Possible Bug in "The Rules"

After logging-in through the firewall, regardless of whether I am logged into the forum or not, when I click on the link in;
"Welcome to Lenovo's Discussion Community - Please note The RULES when posting."
I get a log-in window requiring user name and PW. Closing the window brings an Authorisation failed message, using the FW PW everything is fine.
I know the rules are also in the Welcome forum, but I would hope most potential / new members will click on this link.
Andy
PS. This post has been marked as having URL and IMG, does the IMG come from the fact I copied and pasted the "Welcome" text?
Message Edited by andyP on 11-27-2007 04:45 PM
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Mark_Lenovo wrote:
I don't encounter this issue with the rules, but have from time to time in other areas. I expect this will cease to be an issue after Friday when the password protections are removed.
You may not encounter this as you have admin rights, if it doesn't dissapear after Friday I'm sure I, or another member who has experienced this, will let you know.
Mark_Lenovo wrote:As to your note above, the community management section heading was an error by applying permissions at the board vs category level. I believe it should now be resolved. Good catch - Thanks!
Yes, is resolved.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Similar Messages

Is this a possible bug on the Facebook app for iPhone?

I tend to suffer from slight paranoia regarding security online and on my phone. I'll try to explain the worry I'm having as best I can.
Basically, I had a personal video on my phone, (nothing horrible don't worry), but it's of a nature that would be embarrassing to be seen by other people.
So this video was the latest thing I had recorded/taken with my phone. I went onto the Facebook app on my iPhone to post an older picture I had to my page.
When I saw that this video was still on my phone, I panicked and worried that it could somehow get posted to my page without me actually posting it e.g. a bug whereby the last picture or video taken would go onto your Facebook without you actually selecting it or posting it. So I deleted it while still on the grid page where you choose your photos/videos and so it disappeared when I went back to the app.
Can anyone with 100% honesty tell me one way or another if this is possible? If I haven't explained it enough let me know and I'll explain it further. Again, please be honest cos it's the best thing for me. Thanks.

It may be in Facebook, but Facebook doesn't consider it a bug; it's the way Facebook works. If you gave the app permission to view your photos it gives Facebook access to ALL of your photos. To put your mind at ease go to your Facebook page on your computer and see if it's there.
If you are concerned about privacy online you probably shouldn't have a Facebook page

Is it possible to calibrate the ruler tool in centimeters?

I need to show specific ratios on the image, e.g., this distance is to this as that is to that. A measuring tool that works in pixels is pretty cumbersome. IS it possible to re-calibrate the ruler tool to measure in millimeters, centimetres, etc.? Pixels don't really make it for me. It seems like an obvious choice, but I can't figure out how to do it.

Thanks, guys. You were right. And thanks for coming up with it fast.

A possible bug in the Accordion scripts

I've encountered what may be a bug in the handling a single
apostrophe in the tab of an accordion panel. When I use '
in the tagged element content displayed in the accordion tab, the
character appears in the tab but any processing of the panels
stops. When I remove the ' everything is fine. When I swap
' for " (or any other special character) this
also works. So I'm thinking the single quote is affecting the
javascript somewhere along the line.
I'm using the 1.4 release of Spry.
BTW, all special characters in the panel content work just
fine. It seems to be only the tab that is affected when the content
there contains this single quote mark special character.
Unless I'm totally out to lunch or this is one of those magic
things that self-corrects the minute you ask someone a question
about it (I hate when that happens).
Thanks for any help you can give me.

Hi solsenkp,
I'm not seeing the problem. Can you post some sample markup?
--== Kin ==--

Is it possible to view the Rules data in Information Steward.

Hi Experts,
I'm working on Information Steward.Could you please guide me how to work on it.If i'm asking anything wrong correct me.
In our project (Data Cleansing) source system is MS-SQL Server.
when i create rules by using parameter,function and value in Data Insight .
1)In information steward we can view the table data.Coming part of the rules i'm not able to view the data.
2)when i click on score card setup icon here i can add Key Data Domains.It will display with yellow exclamantion mark.
Regards,
visu.

Hi Visu,
you need to calculate the score for your rules by creating a Rule Task (Calculate Score). The scores for your Tables, Columns or Rules can then be viewd in the Workspace Tab under the Rule Result panel.
These Rule Results are organized for technical focus: I am responsible for a tabel in my databasea nd want to know how good the data within the table is, or within a column...
The DQ Scorecard is a different concept where you can create a nice drill down scorecard based on a Key Data Domain that you can define. This is for example if you are a Data Steward within your company responsible for the Product Data and you want to get a quick entry point / visualization how good the product data within your company is. (This person might not be aware in how many differnt tables of a database relevant product related data is stored and needs to be assessed, he just wnats to see results for his Key Data domian / Data Entity / Business Object PRODUCT). So the DQ Scorecard is a separate cetup, where you define which Key Data Domain, which Data Quality Dimensions (that you have already assigned to your rules), which Rules (that you already have bound to your tables) and which Rule Bindings you want to pick form your basic score calcualition to be conolidated and propagated to the higher level score of your Key Data Domain. That's what you do, when you go to Scorecard Setup. If there is a Exclamation Mark on any level of the Scorecard Setup, it means that you have not added next level of detial in that chain.
Easy explanaition for why havign separate setup: You might want to defien a central ruel in your company to define valid salutations for persons (Mr. , Ms., unknown), bind them to the physical tables EMPLOYEE, SUPPLIER_CONTACT, CUSTOMER_CONTACT for getting the DQ SCore when setting up the Rule Tasks on the EMPLOYEE, CUSOTMER and SUPPLIER table.
--> gives you three individual scores, based on one single rule definition.
But you also want to get a DQ Scorecard for drill down based on the different data objects. So your Scorecard setup has three Key Data Domains: Employee, Supplier, Customer. You add Data Quailty Dimenson to the scorecard set up for each Key Data Domain (chooes the ones you have attched to your single validation rule for the salutation check) then for every Key Data Domain and its Quality Dimension you add at least the Salution Rule (or I expect you have much more rules like validating other fields) and for each and every Key Data Domain / Data Quality Dimension / Rule defined you add the according Rule Binding: To the EMPLOYEE table for the Key Data Domain Employee, etc...
All concepts are described in the Product tutorials and in the documentation.
Niels

Possible bug with the registration verification code, some follow up

About this post I made earily,
https://bbs.archlinux.org/viewtopic.php?id=187286
> I ran into this problem several times before.
I mean that I finally made a successful registration after dozens of trying
in the last two or three years time span.
I just don't know what went wrong, and never get around to search for the solution.
Luckily I figure it out today.
And I rushed in to report it, hoping it will be fixed,
And no more people will be put off by this again.
After some search, I see I am not alone:
"" List of titles:
Can not register in bbs.archlinux.org
Registration question
Arch Forum User Registration is Broken
[solved] Forum registration bug
Arch forum registration question
Forum account registration form problem
Problem Registering for Forum -> date -u +%W$(uname)
Forum registrations from Hawaii
Forum registering issues, again
Unable to register unless running linux
Forum registration question does not work if DST is enabled
It seams that Time Zone and DST are causing a bigger problem than it should be.
May be a not time-related Registration Captcha will server us better.

Scimmia wrote:If you have your timezones set up correctly, this shouldn't be an issue at all.
I don't know if it has been fixed, but when I tried to register 2 years ago, it continuously failed, even though I was quite sure I had entered everything correctly. On a whim, I decided to check the box that said daylight savings time is in effect. When I did that, my registration went through. So while "shouldn't be an issue" is technically true, it was an issue for me. I had to provide incorrect information in order to successfully register, and I only managed to do so by grasping at straws.
For the record, daylight savings time is never in effect in Hawaii.

Possible bug in the arch NFS server package?

i run the nfs server on my arch box, exporting to a debian box and an arch laptop. whenever the arch server reboots lately, the shares don't automatically remount properly on the clients. they're listed in mtab, but if i ls or try to access the directories, i get a permission denied error. i have to manually unmount the shares and then remount them again to be able to see/use them.
the reason i think this is an arch package problem is because i set up a share on the debian box to share with arch, and that worked perfectly. when i rebooted debian as the server, the shares were automatically remounted on the arch client, and when i rebooted arch, the shares were again mounted properly on reboot.
it's possible i'm doing something wrong with permissions, but it seems unlikely because 1) everything was working fine for a long time until recently, when i started noticing the behavior, 2) all the permissions on the shared directory are identical to the ones on the arch shared directory, all user name UIDs are the same, same groups and GIDs, etc., 3) the shares mount perfectly well manually from the command line, and 4) i set up the debian share/exports, etc. in about 2 minutes with no problem at all, while dealing with this problem on arch for 2 days now, after changing options and going over everything multiple times until my head is spinning. it just seems unlikely that a configuration is wrong, although i guess anything is possible. i can provide all that permissions/group info, fstab info, /etc/exports info, etc. if anyone wants to take a closer look at it.
so until this is sorted, i wondered if anyone else is having this problem, or if anyone had any ideas of something i might be overlooking. again, everything *seems* to be set up right, but maybe there's some arch specific thing i'm overlooking. thanks.

Ok out of pure fustration I just grabbed the gentoo init script. Installed start-stop-daemon, modified the script to run as #!/bin/bash, stuck it in /etc/rc.d, rebooted and everything works, I can reboot my computer and clients reconnect. Or restart daemon and they reconnect.
Heres the script I am using.
#!/bin/bash
# Copyright 1999-2005 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo-x86/net-fs/nfs-utils/files/nfs,v 1.14 2007/03/24 10:14:43 vapier Exp $
# This script starts/stops the following
# rpc.statd if necessary (also checked by init.d/nfsmount)
# rpc.rquotad if exists (from quota package)
# rpc.nfsd
# rpc.mountd
# NB: Config is in /etc/conf.d/nfs
opts="reload"
# This variable is used for controlling whether or not to run exportfs -ua;
# see stop() for more information
restarting=no
# The binary locations
exportfs=/usr/sbin/exportfs
gssd=/usr/sbin/rpc.gssd
idmapd=/usr/sbin/rpc.idmapd
mountd=/usr/sbin/rpc.mountd
nfsd=/usr/sbin/rpc.nfsd
rquotad=/usr/sbin/rpc.rquotad
statd=/usr/sbin/rpc.statd
svcgssd=/usr/sbin/rpc.svcgssd
mkdir_nfsdirs() {
local d
for d in /var/lib/nfs/{rpc_pipefs,v4recovery,v4root} ; do
[[ ! -d ${d} ]] && mkdir -p "${d}"
done
mount_pipefs() {
if grep -q rpc_pipefs /proc/filesystems ; then
if ! grep -q "rpc_pipefs /var/lib/nfs/rpc_pipefs" /proc/mounts ; then
mount -t rpc_pipefs rpc_pipefs /var/lib/nfs/rpc_pipefs
fi
fi
umount_pipefs() {
if [[ ${restarting} == "no" ]] ; then
if grep -q "rpc_pipefs /var/lib/nfs/rpc_pipefs" /proc/mounts ; then
umount /var/lib/nfs/rpc_pipefs
fi
fi
start_gssd() {
[[ ! -x ${gssd} || ! -x ${svcgssd} ]] && return 0
local ret1 ret2
${gssd} ${RPCGSSDDOPTS}
ret1=$?
${svcgssd} ${RPCSVCGSSDDOPTS}
ret2=$?
return $((${ret1} + ${ret2}))
stop_gssd() {
[[ ! -x ${gssd} || ! -x ${svcgssd} ]] && return 0
local ret
start-stop-daemon --stop --quiet --exec ${gssd}
ret1=$?
start-stop-daemon --stop --quiet --exec ${svcgssd}
ret2=$?
return $((${ret1} + ${ret2}))
start_idmapd() {
[[ ! -x ${idmapd} ]] && return 0
${idmapd} ${RPCIDMAPDOPTS}
stop_idmapd() {
[[ ! -x ${idmapd} ]] && return 0
local ret
start-stop-daemon --stop --quiet --exec ${idmapd}
ret=$?
umount_pipefs
return ${ret}
start_statd() {
# Don't start rpc.statd if already started by init.d/nfsmount
killall -0 rpc.statd &>/dev/null && return 0
start-stop-daemon --start --quiet --exec \
$statd -- $RPCSTATDOPTS 1>&2
stop_statd() {
# Don't stop rpc.statd if it's in use by init.d/nfsmount.
mount -t nfs | grep -q . && return 0
# Make sure it's actually running
killall -0 rpc.statd &>/dev/null || return 0
# Okay, all tests passed, stop rpc.statd
start-stop-daemon --stop --quiet --exec $statd 1>&2
waitfor_exportfs() {
local pid=$1
( sleep ${EXPORTFSTIMEOUT:-30}; kill -9 $pid &>/dev/null ) &
wait $1
case "$1" in
start)
# Make sure nfs support is loaded in the kernel #64709
if [[ -e /proc/modules ]] && ! grep -qs nfsd /proc/filesystems ; then
modprobe nfsd &> /dev/null
fi
# This is the new "kernel 2.6 way" to handle the exports file
if grep -qs nfsd /proc/filesystems ; then
if ! grep -qs "^nfsd[[:space:]]/proc/fs/nfsd[[:space:]]" /proc/mounts ; then
mount -t nfsd nfsd /proc/fs/nfsd
fi
fi
# now that nfsd is mounted inside /proc, we can safely start mountd later
mkdir_nfsdirs
mount_pipefs
start_idmapd
start_gssd
start_statd
# Exportfs likes to hang if networking isn't working.
# If that's the case, then try to kill it so the
# bootup process can continue.
if grep -q '^/' /etc/exports &>/dev/null; then
$exportfs -r 1>&2 &
waitfor_exportfs $!
fi
if [ -x $rquotad ]; then
start-stop-daemon --start --quiet --exec \
$rquotad -- $RPCRQUOTADOPTS 1>&2
fi
start-stop-daemon --start --quiet --exec \
$nfsd --name nfsd -- $RPCNFSDCOUNT 1>&2
# Start mountd
start-stop-daemon --start --quiet --exec \
$mountd -- $RPCMOUNTDOPTS 1>&2
stop)
# Don't check NFSSERVER variable since it might have changed,
# instead use --oknodo to smooth things over
start-stop-daemon --stop --quiet --oknodo \
--exec $mountd 1>&2
# nfsd sets its process name to [nfsd] so don't look for $nfsd
start-stop-daemon --stop --quiet --oknodo \
--name nfsd --user root --signal 2 1>&2
if [ -x $rquotad ]; then
start-stop-daemon --stop --quiet --oknodo \
--exec $rquotad 1>&2
fi
# When restarting the NFS server, running "exportfs -ua" probably
# isn't what the user wants. Running it causes all entries listed
# in xtab to be removed from the kernel export tables, and the
# xtab file is cleared. This effectively shuts down all NFS
# activity, leaving all clients holding stale NFS filehandles,
# *even* when the NFS server has restarted.
# That's what you would want if you were shutting down the NFS
# server for good, or for a long period of time, but not when the
# NFS server will be running again in short order. In this case,
# then "exportfs -r" will reread the xtab, and all the current
# clients will be able to resume NFS activity, *without* needing
# to umount/(re)mount the filesystem.
if [ "$restarting" = no ]; then
# Exportfs likes to hang if networking isn't working.
# If that's the case, then try to kill it so the
# shutdown process can continue.
$exportfs -ua 1>&2 &
waitfor_exportfs $!
fi
stop_statd
stop_gssd
stop_idmapd
umount_pipefs
reload)
# Exportfs likes to hang if networking isn't working.
# If that's the case, then try to kill it so the
# bootup process can continue.
$exportfs -r 1>&2 &
waitfor_exportfs $!
restart)
# See long comment in stop() regarding "restarting" and exportfs -ua
restarting=yes
svc_stop
svc_start
echo "usage: $0 {start|stop|restart}"
esac
exit 0

How to test the rule if multiline container is passing to the task?

Hi Experts,
                  I am working on leave workflow. I have to get the approvers based on no of days of leave and leave type. I am getting these details in ITEMS_TAB internal table. I am passing this table to a rule. Now my problem is when I tried to simulate the rule I am not getting any input screen to enter the data.
ITEMS_TAB is an internal table type of   "PTREQ_ITEMS_WF_TAB_FLAT".
In the rule I have created a container by selecting the radiobutton "ABAP Dict. Data Type" and entered the above reference parameter is it right way?
Is it possible to test the rule independently if I use multiline container as import parameter in my rule? If so can anybody please tell me how to test the rule?
Thank You.
Srija.

Hi Pavan,
                 Thank you.
                 To copy the values I am not getting any input screen to input the values. I observed one thing that the type that I am referring in the Rule is a deep structure. Is this is the reason that I am not getting the input screen to enter the values?
I tested by creating aother rule by taking a field for that rule I am getting the input screen to simulate the Rule.
Can you please suggest if the rule will not work then what I have to do? without the rule how can I get the agents?
Thank you.
Srija

How to display of the rule explanation screen within claim expert mode (ICLDCD02)

Hi all,
I just read Consulting Note - 1586478:BRFplus in FS-CM. According to the note, it is possible to display the rule explanation screen with claim expert mode. Would you like to provide how it can be done to me? It will be highly appreciated.

Just a remark: this is an excellent note - I'm wondering wether this is linked from SAP Application help.
Best Regards,
Tobias

Possible bug with iTunes 11 ?? (with Smart Playlists)

Hi folks
New to Apple Support, but after upgrading to iTunes 11 earlier today (on my Mac Mini) I've discovered a potential bug / difference in the way it operates compared to earlier versions. Can someone else try something similar and see if they get the same result - I think I read somewhere that v11 is not available on Windows yet, so I cant compare what happens there
I've imported all our CD's into iTunes, and we've set up several Smart Playlists (SP). Using the Rating setting for the songs, we can break them up into groups, eg
Rating 0 = not yet processed
Rating 1 = not interested in listening to again
Rating 2 = kids songs (for our children)
Rating 3 = christmas songs
Rating 4 = songs i like, but my wife probably wouldnt
Rating 5 = songs we both like - good for background music etc
Using Home Sharing to our iPad's rocks !!
Now, onto the bug.
Using the SP that has just songs with Rating 0, I could play any song, set the Rating to whatever, and naturally once set, that disappears from the SP
In all earlier versions of iTunes, playback would continue with the next song, so I could set that Rating, etc etc. Worked really well to churn through a chunk of songs in say 15 minute blocks
With iTunes v11, playback stops as soon as I set the Rating.
How can you help ?????????? Set up a smart playlist with whatever criteria you like - make sure you have a number of songs returned and ensure Live Updating is set, have a song playing, and make that song no longer valid for that SP. Anyone doing this in earlier versions of iTunes should have the next song begin, and if this is a bug, then those using iTunes 11 will have playback stop
Sorry for the long post, but in order to determine a potential bug, you need to describe the situation and how to test it.
Thanks for reading
PS I'm on a 2010 Mac Mini with OSX v10.7.x (whatever the current release of that is) and just upgraded to iTunes 11

Soo, maybe it isnt possible bug, but the way Apple have changed iTunes when going to v11. Stooopid
Anyway, found this link about downgrading to an earlier version. I've just completed it and found one or two "errors" in the method, which I'll detail below
http://www.emacconsulting.com/apple/itunes/downgrade-itunes-11-to-itunes-10-7/
In the latter part of the instructions
11) Open your iTunes Music Folder.
If you never moved your iTunes folder it’s located here:
Your HD/Your User/Music/iTunes
Or go to the Finder type: Command + Shift + G
Paste this into the the dialog: ~/Music/iTunes
If you moved it to another hard drive, you will know where to locate your iTunes folder.
12) Open the “Previous iTunes Libraries” folder.
13) Find the most recent copy of the “iTunes Library 2012-xx-xx.itl” file.
Normally it will the last file at the bottom of the list.
14) Drag a copy of the file into the iTunes folder.
15) Delete the “iTunes Library” file.
16) Change the name of the “iTunes Library 2012-xx-xx.itl” to ”iTunes Library” with no .itl extension.
In #11, I simply went to "My HD"/Users/"My User"/Music/iTunes
Copied the latest .itl and moved it up a directory level
The old file in #15 is called "iTunes Library.itl" - which I renamed, and renamed the copied version back to "iTunes Library.itl" = though I do have extensions showing, some people may not and hence wont see the .itl
Anyway all is fixed in my world, and when I launched v10.7, it asked me if I wanted to upgrade to v11 - I said No and not to prompt me again. Playcount issue is resulved, as is changing SmartList criteria with playback continuing
Apple - please correct these bugs before releasing any new versions of iTunes... you've made a very large number of people unhappy

BRFPlus - Possible for business users to change the rules ?

Hi,
1) Is it possible for business users to change the rules in decision table, tree, formula etc?
2) If yes, what are the steps to achieve it?
Thanks.
- julius

Hi Julius,
do you know the BRFplus knowledge center:
Business Rule Framework plus [original link is broken]
There is a video called Bonus Determination that shows the steps for a developer and a business user.
The developer may create the function, data objects and maybe the initial decision table. The business user then can create the lines in a decision table.
In the 701 version this should work fine. The 701 trail version is a pre-release CD which contains some bugs that should be gone in the latest SP of 701.
BR,
Carsten

Possible bug, at least serious problem, in the AS3.0 event architecture

Event bubbling causes a compiler error when it should not.
High up in the display list, a
listener has been added for TypeBEvent which extends
TypeAEvent.
Lower in the display list, a
different object dispatches a TypeAEvent, and sets bubbling to true
(and possibly, cancellable to false).
A Type Coercion error (#1034)
results! The listener receives the bubbled event which is of the
same type as the base class of the handler event type. The event
object "cannot be converted" to the TypeBEvent it is
receiving.
Circumstances
This situation came up in a real Flex project, where a video
player that had been loaded as a module within another module
dispatched a PROGRESS ProgressEvent, and a listener had been added
to the higher level module for its ModuleEvent PROGRESS event,
ModuleEvent subclasses ProgressEvent. The video player bubbled its
event, and the compiler threw this error: "TypeError: Error #1034:
Type Coercion failed: cannot convert
flash.events::ProgressEvent@1f2de0d1 to mx.events.ModuleEvent."
This compiler error does not make sense from a developer
perspective, because it means any class lower on the display list
can break the player (not the program, the player) simply by
dispatching an event.
Our team lost a great deal of (expensive) time trying to
locate the source of this problem, since nothing about the compiler
error – including the stack trace! – indicated the
high-level class. In fact, the module developer didn't know
anything about the high-level class which was compiled to a swc
library, and the event being dispatched was in the flex class
library, so neither end of the problem was very visible. Because
the error only pointed to the video player class the developer
naturally went into the flex classes first and tried to solve the
problem in their scope before finally giving up and bringing the
problem to others on the team.
Truly a case where the software defeated team workflow.
Our conclusion
We love the new event framework but, this seems to come
pretty close to qualifying as a bug. The high-level event listener
simply should NOT have received, then choked the player on the
bubbled base-class event. It should either receive it or not. If it
did receive the event, the code in the handler could check whether
the event target was appropriate... but instead the player breaks
and does not provide any clue as to where, it only indicates the
dispatching class as a culprit. Even short of fixing the problem,
improving the error message so that the receiving event handler is
clearly implicated would be a start.
Again I am of the opinion that this compiler error should not
take place at all because the top class subscribed specifically to
the subclassed event type. A bubbled event that breaks the player
due to an unrelated listener is just a huge black hole, especially
when multiple developers are working on different tiers of a
program.
Could we get a reply from someone at Adobe on this issue?
Thanks very much,
Moses Gunesch

If you create a metadatatype with a single metdata block, and you reference that in your vm/cm cell attribute using a *one* based index, Excel seems to see the link and it honors it when saving the spreadsheet.
So, I ended up with something like:
<c ... cm="1"/> (I'm dealing with cell metadata, but the concept is equivalente to value metadata)
<metadataTypes count="1">
  <metadataType name="MyMetaType" .../>
</metadataTypes>
<futureMetadata count="1" name="MyMetaType">
  <bk>
    <extLst><ext
uri="http://example" xmlns:x="http://example"><x:val>87</x:val></ext></extLst>
  </bk>
</futureMetadata>
<cellMetadata count="1">
  <bk><rc
t="1" v="0"/></bk> 
</cellMetadata>
Hope this helps.

Looking for a SQL query to get all the possible Alert Messages from the Rules in a Management Pack

For reporting, I'm looking to get a SQL query of all the possible Alert Messages for Rules configured in a Management Pack (not necessarily the ones that have thrown alerts). I can do this for Monitors, but not for Rules.
The configured alert messages for the Management Pack Monitors
go like this: ManagementPack > MonitorView> RuleModule > RuleModule.Alert Message > Localized Text
The configured alert messages for the Management Pack Rules
should go something like this, but there is a missing link: ManagementPack > RuleView > RuleModule > ? Missing Link ? > Localized Text
The Rules are tied to the Module, but I don't see a connection from the RulesModule to the Alert Message that I see in the LocalizedText. The Rule names do not always equal the Alert name.
Can someone provide the missing link?

Hi,
please try below powershell code to find the corresponding management pack for specific alert:
$Alert = get-scomalert | where {$_.Name -like 'Agent Proxy Not Enabled*'} | select -first 1
If ($alert.IsMonitorAlert -eq "True") {
write-host "Ths is a monitor-generated alert"
get-scommonitor -ID $Alert.MonitoringRuleID | select Enabled, DisplayName, ManagementPack
else
write-host "This is a rule-generated alert"
get-scomrule -ID $Alert.MonitoringRuleID | select Enabled, DisplayName, ManagementPack
In addition, please also refer to the below link:
http://blogs.technet.com/b/mazenahmed/archive/2011/12/02/using-powershell-to-map-opsmgr-active-alert-to-its-corresponding-rule-monitor-and-management-pack-name.aspx
Regards,
Yan Li
Regards, Yan Li

What are the changes / enhancements / or possible bugs in LR 5 Auto Tone

Can anyone explain what, if any, changes, enhancements, or possible bugs were introduced in the functionality of Auto Tone since LR ver. 5.0. The reason I ask is that I get different results for the Exposure and Contrast adjustments when applying Auto Tone (using ver. 5.3) from the results (using ver.5.0) shown in the book "Adobe Photoshop Lightroom 5 CIB" in the "Using Quick Develop in the Library module" section, step 4 on page 37. (This difference in results between LR versions was confirmed by the authors of LR5CIB.)

I'm not sure about any new bugs but the radical exposure mis-calculations have been improved. I had photos that were over exposed to 5 (and even 10, believe it or not) that were exposed to a more appropriate 2 or so following the improvements (in Lr5.2 if memory serves). It's also less likely to radically underexpose.
Enjoy, (in my opinion, it's much better)
I think there may have even been further improvement in Lr5.3 but I can't swear to it - seems to preserve a little more contrast than in 5.2 - could be my imagination..
Rob

Is it possible to copy the SoD rules in the same system to diff. Rule SetId

Hi all,
We have created SoD rules as per our business requirement in RAR 5.3 Component connecting to the QA system. We want to copy the same rules into another different RULE SET for the same QA system. Is this possible?
Ex: ABRULE SET - Tailored as per Business Requirement and generated rules linking to QA system [Manually configured the SoD rules].We will use this Rule set for our Production System as it was frozen as per the Business Requirement (This we will do by establishing another JCO to production system)
We wanted to copy the entire SoD rules of ABRULESET to another rule set say YZRULESET. This YZRULESET we will use for making any configuration changes in future before making changes to ABRULESET which will be connected to Production System.
Is it possible to copy the SoD RULES from one Rule Set ID to another Rule Set ID within the same system? If yes, please provide us the procedure on how to copy the rules of one Rule set Id to another Rule set ID.
We explored the options of Export & Import Rules but no where it asked for new Rule Set ID for copying.
Thanks and Best Regards,
Srihari.K

Here is a method I've seen a few customers use, which seems like a good idea:
- load the standard rule set
- create a new empty rule set
- create your risks in the new rule set ( initially this could be a re-import of the risks, risk_desc and risk_ruleset files with a few changes done in excel to change the IDs)
This means you have an exact copy of the SAP standard risks in your own rule set, using the SAP functions.
Even if you have to define your own risks, there's an enormous value in the functions. The identification of TCodes and objects that do similar business transactions is probably the most difficult thing to reproduce on your own.
Now, whenever you have to change a risk (risk level, description, owner) you do that in your own name space
If you have to change a function (modify objects, add custom TCodes), you COPY the function to your own name space and change the risk in your name space to use the changed function.
If you want to be smart, you do all your own stuff in copies of the text files that come with the support packs (i.e. not in rule architect). That may not be an option if your compliance requirements want you to use the change history or automatic workflows that RAR provides, but if you don't need that, here's the advantage of this:
When a new set of rules arrives every few months, you delete your rules with a deletion script you can get from SAP support, upload the standard rule text files, upload your own text files, and you're set with your own rule set that makes use of SAP's latest updated functions.
This is (currently) basically the only way to automatically apply SAP changes without doing it manually, thus leveraging changes to functions by SAP.
All your changes will be in your own text files, which you can document and version control according to your requirements.
Not exactly the way according to the manual, but an interesting concept worth considering.

Possible Bug in "The Rules"

Similar Messages

Maybe you are looking for