Possibilties in KE24 reports(COPA line item reports)

Dear Experts,
i have created one characteristics Agent and same is appearing in ke24 report but description is not coming same with material Group.
my client want to see material group description and Agent code description in ke24 report.
Request you to guide me on the same.
regards
RK

Hi
Try to change the Layout and see if Material Description is available... I am not sure if it is
The purpose of a COPA report is to analyse KPIs like Gross Contr 1, Net Profit of a Product, etc... This purpose cant be served by KKE24, as it just displays the values as posted... So, to me, KE24 does  not make much sense
br, Ajay M

Similar Messages

  • COPA line item report, Number format  -output type - object list(ALV).

    Hi,
    I am preparing COPA line item report. I want to change number format (two decimal place). I did the changes in form level then I did the changes in drill down report as well and saved as save definition.
    But changes are not reflecting in- output type - object list(ALV).
    Please provide help in this.
    Regards

    HI
    What t-code you are using to write this line item report ?

  • KE24 line item report  ( profitability line item report)

    Hi all,
    we need sub total sale order wise automatically in KE24 line item report  ( profitability line item report)  . How can i do for this .
    could you please help me.
    Regards,
    K.Satish
    [email protected]

    Hi,
    Please forward the same to my mail id:[email protected]
    Thanks in advance.
    Regards,
    Prasad

  • Delete of Element in Form for COPA line item report

    Hello
    I would like to change a form used for a COPA line item report - delete an element, which has been included for years. Unfortunately I got message, that 'You cannot delete, because element xxx is dependent'.
    If I insert a new element if have no problems to delete it afterwards.
    Can anybody help me?
    Thanks in advance.
    Best regards
    Søren Kirch
    LOGSTOR A/S

    Hi,
    To my knowledge, you cannot delete the element until you assign the new one in the form if only single element is assigned.
    In case anymore element is there, there can be possibility this element is taken into consideration for making formula.
    Regards,
    Harish

  • Display COPA line item report-KE24

    Hi Experts,
    Do we get the correct COPA line items by using the standard transaction code KE24. Is this report is useful to compare the values of the report KE30 which we define.
    Please clarify.
    Regards,
    Ram

    Hi All
    I had created sales order( MTO).
    Sales Order No 61224069 u2013 50
    Sales Order line item 40 created > PR & PO created (MD02) > MIGO > Delivery of Order (VL01N) > Settlement (VA88) >Billing( VF01) > Settlement (VA88).
    I have two COPA Document and Material Price updating 2 Time in COPA report.
    Please let me know Its Process error Or Configuration error.
    If Process --  Please let me know the correct process
    If Config    --  Please let me know where to check
    Thanks In Advance.

  • Changes in MM02 not reflecting in COPA lin item report

    Hi,
    In my project during data conversion material was grouped wrongly. We realised it later once we started designing COPA reports. The material is used by seven company codes. The basic material group defined in basic data is used by all company codes while Material group 1,2,3 4 and 5 are used by company specific defined in sales orgs 2 View in MM master(MM01).
    I am designing report for three companies by using material group 1,2,3,4 and 5.
    We tried changing the material group 1,2,3,4 and 5 for wrongly grouped materials in MM02. But in COPA report these changes are not reflecting. The grouping in report is still as per the data conversion grouping.
    Please suggest on how should we rectify our material grouping to reflect in COPA report.
    Regds

    Hi,
    in COPA reports characteristics are read from the COPA tables, they are not dynamically derived at the time of executing the report. In the COPA tables oyu will find the characteristic as derived at the moment of posting the line item.
    If the characeristic that you want to rectify is in the definition of your your COPA segments - which you can check through TC KEQ3 - then there is possibility to carry changed master data over to past COPA data.
    TC KEND allows you change the existing COPA segments according to current master data. However, it will not make changes to table CE1XXXX, where COPA line items are stored, but changes happen on the segment level (CE4XXXX).
    This means that you always see the changes in COPA reports that read from segments, but not in line item based reports.
    To change your output from line item based reports I see no other possibilty but to make correcting entries in CE1XXXX using KE21N or KEFC.
    If you should consider using KEND please read the documentation for "realignment". It can create problems, for example if you have a SAP BW that is delta-updated from CE11XXX. Also your summarization levels for COPA have to be rebuilt after KEND.

  • RE: COPA report and customer line item report not matching

    Hi All,
    COPA report and customer line item reports (fd10n) are not matching please let me know the reason.

    ok

  • CO-PA Report: Incorrect Drill-Down to Line Item Report result (KE32 / KE34)

    Hi There
    We have created a CO-PA report and assigned the ability to call up the CO-PA Line Item report (KE24).
    When we drill-down from a cell within the report for an actual amount for a specific period, the line item report displays the line-items from the prior period?
    Any assistance would be greatly appreciated.
    Thanks
    peter

    hi
    add another columns and populate the formula as required.

  • **URGENT** - Vendor Line Item Reporting

    Dear Gurus,
    Need some “URGENT” help with regards to Vendor Reporting?
    Our business has requested for a Vendor Line Item / header Report, which will display ALL Vendor Items “NET” (before tax).
    At the moment our business it manually taking out Tax in FBL1n (Vendor Line Item Report).
    Please could you kindly let me know if there is ANY report in SAP which displays the Vendor Items NET & GROSS??
    Thanks Very Much
    RICK
    Edited by: Rick Desilva on Apr 22, 2008 4:00 PM

    Hi  Shridhar,
    All I want is a "net column" - Which will display the vendor invocie amount - BEFORE VAT (Tax).
    So on FBL1N or Another SAP-Vendor Report what I need is a
    Net Amount column and a Gross Amount Column.
    I hope this makes sense and someone can assist....
    Thanks & Regards
    RICK
    Edited by: Rick Desilva on Apr 23, 2008 9:36 AM

  • Asset Balances & Cost Line items Report

    Hi,
    I am looking for a Report which would combine Asset (S_ALR_87011963)balance report and Cost line item Report(CJi3) for Projects.

    Hi,
    The flow is like this ( if u r using timesheets for confirmation):
    CAT2 : Timesheet: Enter Times : User enters the time.
    CATS_APPR_LITE  : Approval of timesheet
    CAT5  : Transfer to Projects.
    This will post cost to Projects.
    Another way of getting the Actual cost is Confirmation using CN25 or CN29.
    Regards,

  • WBS Element on AR/AP Line Item Report

    Hi All
    When I run the FBL1n report for a vendor who has a PO which has a WBS element - I dont see the WBS element coming up on the line item report(s).
    Although the field is there on the layout - it is not picking the WBS Element into the report - can anyone please tell me why this is and how I can get this field to fill with values...
    Thank you
    Rukshana

    hi,
    If you had activated Project Cash Management, you can try report CJIA which can substitute the report line item wise list for a particular project or for a Particular Vendor.
    Why the standard system is not showing WBS because, a single Vendor line can be posted against multiple expense so system cannot determine which WBS to be shown in the report so it is left blank in reports, this will be applicable for Purchase order no, Cost Centers, WBS etc.
    As suggested by Suresh you can use the BTE 1650, but it will keep one WBS in the line even you have multiple WBS elements used for the document posting.
    For Ex
    Expense 1 Dr  1000- WBS 1
    Expense 2 Dr  1000- WBS 2
    Expense 3 Dr  1000- WBS 3
    Vendor A Cr    3000
    Against Vendor line item A - it will show WBS 1 alone.As there is no standard solution you can use BTE if your are satisfied with the above example or you have to activate Project Cash management to find the exact reporting but in different reporting structure.
    Thanks and regards
    Praveen.J

  • AP Line-Item Report for State Auditors

    Dear Members,
    I am preparing one Report named AP Line-Item Report for State Auditors and i need the following fields in my report.
    Check Number                PAYR-CHECT
    Voucher Number             BSEG-BELNR
    Check Date                     PAYR-ZALDT
    Voucher Date                     BKPF-BUDAT
    Vendor Number             LFA1-LIFNR
    Vendor Name                     ADRC-NAME1
    Vendor Street Address     ADRC-STREET
    Vendor City                     ADRC-CITY1
    Vendor State                     ADRC-REGIO
    Vendor Zip Code             ADRC-POST_CODE1
    General Ledger Acct No     BSEG-HKONT
    Purchase Order Number     BSEG-EBELN
    Tax Status Code             BSEG-MWSKZ
    Taxable Amount             BSEG-HWBAS
    Exempt Amount             BSEG-MWSTS
    Tax                                     BSEG-MWSTS
    Tax Accrued                     BSEG-MWSTS
    Total Invoice                      BSEG-DMBTR
    I am new to FI.So I request some one please let me know which datasources contain the above fields and which CUBE is best suited for this.
    Thanks in Advance for help and quick reply is much much appreciated.
    Best Regards
    RC

    0VENDOR_ATTR - Vendor Master Data Attributes
    0FI_AP_51 - Check Register Line Items
    0FI_AP_4 - Accounts Payable Line Items
    It should be noted, however, that this won't get you everything that you need, so you may have to create enhance one or more of these DataSources and create User Exit ABAP code to get the required data. Also, the 0FI_AP_51 DataSource isn't available if your source system isn't ECC6 EHP3 or higher. If your source system is less than that, you're going to have to create a generic DataSource for the data from the PAYR table.

  • Line item report on secondary cost element (cat - 21)

    Hi Gurus,
    Secondary cost element with category 21 is used for internat settlement from order to wbs or wbs to cost center. But can we see line item report on this cost element. Or we cannot see any line item report on this cost element. it is just used for internal settlement purpose.
    Please clear this doubt. thank you

    Hi Mohit,
    I hope you can have line item report @ order and WBS element stright away...
    for orders use: KOB1 transaction code for actual line items, where you have the facility of entering CE or CE group to find the vaues related to particular cost elements in the order. If you are flexible with CEs related to 21, give there otherwise create a CE group specific to 21 category and enter the group and find the results you want.
    same way for WBS elements/projects: we have transaction code CJI3 for actual line items, here also we can enter CE or CE groups
    Not only for actual line items, we have the option of viewing plan line items, budget line items, and commitment line items @ both order and WBS level with different transaction codes other than mentioned above, like KOB2, KOB3, CJI4, CJI2 etc
    I hope it helps a lot if I understand your query right
    Regards..
    Jose

  • Line item report with Customer number

    Hi all,
    I am facing the following issue:
    I need a line item report to analyze an accrual account by customer.
    Since the customer is not captured on the accrual account itself, but on the recon. account (which is not defined as line item display), I did not find a way to present the customer and the accrual  on the same line.
    I can always go to BSEG and vlookup and match by document number the accrual account and the customers from the customer recon. account, but I thought maybe someone has a better idea.
    Thanks,
    Yoel.

    If the recon account line items have al lthe info needed I'd suggest using a query (SQ01).
    1. Create an Infoset in SQ02 with logical database "BRM". Choose the fields from BSEG that you need
    2. Create the Query in SQ01 using that Infoset.
    If you want to see individual line items, include the fields you want in the "basic list" of the query. If you want totals by customer, don't include anything in the basic list, but make a "statistics" with customer and amount.
    Selections would habe to be made for account no and period.

  • Create AP/AR line item report for parked items

    Dear all,
    Has anyone been able to create a line item report in AP or AR that includes parked items? I have created an aging report using standard 0SAPDUEAN-01 as a base, using report painter. Now the Finance department want to be able to see the numbers of the parked invoices as well but I am not able to find a way to pull these.
    Does anyone know if this is actually possible?
    many thanks

    Hi,
    by using of TCODE. FBV3 it is displaying parked documents
    based on document type.
    K.Satish

Maybe you are looking for