Possibility to configure Freedome VPN connection on unsupported devices

I have this idea, which I think would be useful in this world of many different OSes:
I suggest that you would make it possible to, for example, configure the VPN connection on Windows Phone. Windows Phone has the possibility to configure VPN profiles at the settings, and so do many other OSes that are not supported by Freedome. This would also solve the problem of having no VPN on Linux. Of cource it wouldn't be as easy as pressing a big button, but many privacy-aware users would benefit from it.

Hi Jay,
So, when you say you need to connect your website to your Local Network, is your website a Paas instance or a IaaS instance, i.e., website hosted in a VM using IIS?
Do you have a single instance of the website or multiple instances that have been added to a VNET and need to be connected to the On-Premise Network?
What VPN device are you using to connect Azure to On-Prem?
If you have one website instance that needs to connect to an On-prem network Point-to-Site (P2S) connection would make sense. However, if you have multiple instances of your website in a VNET you would need a Site-to-Site (S2S) connection.
Please be advised that only devices that support Dynamic Routing Gateway would work when configuring P2S connections.
Regards,
Malar.

Similar Messages

Configure cisco vpn connection in linux console

Hi all,
how do I configure cisco vpn_client connection in ubuntu/debian/raspbian linux console using .pcf file?
Thanks ahead.

I mean, what packages should I install?
Is it possible to use only "apt-get install" or I should also use "dpkg"?
Is it possible to avoid using any guid interfaces because it is headless pc?
I'm asking because I successfully use openvpn connection in console and I hope that cisco vpn is also possible here.
Thanks for your attention and best regards!

Re: Is is possible to form an adhoc connection between two devices?

Hi,
Yes it is possible to discover devices and establish communication between devices through bluetooth. There are some J2ME devices that supports Bluetooth(JSR 82).
Check the latest devices that supports JSR 82.
http://www.benhui.net/modules.php?name=Midp2Phones
There are few bluetooth applications available in www.benhui.net

Hi ...
You can share from user accounts on your Mac but not Apple ID's and not on iOS based devices such as an iPhone.
iTunes: How to share music between different accounts on a single computer

Possible to configure per connection timeout values?

hi,
please, does anybody know how (or whether or not it is even possible) to configure a "PER CONNECTION" timeout on the connections - created by jndi - to an ldap server?
my understanding is that setting the "com.sun.jndi.ldap.connect.timeout" property on the javax.naming.directory.InitialDirContext sets a _global_ timeout value for _all_ connections created/managed by that InitialDirContext (that is, with a "PER CONTEXT" scope).
however, what i would like to do instead, is somehow configure a different timeout value for each individual connection that a InitialDirContext might know about.
the first solution that will probably pop in your head is "connection pool". however, the app sets "java.naming.ldap.factory.socket" property to a custom socket factory class. according to the following paragraph from the jndi tutorial, that disqualifies the app from using connection pools:
"There are a couple of environment properties that automatically disqualify a Context instance from using a pooled connection. A Context instance cannot use a pooled connection if it has its "java.naming.ldap.factory.socket" property set to a custom socket factory class, or its "java.naming.security.sasl.callback" property set to a custom callback handler class, or its "com.sun.jndi.ldap.trace.ber" property set to enable protocol tracing."
http://java.sun.com/products/jndi/tutorial/ldap/connect/config.html
even if we could use connection pools, we still wouldn't be able to set "per connection" timeout values. would we?
one proposed solution is to completely rip out jndi from the app and replace it with the netscape directory sdk for java. to me, that seems like too drastic a measure though - given the project's time-constraints (the way the app was originally designed does not lend itself to a straight-forward "pop-out/drop-in" type replacement). i was hoping there would be a simpler alternative (a jndi-based configuration type solution, for example).
any suggestions would be gratefully appreciated. thanks in advance for your replies.

Enable the Default Host option in the AirPort Admin Utility, use the IP address you have assigned to your server.

Dual Remote VPN Connection

Hello Guys
i created three different Remote VPN connections with three different networks . i can make them one but for some reasons i don't mix all.
and iam using Cisco asa 5505 with Shrew Soft VPN software , so my problem is
- i connected Shrew soft remote vpn , if i try to connected another remote vpn connection this will not accept the second connection , so please can any one give me a remote vpn connection software that accepts more than one connection

Hi,
Since you mention the ASA and the VPN I presume you are trying to connect by VPN Client to the same ASA?
Why would you want to have several VPN client connections at the same time? (Though I think that isnt even possible)
What are you trying to accomplish by these 3 different VPN Client configurations configured on the same ASA?
Isnt it just possible to configure one VPN Client connection to the ASA that would handle all the traffic of these 3 VPN Client connections?
- Jouni

RV110w firewall VPN connections

Is it possible to firewall incoming VPN connections to a specific IP address or is it "all or nothing" access? I have two internal VLANs and would like to restrict invcoming connections to only one of them.
thanks,
Wayne

There is a special embedded web server in the product that allows firmware upgrade/downgrade when the regular firmware upgrade fails. Configure your computer to use static IP with address such as 192.168.1.100, and point your browser to 192.168.1.1.

How to Configure an Cisco 5505 for PPTP VPN connectivity

I currently have a Cisco ASA 5505(ASA Version 8.2(1), and ASDM gui version 6.2) and a Windows 2008 R2 server with one NIC card. Currently the router is connected to the interent sucessfully using the 'outside' interface(devices connected to the 'inside' interface have access to the internet and are assigned IP addresses via DHCP on the Windows 2008 Server which is also connected to the 'inside' interface) When connected with a client on the inside interface I can establish a VPN connection with the W2008 server, however when I try to connect through the internet I cannot. I have tried researching this on the internet, but have not had much luck. I know it has something to do with pptp port and allowing gre, but I am not familiar enough with configuring Cisco devices or the language they use, to configure this router. I feel as though I am missing something small but very critical. Any help or feedback you can provide regarding this issue is most appreicated, thank you.
*Edit: I have attached a network diagram of what I am trying to accomplish, and I have also attached a dump of the current running-config.

Hi,
Below is the link to the admin guide for the RV042. Chapter 9 covers the configuration of site to site VPN’s and begins on page 123.
http://www.cisco.com/en/US/docs/routers/csbr/rv0xx/administration/guide/rv0xx_AG_78-19576.pdf
If you need further assistance please feel free to contact Cisco Small Business for help in configuring and troubleshooting your VPN.
Thank you,
Jason Nickle

Is it possible to configure the OS X Server VPN Service to use Certificates?

I was attempting to set up the VPN Service on OS X Server 4.0.3 (Yosemite) to use certificates instead of a private shared key. It does not appear that the VPN Server in OS X Server is designed to use anything other than a private shared key (on the server side). I was wondering if I was missing something? The VPN Server works fine using the PSK (L2TP or PPTP) - I just thought I would experiment with certificates - but every example I am finding shows the PSK being used - although some of the "how to" tuturials allude to the fact that VPN certificates are supported for L2TP - but they don't provide any detail on how that functionality would be configured. I tried creating both a VPN Server and VPN Client certificate - however - the certificates show up in the login keychain and do not appear in the certificate window in the Server app. I was hoping that maybe the presence of a VPN Server Certificate would possibly enable an option to use it when configuring the VPN.
~Scott

No unfortunately the 'official' Apple VPN service does not have this ability, furthermore as Apple use a heavily customised version of Racoon you cannot cheat by trying to do this via the command line.
You will have to use a completely different VPN server, Mac and iOS clients can do this but not the Mac server side. I use StrongSwan running in a Linux virtual machine.

Configuring PPP options for only one VPN connection

How do you configure PPP options for only one VPN connection that is using L2TP over IPSec? The built-in VPN client in 10.4.9 is failing authentication because it won't talk MSCHAP-V2 (this is the only authentication protocol I can use) with the server. I am able to establish a connection if I add the following to /etc/ppp/options:
refuse-eap
refuse-pap
refuse-chap
refuse-mschap
require-mschap-v2
However, these options will affect all PPP connections. The preference file that contains the network configurations (/Library/Preferences/SystemConfiguration/preferences.plist) also contains PPP options for each specific network service. After some searching around, I found that there are several keys that seem promising (MSCHAP2, etc.). But these keys take a string value and I have no clue what they should be. These keys are defined in SCSchemaDefinitions.h file.
Any ideas?
Mac OS X (10.4.9)

Hi Brian,
I just tried to check all of ADDT´s "includes" files for any internal references (read: "require" or "require_once" statements) to the file "tNG_config.inc.php". So far I can only see this file referenced in the file "tNG.inc.php" (within the "$KT_tNG_uploadFileList1" array).
So what could this mean ? Maybe you´ll have to make copies of the the original "tNG.inc.php" as well and save them as, say, "tNG.inc_ital.php" file plus make sure that these copies internally point to a different "tNG_config_ital.inc.php" file -- because it´s always the first mentioned file which gets referenced from e.g. an ADDT login page (see the "Load the tNG classes" - part)
I want to use ADDT’s User Registration Wizard and I have looked at all the neat stuff in the Control Panel/Login Settings
The Control Panel will always update the main "tNG_config.inc.php" file, so any further modifications will have to become manually applied to the custom files you´re creating.
Cheers,
Günter

Configure vpn connection

How can I configure the openvpn connection? Thank you.

Hi, see if the basics here are of any help...
http://www.it.northwestern.edu/oncampus/vpn/native/mac.html

Is it possible to get Win 7 to auto start VPN connection?

Hey all,
Is it possible to get Windows 7 to auto start VPN connection? Or can you recommend a 3rd Party VPN client application?
thanks

To make a batch file. exe or cmd, you need to open a notepad. Go to Start-All Programs -Accessories and click on Notepad. In notepad type in
rasphone -d ****** where is ****** a name of your VPN connection
For example: your Vpn connection is called My VPN
The command line will be:
rasphone -d My VPN
Then, save as .cmd or .bat for example. Vpn.cmd
2. Then, Go to Start-All programs -Startup Folder. Click on it with a mouse right button and drag the Vpn.cmd file (file you've made in a notepad). Now, you should see it in startup folder.
3 Right click on your Vpn connection, choose properties. Go to the ,,Option menu,, and Unmark (if marked) -prompt for user name and password, certificate etc. And press Ok.
Restart the laptop. if everything is ok, you will see appearing Command prompt after Windows logging. It connects automatically and disappears.

How can I use VPN connection to access my Outlook email?

My company doesn't support iPhone's so I can't get any help from them -- here is my problem:
We run Outlook 2003 and they won't tell me the server name for Outlook. I have been able to connect to our Cisco VPN and access internal webpages, etc. Is there anyway I can use this VPN connection to retrieve my Outlook email?
Or is there anyway I can identify the server name I need to allow the iphone to connect to my Outlook?
Any help would be much appreciated.

Yes, it is possible to connect via VPN. However,if IT hasn't set up ActiveSync on the internal Exchange server, this won't work anyway.
The server name for your Exchange server is in the configuration of Outlook, so you can find it and use that to connect. But that doesn't mean that things are set up correctly to have this work.
To find your server name, (this is for Outlook 2007), Tools->Options and double-click on the account under the Email tab. The server name is next to "Microsoft Exchange server" on that screen.

ASA 5510 Anyconnect VPN question-"Hairpin" vpn connection on same external interface

I have a Cisco ASA 5510, I want to allow a VPN connection to be established by a client on one of the inside interfaces(10.20.x.x) to be able to go out the single External interface and get authenticated by the ASA to create a VPN tunnel to the other inside interface (10.0.X.X) and access resources on that subnet.
Basically want clients on a WLAN to be able to VPN back in to the LAN with the ASA in the middle to get to company resources,
Is this possible?
Thanks,
Tommy

When we connect any VPN on a device then it is always a TO THE DEVICE connection and I am afraid we can connect only to the local / nearest interface where user is connected in a network with respect to ASA.
I have seen this scenario working though earlier with one of my clients wherein he has configured his DNS server accordingly so that depending upon the source of the DNS request an appropriate IP address was provided for same DNS name. For example if user from IP address range 192.168.0.0 range connects to abc.com then it will get IP address 192.168.1.1 and if a user from range IP address10.0.0.0 connects then it will get 10.1.1.1.
If we configure the same scenario as well then your requirement will be fulfiled with same name however VPN has to be enabled on wireless interface again. If not, then as you have described configuring a new domain name for VPN connection only for wireless users should do the deal.
Regards,
Anuj

VPN connects when on LAN but not via WAN

Hi Guys,
I've recently configured a VPN on my SLS. I uses the following settings:
L2TP over IPsec
PPP Authentication: Directory Services: MS-CHAPv2
Shared Secret: xxxxxxxxx
Client Information:
DNS Servers: 10.0.1.250 (my server) 10.0.1.1 (my airport extreme) - This is where I think I'm going wrong
In my SLS firewall I've open every possible port for both L2TP, PPTP and all required directory authentication ports I believe. If there are any tricky ones please let me know
I am able to successfully connect to the VPN and route all traffic to the delegated IP when on my local network. However when ever I'm away from that network - friends, work, and various other tested internet connections - I am unable to connect to the VPN.
I've ruled out the SLS firewall by turning it of for several days and trying to connect at several locations. I've checked the log on the VPN and there is no record of even an attempt to connect.
In Security of Server Preferences i have exposed the VPN on the airport extreme. I've tried both with and without port forwarding. As far as i know (correct me if I'm wrong) because I have my domain name resolving to my server then I don't need port forwarding. My DNS works for all other services on the SLS.
Any ideas at to what I might be doing wrong? Things I could try to isolate the problem?
Any suggestions would be very handy!
Best
-J

Your Airport Extreme does not contain a DNS server.
Ensure MobileMe is disabled at your Airport. That messes up VPN pass-through.
From a remote network, confirm that all of the necessary ports are open via nmap or Applications > Utilities > Network Utility or other tools.
Quadruple-check the list of ports (and preferably with a second and third technical resource), as the Apple documentation around L2TP port pass-through with Airport and Time Capsule is murky.
Ensure that you don't have the same subnet on both ends of the VPN connection as that can interfere with IP routing.
Also try testing with PPTP, in place of L2TP.
I'm in the midst of tussling with a recalcitrant VPN router myself, but that's another topic.

Two active active ISPs with load balancing, publishing and VPN connection

Hi,
I wonder how to enable a scenario where i have to use two ISP's to share 30/70 load on our internet traffic, have to configure almost 60 internal websites already published using microsoft TMG firewall and connect client VPN connections and site-to-site vpn connections. I know that ASA firewall has limitation when using security contexts. Is good idea that how to achieve this gool?
I previously tried connecting four sites running ASA devices with this fifth site running Microsoft TMG firewall but i was able to connect only two ASA firewalls using site-to-site VPN, though I was able to connect remaining two as well but last two were not able to access ASA-TMG resources. furthermore behavious of two ASA-TMG connected sites was strange: sometime i was not able to access cross site resources from one machine but was able to do so from another machine.
I noticed that two of ASA sites connected with TMG site has different internal IP class (e.g site one 192.168.0.* and site two using 172.16.*.*) while remaining two have same class like the first site e.g 192.168.128.* and 192.168.100.*
Did anyone has experiance connecting TMG-ASA with multiple sites within same IP class scenario?
OR
How to enable same features using Cisco devices as they are on a single Microsoft TMG?
Best,
Saulat (Contact# 0092-321-4025587)

Sulat,
You can load balance between the two ISPs. That is not possible. But, we do have some options that I have discussed here:
Hope the above link gives you some ideas to utilize both your ISP links.
-Kureli

Possibility to configure Freedome VPN connection on unsupported devices

Similar Messages

Maybe you are looking for