Possibility of using Confirable material for consumption

Hello All,
Can any body tell me about the configurable material with class type 300 used as Bom component for different finished material for material consumption.

Hi Rajasekar,
Normally we have the top most material or the material which is to be sold as the one which has a class type 300 assigned to it. I think, if you need to assign this material as a component in another material, then even that material would have to be a configurable material.
All said and done, if you are using this within another material you would still have to use dependencies for picking this material for consumption which would be based on the class char values that you get for this material when the production order for the parent material is created. You will need to pass values to these characteristics for this to happen and this normally happens through a sales order in such cases.
If you could let us know of a business case or give us an example then maybe we could give some suggestions.
Regards,
Rajesh

Similar Messages

Is it possible to use iCloud storage for videos

Is it possible to use iCloud storage for videos. I ran out of 16 gig storage on my iPad.

You can try cloud storage like Sugarsync, Dropbox or Box.com
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%203/b8e055e5cd15e01d23d aa6d55f1bea4b.jpg

The Wifi storage options are interesting but it seems they only allow to read files from the device on the iPad but not transfer files to the storage device via WiFi. I'm looking for a possibility to use the iPad for photography while traveling, without

the Wifi storage options are interesting but it seems they only allow to read files from the device on the iPad but not transfer files to the storage device via WiFi.
I'm looking for a possibility to use the iPad for photography while traveling, without the access to a computer.
Shooting photo's in RAW format crates pretty big files that will fill up the iPad's memory pretty fast if you shoot a lot during a (let's say) month long trip.
my idea was to use load the photo's to the iPad so i could view them and sort out any bad ones. then copy them over to the storage device so i can continue using my CF cards for shooting. I have an image thank for copying the photo's directly to the HDD but it would be so sweet to be able to check them on the iPad before hand.
any suggestions?

Check out pogo plug device, it allows you to upload camera roll via wifi.

Hi all - is it really possible to use one license for two computers or is it just a rumor?

I heard that it would be possible that you can use one license for two computers. Is that the truth? And if so - how does it work?
Thanks
K

Adobe CC or any perpetual previous version allows you to install & activate it two times (on the same computer or other different one).
As per End user license agreement, only one computer can be used at one given time.
Please refer to:
Licenses and terms of use | Adobe
Adobe - Adobe product license agreements
Hope it helps you.
Regards
Rajshree

[CS3 JS SDK] Possible to Use HTTP URLs for Links?

I am attempting to use JavaScript to implement a connector from CS3 (InDesign/InCopy in my case) to our content management system. Our CMS provides an HTTP-based API. By using the HttpConnection object (from the Bridge code, see posts on "httpwebaccess library") I can access our repository using HTTP URLs and, for example, get an InDesign document or INX file (and the UI support in CS3 scripting makes it possible for me to build all the UI components I need without having to write a true plugin).
However, what I *can't* seem to do is create Link objects that use a URL, rather than a File, to access resources.
My goal is to be able to store in our repository InDesign documents that use URLs to other resources in the repository for links (e.g., to graphics and InCopy articles).
However, as far as I can tell from the scripting documentation and my own experiments, the URL property on Link is read-only in JavaScript (even though the scripting API HTML indicates it's a read/write property) and Link instances can only be constructed using File objects.
My question: have I missed some trick in the scripting API (or elsewhere) that would allow me to create links that use URLs instead of files (and having done so would InDesign resolve those URLs?)? Our repository does support WebDAV, so that might be an option, but it would depend on mounting WebDAV services in consistent places on client machines, which is dicey at best, given the weak nature of the WebDAV clients on both Windows and OS X).
Or are my only options to either copy linked resources to the client's local file system (or a shared network drive) or implement a plugin that implements my desired behavior for links?
And if the answer is a plugin, will that even work?
This is in the context of CS3. Has the Link mechanism changed at all in CS4 such that I could do what I want in CS4 where I cannot in CS3?
Thanks,
Eliot

Hi,
It is not possible to use HTTP URLS in CS3. You will have to create a plug-in to use Custom Data Links.
I think it is possible to use HTTP URLs in CS4 as per the User Guide.
Regards,
Anderson

How is it possible to use Index Seek for LIKE %search-string% case?

Hello,
I have the following SP:
CREATE PROCEDURE dbo.USP_SAMPLE_PROCEDURE(@Beginning nvarchar(15))
AS
SELECT * FROM HumanResources.Employee
WHERE NationalIDNumber LIKE @Beginning + N'%';
GO
If I run the sp first time with param: N'94', then the following plan is generated and added to the cache:
SQL Server "sniffs" the input value (94) when compiling the query. So for this param using Index Seek for AK_Employee_NationalIDNumber index will be the best option. On the other hand, the query plan should be generic enough to be able to handle
any values specified in the @Beginning param.
If I call the sp with @Beginning =N'%94':
EXEC dbo.USP_SAMPLE_PROCEDURE N'%94'
I see the same execution plan as above. The question is how is it possible to reuse this execution plan in this case? To be more precise, how
Index Seek can be used in case LIKE %search-string% case. I expected that
ONLY Index Scan operation can be used here.
Alexey

The key is that the index seek operator includes both seek (greater than and less than) and a predicate (LIKE). With the leading wildcard, the seek is effectively returning all rows just like a scan and the filter returns only rows matching
the LIKE expression.
Do you want to say that in case of leading wildcard, expressions Expr1007 and Expr1008 (see image below) calculated such a way that
Seek Predicates retrieve all rows from the index. And only
Predicate does the real job by taking only rows matching the Like expression? If this is the case, then it explains how
Index Seek can be used to resolve such queries: LIKE N'%94'.
However, it leads me to another question: Since
Index Seek in
this particular case scans
all the rows, what is the difference between
Index Seek and Index Scan?
According to
MSDN:
The Index Seek operator uses the seeking ability of indexes to retrieve rows from a nonclustered index.
The storage engine uses the index to process
only those rows that satisfy the SEEK:() predicate. It optionally may include a WHERE:() predicate, which the storage engine will evaluate against all rows that satisfy the SEEK:() predicate (it does not use the indexes to do this).
The Index Scan operator retrieves
all rows from the nonclustered index specified in the Argument column. If an optional WHERE:() predicate appears in the Argument column, only those rows that satisfy the predicate are returned.
It seems like Index Scan is a special case of Index Seek,
which means that when we see Index Seek in the execution plan, it does NOT mean that storage engine does NOT scan all rows. Right?
Alexey

Possible? Using External Definitions for data type/message type definitions

Hi all,
i want to use external definitons in my own data type definitions. Is that possible? And if yes, how?
I imported many definitions via a mass import. Now I also want to use these definitions for further interfaces (than the imported ones). The most convenient would be of course to just use them as a custom created type. Can I somehow "convert" an external definition to a data type/message type?
KR
Felix

Hello Felix,
The External defination which you has been imported that cant use in DT and MT but yeah you can use this in Service interface.
you cant modify that External defination if you want to do that then 1st of all modify it and then reimport it as an another external defination.
and creating service interface with this ED you can use it in your message mapping .
i hope this will help to you to clear your doubt.
Monica

Is it possible to use my Zen for an external hard drive?

I want to use my zen for a storage device to my PVR.
Is there a way to activate it so that it acts like a hard dri've or usb hard dri've when connected?
I have the 6gb
Thanks!

brava wrote:
Thanks for your informati've response, but I do not have that CD in my possesion.
If anyone could tell me what buttons to push so it is recognized as a usb storage device when plugged in.
Thanks!!!
Ok I have a 2GB that I use a SD card with. The only place in my menu that I can find the Removable disk feature is under the memory card. Now that may only apply to the 2GB since the memory is so little. If it is a feature then it will be in one of the Main Menus. Just go thru them.Wish I could be of more help to you

Can it be possible to use SUM twice for the same internal table

Hi Guru,
my requirement is follewing.
I need to use a SUM for the same internal twice.
itab.
first : like SUM will sum up all the value
and second like
if wa_tab-field = ' S'
sum.
...some logic
else if wa_tab-field = h
some logic
endif.
can i use SUM in above way.
Many thanks,
Anuj.

Hi,
yes it could be use multiple time.
Here example.
sort GT_COLLECTHI by atnam ATWRT.
loop at GT_COLLECTHI into gs_collecth.
    at end of ATWRT.
      sum.
      append gs_collecth to gt_collecth.
      clear:gs_collecth.
      sum.
    endat.
    at end of ATNAM.
      sum.
      append gs_collecth to gt_collecth.
      clear:gs_collecth.
      sum.
    endat.
endloop.
Thank you
Jan

HT1295 Is it possible to use vst plugins for garageband from an external hard disk? (Without installing to the system hard disk)

Hi,
I got my MacBook pro 17" installed a 250GB of SSD as a system disk.
And i got 4TB of Thunderbolt External Disk.
The thing that i want is: to use my VST plugins for Garageband or Logic without fulling the system disk. Is it possible use them from an external disk?
Thnx

Garageband can't use VST plugins.
If you're talking about AUs: you could try to put an alias into the HD/Library/Audio/Plug-Ins/Components folder instead of the actual files, and see if GB loads them.

Possible to use an expression for a property path?

Hello,
I've run into a problem. I want to use SetNumElements on an array, for which I'd like to vary the first "array" parameter based on an iteration of a loop. I want to increment the size of a different array for every iteration of a "for each" loop. The array which the forEach loop is iterating over contains the names of the arrays contained in Parameters. So I'm trying to use an expression to build the property path within the SetNumElements parameter, but it is complaining. My expression is:
SetNumElements("Parameters." + Locals.CurrentElement, GetNumElements("Parameters." + Locals.CurrentElement) + 1)
I get "expected array, found string" syntax error.
Is it possible to "build" the property name string in this function? I see the "evaluate" function, but that seems it will try to return the contents of the property, which I don't want. I just want to build the array name itself.
Thanks for any input.
David Jenkinson

Hello David,
It looks like you are evaluating a specific element (in this case that element is a string).
Here is a simple example of what I believe your overall objective is:
Parameters.Random is an array of numerics with 10 elements
Locals.String = "Random"
In my statement step I have:
SetNumElements(Evaluate("Parameters."+Locals.String), 1)
So essentially we must use evaluate when building an expression for the entire array, not just one element.
If the expression you want is contained in that array (ie if Parameters.StepTypesToSearchFor[1] = some string of the array ("locals.array") then you will need another Evaluate() function to evaluate that expression.
As an aside, this will only change the size at runtime, the variables (unless they are Station Globals) will return to the defaults when the execution is complete.
With warm regards,
David D.

Is it possible to use mod-osso for htmldb applications

We previously used sso_sdk for registering htmldb(1.4) applications as partner applications to avail single sign-on facility provided in oracle application server.
Can we use mod_osso for registering html db 1.5 applications as partner applications? If so, could you please provide me the links to the documentation on how to achieve this.
Regards,
Lavanya

Lavanya,
No, mod_osso is not quite ready for PL/SQL applications that share a DAD the way HTML DB does. We're working on getting mod_osso enhanced to allow that integration. In the meantime, you can continue to use the SSO SDK and the pre-configured authentication schemes in HTML DB. They will work fine.
Scott

Possible to use FB4.5 for PHP without Zend Studio?

I've watched a really helpful tutorial on FB4.5 for PHP by Mihai Corlan and am hoping to use some of his techniques but would like to use a different PHP server because Zend Server costs money and I'd rather avoid polluting my workstation with still more daemon-type services. I've set up numerous Debian and CentOS servers from scratch and would like to configure FB4.5 for PHP so that I can debug both my Actionscript and PHP. Has anyone done this? I could certainly used advice from someone who's gone through all the trouble already. I'd very much like to capitalize on all of the ways that FB4.5 automatically generates code and creates links for you rather than writing all that stuff by hand.

There may be other ways to do this but I built a flex 3/php web site winter 2008 on a Rackspace based server. PHP is the standard configuration of the cloud server offerings and I have NO maintenance with the server. It just runs. I only program the PHP and client side (Flex for pc and AJAX for Mobile). At the time I looked at Zend (cost money as noted), BlaseDS, AMFPHP and straight dumb text transfers. Zend, BlaseDS, AMFPHP are all AMF and at least for me were a little tricky to get configured correctly and maintain during development (I would usually break something and have to debug which is harder for me in AMF). I quickly decided to just use straight text transfers and create my own protocal with concat and decode on both sides. You use RPC with POST settings. It was easy to put in print statements for debugging whatever I was breaking at the time (client commands, comm channel, server command processing, MySQL interaction) and I could always see exactly what was breaking when related to the comm channel.
So for me, Zend and BlaseDS are hard to set up and maintain during development. AMFPHP was easy to set up and sometimes tricky to debug when things went south. RPC POST text transfers are easy to set up and debug data streams. If you look at the cookbook section of adobe flex and search for any of the above, you will get an ap note or 2 discussing how to set up and a simple usage example.
One last point was after I got done with the pc version of my web site, I started to do a browser based mobile solution for a trimmed down version of the web site. It turns out, since I was implementing in AJAX, I could not figure out how to do AMF type transfers and the text based comm channel easy enabled the client side to change from Flex to AJAX but the server side stayed untouched. It greatly reduced my development. The pc version took about 2.5 man years (70+ main views) and the mobile version took on 3 weeks (15 main views)!
All of the above comments assume you are developing a web site that just uses the server as a data wearhouse. The solution may be different if you are mostly a streaming based web site (streaming off your own server).
Good luck on your choices!

Possible to use powerbook keyboard for my desktop? (temporarily)

So I have a wireless keyboard for my desktop G4.
I need to do some work in single-user mode and I can't do that with the bluetooth keyboard. Is there a way to temporarily make it so I can use the keyboard from my powerbook G4 in its place?
Please let me know!
cheers!
pope

I'm sure it means he owns the Zen Touch.
Phono cables are often not enough for a car stereo as it needs to detect a CD changer, but you can get adapters from a variety of stores that will fool some stereos into thinking there is a changer there. More information and some links here (but try a search in Google as well for your make and/or model of stereo).
Phono cables are also the typical cable uses to connect to a home stereo, but double check your stereo to be sure.Message Edited by SSR on 2-27-2004 02:5 PM

Still possible to use airport extreme for time machine?

I know apple doesn't officially support it but I remember with one of the airport utility updates, it allowed you to use an external HDD with an airport extreme for time machine backups. I tried hooking my external western digital to my airport extreme and it showed up as an airport disk, however I couldn't get time machine to access it. Is there a way I can get this to work?

I followed the instructions found on the link above and had a couple of issues:
1) Instructions state "Make sure 'Share disks over Ethernet WAN port' is checked." Could not find that check box anyplace.
2) Using first disk and then airport passwords as security, the disk does not show up in the Time Machine preferences. Am I to mount the disk first? Does not state that in the instructions.
3) If I mount the disk in the finder (security is a disk password), I am then able to see the drive in Time Machine and the back-up commences. The disk icon appears on my desktop and contains machine.sparcebundle. Another "disk" also appears on my desktop with the name "Time Machine Backups" and which contains the folder Backups.backupdb. I am also able to remotely attach to the machine doing the TM backup from another mac on the network and login.
4) Back-up started and appeared to go well (240G backed up with several partials after that) until I rebooted.
5) After reboot, it was frozen in "Making backup disk available" Opened preferences and it locked up. Had to force a reboot.
6) After restart, manually mounted the extreme external, opened Time Machine prefs, and when selecting back up location saw one with a red "∅" which I could not select and the other the extreme drive with 240G used. Attempted the back-up to the drive and I got "Making backup disk available" on the menu bar and the same message on TM system prefs with a spinning beach ball. Have been able to force quit system prefs and sent to error log to apple, but a forced reboot is still required because the TM icon on the menu continues to spin. Even a "sudu shutdown -r now" in terminal will not reboot the machine. Get to a blue screen with the spinning tick marks and it just sits there.
I wonder if the fact that I could not find "Make sure 'Share disks over Ethernet WAN port' is checked." is the issue. It does not appear to be available in the current version of the extreme base 7.4.2. Could those of you who were able to configure it with a previous version get grandfathered in? I wonder if I need to manually mount the extreme hard disk each time I reboot the machines. I am not sure how to do that but will try and see if it works.
I will be losing internet and e-mail access for a few weeks so will look at this thread again when I return.

Possibility of using Confirable material for consumption

Similar Messages

Maybe you are looking for