Possible bug on n80 v4 firmware?

Has anyone else noticed that if change the time settings in the clock from operator to manual or vice/versa it disconnects you from the network - only way to get it back onto network is to switch phone off and on again.

This bug does not occur for me. My operatore is T-Mobile in the UK. UK unbranded N80 on standard generic V4 firmware.
Z

Similar Messages

Gallery Bug in N80 v5 firmware?

Since i have the new V5 Firmware installed on my N80 it wont randomly display all the images that are on the storage card. All i will see then are the two Links in the gallery. The only solution to this problem is to restart the phone. Then it will display all images again.
I never experienced this problem with the predecessors of the v5 firmware and it really annoys me a lot.
Anybody else having these problems with the v5 n80 gallery?

I have had V5 on my N80 a year or more now and there is definitely no reduction in battery life.
Make sure that things you don't normally use like 3G, bluetooth and wlan scanning is switched off. If this doesn't work then try resetting and failing that, reinstall V5.

New bugs in Nokia 6680 Firmware version 5.04.07 (1...

I've recently upgraded the firmware in my 6680 via my PC to the latest Nokia firmware (was originally running 4.04.07) and since doing this I've spotted two possible bugs.
The first is in the call log whereby the phone stops adding called numbers to the dialled, missed and received logs. Closing and re-opening the call log application on the phone doesn't clear this problem. When the phone is power-cycled (i.e. rebooted) the previous dialled calls re appear in the log. So far I've only spotted this problem once on Saturday, since I upgraded the software the previous Friday morning.
The second bug is a bit more frustrating whereby the phone appears to stop responding to voice commands. I use my phone a lot when driving with the CK-7W car kit, both in Bluetooth and wired mode depending how far I'm going. Twice now when I've pressed the remote button to activate voice dialling I've instantly got an error tone despite all the voice tags present on numbers stored in the phone. Again, power-cycling the phone seems to clear the problem.
Neil.

Further to my previous post on this, it appears that with the new firmware v5.04.07 my voice activated dialling stops working completely after a period of time when the phone has been turned on. If I reboot the phone the voice dialling and commands will work initially (using the Nokia remote button on the CK-7W), however after 3 or 4 hours of the phone being on it stops responding.
The problem manifests itself when I've been at work all day and the phone has been out of my car and left turned on. Later in the day when I travel back in my car and try to use voice activated dialling, I find it stops working and just gives me an error tone. I never had this problem with v4.04.07 installed on my phone and I find it quite frustrating as I can't even answer the phone remotely when it rings in the car!
I presume people from Nokia read these forums, please could you get your software engineers to look in to this for us as otherwise I'll have to take the phone back under warranty to an NSC and see if there's anyway the firmware can be rolled back to v4.04.07.
Neil.
PS: Apart from this problem, v5.04.07 is a much better software release and my phone and it's features in general work much better. I also like the way when pressing 'send' on the phone, it now doesn't mute my car radio until the call has successfully established on the network and starts ringing etc.

Possible Bug In Apex 4.0.2

Hi Everyone.
I would like to report what I think is a bug in Apex 4.0.2.
If you go to my workspace on apex.oracle.com:
Workspace = EEG
Username = [email protected]
Password = galaxy (all lowercase)
Run the application: 37796 - Elie_Various_Goodies [no credentials are required]
This app was imported from my 4.0.1 workspace at my job. On the page I created two Date Picker items, P1_BEGIN_DATE and P1_END_DATE. I set them up so that whenever a user selects a begin date, a dynamic action "MANAGE_DATES" fires and automatically sets P1_END_DATE to this selected begin date value. Now when a user goes to select an end date, the displayed calendar starts at the previously selected begin date rather than the default of "Today".
All of this worked fine on my office (4.0.1) workspace. However, after exporting this app and then importing onto apex.oracle.com, none of this functionality would work. Even worse, whenever I try to select a begin date or even an end date, the selected dates never make it into the date picker fields. Displaying the "Session" window shows these fields as empty.
It was only after I copied the two date picker fields and also re-created my dynamic action (P1_BEGIN_DATE2, P1_END_DATE2, MANAGE_DATES) did my functionality return.
This behavior is quite strange. I can only think this is some sort of bug attributed to the export/import process when exporting a 4.0.1 app into a 4.0.2 workspace. I am not sure if this bizarre behavior happens with non-date picker items. Nor am I sure if this beavior would be repeated if I export/import from 4.0.2 into the another 4.0.2 environment.
Another strange thing I noticed. If I change my date picker items to be "date picker (classic)" type items, the dynamic action does not work at all. This is true in both 4.0.2 and 4.0.1. I'm not sure if this a bug or not. It could be that the classic date picker is just not "javascript" enabled so to speak. If that is true, then it would have been nice if the docs would have warned us about this.
Has anyone else seen this behavior?
Thank you.
Elie

Hi Joel.
First let me thank you for the warning about allowing "everyone" access to my workspace.
You're correct, of course. Anyone could destroy anything within my workspace. I guess I was too trusting especially as I have seen many posts on the Forum where others have given access to their workspace so that responders can offer help. I really should be more discreet about this. Again, thank you. Needless to say, I have changed my password.
With respect to the possible bug, the MANAGE_DATES dynamic action is intended to be a submit page because that is the only way I can see to get BOTH the P1_END_DATE date picker item as well as the end date textual field to be assigned the selected P1_BEGIN_DATE. I tried to use a dynamic action in which javascript sets the value of the end date textual field to the selected P1_BEGIN_DATE value. This works without the need to submit the page. Unfortunately, this does not cause the P1_END_DATE date picker item to default to this value. Instead, the default remains at today's date. This is why I finally resorted to a dynamic action that submits the page whenever a new value is selected (that is, a "change" event) from the P1_BEGIN_DATE date picker item.
All of this works in my office 4.0.1 environment. However, I was puzzled when this fails under 4.0.2 on the hosted web site at apex.oracle.com. This is why I posted a "possible" bug in 4.0.2.
I hope this all makes sense.
One more thing, as already mentioned in my original post, this "defaulting a date picker" functionality does NOT work at all for the "classic" date picker items in both 4.0.1 nor in 4.0.2. I realize one can implement this functionality (I' guessing) my using, say, a "onChange" javascript call to submit the page. It's just funny that the "classic" date picker items are not acted upon by the dynamic action MANAGE_DATES that submits the page.
Thank you.
Elie

Possible bug found in Mac Os X Tiger 10.4.11 in conjuction with iPod Touch

Dears,
I think I've found a possible bug in Mac Os X version 10.4.11 in conjunction with iPod Touch.
When the iPod is connected during boot, my Bluetooth hardware fails to be detected. When I restart the portable without the iPod connected, my Bluetooth hardware is recognised & activated again. It is reproduceable.
1. Attach iPod Touch before starting the MacBook Pro
2. Boot the Macbook
3. Bluetooth hardware should be rendered inoperative
Restore functionality:
1. Detach the iPod Touch
2. Reboot the portable
3. Bluetooth hardware is restarted / recognised.
Regards
Cedric

wrong category

Possible Bug with Drag-and-Drop Being Published via HTML5 - Getting "Undefined" Error When Dragging Object

Hello,
I came up with a way to use drag-and-drop interactions that will take advantage of file input so that I may create a drag-and-drop interaction that uses one draggable object over and over allowing multiple scoring/tracking possibilities. Example use...is having the draggable object be dynamic in that it randomly changes its text so that a learner can drag a term it's possible classification.........thus allowing the possibility of having many terms easily loaded without having to redo a drag-and-drop interaction for each needed terms/classifications updates/changes.
My Issue: When using a variable to represent the text for a draggable Smart Shape object, I'm getting the error message "undefined" when, clicking/pressing on the object, as well as during the drag of the object. This issue occurs when publishing the project in an HTML5 format. Flash interestingly enough seems to work perfect...but we are not interested in publishing via Flash any longer.
To better help you explore this error message, I've set up a test project so that you can see when and how the "undefined" message shows up during a drag-and-drop interaction. I've also included the Captivate 8 project file used to make the exploration project I'm sharing in this post.
Link to Captivate project I created for you all to explore "undefined" error message": http://iti.cscc.edu/drag_and_drop_bug/
Link to this Captivate 8 Project file: http://iti.cscc.edu/drag_and_drop_bug.cptx
It's pretty interesting how things react in this demo, please try the following actions to see some interesting happenings:
Drag the Yellow (or variable drag box) to the drag target.
Drag Black Hello square to Drag target and click undo or reset - watch the undefined message come up on the Yellow (or variable drag box).
Drag the Yellow (or variable drag box) to the drag target and then use the undo or reset.
Move both draggable boxes to the drag target and use the undo and reset buttons...
Anyhow, I know you all are sharp and will run the demo through its paces.
I'd really be very honored if anyone help me figure out how I could (when publishing out to HTML5) no longer have the "undefined" error message show up when using drag-and-drop with a variable for shape text. This technique has been well received at the college I work at...and I have many future project requests for using such an idea on a variety of similar interactions. I'd love see a solution or see if this might be a bug Adobe may be able to fix!
I tried to find a solution to the issue documented here for quite some time, but I was not able to find anyone with this problem much less attempting the idea I'm sharing in the help request - save the darn "undefined" message that comes up!
Many thanks in advance for any help and/or direction that you all may be able to provide,
Paul

Hello,
I just wanted to supply a minor update related to my drag-and-drop question/issue stated above:
I did another test using Captivate 7, and found that the undefined error (publishing as HTML5) does not appear and the variable data remains visible - except the variable data turns very small and does not honor any font size related settings.
I did go ahead and submit this to Adobe as a possible bug today.
Thanks again for any help related to this issue. If the issued documented above is solved, it will allow many amazing things to be done using Captivate's drag-and-drop for both regular type projects as well as interaction development for iBooks!
Matter of fact if this issue gets fixed, I'll publish a Blog entry (or video) on way's I've used Captivate's drag-and-drop to create dynamic learning activities for Higher Ed. and for use in iBooks.
~ Paul

N80 new firmware release date and wishlist

It has been no update on firmware since the latest release V.5.0719.0.2 for N80 since 24 May 2007. With so many models rolling out and firmware revision released for other new and old models, one might wonder if N80 is being forgotten and the firmware revision is put on-hold forever in cold storage?!
There has been so much discussion on the expectation for last firmware release but what we get is only product stability without signficant boost of functionality and performance. I believe this has made many proud owner of N80 phone waiting with a long neck.
After reading through the forum, I have summarised some of the common expectation on the next release (hopefully) in a wishlist below. All is welcome to provide input on the improvement they expect in next firmware release. It is also hope that any status of firmware upgrade for N80 news to be shared here.
The N80 new firmware wishlist
i) AD2P bluetooth profile support
ii) Nokia Maps application support (currently, N80 is not support model for Nokia Maps application)
iii)Enhanced digital music player (similar with N73 ME with album art browsing)
iv) Music file IDD tag editing (change artist, song title, genre information)
v) Video ringtone
vi) Skype VOIP support
vii)Mymobilesite.net intergration for seamless moblogging interface
viii)Auto birthday reminder storing from Contact entry
Thats all I can think of for now.
was: 3310--> N80 v5.0719.0.2--> N82 v31.0.016; now: 5800xm v40
KeN82Ny

Hi Jacob,
Thanks for your quick response but if you go to the download section of Nokia Maps, N80 is not listed for selection on Nokia Maps setup file download. It is obvious that the compability page does show N80 is supported but which setup version to choose? I myself have Nokia Maps installed previously. But I believe there are new feature and interface in the latest version of Nokia Maps.
Yes, mymobilesite.net is available for N80, but perhaps the new firmware can include it in the new firmware release to save other the hassle to install
something to add:
ix) HSDPA mobile internet surfing speed (3.5G?)
was: 3310--> N80 v5.0719.0.2--> N82 v31.0.016; now: 5800xm v40
KeN82Ny

Possible bug: Saving array with extended and double precision to spreadsheet

If one concatenates a double precision array and an extended precision array with the "build array" vi and then saves using "Write to Spreadsheet File" vi any digits to the right of the decimal place are set to zero in the saved file. This happens regardless of the format signifier input (e.g. %.10f) to the "Write to Spreadsheet File" vi.
I am on Vista Ultimate 32 bit and labview 9.0
This is a possible bug that is easily circumvented by converting to one type before combining arrar to a spreadsheet. Nonetheless, it is a bug and it cost me some time.
Solved!
Go to Solution.
Attachments:
Spreadsheet save bug.vi ‏9 KB

Hi JL,
no, it's not a bug - it's a feature
Well, if you would look more closely you would recognize the "Save to Spreadsheet" as polymorphic VI. As this polymorphic VI doesn't support EXT numbers internally (it only supports DBL, I64 and String) LabVIEW chooses the instance with most accuracy: I64 (I64 has 64 bits precision, DBL only 53...). So your options are:
- set the instance to use as DBL (by right-click and "Select type...")
- make a copy of this VI, save it with a different name and make it support EXT numbers (don't rework the polymorphic VI as you would break compatibility with other LV installations or future revisions)
And yes, those coercion dots always signal some conversions - you should atleast check what's going on there...
Message Edited by GerdW on 05-21-2010 10:01 PM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Possible bug? formatted number 0 displays as 4,294,967,295

This is really two questions in one. First, I have a routine
that sometimes provides a result of 0, which is *sometimes*
displayed in an AdvancedDataGrid column as 4,294,967,295, which I'm
assuming is somehow a meaningful number (largest int?). Anyway, I
have an ADG with a column defined as:
<mx:AdvancedDataGridColumn headerText="Remaining work"
labelFunction="rem_work_fmt" textAlign="right" />
The labelFunction called is shown below:
private function rem_work_fmt(item:Object,
column:AdvancedDataGridColumn):String
var num:String =
numberFormatter.format(item.get_remaining_work());
trace ("result: " + num);
return num;
The trace output prints: "result: 0" as expected, but the
number displayed in the grid is sometimes 0 and sometimes
4,294,967,295.
More weirdness, this only happens to the last column in the
ADG. I call the same format logic on a different column and have
never seen the wrong result. Also, the same underlying function
"get_remaining_work()" is called elsewhere on the same data and the
result is correctly displayed in a text field as 0.
Second question, I've run into some other possible bugs,
which I haven't reported because I found a work around. How does
one do that in the beta program?

lw1001,
Bugs can be filed in the public bug base at
http://bugs.adobe.com/flex/
You'll need to sign up before you can submit bugs.
Also, if you can attach the bug files to the bug report, it
makes it a lot easier for Adobe to investigate.
Let me know if you have any further questions/problems.
Peter

A possible *bug* in java jcombobox

Hi all,
I think i found a possible bug in java jcombobox .. i am sure some of you must have already experienced it..
supposedly you put a jcombobox in a jpanel
returned the panel from a method to a calling method..
and that method adds it to another panel that it had created to a frame..
and if this happens dynamicaly at runtime, as only after u click a button..
meaning : without adding the combobox or the immediate parent panelto the contentpane .. directly..
Then,
your combox's keylistener may not catch events fired.
.. this has happened to me many times.. and always i could only find a way out
.. by adding the combobox to panel that is loaded during startup itself and is
.. not returned through a method call.
Your opinions please ?
'Harish.

All components in a UI are created at run-time.
When you create your JFrame you call pack() to align and resize the UI. This validates all the components, and sets the default focus on what ever component should have the focus at start up.
When you create components and add them as children of another component you have to validate the child and parent. This can be done by calling JComponent.validate()
As for keylisteners not getting called, this might be fixed if you call grabFocus on the new combobox. I can't see a reason why any listener would stop working.
For me to really understand what your talking about. I'd need to see source code reproducing this problem.

Can someone confirm a possible bug with Universal Access?

Can someone confirm a possible bug with Universal Access?
I have a Mac Pro 3,1, 10.7.1 but if you could confirm or not this possible bug with any model.
In Energy Saver preference pane:
Set Mac to never sleep.
Set Display Sleep to ~2 minutes.
In Desktop & Screen Saver:
Set screen saver to start at ~1 minutes.
In Universal Access:
Check Enable access for assistive devices.
Check radio button Zoom to On.
Zoom in window not checked.
Confirm that Zoom works by pressing:
⌥⌘= (option, command, =).
Set screen back to normal by pressing ⌥⌘-.
Let screen sleep after screen saver starts.
Wake screen and see if ⌥⌘= still works.
Thanks … Ken

Other than the time intervals (smallest Screen Saver kick-in is 3 minutes), it works fine for me - at least I can still zoom in/out after waking the display.
Tested on two different MacBook Pro models in 10.7.1

What are the changes / enhancements / or possible bugs in LR 5 Auto Tone

Can anyone explain what, if any, changes, enhancements, or possible bugs were introduced in the functionality of Auto Tone since LR ver. 5.0. The reason I ask is that I get different results for the Exposure and Contrast adjustments when applying Auto Tone (using ver. 5.3) from the results (using ver.5.0) shown in the book "Adobe Photoshop Lightroom 5 CIB" in the "Using Quick Develop in the Library module" section, step 4 on page 37. (This difference in results between LR versions was confirmed by the authors of LR5CIB.)

I'm not sure about any new bugs but the radical exposure mis-calculations have been improved. I had photos that were over exposed to 5 (and even 10, believe it or not) that were exposed to a more appropriate 2 or so following the improvements (in Lr5.2 if memory serves). It's also less likely to radically underexpose.
Enjoy, (in my opinion, it's much better)
I think there may have even been further improvement in Lr5.3 but I can't swear to it - seems to preserve a little more contrast than in 5.2 - could be my imagination..
Rob

Copy and paste adjustment problem/ possible bug.

Hi all
I have just encountered a very strange problem/ possible bug.
I have been working on a file in photoshop cs5 that had come from lightroom 5.3. This was then saved (automaticaly becomes tiff file in Lightroom). I then wanted to make some more adjustments to it in lightroom (using local adjustment clarity). I then tried to copy the settings of the adjustment brush from the tiff to the original raw file. This is where it gets very strange. The adjustments are copied but they are rotated ccw by 90 degrees! I can replicate this every time.
Could someone else try to see if this problem exists on their catalogs or if its a corrpution problem my end.

Noted on the bug, thanks.
1762hd wrote:
Hi Geoff
Heres the summary for bug report - please note this bug also affects radial filter/healing brush and crop
Scenario
1 open a portrait raw image in photoshop using render using lightroom (I am using cs5)
2 back in lightroom make a change using the - adjustment brush/ radial filter/healing brush or crop - to the newly created tiff image.
3 copy and paste this adjustment to the original raw file.
problem
all effects are rotated.

Vote of thanks For New N80 V4 Firmware

After previously moaning about my N80, I just wanted to say thanks to Nokia for the last N80 v4 firmware upgrade, so far it has made my N80 a much better, usable and stable phone.
I hope that you will provide further enhancements to this great phone.
Thanks.

18-Oct-2006
05:26 PM
dougieth wrote:
I have contacted Orange and told them to get a move on or I will be changing service provider to one that allows new firmware upgrade. All Orange users should e-mail Orange and let them see how disappointed we all are.
Been there, done that, no reply from Executive Office (yes I emailed them direct several times - much better than cust services if you want something resolved!)
I'm currently looking at my contract VERY carefully so I can shove it somewhere painfull, and move networks OR get a handset which they WILL support (which prob means not a Nokia!)
edited to removed irrelevant linkMessage Edited by orinoco on 19-Oct-2006
09:35 AM
Orange Handsets : Nokia 51 > NK702 (6130) > 6210 > 6310i (silver)> 7210i > 6230 > 6230i (silver) > N80 (silver) > N95-1
T-Mobile: N96

On-demand process in page processing - possible bug?

Hi
Came across a possible bug today, certainly not a big one and unlike to affect many people but...
1. Create an on-demand application process
2. Create an on-demand page process that calls the application process
3. Delete the application process.
Now at this point, the page process is still available for editing/deleting etc.
4. Copy the application.
In the new version of the application, the page process shows as plain text in the application builder with no link to edit or delete it and when the page is run, it predictably fails at the processing point of the page process when it tries to find the application process (the id from wwv_flow_processing is shown in the error for the old application process).
The only way to get rid of the page process is to select 'Edit All' and then select and delete it - then everything is hunky dory again.
A minor issue I know, but maybe someone will have the same issue one day and stumble across this thread :)
Cheers
Ben

At the moment I cannot say if your link can help. Right now the call of the On demand Process looks like this:
Inside annonymous PL/SQL Region:
<script type="text/javascript">
get = new htmldb_Get(null,'||:APP_ID||'.,'APPLICATION_PROCESS=F_REPORT_NAME',0);
gReturn = get.get();
document.write(gReturn);
</script>

Possible bug on n80 v4 firmware?

Similar Messages

Maybe you are looking for