rather than waiting for the lines to break as they have done previously?
    The fault reporting problem goes via a line check which won't fail.
    Thanks.

    Here is the link you need
    http://www.openreach.co.uk/orpg/home/contactus/tellussomething/tellussomethingaboutournetwork/tellab...
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Reporting problems with App Purchases

    This method doesnt work:
    http://support.apple.com/kb/HT1933
    It is a bug in tTunes? Or have they changed the way to report problems?
    Why are they still listing it on their site as the way to report problems? It just doesnt work....
    25 billion downloads is obviously to much for them to handle.

    FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
    For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
    Phone: 800-275-2273 How to reach a live person: Press 0 four times
    Hours of Operation: Mon-Fri: 9am-5pm ET
    Email: [email protected]
     Cheers, Tom

  • Report Problems with nvl...

    Hi,
    I have a problem with a report in my application.
    On the page, there are two items, a submit button and a report.
    I intend to use this to search the report for the two attributs, which are in the items.
    The report should show the result, even if no item or only one item is filled...
    For this my idea is to use nvl expressions in the where clause like this:
    WHERE attribut1 = NVL(:P1_ITEM_ATTRIBUT1, attribut1)
    AND attribut2 = NVL(:P1_ITEM_ATTRIBUT2, attribut2)
    But the problem is, that when only the second item(attribut2) is filled, all data of the table appears, because the first item(attribut1) is empty....
    Does anybody have an idea, how to solve that?
    I hope you understand my problem!
    Thank you,
    Tim

    Tim,
    Maybe something like this would work for you:
    WHERE (attribut1 = :P1_ITEM_ATTRIBUT1 or :P1_ITEM_ATTRIBUT1 is Null)
      AND (attribut2 = :P1_ITEM_ATTRIBUT2 or :P1_ITEM_ATTRIBUT2 is Null)Doug

  • How to use bugzilla to report problems with OVM

    Hello,
    I want to use bugzilla.oracle.com to post some problems with OVM 3.1.1. After registration process (follow the link received in the confirmed email)
    I try to login, but it seems that it is not possible to login. Normally the login name should be displayed at the top of the window (I know it from bugzilla.redhat.com), but at Oracle I arrived again at https://bugzilla.oracle.com/bugzilla/index.cgi after login.
    So in general it seems that it is not possbile to use bugzilla.oracle.com. All searches I tried display no results.
    Has anyone some experience in this issue?
    Edited by: pdbrmont on Aug 26, 2012 2:10 PM
    Edited by: pdbrmont on Aug 26, 2012 2:12 PM

    SRW.RUN_REPORT('report=ports paraform=no'|| :port));
    in above syntax what is the error
    please reply
    You have two closing parenthesis that's why.-------------------------------------------------------------------------------
    Where to put the code:
    normally... You will put the code in before report trigger.
    to define the parameter...
    srw.run_report('parameter1=param_value');
    insert ----> parameter1=param_value <-- somewhere in the comand line, there should be no problem with that.

  • Interactive Report - problem with export by email

    Hi,
    We're upgrading to Apex 4.0 and we encountered a problem with the email export in html format for the Interactive Reports. The french accents are displayed with some weird symbols in the HTML file.
    When I export directly in html from my report instead of the email, the accents are fine. So the problem must be the encoding of the email which is set to UTF-8. Our database use WE8MSWIN1252 encoding for the NLS Characterset.
    Without changing our NLS Characterset, is there something I can do to correct this ?
    Thanks

    Hi Denes,
    The administrator have created a mapping table,and they send me this two lines in JMT.conf file:
    /htmldb-test /i/fck/*
    /htmldb-test /pls/*
    The error still exists,i would like to know if these two lines generate a kind of confusion in any treatment of filtre in interactive report.
    Aymen

  • Why does my latest version of Firefox under Windows 8.1 always report problems with security certifactes - even on mozilla,com - when my latets version on Ubunt

    On my desktop, I have been using Firefox V27 on Ubuntu 12.04 for some time. It uses secure sites - such as https://mozilla.org - and accepts the Security Certificates quite happily, so I am not even aware there is any issue.
    My new laptop is Windows 8,1, and I have installed Firefox- the latest version.
    Whenever Firefox visits a secure site, it ALWAYS says that there is a problem with the security certificate - even at mozilla.org - and warns me away. I have to complete a security exemption.
    Why is this, and how can I fix it?
    Thanks in anticipation.

    unfortunately the fiddler2 issuer in certificates might be a sign of unwanted software present on your pc that is intercepting secure network traffic. please go into the system control panel and uninstall programs like BrowserSafeguard, BrowserSafe, SafeGuard or other software that sounds suspicious and didn't get installed by you intentionally.
    <br><sub>reference: https://support.mozilla.org/en-US/questions/982532#answer-520145</sub>
    afterwards, run a full scan of your system with different security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] & [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner].
    [[Troubleshoot Firefox issues caused by malware]]

  • How can I report problems with the Mozilla support website?

    Of course this is a problem with the website, not with Firefox, but "other products" is a dead end. I have sensory disabilities, so these are some of the bugs I've noticed, I don't know what bugs other people have noticed:
    1. There are too many animations. They hurt.
    2. Searching for "accessibility" turns up questions and answers using the word "access," which usually have jack to do with accessibility problems, accessibility solutions, accessibility tools for Firefox, etc. for disabled users.

    '''[https://addons.mozilla.org/en-US/firefox/addon/flashblock/ Flash block]''' {web link}
    Never be annoyed by a Flash animation again! Blocks Flash so it
    won't get in your way, but if you want to see it, just click on it
    This is probably a good site to be aware of
    http://www.accessfirefox.org/Firefox_Accessibility_Extensions.php
    It is a semi official mozilla community run site.
    IIRC the site and many of its addons were caught out by Australis.
    That is probably one site we should reach out to in advance if for instance making anything less distinct smaller, or lower contrast.

  • Disk Copy 6.3.3 reports problem with image - but not always

    I have run across a problem with Disk Copy 6.3.3 that looks to me like a bug of some sort, but I can't be sure and want to see if anyone has any additional information. I am running Mac OS 8.1 on a Quadra 950, just in case it is important.
    I have saved almost all my old installation floppies as Disk Copy images and now use these images if I have to reinstall software due to failures of several original media. I recently had reason to reinstall software that was stored on multiple disk images and I could never mount them all without receiving the following error after some of the disks were mounted:
    +There is a problem with the disk {whatever the disk name is}.+
    +Some information may have been lost.+
    +Check any recently-used files for data loss, and use a+
    +disk-repair program on the disk.+
    After further investigation, I found that this problem not only affected this set of installation disks, but others as well. To make a long story short, I have found that I have at least two Disk Copy images that are causing this behavior. I have dozens of other images and they all mount successfully UNTIL I mount one of these two image files (there may be others, but I know of at least two at this time). After I mount either of these two images, many (I estimate more than 50%) of the other images seem to mount, but the message above appears after the mount completes. Some of the images seem to mount without errors, even after one of the two problem images are mounted. Unmounting the problem image does remedy the problem. The only way to mount images without errors again is to reboot.
    Has anyone seen this before and have any additional information? In particular I would like to know if I can trust the images that are giving me problems - in particular the two that are causing this situation, but also the ones that indicate data corruption? I'd also like to know if there is a real fix for this problem? If the data in these images is not corrupt, I could make floppies from them every time I want to reinstall software, but I'm not sure the data is good and I really don't want to have to try to find floppies just for an occasional reinstall. Thanks for any help!

    Well, I've got some additional information. I have a Macintosh LC running 7.5.5 that also has Disk Copy 6.3.3. I didn't copy the image files to the LC, but instead mounted them over the network, in a half-hearted attempt to rule out issues with disk I/O errors causing this problem. All images mounted without any errors. This pretty much eliminates any problems with the disk image itself being corrupt or with it being a problem with the content of the disk image causing a problem with Disk Copy 6.3.3.
    I had been having some signs that my current system disk on the Quadra may be ready to fail, so I added another disk, formatted it, and installed a fresh install of 8.1 on it. Before doing much of anything to customize the installation (no software other than on the 8.1 install disk, almost no settings other than the default, etc...), I tested the images again and they failed again. This eliminates any problems with third party software that I had installed previously. I even booted with extensions disabled and still got the error message.
    When I look in the Disk Copy log file, there are NO signs that any errors have ever occurred. This leads me to beleive that the message I'm seeing is not the fault of Disk Copy, but either the System or the Finder. My best guess right now is that once the image file is mounted by Disk Copy, that it is asking the System/Finder to do something that is either failing and produces the error message, or is returning an unexpected return code and causing Disk Copy to produce this message (which for some reason isn't being logged). If nobody has any clues from the additional information, I'll try reinstalling again with only a minimal install and see if I can figure something out. Thanks for any help that anyone might have!

  • Multicolumn report: problem with continuous section breaks

    Hi All,
    There is a need to create RTF template which consists of 3 logical parts:
    (1) Static text -> some kind of header information;
    (2) Multicolumn (2 columns) text -> contract terms;
    (3) Static text -> information about signers;
    Here is a small screenshot as an example:
    Click for full size
    The problem is that MS Word will place continuous section breaks before and after multicolumn part. And BI Publisher will transform these section breaks into page breaks. As a result each of 3 parts will be on its own page.
    Does anyone have a solution or workaround to avoid such behavior?
    Or can advice anything?
    Thanks in advance.
    P.S. Partly solution is to put the 1st part into page header. In this case MS Word won’t place continuous section break before multicolumn part. But still there is a problem with the 3rd part as it will go to separate page :(

    Thanks for suggestion.
    I've already tried such approach and unfortunately it didn't work.
    If there is only "2 column" text in main template with the subtemplate calls before and after text, then text from subtemplates is appended to 2 column text and also formated as "2 column" text.
    Here is an example files: URL was removed
    XML file is empty as at this moment it is not important.
    Purpose is to get all 3 sections without page breaks.
    Section 2 can be 2-3 pages big.
    Edited by: user534692 on Aug 12, 2009 8:04 AM

Maybe you are looking for