Possible bug - only able to COPY or COPY AS DNG, but not MOVE in import
I have run across a strange situation. In LR3 in my WinXP Pro system, I have been importing as usual, typically via MOVE, and that has worked just fine. I now am trying to import 80 images totaling 1 GB from a memory card and nothing seems at all unusual. However, the import dialog, upon opening, immediately switches out of MOVE as it was used in the last import, and goes to COPY; in fact, MOVE is greyed out. I have tried restarting LR several times, but always get the same behavior. Any thoughts on what may be going wrong? Thanks.
But I know that I have very commonly used the MOVE function in getting images off of a memory card. And I did this in earlier versions as well as in LR3. What could I have done unknowingly in the past to allow a MOVE? Thanks.
Dilip
Similar Messages
-
Hi, I am trying to install Windows on my MacBook Pro with bootcamp. Every time I open bootcamp I am only able to check the first two boxes but not the third one saying "install or remove Windows 7". I did this before using the same computer and the same hard drive so I am not sure why this is happening now but did´t happen then. Any solutions ?
Was your Bootcamp info.plist manipulated to change any options?
-
It seems like I cannot get GPS only to work on my ipad3 (4g version, but not on an active cell plan, and wifi off). Is there some new requirement in 7.1 or 7.1.1 to have cell and/or wifi enabled for GPS to work? I am testing with MotionX, garmin blueChart mobile, and a GPS monitoring tool. All show no signal. If I turn on cell and wifi, it says I get gps signal, but can't tell if that is from the GPS chip, or just from cell and wifi only (maybe with some gps mixed in)? Any ideas on how to get iPad working with GPS only??
Roger that. Thanks for your time.
System:
Windows 7 64bit
Processor: AMD phenom IIX4 965
RAM: Gskill Ripsaw F3-12800CL7D-4GBRM (2-2GB sticks)
GPU:EVGA Classified Nvidia GeForce GTX 560 Ti 448 core
PSU: Kingwin 1000W laser gold (LZG-1000)
Yes. tried the one ram stick, no go. I have been trying to boot off/install the windows 7 disk but am unable to get to the point where windows starts installing after its gathering information portion of the install. I can get to the disk selection screen of the install with the WD HD on SATA port 2 but then get the "cant install messages" when I try to select the Vertex 3. Yes I can see the Vertex 3 Drive as well as the WD drive at this point. some times I have to hit "scan" a couple of times. -
When I check for software updates only itunes and random other updates show up but not security updates or safari update. When i check installed updates I realized my last security update was 2011-004 and I still have safari 5.0.6. Can anyone help me?
Don't panic. OS X 10.5.8 is the most popular PowerPC OS out there. People run it everyday without security breaches, including myself. It isn't Windows!
If you're really that worried, I highly recommend Sophos Anti-Virus for Mac Home Edition. Supports PowerPC & Intel and Mac OS X 10.4-10.7.
http://www.sophos.com/en-us/products/free-tools/sophos-antivirus-for-mac-home-ed ition/system-requirements.aspx
Direct download: http://downloads.sophos.com/home-edition/savosx_73_he.dmg -
Using QuickTime Pro with an .mpg movie, why can I only get it to play from the beginning, but not from any other point in the video? How can I fix this?
Baffled in SBWhat format of MPG is this? Is this an MPEG1 or MPEG2 video? How was the video created?
-
Trying to attach pdf files to emails I'm sending to myself. Instead of attaching the file, it copies the text. I want the file so I can have it on my iPad. I've been able to do this in the past, but not the last two tries. What am I doing wrong? Thanks.
You aren't doing anything wrong.
If the PDF is short enough, your iPad Mail app will display the text as part of the mail.
Actually it is still an attachment.
Tap and HOLD on the text and you should see options to "Open In..." that will allow you to open the PDF in most PDF readers such as iBooks, GoodReader, etc. -
I would like to change my back ground color in one frame for a logo that i am using I am able to change it on the canvas but not on the timeline?
Are you using FCPX? It doesn't have a canvas. Do you really mean one frame, like 1/30th of a second? Add a custom generator underneath the logo. Make it whatever color you want. Make it however short you want.
-
I have read the thread about turning off dialpad sounds when calling a number. I used to always be able to do this on my 4S but not so since the latest software on the 5. Keyboard clicks are turned off and still have dialpad sound. I've NEVER had to mute to dial before.
I really do not think it is the iPad or your network connection. Other users have reported this very same issue. Try this and see if it works for you - it may not work - but it's easy to try - harmless - and it has worked in the past for others.
Try signing out of your account and restart your iPad.
Go to Settings>Store>Apple ID and tap the ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. Go back to Settings>Store> Apple ID and sign in again. -
Two Macbook pros circa 2009 in our temporary household in Turkey suddenly failed to boot and got stuck on the grey screen. They were able to boot at the Apple store, but not when we brought them back to our apartment. Could this be a coincidence? A
THank you Ogelthorpe. When my wife's computer I went on line to the site that you sent and tried everything But nothing worked. When my son came to visit and his MacBook Pro did exactly the same thing we became suspicious - too much of a coincidence. We took both computers somewhere else, out of our apartment, and they both booted. We ran disk utility on both, but the report in both cases was that there are no issues with the hard drive. Back in our apartment neither will boot up. My MacBook Pro is a later model with a solid state drive and it seems to work fine here.. I tried an external drive and it works fine. We think that this has something to do with some kind of magnetic interference in our apartment to which the 2009 drives are susceptible. It is indeed a mystery!
alf -
I have an iphone 4s. able to receive all the incoming mails but not able to send mails through this iphone 4s. please help.
delete and reinstall the email account.
-
I have CS6 and need to be able to utilize the open GL option but not sure what I need to do to make
I have CS6 and need to be able to utilize the open GL option but not sure what I need to do to make this work...trying to bring a 3D pdf into photpshop for animation. Screen simply reads "enable 3D view'.
my goal is to bring 3d solidworks drawing files into photoshop and animate. one export option is a 3d pdf file which opens and rotates well in Acrobat pro...but when trying to bring it into photoshop. It looks like the attached pic."enable 3d view"
-
Am not able to import videos to imovies, as am able to view the videos in iphone but not able to import in imovies .Pls help
Hello Ephremekka
Start your troubleshooting with the article below to get your iPod Classic to show up in iTunes to be restored.
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363
Regards,
-Norm G. -
Just hooked up new apple tv for first time. able to connect to internet (netflix, youtube) but not able to connect to my itunes account via home sharing. apple tv tells me to make sure computer's itunes has home-sharing enabled, which it does. any advice?
Have done both suggestions, still not working. Could it have somehting to do with my local network? I am using a wireless Internet provided by my apartment building so not sure if apple tv and my computer are not technically on the same "local network?"
apple tv and main computer are connecting to Internet fine. Just cannot see my itunes on apple tv.
any other advice? My itunes is turned on to home sharing. i entered the same apple itunes account into aple tv. but appletv keeps saying my computer's home sharing is not turned on...but it is. -
Is it possible to have media files copied to a new location as you import them into a project?
I have roughly 800gb of footage i've taken over the past 2 years of traveling, and I am making a single video montage... The files are located on an external drive, making them slower to work with. I have a 1tb ssd but not enough free space to copy all the files to it for sorting. What i want to do is have the files copy over to the SSD as i add them to the project, so that only the footage i'm going to use gets copied over to the SSD. The only way i can determine if i am going to use the footage or not is to scrub through and mark Ins and Outs in premiere...
So i guess my question, in the simplest terms i can ask is, Is there a setting in Premiere, like the project manager tool which allows you to consolidate used media files to one destination, but one that will consolidate files as you add them to the project? or could i do this manually by repeatedly using the project manager tool to consolidate files periodically?
Hope that makes sense...
Oh, and yes, i have considered other methods to my madness, like reviewing the footage outside of premiere before deciding if i will use it or not, frankly, i have over 4000 pieces of footage and it's just much faster to scrub through them in premiere than to open each one in vlc to review. It's also much more convenient to mark my ins and outs as i review the footage, so premiere is my only option.
Thanks!You can easily (and better, IMHO) do what you want in Adobe Prelude. It's part of the CC subscription, and may have been included with CS6.
Open the Ingest panel, navigate to the external drive where you have your source clips, make the thumbnails in the Ingest panel comfortably large, click a video clip to enable scrubbing, and use the J-K-L keys to navigate playback through the clips. Put a check mark on the clips you want and be sure to select and set up the Transfer option on the right side of the panel before ingesting. Don't select the Transcode option.
Cheers,
Jeff -
There are two types of Backups that I can make for iDevice (for a example for iPhone - backup to iCloud or/and to the local PC/Mac.
Both are the current Backup, so my question is - Is it possible to save a several Backups of an exact iDevice, for example of iPhone (some history, but not the last one only)?ITunes keeps 1 backup file only.
Icloud keeps 3 backup files.
Maybe you are looking for
-
Only Essbase read access for a Planning App
A user needs access only to read data values from essbase for a planning application. Similar to "View User" in Planning roles except doesn't need access to Planning. How can this be achieved? Thanks
-
Purchase order not create in sus
Dear customizer, Ihave implemented a plan driven procurement with sus (r/3-sus) scenario,we have a problem when we transfer idoc from r/3 to sus.In sus sistem give me this error message "An error occured within an XI interface: Exception occurredE:BB
-
With the problems experienced with Itunes 7.7 - can I use Time Machine and restore the pre upgraded version? If so do I just find it and click restore? Any help appreciated.
-
Wrong File for Netweaver 2004s on SDN?
I have downloaded the Sneak Preview NetWeaver 2004's (ABAP - WebDynpro) for Windows. I wonder, it is a RAR-File and not a ZIP-File. I could not extract the file. I tested WinZIP and UnPacker. Otto-Jörg
-
User_cons_columns return no Result
Hi, I have created the table through following query CREATE TABLE Product P_Id char(6), P_Name varcahr2(15), P_Price Number CONSTRAINT Prduct_P_Id PRIMARY KEY (P_Id)Tablespace STORE; Table created successfully When I want to view constraint using fol