Possible bug found in jndi

hi @ all,
i'm using jdk 1.5.0_04 which includes jndi already.
i figured out, that when i set the propertyjava.naming.ldap.version to a hashtable which i parse toInitialLdapContext as the environment jndi does not recognizes it. I took a look to the sources and foud that the ldap version is set fix at the constructor AFTER the environmental hashtable has been copied to the internal data.
is it possible that this is a bug or is there something i'm missing to know?
can someone answer this question?
greez
dialsc

wrong category

Similar Messages

Possible bug found in Mac Os X Tiger 10.4.11 in conjuction with iPod Touch

Dears,
I think I've found a possible bug in Mac Os X version 10.4.11 in conjunction with iPod Touch.
When the iPod is connected during boot, my Bluetooth hardware fails to be detected. When I restart the portable without the iPod connected, my Bluetooth hardware is recognised & activated again. It is reproduceable.
1. Attach iPod Touch before starting the MacBook Pro
2. Boot the Macbook
3. Bluetooth hardware should be rendered inoperative
Restore functionality:
1. Detach the iPod Touch
2. Reboot the portable
3. Bluetooth hardware is restarted / recognised.
Regards
Cedric

wrong category

VSphere Port Mirror - Possible Bug Found

Hi,
Something i came across to and thought could be worth while reporting it since i havent seen any reference to it elsewhere:
We've configured a few "source remote port mirror rules" for a few VMs, in a way that each VM had 3 vNics that were mirrored.
long story shot: one VM had one vNic that was E1000 and not VMXNET3 like all the others, each time i enabled the "source remote port mirror" rule for the E1000 vNic, all other port mirrors (from this VM and other VMs located on the same ESX) stopped working. problem was solved after i removed the vNic and created a new one, this time a VMXNET3 vNic.
didnt see any reference about E1000/VMXNET3 regarding vSphere Port Mirroring. New bug maybe?

Hi,
Something i came across to and thought could be worth while reporting it since i havent seen any reference to it elsewhere:
We've configured a few "source remote port mirror rules" for a few VMs, in a way that each VM had 3 vNics that were mirrored.
long story shot: one VM had one vNic that was E1000 and not VMXNET3 like all the others, each time i enabled the "source remote port mirror" rule for the E1000 vNic, all other port mirrors (from this VM and other VMs located on the same ESX) stopped working. problem was solved after i removed the vNic and created a new one, this time a VMXNET3 vNic.
didnt see any reference about E1000/VMXNET3 regarding vSphere Port Mirroring. New bug maybe?

Possible bug found+features request

While the fact Playbook has original pdf reader from Adobe makes me happy, the discovery of the feature-less program cooled very quickly my initial enthusiasm...
The reader crashes randomly when trying to navigate through larger files: 50+pages. Sometimes it takes just a flip of a couple pages to find myself dropped back to Playbook homescreen, sometimes just a bit longer. Without the proper navigation options it is plain PITA to try and find the last page before the crash.
Further on, please add the options to manually control the rotation of the pages. I'm finding myself often turning my head instead as the playbook will rotate the pages which are saved sideways.
Looking forward for update.
Thanks

wrong category

Bug Found and Fix Found Creative ZEN XFI Style 32 Gig

9Bug Found and Fix Found> Creative ZEN XFI Style 32 Gig?Hello I was having problems getting my MP3 TAGS to show up on a number of my MP3's.
Whenever I loaded my files onto my ZEN it would show up as a Voice under Recordings.
And the file name would be "MIC and the date file created etc..."
I noticed that these files where all starting with the letters MIC at the front of the filename...
For instance: Michael_Jackson_Thriller.mp3?? or? Michael_W_Smith_Let_it_rain.mp3
and so on and so on... ANY file that started with the letters M I C? would be thrown in as a voice recorded file and the TAG would not operate.
I have the latest Firmware on my MP3 Player.
The fix was just to change the file name so it did not start with MIC... so i went and switched Michael Jackson to M.Jackson and also switched Michael W Smith to M W smith.
The tag showed up appropriately and I have had no problems since.
It would be nice if there was another Firmware update so that MP3's could start with the letters MIC also I was hoping to bring awareness to this situation for other users.

=Re: Bug Found and Fix Found> Creative ZEN XFI Style 32 Gig?I did three methods of?loading the files.
I used Windows Media Player to sync the files.
I used Creative Central to transfer the files.
These two methods produced results where the file starting with MIC turned into a voice recordings.
I also had problems just copying and pasting the files (using windows explorer).
I have not had any problems with any other file. I normally use MP3Tag to tag my files.
However i even tried using Windows Media to tag the file and I even tried using Creative Central to tag the files.
I tried as many work arounds as possible. But once i renamed the file it worked.

Possible Bug with Drag-and-Drop Being Published via HTML5 - Getting "Undefined" Error When Dragging Object

Hello,
I came up with a way to use drag-and-drop interactions that will take advantage of file input so that I may create a drag-and-drop interaction that uses one draggable object over and over allowing multiple scoring/tracking possibilities. Example use...is having the draggable object be dynamic in that it randomly changes its text so that a learner can drag a term it's possible classification.........thus allowing the possibility of having many terms easily loaded without having to redo a drag-and-drop interaction for each needed terms/classifications updates/changes.
My Issue: When using a variable to represent the text for a draggable Smart Shape object, I'm getting the error message "undefined" when, clicking/pressing on the object, as well as during the drag of the object. This issue occurs when publishing the project in an HTML5 format. Flash interestingly enough seems to work perfect...but we are not interested in publishing via Flash any longer.
To better help you explore this error message, I've set up a test project so that you can see when and how the "undefined" message shows up during a drag-and-drop interaction. I've also included the Captivate 8 project file used to make the exploration project I'm sharing in this post.
Link to Captivate project I created for you all to explore "undefined" error message": http://iti.cscc.edu/drag_and_drop_bug/
Link to this Captivate 8 Project file: http://iti.cscc.edu/drag_and_drop_bug.cptx
It's pretty interesting how things react in this demo, please try the following actions to see some interesting happenings:
Drag the Yellow (or variable drag box) to the drag target.
Drag Black Hello square to Drag target and click undo or reset - watch the undefined message come up on the Yellow (or variable drag box).
Drag the Yellow (or variable drag box) to the drag target and then use the undo or reset.
Move both draggable boxes to the drag target and use the undo and reset buttons...
Anyhow, I know you all are sharp and will run the demo through its paces.
I'd really be very honored if anyone help me figure out how I could (when publishing out to HTML5) no longer have the "undefined" error message show up when using drag-and-drop with a variable for shape text. This technique has been well received at the college I work at...and I have many future project requests for using such an idea on a variety of similar interactions. I'd love see a solution or see if this might be a bug Adobe may be able to fix!
I tried to find a solution to the issue documented here for quite some time, but I was not able to find anyone with this problem much less attempting the idea I'm sharing in the help request - save the darn "undefined" message that comes up!
Many thanks in advance for any help and/or direction that you all may be able to provide,
Paul

Hello,
I just wanted to supply a minor update related to my drag-and-drop question/issue stated above:
I did another test using Captivate 7, and found that the undefined error (publishing as HTML5) does not appear and the variable data remains visible - except the variable data turns very small and does not honor any font size related settings.
I did go ahead and submit this to Adobe as a possible bug today.
Thanks again for any help related to this issue. If the issued documented above is solved, it will allow many amazing things to be done using Captivate's drag-and-drop for both regular type projects as well as interaction development for iBooks!
Matter of fact if this issue gets fixed, I'll publish a Blog entry (or video) on way's I've used Captivate's drag-and-drop to create dynamic learning activities for Higher Ed. and for use in iBooks.
~ Paul

Possible bug? formatted number 0 displays as 4,294,967,295

This is really two questions in one. First, I have a routine
that sometimes provides a result of 0, which is *sometimes*
displayed in an AdvancedDataGrid column as 4,294,967,295, which I'm
assuming is somehow a meaningful number (largest int?). Anyway, I
have an ADG with a column defined as:
<mx:AdvancedDataGridColumn headerText="Remaining work"
labelFunction="rem_work_fmt" textAlign="right" />
The labelFunction called is shown below:
private function rem_work_fmt(item:Object,
column:AdvancedDataGridColumn):String
var num:String =
numberFormatter.format(item.get_remaining_work());
trace ("result: " + num);
return num;
The trace output prints: "result: 0" as expected, but the
number displayed in the grid is sometimes 0 and sometimes
4,294,967,295.
More weirdness, this only happens to the last column in the
ADG. I call the same format logic on a different column and have
never seen the wrong result. Also, the same underlying function
"get_remaining_work()" is called elsewhere on the same data and the
result is correctly displayed in a text field as 0.
Second question, I've run into some other possible bugs,
which I haven't reported because I found a work around. How does
one do that in the beta program?

lw1001,
Bugs can be filed in the public bug base at
http://bugs.adobe.com/flex/
You'll need to sign up before you can submit bugs.
Also, if you can attach the bug files to the bug report, it
makes it a lot easier for Adobe to investigate.
Let me know if you have any further questions/problems.
Peter

A possible *bug* in java jcombobox

Hi all,
I think i found a possible bug in java jcombobox .. i am sure some of you must have already experienced it..
supposedly you put a jcombobox in a jpanel
returned the panel from a method to a calling method..
and that method adds it to another panel that it had created to a frame..
and if this happens dynamicaly at runtime, as only after u click a button..
meaning : without adding the combobox or the immediate parent panelto the contentpane .. directly..
Then,
your combox's keylistener may not catch events fired.
.. this has happened to me many times.. and always i could only find a way out
.. by adding the combobox to panel that is loaded during startup itself and is
.. not returned through a method call.
Your opinions please ?
'Harish.

All components in a UI are created at run-time.
When you create your JFrame you call pack() to align and resize the UI. This validates all the components, and sets the default focus on what ever component should have the focus at start up.
When you create components and add them as children of another component you have to validate the child and parent. This can be done by calling JComponent.validate()
As for keylisteners not getting called, this might be fixed if you call grabFocus on the new combobox. I can't see a reason why any listener would stop working.
For me to really understand what your talking about. I'd need to see source code reproducing this problem.

Are you aware of a possible bug in version 3.6.23? In the browser, for example, "two/" appears with the slash through the "o". Is this a known bug?

Are you aware of a possible bug in version 3.6.23? In the browser, for example, "two/" appears with the slash through the "o". Is this a known bug?
When the same text is view in another browsers it appears correctly as "two/".
I've checked, and the same problem appears in Firefox on another computer.
The two answers received so far have not provided an answer: is this a known bug in Firefox?
Thank you.

You are on a Mac and that is a [http://en.wikipedia.org/wiki/Kerning kerning] problem. Don't you see the same problem in other applications if you choose the same font, font-weight and font-size.
I only find one other kerning [https://support.mozilla.com/questions/789254 question] here -- it is marked unsolved. I find it strange that Firefox got involved with this at all rather than leaving such things to the operating system and font metrics.
Does the problem go away with "command+0" (zero) which resets [http://kb.mozillazine.org/Zoom_text_of_web_pages zoom level] to normal. If you mess with the font sizes in your preferences because you want larger print that would have the same effect.
Also found this one recently reported for [https://support.mozilla.com/questions/892222 Firefox 7 in ubuntu 11.04] which appears much worse. If it involves Firefox and specific operating systems it becomes a lot harder to diagnose who or what is responsible.

Possible bug with iTunes 11 ?? (with Smart Playlists)

Hi folks
New to Apple Support, but after upgrading to iTunes 11 earlier today (on my Mac Mini) I've discovered a potential bug / difference in the way it operates compared to earlier versions. Can someone else try something similar and see if they get the same result - I think I read somewhere that v11 is not available on Windows yet, so I cant compare what happens there
I've imported all our CD's into iTunes, and we've set up several Smart Playlists (SP). Using the Rating setting for the songs, we can break them up into groups, eg
Rating 0 = not yet processed
Rating 1 = not interested in listening to again
Rating 2 = kids songs (for our children)
Rating 3 = christmas songs
Rating 4 = songs i like, but my wife probably wouldnt
Rating 5 = songs we both like - good for background music etc
Using Home Sharing to our iPad's rocks !!
Now, onto the bug.
Using the SP that has just songs with Rating 0, I could play any song, set the Rating to whatever, and naturally once set, that disappears from the SP
In all earlier versions of iTunes, playback would continue with the next song, so I could set that Rating, etc etc. Worked really well to churn through a chunk of songs in say 15 minute blocks
With iTunes v11, playback stops as soon as I set the Rating.
How can you help ?????????? Set up a smart playlist with whatever criteria you like - make sure you have a number of songs returned and ensure Live Updating is set, have a song playing, and make that song no longer valid for that SP. Anyone doing this in earlier versions of iTunes should have the next song begin, and if this is a bug, then those using iTunes 11 will have playback stop
Sorry for the long post, but in order to determine a potential bug, you need to describe the situation and how to test it.
Thanks for reading
PS I'm on a 2010 Mac Mini with OSX v10.7.x (whatever the current release of that is) and just upgraded to iTunes 11

Soo, maybe it isnt possible bug, but the way Apple have changed iTunes when going to v11. Stooopid
Anyway, found this link about downgrading to an earlier version. I've just completed it and found one or two "errors" in the method, which I'll detail below
http://www.emacconsulting.com/apple/itunes/downgrade-itunes-11-to-itunes-10-7/
In the latter part of the instructions
11) Open your iTunes Music Folder.
If you never moved your iTunes folder it’s located here:
Your HD/Your User/Music/iTunes
Or go to the Finder type: Command + Shift + G
Paste this into the the dialog: ~/Music/iTunes
If you moved it to another hard drive, you will know where to locate your iTunes folder.
12) Open the “Previous iTunes Libraries” folder.
13) Find the most recent copy of the “iTunes Library 2012-xx-xx.itl” file.
Normally it will the last file at the bottom of the list.
14) Drag a copy of the file into the iTunes folder.
15) Delete the “iTunes Library” file.
16) Change the name of the “iTunes Library 2012-xx-xx.itl” to ”iTunes Library” with no .itl extension.
In #11, I simply went to "My HD"/Users/"My User"/Music/iTunes
Copied the latest .itl and moved it up a directory level
The old file in #15 is called "iTunes Library.itl" - which I renamed, and renamed the copied version back to "iTunes Library.itl" = though I do have extensions showing, some people may not and hence wont see the .itl
Anyway all is fixed in my world, and when I launched v10.7, it asked me if I wanted to upgrade to v11 - I said No and not to prompt me again. Playcount issue is resulved, as is changing SmartList criteria with playback continuing
Apple - please correct these bugs before releasing any new versions of iTunes... you've made a very large number of people unhappy

Possible Bug In Apex 4.0.2

Hi Everyone.
I would like to report what I think is a bug in Apex 4.0.2.
If you go to my workspace on apex.oracle.com:
Workspace = EEG
Username = [email protected]
Password = galaxy (all lowercase)
Run the application: 37796 - Elie_Various_Goodies [no credentials are required]
This app was imported from my 4.0.1 workspace at my job. On the page I created two Date Picker items, P1_BEGIN_DATE and P1_END_DATE. I set them up so that whenever a user selects a begin date, a dynamic action "MANAGE_DATES" fires and automatically sets P1_END_DATE to this selected begin date value. Now when a user goes to select an end date, the displayed calendar starts at the previously selected begin date rather than the default of "Today".
All of this worked fine on my office (4.0.1) workspace. However, after exporting this app and then importing onto apex.oracle.com, none of this functionality would work. Even worse, whenever I try to select a begin date or even an end date, the selected dates never make it into the date picker fields. Displaying the "Session" window shows these fields as empty.
It was only after I copied the two date picker fields and also re-created my dynamic action (P1_BEGIN_DATE2, P1_END_DATE2, MANAGE_DATES) did my functionality return.
This behavior is quite strange. I can only think this is some sort of bug attributed to the export/import process when exporting a 4.0.1 app into a 4.0.2 workspace. I am not sure if this bizarre behavior happens with non-date picker items. Nor am I sure if this beavior would be repeated if I export/import from 4.0.2 into the another 4.0.2 environment.
Another strange thing I noticed. If I change my date picker items to be "date picker (classic)" type items, the dynamic action does not work at all. This is true in both 4.0.2 and 4.0.1. I'm not sure if this a bug or not. It could be that the classic date picker is just not "javascript" enabled so to speak. If that is true, then it would have been nice if the docs would have warned us about this.
Has anyone else seen this behavior?
Thank you.
Elie

Hi Joel.
First let me thank you for the warning about allowing "everyone" access to my workspace.
You're correct, of course. Anyone could destroy anything within my workspace. I guess I was too trusting especially as I have seen many posts on the Forum where others have given access to their workspace so that responders can offer help. I really should be more discreet about this. Again, thank you. Needless to say, I have changed my password.
With respect to the possible bug, the MANAGE_DATES dynamic action is intended to be a submit page because that is the only way I can see to get BOTH the P1_END_DATE date picker item as well as the end date textual field to be assigned the selected P1_BEGIN_DATE. I tried to use a dynamic action in which javascript sets the value of the end date textual field to the selected P1_BEGIN_DATE value. This works without the need to submit the page. Unfortunately, this does not cause the P1_END_DATE date picker item to default to this value. Instead, the default remains at today's date. This is why I finally resorted to a dynamic action that submits the page whenever a new value is selected (that is, a "change" event) from the P1_BEGIN_DATE date picker item.
All of this works in my office 4.0.1 environment. However, I was puzzled when this fails under 4.0.2 on the hosted web site at apex.oracle.com. This is why I posted a "possible" bug in 4.0.2.
I hope this all makes sense.
One more thing, as already mentioned in my original post, this "defaulting a date picker" functionality does NOT work at all for the "classic" date picker items in both 4.0.1 nor in 4.0.2. I realize one can implement this functionality (I' guessing) my using, say, a "onChange" javascript call to submit the page. It's just funny that the "classic" date picker items are not acted upon by the dynamic action MANAGE_DATES that submits the page.
Thank you.
Elie

Possible bug: Saving array with extended and double precision to spreadsheet

If one concatenates a double precision array and an extended precision array with the "build array" vi and then saves using "Write to Spreadsheet File" vi any digits to the right of the decimal place are set to zero in the saved file. This happens regardless of the format signifier input (e.g. %.10f) to the "Write to Spreadsheet File" vi.
I am on Vista Ultimate 32 bit and labview 9.0
This is a possible bug that is easily circumvented by converting to one type before combining arrar to a spreadsheet. Nonetheless, it is a bug and it cost me some time.
Solved!
Go to Solution.
Attachments:
Spreadsheet save bug.vi ‏9 KB

Hi JL,
no, it's not a bug - it's a feature
Well, if you would look more closely you would recognize the "Save to Spreadsheet" as polymorphic VI. As this polymorphic VI doesn't support EXT numbers internally (it only supports DBL, I64 and String) LabVIEW chooses the instance with most accuracy: I64 (I64 has 64 bits precision, DBL only 53...). So your options are:
- set the instance to use as DBL (by right-click and "Select type...")
- make a copy of this VI, save it with a different name and make it support EXT numbers (don't rework the polymorphic VI as you would break compatibility with other LV installations or future revisions)
And yes, those coercion dots always signal some conversions - you should atleast check what's going on there...
Message Edited by GerdW on 05-21-2010 10:01 PM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Can someone confirm a possible bug with Universal Access?

Can someone confirm a possible bug with Universal Access?
I have a Mac Pro 3,1, 10.7.1 but if you could confirm or not this possible bug with any model.
In Energy Saver preference pane:
Set Mac to never sleep.
Set Display Sleep to ~2 minutes.
In Desktop & Screen Saver:
Set screen saver to start at ~1 minutes.
In Universal Access:
Check Enable access for assistive devices.
Check radio button Zoom to On.
Zoom in window not checked.
Confirm that Zoom works by pressing:
⌥⌘= (option, command, =).
Set screen back to normal by pressing ⌥⌘-.
Let screen sleep after screen saver starts.
Wake screen and see if ⌥⌘= still works.
Thanks … Ken

Other than the time intervals (smallest Screen Saver kick-in is 3 minutes), it works fine for me - at least I can still zoom in/out after waking the display.
Tested on two different MacBook Pro models in 10.7.1

What are the changes / enhancements / or possible bugs in LR 5 Auto Tone

Can anyone explain what, if any, changes, enhancements, or possible bugs were introduced in the functionality of Auto Tone since LR ver. 5.0. The reason I ask is that I get different results for the Exposure and Contrast adjustments when applying Auto Tone (using ver. 5.3) from the results (using ver.5.0) shown in the book "Adobe Photoshop Lightroom 5 CIB" in the "Using Quick Develop in the Library module" section, step 4 on page 37. (This difference in results between LR versions was confirmed by the authors of LR5CIB.)

I'm not sure about any new bugs but the radical exposure mis-calculations have been improved. I had photos that were over exposed to 5 (and even 10, believe it or not) that were exposed to a more appropriate 2 or so following the improvements (in Lr5.2 if memory serves). It's also less likely to radically underexpose.
Enjoy, (in my opinion, it's much better)
I think there may have even been further improvement in Lr5.3 but I can't swear to it - seems to preserve a little more contrast than in 5.2 - could be my imagination..
Rob

Bug Found: Illustrator CC *always* merges layers when opening a DXF file - CS6 works properly

Bug Found: Illustrator CC *always* merges layers when opening a DXF file - CS6 works properly. When opening a DXF, CC merges multiple layers into one, even if you have the "Merge Layers" unchecked. Can a forum admin employee get this submitted as a bug report? Thanks.

Thank you Larry. I just submitted this bug report pasted below at the link you provided.
******BUG******
Illustrator CC 17.0.0 *always* merges layers when opening a DXF file, even if you have the "Merge Layers" unchecked.
1. Open a DXF file that contain multiple layers in Illustrator CC 17.0.0
2. Uncheck the "Merge Layers" button.
3. Click OK.
Results: It has merge all the layers into one layer.
Expected results: It should open with multiple layers preserved. Illustrator CS6 works properly.

Possible bug found in jndi

Similar Messages

Maybe you are looking for