Possibility to create subscription for IR Graph.

Hi All,
Subscription is a very nice feature that Apex came up with version 4.
But what is missing is that we can only create subscription for IR Reports.
Is there anyone knows a possibility to create a subscription for a IR graph?
And also is there a possibility to create subscription that produces an HTML same as IR report layout? (Coloring, Grouping etc.)
Thanks,
Osman.

Aline,
One option is changing the properties of the key figure from 'Always Show' to "Hide can be Shown'. This will let the user select the required key figures to display after executing the report. In this case you can hide all the key figures and give the option of selecting the required keyfigures for display after executing the report.
Second option is to use a text variable and derive a mechanism of displaying the key figures for what the user selects. This is a bit tedious process. I would recommend you to go for the above said option. and still if you want the other mechanism to work I will give it you, but need sometime to detail that.
Hope this helps you.........

Similar Messages

Create subscriptions for Powerview reports like SSRS reports in SharePoint 2010

Hi,
I have created the power view reports in SharePoint 2010 and now I want to create an email subscription for Powerview reports like SSRS reports in SharePoint 2010. Is it possible? If not, is there any workaround?
Thanks,
Suresh.

Hi Suresh:
Unfortunately, you can't setup subscriptions in PowerView like you can on SSRS. I would suggest you to open up a connect item here and request for this feature - http://connect.microsoft.com/SQLServer
Hope this helps.
Faisal Muhammed My Blog

Is it possible to create LSMW for PQ10, PQ13?

Hi Fridz,
I have created the OM actions, now I'm trying to create LSMW for the actions PQ10 (creation of org unit), PQ13 (Creation of Position) but while recording LSMW relationships are not creating under - Maintain Field Mapping and Conversion Rules in LSMW. Please advice on this whether these transactions are possible to create LSMW with fore & backgroung.
$Narayana

Hi Narayana,
Use BDC's for better maintainance of relationship. which worked fine for me.
thanks,
vasu.

Is it possible to create shortcuts for Faces in iPhoto or Aperture?

I am naming hundreds of faces.
The auto detect function has exhausted all its options, so am now doing the remainder manually.
Is it possible to create a shortcut for: 1) add a face? 2) specific names of faces?
As am I doing hundreds its quite a laborious task.
Thank you

No. The max no. of months you can create a calendar with is 24. You might try using iCal. It's perpetual.
OT

Is it possible to create LABViewApplication for our own Hardware?

Hi everybody...
We have designed our own Data Acquisition Hardware...earlier we were developing GUI application using VC++ for that hardware..
Is it possible to create GUI application for our own hardware?..(Serial port,parallel port,ethernet,TCP/IP,USB)..
(not NI Devices)
if possible then how to communicate with our hardware....(how to send & receive commands b/n appln software & our hardware)
need to write any protocols...(then how to write it in Labview)
i tried something like configuring the channels.....i found difficult to do that..
is there any way to do that
i attached our GUIappln jpeg file with this msg as attachement(i need these to be implemented in LabVIEW)
help me regarding to that appln ..
thanks...
Attachments:
jpeg1.bmp ‏1451 KB

Itjalal,
Absolutely. By all means.. NI software tools are not used exclusively with NI products, although in most cases, you'll appreciate that
You can create your own custom GUI in LabView or LabWindows-CVI (if you are more familiar with C/C++ and need to create instrument drivers). The benefit of using LabView is to be able to create a custom GUI and the tests quickly. You have all the choices for communication (Serial port,parallel port,ethernet,USB).
LabView is designed with the end-product in mind, however, you will have to prepare your protocols (drivers). I typically create them using LabWindows-CVI as wrapper functions, but if you can communicate to your product directly using software like HyperTerminal or using a TelNet session, then you can communicate with the product by simply using LabView. Even parallel port communication is simple.
To answer your question on how communication is accomplished, you will have to let us know the following:
1. what version of LabView that you are using?
2. how do you "manually" communicate your your product at the moment?
3. what is your preferred communication method? (Serial port,parallel port,ethernet,USB)
4. do you have existing communication protocols?
5. how did you try to configure the channels? can you provide a brief explanation?
The GUIappln jpeg can be created using LabView. Let's start with the questions above.
Please keep using this thread as it can contain all the steps to get you to success.
And remember: have fun with LabView (experiment with it).
JLV

Create subscription for overrided monitor

Hello guys. Have an issue:
I've created a new monitor for all Servers(Windows Server Operation System Target), set it to disabled. Then I override it to specific group with other thresholds. Alerts are going well, but e-mail do not go. Trying to create subscription from scratch, select
my monitor (which is disabled) - still mail doesn't come. Questions are:
1. If I make a subscription from alert, will this subscription apply to all server's group, to which I overrided monitor, or only server from which I created alert?
2. Can I make a subscription from scratch to this alerts (need to change description, but cannot go to next line if creating from alert)
3. How can I make a e-mail separation, depending on server group? I.e. I want alerts, generated by overrided monitor specifically for BizTalk servers group to send to BizTalk admins e-mail etc. As I understand, I need to add to subscription criteria "raised
by any instance of specific group"?

Hi,
1) As your Monitor is disabled for all Servers by default and you only enabled for the Servers where you need it the subscription will apply to all Servers where Monitor is enabled.
2) Yes you can create the subscription from scratch
3) You have to create a Subscriper for each group and configure it in the subscription. If the same Monitor is running for different Server groups with different responsible departments you have to create a subscription for each department and configure
the "raised by any instance in a specific group" Condition.
Cheers
Christoph Maresch | My blogs: blog.cmaresch.at | XING:
Christoph Maresch
| Linkedin:
Christoph Maresch

Is it possible to create deployment for Adobe Acrobat Standard XI ?

Hi I tried to create deployment for Adobe Acrobat Standard Product, But I could not find the source file for Acrobat standard deployment !!
Kindly help !!

Hello Anubha,
Yes, it can be deployed.
Kindly follow the link to understand the deployment steps in detail.
http://blogs.adobe.com/acrolaw/2013/02/acrobat-xi-deployment-guide-for-large-firms/
Thanks,
Sudhakar Kuttuva
Senior Associate (Training & Technical Support)
M: +971 56 7709424
T: +971 4 4471400
F: +971 4 4471411
E: [email protected]<mailto:[email protected]>
ISO 9001 Company W: www.caddemirates.com<http://www.caddemirates.com/>
PO Box No. 50640, 9th Floor – PRISM TOWERS, Business Bay, Sheikh Zayed Road, Dubai, UAE.
IT Infrastructure | CAD & Engineering Solutions | HOSTECH – Hospitality Solutions | Networking & Security Solutions |
Disclaimer: This communication contains information that is confidential, proprietary in nature and/or privileged. It is for the exclusive use of the intended recipient(s). If you are not the intended recipient(s) or the person responsible for delivering it to the intended recipient(s), please note that any form of dissemination, distribution or copying of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender and delete the original communication. Please be advised that neither CADD Emirates, its affiliates, its employees or agents accept liability for any errors, omissions or damages caused by delays of receipt or by any virus infection in this message or its attachments, or which may otherwise arise as a result of this e-mail transmission. Thank you for your cooperation.
Please consider the environment before printing this email message.

Alert Subscriptions - creating subscriptions for groups of computers and alerts from monitors

I've run into something kind of odd.
We want to "tone down" some of our alerts. Let me explain.
We monitor, roughly, 300 servers. We created an alert subscription to notify us of alerts for the monitor "Computer Not Reachable".
We found that we often received false positives. I made sure our check interval was 60 seconds and the heartbeat was set to 3 missed heartbeats and then set the delay to a period of time.
That worked. However, we wanted to change the delay based on the server "group". Example: Production group and Test Group. For production, delay 5 minutes, Test, delay 30 minutes.
As soon as tried to add the group criteria to the alert subscription, notifications ceased to function for those alerts. The alerts still occurred, but the notifications were never delivered.
So, I created new subscriptions and new groups as a test. Each time, if I included a group in the criteria, the alert notification failed.
Example:
Condition: Raised by any instance in a specific group. Checked, group name: Test
Condition: created by specific rules or monitors. checked, monitor: "Computer Not Reachable"
Subscriber: [email protected]
Channel: smtp channel set up to a relay
Alert Aging: 30 minutes (have set this as low as 5 minutes and send without delay).
In each case, if I remove the condition of group, the notification is sent.
Why would this behavior occur?

Thanks Scott. I've tried this both with the computer object and the health service watcher object.
What I'm doing is trying to create a dynamic group based on OU. So, right now, the groups include the computer objects. If I view group members, the group membership does populate ok with all of the machines from the targeted OU's for the dynamic
membership.
This is an example of the dynamic membership conditions I'm trying to create:
( ( Object is Windows Server AND ( Organizational Unit Equals OU=Test,OU=Servers,DC=domain,DC=local ) OR ( Organizational Unit Equals OU=Development,OU=Servers,DC=domain,DC=local) ) AND ( Object is Health Service Watcher AND ( Display Name Greater than empty
value ) AND True ) )
However, I'm noticing that the dynamic membership includes health service objects from all windows servers from all OU's and ignores the OU membership conditions. But, I don't think that has anything to do with the failed notifications.
I could be wrong.
I've also tried the following with the same problem:
( ( Object is Health Service Watcher AND ( Health Service Name Greater than empty value ) AND True ) AND ( Object is Windows Server AND ( Organizational Unit Equals OU=Test,OU=Servers,DC=domain,DC=local ) OR ( Organizational Unit Equals OU=Development,OU=Servers,DC=domain,DC=local
Both of the above groups populate both the computer and health service objects when viewing the members of the group with the problem being it adds all health server objects instead of limiting it to the OU's specified.
So, that lead me to a dynamic group membership of:
( Object is Windows Server AND ( Organizational Unit Equals OU=Test,OU=Servers,DC=domain,DC=local ) OR ( Organizational Unit Equals OU=Development,OU=Servers,DC=domain,DC=local ) )
This is what I have now (this morning) after adding the condition for the class.
So, for the alert subscription rules, I added the group and the class and the monitor name:
Condition: Raised by any instance in a specific group. Checked, group name: Test
Condition: Raised by any instance of a specific class: Health Service Watcher
Condition: created by specific rules or monitors. checked, monitor: "Computer Not Reachable"
Subscriber: [email protected]
Channel: smtp channel set up to a relay
Alert Aging: 30 minutes (have set this as low as 5 minutes and send without delay).
But, again if the group condition is present, the alert subscription doesn't work.
So, I suppose what I need to do is find a way to ensure I can build a group that includes health service objects from computer objects reside within specific OU's. Perhaps I'm going about the dynamic membership conditions incorrectly?
Thanks
Ted

Is it possible to create categories for publications?

I would like to create an app containing publications from multiple collections, and I would need to navigate each publication to see the publications of each collection. Is there a way to do that?

Hi,
Technically - possible. Functionally, cannot understand the reason to have AFAB in LSMW...
To create LSMW, please read available material on help.sap.com or search SDN.
Regards,
Eli
P.S. For the two last transactions, it's better to use BAPI method in LSMW and not transaction recording, but it's up to you.

Is it possible to create invoice for Free of Charge order

Dear All,
Is it required to create a Billing document for an Free of charge order as far as Indian scenario is concerned.
We are not charging any value to the customer for Free of Charge. Free of Charge order value will be Zero only.
In this case, is it required to abide with invoice while sending the materials to the customer.
Regards,
Mullairaja

Dear Reazuddin,
But in FOC orders value will be zero.
PR00 value will be compensated with R100 condition type.
But Excise condition type will be calculated on Basic price.
When the basic price value, how the system calculates the Excise condition type values.
Could you please clarify?
Regards,
Mullairaja

Possibility to create variants for parameters in Crystal

Dear all,
I am using crystal reports 2008 SP6. Most of the report are referring on BI queries. In BI queries our users are using variants to save several filter values.
I already noticed that in Crystal there is a personalize button, but this the user allows to just save more or less just one “variant”
Is there a way for the user to save several variants in Crystal like it is possible in BEx. Any idea would be great.
Best regards,
Stefanos from Munich/Germany

when you insert a DTP, it doesnt ask you for a variant infact it will ask you for the technical name of the DTP. Or you referring to some other variant?

Is it possible to create Thread for Swing Components or for JApplet?

Can i create a Thread by extending Thread class or implementing Runnable interface for Swing Components?
Can i create a Thread by extending Thread class or implementing Runnable interface with JApplet?
thanks

Does your website live on a Windows server? The above link you posted will require a Windows server for that to work but if you do, then you should be able to just follow the links instructions.
If your site is not on a Windows server (maybe it's on Linux?) then you would most likely need a PHP solution - something like this: http://www.w3schools.com/php/php_mail.asp. Depending on your host, they might actually have a ready-built form script for you to use so it might be best to ask them first.
You might also want some kind of validation to ensure you receive the correct information so something like jQuery Validate could work.

Is it possible to create Webservice for Classes and BOL Objects?

hi all ,
i am new to sap crm please help me out.
thanks and regards,
Ahmad

Hi Narayana,
Use BDC's for better maintainance of relationship. which worked fine for me.
thanks,
vasu.

Is it possible to create shortcuts for iTunes that work no matter what program I am in?

My keyboard doesn't have media shortcuts. I want to create the media shortcuts using my F keys. How would I go about doing this so that no matter what program I am in, the shortcut speaks to iTunes?

This is probably occuring because your Mac is attempting to wirelessly sync with a device. Try unchecking the checkbox that reads "Open iTunes when device is connected" (this option can be found under the general page of iTunes when you have a device connected).

TS2481 I don't want all my contacts on my iPhone5 but I want my calendar sync-ed i.e. totally up-to-date. Is it possible to create settings for sync-ing?

The sync-ing program will warn me that it's about to make massive changes to my contacts on my iPhone i.e. add in a whole bunch of contacts that I don't want on my phone. At that point I can cancel the sync and stop those contacts from being added. But as a result, my calendar is not getting updated. Seems to me there should be a way of controlling what gets sync-ed and what doesn't. But so far I haven't been able to find a way to do that. Thoughts?
Incidentally, I have no idea if I'm in the right community...

Don't know about your contacts, but for you calendar be sure you have selected your iCloud calendar as your default calendar on your phone. Settings>Mail,Contacts,Calendars>Defaut Calendar>choose Calendar under your iCloud email address (not Calendar under On My iPhone). You might want to review this to be sure you have set up iCloud correctly: http://www.apple.com/icloud/setup/.

Possibility to create subscription for IR Graph.

Similar Messages

Maybe you are looking for