Possible Battery Problem - Need Confirmation..

Hello all,
I bought my 3rd generation iPod last year knowing the batteries dont last forever, I bought it off of someone else so it had already been used beforehand. I have had great use from it however even if I fully charge the battery it cuts out within only 5 minutes of playtime. It will turn on and show an apple only to cut out again.
I basically just need confirmation whether this iPod needs a new battery so that I can purchase a new one or send it off to be sorted, what I dont want to do is send it off not knowing what the actual problem is.
I would appreciate if someone could just comment on this situation as soon as possible so that I can resolve this.
Many thanks in advance from whoever helps.
Sean.

Try these:
- reset, several times
- update the firmware
- calibrate the battery and the battery meter
If noe of these work, Apple will replace the battery for $60. You can do itself cheaper but, unless you've done this before, it's easy to turn a small repair into a large one.

Similar Messages

  • Possible Battery Problem?

    I've had my macbook pro for 2 days and when i left my computer to sleep for about 9 hours, the battery charge percent went from 100% to 99%, but yet it says its fully charged and the lights on the side say the same,
    is this something to be concerned about?
    Thanks.

    Mine's plugged in and it's at 96% right now. When it gets to around 94% it will charge back to 100%.

  • IPad Air battery problems, need help ASAP!

    My iPad Air battery drains EXTREMELY fast and it's supposed to have up to 10 hours (only 2-3 hours for me) and my iPad charger keeps charging backwards and it always dies even though it's charged. This makes no sense at all and it frustrates me because I have to leave it alone while charging but I want to go on it while charging. The charger takes FOREVER to get to 100% when not using it. My iPad Air is a 128 GB with wifi. Please help and tell me if this happens to you also. Thanks.

    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
    http://support.apple.com/kb/TS2802
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    iOS 7 Battery Life Draining Too Fast? It’s Easy to Fix
    http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    iPad: Charging the battery
    http://support.apple.com/kb/HT4060
    Best Practices for iPad Battery Charging
    http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • 4S battery problem - phone dies, can't charge or turn on??

    Having some possible battery problems with my iPhone 4S.  I'm on Sprint, with the latest iOS and running on Windows 7.  It all has to do with when the battery dies, and has happened 3 times already...
    1. battery died, this happened:
    (about a month ago)
    plug in to PC via USB, low battery sign (with small sliver of red available).
    almost immediately (about 2 seconds), apple logo startup screen appears.
    about 20 seconds later, vibrates twice.
    a second later it flashes the lock screen then goes to black with a spinny wheel for about 5 seconds.
    then the apple logo startup screen shows again...and same thing repeats. 
    does not charge at all.  same problem when plugged in to wall charger.
    somehow the next day I got it to show "connect to iTunes" screen, and restored the iPhone.
    2. battery died, same cycle happening.
    (about two-three weeks ago)
    I left it alone for a week & set a Genius Bar appointment.
    somehow, the day before the appointment, I was able to plug in the iPhone, charge it, and turn it on with no problems at all.
    I took it in anyway to the Apple Store and they did a "firmware restore", supposedly different from the restore I did on my home computer.
    3. battery died, same crap again.
    (yesterday...)
    possibly interesting to note was that the battery was fully charged and left alone for the day, but was dead when I checked on it in the evening.
    I think something is happening where the battery isn't actually completely drained - so the second time around when I got lucky, the battery had fully run out... so when I plugged it in to charge it didn't try to turn on straight away (because it couldn't). 
    ...Not really sure though.
    Any thoughts?????

    Could possibly be the battery, I just thought if you remove the battery then try turning the phone on with the charger plugged in and see if that works, but then realised it doesnt as I just tried it, so ignore that one ha ha. Id try another battery in it and see if that solves the prob, if that doesnt work, it might either be totally screwed or just might need re flashing if the firmware has gone down the pan for some reason.

  • Hi, after updating my iphone since 2 weeks back now i am facing a battery problem i charce fully my iphone and by the end of the day my iphone shuts down it needs to be charged again and if i didi some calles it leaks after few hours. Please adivse me.

    Hi, after updating my iphone since 2 weeks back now i am facing a battery problem i charce fully my iphone and by the end of the day my iphone shuts down it needs to be charged again and if i didi some calles it leaks after few hours. Please adivse me what to do.

    I final piece for me in the jigsaw following on from this
    http://www.care4pcs.co.uk/2012/10/how-to-be-happy-gmail-user-on-iphone-or.html 
    is to turn off wifi when you do not need it. When I leave the house I turn off wifi, because the majority of the times when my iPhone has got very hot and crashed is when I am away from home. I suspect that if the iPhone is in the vicinity of public wifi (wheather secure or not secure) it will try and connect, even if you have 'automatically join known networks' set to off. This is easy of course if you have an unlimited data contract for your iPhone. I may be wrong, but it is working for me. It makes sense for me because it is another way of reducing the work the processor (and battery) has to do and therefore reduces the chance of overheating.
    Having said that, I never had this problem with my iPhone 4. I now have a 4S.
    Try it. Hope it works for you.

  • Hi my name is Vajra from INDIA, i am using ipod shuffle 3rd generation but it is not working properly due to battery problem, i need to change the battery please guide me how to change the battery or any chance to replace the ipod shuffle 3rd generation ?

    Hi my name is Vajra from INDIA, i am using ipod shuffle 3rd generation but it is not working properly due to battery problem, i need to change the battery please guide me how to change the battery or any chance to replace the ipod shuffle 3rd generation ?

    Seems no one care about us .no one replied till no@!!!!@ strange

  • Lenovo B560 Battery problem! Need help asap

    Hi, I have a big problem with my Lenovo B560.
    Recently I started noticing the charging icon in the bottom right corner of the screen would go briefly from "charging" to the icon for "not plugged" (just the battery). If I moved the power cord a bit it would go back to normal.
    Days later it happened again but this time a little more persistent. I didn't give it much attention. And then suddenly, last weekend it stopped charging altogether, despite being plugged. I tried different power sources, I tried moving the cable around, nothing. With the little time I had left before it completely discharged, I googled the problem and saw somebody in a thread saying "it's likely tha battery, it needs replacement", which made sense to me, since my laptop is 3-years old. 
    I ordered a replacement battery and waited. Today it arrived and I put it in, eager to use my computer and have everything going back to normal. I turned on the computer, battery was at 50% but it still did not charge. It showed the battery icon like before, as if it weren't plugged in. I moved the cable around again and noticed it would briefly flash back to being plugged. And then it stabilized on "plugged in, not charging" but it was suddenly at 3%. However, at least it didn't go down this time. 
    I tried reinstalling the Power Management Driver, restarted, everything was the same. Then I went to Device Management, I disabled the Driver and the icon dissapeared. Restarted, reinstalled driver once more, icon was still gone.
    Then I noticed in another thread somebody recommended taking out the battery and turning on the computer with just the power cord plugged in. So I took out the new battery and turned it on with just the power cord. And it worked, and that brings us to the present moment. Both batteries sit next to me and my computer is currently working simply on the power that is supplied by the power cord. 
    Can anyone please tell me how to get out of this mess? My job relies greatly on this computer working, and I need to fix it asap. Any kind of advice is welcome. Thank you!

    Update: the computer will not turn on anymore, not even with just the AC cord and no battery. Please help.

  • Anybody that has ever had, or still have battery problems....

    Please join me in finding a solution.
    Lets all converse in this thread about battery problems. I Have noticed many many many battery and power problems going unresolved in this discussion forum and I think if we all get organized into one thread and work together we may find a solution.
    If you haven't read of my battery and power problem before here is the run down.
    -battery won't charge(0% and then eventually "No Batteries Availiable")
    -Battery is NEW. It is valid(works in other iBooks).
    -Its not the DC-in board. No, no... I replaced that and it did nothing, it probably won't help you either.
    -I've done all the pointless stuff.(Resetting PMU, PRAM, NVRAM, Deep Reset PMU)
    -Battery is Charged(Used my friends iBook). Yet my iBook will not power on from the battery.
    Now. I know many iBook owners are having the same problem. I have worked countless hours on this problem and I am never going to give up.
    Now throughout searching countless forums of Battery Problems I have gathered some observations.(All these observations are only taken from cases similar to mine)
    -They have the same problems I have stated.
    -All the Resets in the world don't help them
    -Some of them mention a noise coming from the iBook.
    -Some of them mention buying third party power Adapters.
    -The thread usually ends with them asking more questions and replies never come so they give up.
    -They all usually go unresolved or Solved in the case that they just buy a new laptop.
    So taking that I am pretty sure that this problem needs to be solved. I have been giving it a good try but without information I just cannot get too far.
    Any of you people with the same problem as me... We should all compare certain statistics and symptoms to see if we can zero in on what the problem is.
    These are my suspicions.
    I purchased My Power-Adapter from Ebay. It looked legit and everything and it provides the iBook with power pretty well. Yet I stumbled across something. It says on the Power Adapter that it is a 65(watt) Power Adapter. But when I check in the System Profiler, This is what it reads:
    AC Charger Information:
    AC Charger (Watts): 45
    Connected: Yes
    Now why would the Power Adapter say 65(watts) but when I check the stats on my iBook it receives 45(watts). I have checked all the stats of these iBooks and I know that they need 65(watts) to function properly. Some people say 45w will power an iBook fine but I think this is why the battery won't charge. The power Adapter I bough online clearly stated that it will work correctly on my model and it Even says 65w on the adapter. Remember the faulty batteries? Could people be possibly making faulty power adapters and selling them now too? My friend has moved so I cannot test his "Apple" adapter to see if it works.
    I also think this may be the cause of these processor sounds(That are stupidly diagnosed as HD failures) that some people like me get. I found out if I turn the processor down to "reduced" the sound goes away. Maybe the "whizzing" sound could be a capacitor being overworked so it can provide the processor with power or the processor itself but I really think these issues are related.
    In saying that... This is what I want. Anybody out there that has the same(or similar) problems as I do, please do this:
    -State the issues you are having with your iBook.
    -Go to System Profiler and Under Hardware click Power, copy all of those statistics in the right pane and paste them in your reply.
    -Say what kind of iBook(or Powerbook) you have.
    -Say what kind of battery and what kind of Power adapter you have.
    -Ask for other statistics that you think might help you.
    -If you have any ideas of what the problem is please tell me.
    -And if you already know a solution please tell us all.
    We can all tackle this problem if we work together.

    I can't speak to all of your problems, but there are a few things that may help.
    +I purchased My Power-Adapter from Ebay. It looked legit and everything and it provides the iBook with power pretty well. Yet I stumbled across something. It says on the Power Adapter that it is a 65(watt) Power Adapter. But when I check in the System Profiler, This is what it reads:+
    +AC Charger Information:+
    +AC Charger (Watts): 45+
    +Connected: Yes+
    +Now why would the Power Adapter say 65(watts) but when I check the stats on my iBook it receives 45(watts). I have checked all the stats of these iBooks and I know that they need 65(watts) to function properly. Some people say 45w will power an iBook fine but I think this is why the battery won't charge. The power Adapter I bough online clearly stated that it will work correctly on my model and it Even says 65w on the adapter.+
    You are incorrect about this. The adapter that shipped with iBooks, initially, was a 45-watt model. 45 watts is all it takes to properly run the iBook and charge its battery. The iBook registers the adapter as 45 watts because the iBook only takes the amount of power that it needs. A Powerbook needs the full 65 watts in order to run the computer and charge the battery simultaneously.
    Did you replace your DC-in board yourself? Has it ever worked since the DC-in board was replaced? Are you sure you got it plugged in properly?
    Yours is acting exactly the way my husband's did when his DC-in board needed to be replaced. That is, it would work from a fully charged battery, but would not charge the battery. A DC-in board replacement was the fix for his, and sounds like that would be the fix for yours, too. If you did it yourself before, maybe you need to either try it again (you could have received another bad one), or send it off to have someone else do it.
    Good luck.

  • Another one of those battery problems...so scared

    Hey all,
    I know that many people are posting battery problems and I think I have a similar one...I just don't know if apple will listen to me. My 15" mbp shuts down at around 45% charge for no reason. I applied the update that apple provided but to no avail.
    Unfortunately, here are my stats:
    Battery Installed: Yes
    First low level warning: No
    Full Charge Capacity (mAh): 3824
    Remaining Capacity (mAh): 3824
    Amperage (mA): 239
    Voltage (mV): 12604
    Cycle Count: 529
    It seems i have decent capacity but the cycle count indicates that the battery is old (about 13 months). So what do you guys think? Do I have a chance of getting a free replacement with the protection plan? If there is a possibility, what tactic should I use-you know- call apple, mac genius, what should I tell them. The problem has been bothering me for a while and it seems to be getting worse.
    If I probably won't get the replacement, can someone recommed some good alternatives you found to the default batteries, preferably those with a greater capacity/battery life. Keep in mind, I'm a college student so any money I can save would mean a good month's worth of food that isn't crackers and ramen.
    thanks,
    any reply would be greatly appreciated.

    Unfortunately, I really doubt Apple will give you a free replacement battery. Apple specifies that a battery should maintain 80% of it's original full charge capacity for 300 cycles. As you point out, you have 529 cycles on your battery - it's had a good life! But Apple will tell you (correctly) that batteries do wear out, and that's what is happening to yours.
    So, you either need to live with the poor run time that comes with an elderly battery, or purchase a new one. It's just one of the extra costs of ownership, like buying gas for your car.
    If you check on Google, there may be slightly less expensive 3rd party batteries out there. If you go that route, given the problems many people have had with these batteries (which Apple has acknowledged), be sure you trust the vendors warranty. Else, you may be better off just buying direct from Apple.
    Wish I had better news, but I hope this at least sets your mind at ease a bit...(except for the $ part, of course...).

  • Flashing icon - battery problems? Something else?

    Hopefully I have, at last, found the right forum...My lime clamshell iBook, running system 9.2.2, froze yesterday, and when I restarted, a flashing folder with a ?, switching with a folder with the Mac two-facing-profiles symbol, was on the screen. I have never had this symbol ever.
    I found my hardware test disk and tested the system -- no probs. But the flashing folder remained whenever I restarted.
    Over on the OS 9 board, there is a discussion about this flashing icon previous to my crisis today, and the group said an internal battery is the problem. I asked exactly what model I needed for my old iBook (I'm in Germany, and the Mac store here needs exact names and numbers for anything to do with my old system). I was told "Your lime iBook ca. 2000 machine has the Apple designation of iBook (Firewire). That model, like all iBook models, does not have a separate backup (internal) battery such as some PowerBook models and all desktop models have. The only battery the iBook models have is the main battery." A poster suggested I head over here on this branch of the forum and seek advice. But I posted to the wrong portion of this branch so, hopefully, this is the right one.
    Someone on the other branch said something about resetting something... but if I can't turn the computer on (past the flashing icon), then how can I reset anything?
    I JUST replaced this battery, not a year ago. But about six months ago, it started losing all power after just an hour or so, and I would have to reset the clock, etc. when the power just suddenly ended when my computer was unplugged. Now, I can't unplug my computer at all except for a few minutes, otherwise, the batter just quits suddenly, poof. I put the old battery back in today, but it didn't help.

    I'm not sure what you are reading but it doesn't sound like a battery problem. It sounds like the iBook can't find a valid system folder to start from.
    In KB 58042, A flashing question mark appears when you start your Mac under "Steps for Mac OS 8 and Mac OS 9" you will find the following:
    The possible causes and solutions for this symptom appear in the order that you should try them. If any step resolves the issue, you don't need to continue to the next one. If at any time in this process you determine that your System Folder or its contents are missing or were intentionally deleted, reinstall Mac OS 8 or Mac OS 9.
    If you normally start up from Mac OS 9 but don't have a Mac OS 9 CD that can be used as a startup disk, follow the steps for Mac OS X above. Some computers include Mac OS X Installation CDs and a Mac OS 9 Restore CD that can't be used as a startup disk. Once you've started up from Mac OS X, make sure a copy of Mac OS 9 is installed. If you erased your disk since the last time you started up in Mac OS 9, you may need to need to install Mac OS 9 drivers.
    Start the computer from the Mac OS 8 or Mac OS 9 Installation or Restore CD that came with the computer.
    Open the Utilities folder and locate Disk First Aid.
    Open Disk First Aid and repair the disk.
    Open the Startup Disk control panel.
    Choose your hard disk as the startup disk.
    Restart the computer.
    Note: If your hard disk is not available (mounted) when started up from CD, reset the PRAM as described below, then repeat these steps. If your hard disk is still not available after resetting PRAM, contact an Apple Authorized Service Provider or Apple Technical Support.
    If you can't choose your hard disk in the Startup Disk control panel, your System Folder may have been altered or removed. In some cases, you may solve the issue by moving files back into the correct location in a process known as "reblessing" the System Folder. A "blessed" System Folder is one that is recognized as a valid startup System Folder, as indicated by the appearance of the Mac OS logo badge on the System Folder.
    Reblessing the System Folder only works when all the original files are still installed and in the correct location (or you can put them back in the correct location). If any files have been deleted, you may need to reinstall system software. If you have deliberately removed System Folder files, this includes putting them back where you found them.
    Additionally, you should only have one folder named "System Folder" on your disk (not to be confused with the folder named simply "System" that is installed by Mac OS X, if both systems are installed on the same disk).
    To rebless your System Folder:
    Start up from CD.
    Close any open windows.
    Open the hard disk.
    Choose By Name from the View menu.
    Locate the System Folder. Tip: You should only have one System Folder. If necessary, rename any other "System Folder" you're not using. Don't rename "System" if Mac OS X is also installed.
    Open the System Folder. At this time, you should replace any items that you have previously removed from the System Folder, if applicable.
    Do one of the following:
    ->If Mac OS X is not installed or is installed on a different volume than Mac OS 9, drag the System suitcase and the Finder to your hard disk icon. If you have more than one hard disk, drag the files to the hard disk where the System Folder is.
    ->If Mac OS X is installed on the same volume or partition as Mac OS 9, create a new folder outside of the System Folder but on the same disk, then drag the System suitcase and the Finder to the new folder.
    Close the System Folder.
    Drag the System suitcase and Finder back onto the System Folder icon.
    When the Mac OS logo reappears over the System Folder, it has been reblessed. Select the folder in the Startup Disk control panel, then restart the computer.

  • Battery Problems with MacBook

    I've been following the various threads about battery problems with MacBooks.
    I too have experienced a problem with my battery on a 2 month old MacBook.
    It suddenly refused to charge. It showed a battery icon with a black X through it.
    I followed various suggestions that I found through various posts and support pages - eg. resetting PMU etc., even downloading the deep sleep widget which I found difficult to get to work - but nothing solved the problem.
    Yesterday I went in to the Apple Store in Birmingham and waited until I could talk with one of the tec experts (incidentally, they were very helpful even though very busy and I didn't have an appointment). The tec guy said he though that the battery was faulty. It didn't work in another MacBook they had. But another battery would work in my MacBook. So, I was given a new battery, which seems to work fine now.
    However, I have read in various posts that people have had the same new battery solution which works, but then the problem reappears with the new battery over time. I will wait and see. If that is the case, then I think it will point to the problem not being with the battery, but rather with the system, PMU, OS X, motherboard or whatever. So, I think it makes sense for us to post any difficulties we have so that Apple can see that there might be a problem with the batteries in MacBooks and start working on a solution. Otherwise, it will probably cost them a lost of money providing replacement batteries !
    Intel iMac 24 inch (size matters...!) & Intel MacBook   Mac OS X (10.4.8)  
    Intel iMac 24 inch (size matters...!) & Intel MacBook   Mac OS X (10.4.8)  
    Intel iMac 24 inch (size matters...!) & Intel MacBook   Mac OS X (10.4.8)  

    Hey Christopher...
    I posted the same in another thread. I'm not a big fan of duplicate posts... but it seemed appropriate in this case. Take a look at the last paragraph regarding discharging lithium ion batteries. I'm not sure if it would be the electronics in the battery that tell the MacBook it's time to charge, or the MacBook's power management unit...
    "Talk about a jinx! I've had my MacBook since shortly after they came out (week 9). Never had any problems. I've calibrated my battery about once a month or so. It seems after my last calibration, I got the dreaded "X" in the battery indicator. My MagSafe indicator was green. System Profiler showed that there was no battery. I reset the PMU and the SMC firmware... also tried reseating the battery (one of those things you're sure won't work... but ya just have that little bit of hope anyway). Alas, nothing would bring my battery back. Took a trip to my local Apple store. I had made an appointment online, but still had to wait over an hour (they really need to enlarge their Genius area now that they have so many more machines out there). Told the Genius what the problem was... he swapped out the battery... but the one he tried was fully charged because he took it from a machine that was plugged in. So the tension was mounting... would it charge or not (I was hoping it was just the battery and not something else). He had me use my MacBook for a bit to drain the battery. I ran Parallels and did a Windows virus scan (that should drain the battery pretty fast)... After I got the battery down to about 90%, the Genius plugged it back in. To my delight, the MagSafe indicator went orange and started to charge the battery. With that, the Genius went in the back and got me a new battery. He had me stay there for a little bit just to make sure everything was okay. I'm sort of afraid to calibrate my battery now... at least properly as in letting it completely drain. I had done a few calibrations in the past without a problem, but it seems this problem tends to occur after someone does a calibration. I'm just happy it was just the battery.
    I came across this little tidbit from the Battery University webiste:
    Some lithium-ion batteries fail due to excessive low discharge. If discharged below 2.5 volts per cell, the internal safety circuit opens and the battery appears dead. A charge with the original charger is no longer possible. Some battery analyzers (Cadex) feature a boost function that reactivates the protection circuit of a failed battery and enables a recharge. However, if the cell voltage has fallen below 1.5V/cell and has remained in that state for a few months, a recharge should be avoided because of safety concerns. To prevent failure, never store the battery fully discharged. Apply some charge before storage, and then charge fully before use.
    I wonder if there is a fault with some of the batteries that is allowing them to discharge below this minimal level, making them impossible to recover."

  • Reception / Battery problems with iPhone 3GS after upgrading to iOS 4.2.1

    There are major reception and battery problems with iPhone 3GS after upgrading to iOS 4.2.1.
    I can not believe that Apple did not test this for major bugs like this one is.
    I am a business user and can not effort to have bad reception. Apple wants to gain in the business clients... I never had this with my former BlackBerrys!
    I need a reliable phone not a play thing like this is right now, it just needs it to work propely. And if a major bug like this comes along, fix it immediately. After the iPhone4 story, now this...incredible! Going back to my reliable BlackBerry! It just ain't reliable and takes forever to fix a problem.

    I have the same issue after iOS 4.2.1 update. I am using iPhone 3GS officially unlocked by Apple. I tried using different SIM cards and both carriers show same problem when using phone in 3G mode. Phone falls back to EDGE mode showing 'E' from '3G' at start. I have reset the phone and rebooted several times and moved to different cell areas in the city just to verify the problem.
    I had no such issues earlier. I also have Nokia E71 which shows full signal and has no such issues.
    I have posted the bug on apple iphone feedback page. I hope they Apple will fix the problem and test the release properly on all models before releasing to public.

  • ThinkPad Edge 13" sudden BATTERY problem

    Hi, i am starting to be desperate, therefore i registered myself here. Let me explain my story.
    My computer is now almost 2 years old and I have less than 14 days till the warranty expires (I am from Europe), but I'd like to avaid this, because i really need my computer now, not after 30 days, which is by law designated time till which it must be returned to me back. I did not have to use my computer outside home for about 3 month, so I was using that during that period as desktop computer, where i set in lenovo power manager, that all energy should be taken from the AC adaptor letting the battery to deplete itself in its own pace. But i have taken my computer to the libraries lately and i have experienced sudden battery problems. Let me describe them in order as it happened.
    1) battery shows that that it has more than lets say 20% of power, but windows power manager warns me that battery capacity is in reality 6% and i need to use my AC adaptor now. after second even lenovo power manager recognize the fact that battery is almost depleted. first i did not pay attention, i thought it was some temporary bug and it will not be repeated again.
    2) unfortunatelly it was, therefore i updated lenovo power manager to current version (6.11), which realized that current battery capacity was not 54Wh (as before update), but 47Wh. Therefore I resetted battery gauge statting that battery capacity is now slightly over 51Wh. For couple of days everything was as it should (probably, because i always connected AC adaptor around 10% of remaining battery).
    3) now my problem appeared again, though battery depleted naturally and slowly to 10%, after that windows power manager popped again showing, that battery is 6% and I need to use my AC adaptor. after connecting to electricity whole W7 froze for a while. I rather restarted system after which I realized, that battery info is wrong again - original capacity of battery since i have this laptop was over 62Wh, now is slightly over 57Wh (this is something new i have not realized this 2 days ago, when i was doing the reset, and I'd bet i happened just now) and current battery capacity rose back to 54Wh (as I said before, after the last reset it was just 51Wh).
    I attemted to do Battery test through Toolbox, but system refuse to run this test (even after resterting system) stating "Cannot run".
    For a while i thought i have this problem which requires updating battery firmware: http://support.lenovo.com/en_US/diagnose-and-fix/detail.page?DocID=HT003431
    but FRU number of my laptop is 42T4813 and is not in the list of batteries requireing update.
    Sorry for long text, and quality of English (I am not native speaker), any help is welcome. Thank you in advance.
    PS: i always install updates throught System update, my BIOS should be therefore up to date, i also Lenovo Power manager does not offer any update for battery firmware.

    After todays restart original baterry capacity is restored back to 62+Wh, But current capacity is still 54Wh, higher than after last battery reset. I am upgrading to higher version of Power Manager.

  • IPod Battery Problems.. Send in for a replacement?

    My iPod is just over a month and a half old. I use it very often. The battery lately takes about 12 to 14 hours to fully charge. Once I get a full charge into the battery, the battery lasts about 10mins, even though I don't play games or scroll alot.. Is there a battery problem here? should I send it in for a replacement? Also, when I get a replacement iPod.. Is it possible to request that my new ipod be a different colour? (I hate my pink iPod)

    welcome!
    1) if your ipod is under warranty, then you should send it in for service/replacement
    2) as for requesting a different color... I would doubt it, but who knows....
    http://depot.info.apple.com/ipod/

  • 13" MBP Mid 09 Battery problems with snow leopard

    Last night i decided to upgrade my wifes 09 macbook from the stock 160GB harddisk to an Intel 320 series HDD.
    I had gotten the Snow Leopard upgrade when i bought the mac in 09, but never bothered to install it. (Leopard worked just fine for my wifes non sophistcated needs)
    So I did a timemachine backup, swapped out the HDD for the SSD and installed 10.6
    Prior to the update, the battery would hold a charge perfectly well, and charge like it should.  As soon as i booted 10.6 I noticed the battery status said not charging and the indicator light on the charger wasnt on.
    I reset the PRAM, then the SMC, did all my updates, and nothing changed. Still no charge.
    So I reswapped out the HDD back in to the macbook,  As soon as i booted it, it said calculating charge time, 20 seconds later, it was charging.
    The battery in 10.5 and 10.6 report OK health, with 260 or so cycles. The battery problems are ONLY in 10.6.
    HELP!

    Try reinstalling Snow Leopard:
    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.

Maybe you are looking for

  • How can I display all album art of my library in iTunes

    All my music tracks in my library contain the respective album art within their ID3-tags and it is perfectly displayed in the lower left corner window when I select or play a track. What I really would like to do is to browse through my library using

  • Remote Key Mapping - Maintanance

    Hi All, I have Auto Id field in my repository; I would like to maintain this as my remote key value in my key mapping table ( automatically) in the following scenarios: 1. Initial Loading 2. On going ( from portal) 3. Manual creating a record The iss

  • Attributes in Mail Forms

    Hi All, How can I make available attributes of other objects in mail form templates. example: billing details, payment details etc. Thanks, Raj.

  • BDC FOR F-58 - BKPF-BLART NOT FOUND ON DYNPRO

    Hi everyone, I am doing the bdc for tcode F-58 based on the parameters given by SM35. When I run it with the program, it suddenly stops showing the error message, "Field BKPF-BLART not found on dynpro sapmf05a 0129". I need to set the bkpf-blart fiel

  • Is it mandatory to Restart all services after making Business Rule change?

    Hi, I know it may be a easy one but wanted to know is it mandatory to restart all the Planning and Essbase services if we make any changes in the Business rule in 9.3.1 -KP