Possibilities using OD + LDAP in Windows Machines
Hi guys,
I have two situations here.
1-) What's the features using OD + LDAP in a Network hibrid (Mac + PC);
2-) What can I do and manage a Windows Machine included in OD + LDAP? Policies?
Thanks a lot
Bruno
I do not believe that is possible. Not the answer your wanted, I'm sure.
Similar Messages
-
Hi, How do I export HDR photos made on a macpro with photoshop cs5 onto a flashdrive so they can be imported correctly into a windows machine that doesn't have photoshop installed on it? Already exported to a HP flashdrive but they do not even show up on a windows machine. Need that capabillity since this is for commercial printing. My wife's mac laptop only shows 3/4 of the picture the rest is grayed out. Adobe support claims it is a Apple problem. Love the finger pointing and hold me blameless atitude on their part. Told them creating a picture should be like gas that can be used in anybody's car, just not their Adobe equipped ferrari. Do I need to convert the file struture so it can be read by the window machine? How would I do that ? Any comments appreciated. Doug
I certainly wouldn't expect to read native PS CS5 files with all features intact and supported on a machine that doesn't have CS5 installed. Try saving the files as flattened (no layers) TIFFs before moving them to the flash drive and trying to open them on the Windoze box.
-
Problems running regressions and applications from a windows machine
I have successfully synthesized an opensparc design on a virtex-5 using xps on a windows machine. however, I cannot run the regressions and I cannot build applications. I have been following the steps provided in the DV guide. The error I keep getting is sims command not found in the xps terminal. Are there any config files or scripts I have to set up and/or run?
Your help is appreciated. Thank you all.You have to install the simulation tool to your window machine. I think it could be very hard to make it work as you have to write new scripts to sim the design.
-
Hi All,
I recently purchased 13" Macbook Air with OS 10.10.2. I want to use my 1TB Seagate backup plus external hard drive as time machine and my windows 7 pc. Please suggest a method. Thanks in advance for your reply.I strongly recommend having an external drive dedicated solely for TimeMachine. You could partition the drive but if something goes wrong you risk losing the data on both partitions. Should you decide to go ahead with splitting the drive for two different uses you’ll need to partition the drive either using the Mac’s built in Disk Utility program or Windows utility. I believe the built in Windows disk utility program will destroy the current partition and erase the data that’s on it - I use a third party Windows disk utility program for partitioning and it allows for non-destructive partitioning but warns to back up data first just in case. Apple’s Disk Utility can do non-destructive partitions but I don’t recall every trying to do a non-destructive partition on a disk originally formatted for Windows using it. Again - back up that data just in case.
Finally, your TimeMachine drive should be at least 1.5 times (I prefer 2 times) the size of the data you expect to be backing up a year or two from now. In other words, if you currently are using 50GB of your computer’s drive but expect to begin purchasing Mac software to replace software on your Windows computer and if you expect to be putting photos, music, and other data on it you might expect that two years from now you’ll have 100GB of stuff on the drive. So a 200GB partition is the smallest size you’d want. TM’s backup scheme keeps multiple copies of data as it changes so the extra room is important for this scheme. -
How do I use an external hard drive that has been used on a windows machine on my mac....
I have recently just bought a new mac and want to edit files that are currently saved on my external hard drive that I used on my windows machine.
Is there any way to be able to do this or will I have to transfer all files across to my mac and then re-format the external?
Thanks in advance.Either copy files over, reformat drive from NTFS to a Mac format and copy files back, or tell your Mac how to write to NTFS drives with a third-party product. Tuxera NTFS has high ratings: http://www.tuxera.com/products/tuxera-ntfs-for-mac/
-
am trying to import Firefox bookmarks from a Windows machine into Firefox on an Apple. I do not want to use Safari. How do I do this?
I have, on my HP laptop, running XP Pro, using Firefox 4.0, went under bookmarks to show all bookmarks. A window opens up that says library. I then go to import and back up, and I choose export HTML. I then move this file over to my new Mac Pro. On my Mac Pro I also have Firefox 4.0. I go up under bookmarks, show all bookmarks, import HTML. It lets me browse and I find the file on the desktop, I select it then nothing happens. I am not interested in using Safari. I would like to continue using Firefox. However, as an experiment, I followed the same process except on my Apple computer I opened up Safari and tried to import in the Firefox bookmarks. It came up with an error saying the file could not be accessed. I then thought perhaps the file got corrupted, so I went back to my Windows Firefox and re-exported the bookmarks again. Same problem. So, am I creating the bookmarks incorrectly on my Windows machine?
Thanks,
KentProbably your Mac cannot understand the Windows html format, please try the following to see if it helps:
In your PC, export the bookmarks in html as you did in your post. After you have saved it, change the name of the file to “bookmarks.html” and save it again.
In your Mac, import the saved file as you posted. -
Hi! I'm a Windows XP convert... switched to an imac about 4 months ago and am LOVIN' it As a graphics designer I did use a feature on my Windows machine which I really miss on my mac... beaing able to see a preview of one of the images in a folder on top of the folder icon. In other words, in Windows, you can see the first image that is inside the folder as an icon on the folder itself. Is there a way to do this on the mac? Maybe some software program that will do it? Thanks for you help!
It would be brilliant if Apple could make picture folders behave like events in iPhoto. You could see a photo on the folder, and also mouse over it to change pictures.
But no, there's not an application I'm aware of that does this. You can manually make a picture the folder icon, but it's a tedious process.
Unfortunately this is another example of how dated and worn out the Mac's interface is. The concept of using a file folder as the icon for a directory of images is so 80's. You could use coverflow, but that only helps once you're in the directory itself. Or use iPhoto or Aperture, although they just do photos. Or try Lyn as an alternative: it has a sort of iTunes-like interface, and makes it easy to organize photos without having to put them in iPhoto. And it can display photos that are already in Libraries.
But you'd probably need a Finder alternative. I use Leap, which displays any type of document. It also does tagging, which is another huge omission in the Finder. More like Windows Explorer (although still no photo on folder icons).
Another very stylish Finder alternative, especially useful for pictures, is FileBrowse. I don't know why it hasn't gotten more attention. It DOES put photo previews on the folders it shows. And allows one-click expansion to show the photo enlarged. It's super fast, and even allow you to group/sort by camera or flash! It really has to be seen to be appreciated. It works in Lion, although it doesn't seem to be have been updated lately. http://www.filebrowse.com/index.html
Rob -
I have Lightroom 6 (not CC) on a Windows machine. I'm prompted to log into Creative Cloud when I restart my computer (I don't have, use, or pay for Creative Cloud), and then when I launch Lightroom, it tells me to use the application I have to log into my Adobe account...AGAIN! And then to further add insult to injury, I'm prompted to enter in the license number of my product. I've gone through this process a dozen times now...SCREAM!!!
Paulou12 what type of a Creative Cloud Membership do you have? You can find details on how to update Lightroom using the Creative Cloud Desktop application at Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.
Finally if you are in a managed environment then please work with your I.T. department to apply the update. -
I have a Lexmark Prevail Pro 705. Latest (as of july 30, 2012) firmware. Mac driver v 11.0
I can no longer communicate wirelessly with the scan feature of the printer. I can print no problem using a wireless connection. Using a window's machine I can scan wirelessly from the printer. It seems that my iMac (OSX 10.8, 3.06 Ghz Intel Core 2 Duo, 24inch early 2009) is not connecting to it. I can put a USB cord into the computer and scan.
Any ideas? This came up starting 2 weeks ago. I had hoped the operating system upgrade would solve it. It has not. I see nothing on the Lexmark boards about this. Since the printer works fine in both print an scan mode using a windows machine and can print fine from a Mac but not scan I don't have any ideas but I suspect it is the Mac.Repair your disk permission: http://bit.ly/OeD7U3.
Run Cleanup tool http://bit.ly/vnukXY
Download updated driver from Lexmark website www.lexmark.com
Run firmware update http://bit.ly/AcNqbg
Reset printing system http://support.apple.com/kb/HT1341 -
Using one copy of Windows to install via boot camp and on a virtual machine?
I have a copy on windows 7 coming in the post and I was wondering if it is possible to install windows 7 via boot camp when I want to do something more memory intensive such as gaming and also install it on a virtual machine such as virtual box just for other regular stuff. Also would this be possible using one copy of windows and one licence key?
Then you need Parallels or Fusion to link to a native Windows partition.
Comparison of VMware Fusion Parallels VirtualBox -
I have noticed that when using Tigers disk utility to format an external USB flash drive I only have the choice of FAT ( when formatting for use on a Windows machine ) and not FAT32. I have found that USB FLASH drives formatted as FAT do not always work on Windows machines. Why? How can I use Tiger to format for FAT32?
I think it depends on the size of the Flash Drive as to whether it uses FAT16 or FAT32.
Can you format it FAT32 on the PC?
Other options would be NTFS or Mac OS Extended...
NTFS-3G Stable Read/Write Driver...
http://www.ntfs-3g.org/
MacFUSE: Full Read-Write NTFS for Mac OS X, Among Others...
http://www.osnews.com/story/16930
MacDrive for the PCs... allows them to Read/Write HFS+...
http://www.mediafour.com/products/macdrive/ -
10g forms developed using windows machine is not working in Solaris machine
I have developed a form using the following version of Oracle Developer suit 10g Fomrs using WINDOWS machine.
My Application server is in a SOLARIS machine. All the .fmx are copied in the same SOLARIS machine in a directory.
I have copied the form (.fmx) in the same directories where the other forms are, in the SOLARIS machine.
Now i click on the menu item (menu item was already present there before developing the form in the menu. I did not have to create a new menu item in the Menu) in the windows machine.
The form doesnt appear.
Could you please tell me wheather i have to compile the form that i have developed in WINDOWS machine in some format of SOLARIS machine, or I have to do something else so that on the click of Menu item in Windows machine that form appears. Or Ihave to develop the form using SOLARIS machine?
Please help me.
I am working on the following version of Oracle Developer suit 10g Fomrs
orms [32 Bit] Version 10.1.2.0.2 (Production)
Oracle Toolkit Version 10.1.2.0.2 (Production)
PL/SQL Version 10.1.0.4.2 (Production)
Oracle Procedure Builder V10.1.2.0.2 - Production
PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
Oracle Query Builder 10.1.2.0.2 - Production
Oracle Virtual Graphics System Version 10.1.2.0.2 (Production)
Oracle Tools GUI Utilities Version 10.1.2.0.2 (Production)
Oracle Multimedia Version 10.1.2.0.2 (Production)
Oracle Tools Integration Version 10.1.2.0.2 (Production)
Oracle Tools Common Area Version 10.1.2.0.2
Oracle CORE 10.1.0.4.0 Productionhi
still its not working
Please I need help
bash-2.05$
bash-2.05$ /u02/oradata/data/PROJ/APPS/bin/frmcmp userid=xxx/xxx@xxx batch=yes module=AB.fmb module_type=form compile_all=yes window_state=minimize
FRM-91500: Unable to start/complete the build.
bash-2.05$
I have set the following environment variables.
LD_LIBRARY_PATH=/u02/oradata/data/PROJ/APPS/lib32:/u02/oradata/data/PROJ/APPS/jdk/jre/lib/sparc:/u02/oradata/data/PROJ/APPS/jdk/jre/lib/sparc/native_threads:/tmp/OraInstall2008-07-11_03-00-49PM/jre/1.4.2/lib/sparc/client:/tmp/OraInstall2008-07-11_03-00-49PM/jre/1.4.2/lib/sparc:/tmp/OraInstall2008-07-11_03-00-49PM/jre/1.4.2/../lib/sparc:/usr/lib:/usr/ccs/lib:/u01/oracle/product/10.2.0/lib:/usr/lib
ORA_NLS10=/u01/oracle/product/10.2.0/nls/data
JAVA_HOME=/u02/oradata/data/PROJ/APPS/jdk
ORACLE_HOME=/u02/oradata/data/PROJ/APPS
ORACLE_TERM=vt100
FORMS_PATH=/u02/oradata/data/PROJ/APPS/forms
TERM=vt100
PATH=/usr/bin:/usr/ccs/bin:/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/boapp/oracle/product/9.2.0/bin:/usr/lib
NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1
TNS_ADMIN=/u02/oradata/data/PROJ/APPS/network/admin
OSTYPE=solaris5.9
regards -
Hi, I used an external hard drive as a time machine,now I want to use it on a windows PC as a normal hard drive again. How do I "reformat" the time machine to an normal usb-device?
http://lmgtfy.com/?q=how+to+format+hard+drive
-
Can i use my TC as a NAS for both my mac and windows machines at home ??
im moving to my new place real soon and will have to set up my very own network.
have set up the network before at my parents with no problems, as we were all using windows machines.
with my new MBA, i am looking at 2 options:
1) get an indepedant wireless router (eg. Linksys, belkin etc) and get another third party NAS (eg. Western Digital, Ioemega, etc)
or
2) get a 2TB time capsule and have my problem solved.
For (2), my only concern is if I can access the TC from my windows macine? For sure I know my MBA can access the TC, as a network point and as a NAS, but can my windows machine access the TC's NAS feature and wirelessly import and export data?
appreciate your feedback and advise.
thanks!
EdwinYou don't need to re-format the drive. Just be sure to use the same network name on PCs and the TC. On Mac its detected automatically.
*Sorry, my screen capture is in spanish but I think it can help you. -
I have an email account causes the machine to hang up after being in use for a day. It only occurs on my Macbook Pro and only one particular account. The problem account works fine on my iMac and Windows Machines. I have been to the local Genius bar and through trial and error we have determined that Mail is working ok but somehow the account is causing the problem. I have used this account for years. Any ideas what is causing this?
No idea why, but one thing you may try if you have the time, is create a new user, and set up the problem mail account in the new user space. See if it causes your MBP to hang as well. That will tell you if it is something wrong with your main User, or something wrong with MBP.
Assuming this works, I'd nuke the problem account in your main user space, re-start, and reinititate the account and see if that helps.
Depening on how many email accounts you have setup, it may be necessary to nuke the whole Mail folder in your User/Library.... Hard way to get it to work, but just my idea.
Maybe you are looking for
-
Programatically delete a DAQ device
I have created a system with hardware (a USB DAQ) and software that is to be installed on multiple computers overseas. I want to make the set-up as easy as possible because I don't think the people doing the setup will be very well trained, and I won
-
BT activation date confirmed and changed 4 times! ...
Back in November last year I had placed an order to move my services (phone and BT infinity 2 at the time) to my new home (new build) and asked for an activation date of 22 December. At the time I paid for line rental for onw year in advance, which I
-
Dynamic selection-screen parameters
Hi All, Is it possible to create a dynamic selection-screen checkbox parameters at runtime. My requirement is : I have Object parameter on the selection-screen, based on this it has to fetch the info structures and display it with checkboxes on the s
-
Copying Cells with references from Numbers to Pages
I'm trying to copy a row of cells to paste into a Pages doc. The row of cells are referenced to other cells in the Numbers sheet that are not being copied to the Pages doc. Once copied to the pages doc I get errors for the referenced cells. Is there
-
I'm trying to download the new iOS 7.0.6 but all I get is "est time remaining" message. I want to cancel but don't know how.