Possible bug with Notes (in Mail) with copy / paste

Has anyone else experienced this...
From time to time the copy / paste does not work properly. When I copy some text with command-c & place the insertion point at the end of line somewhere else in the document & press command-V, the text will be inserted in the line above.
I am not certain of the precise pattern to reproduce the bug, but try this...
1) Open an existing note document within mail...
2) Copy several lines of text & paste somewhere else in the document
3) Then type some text at the end of one of these lines
4) Highlight & copy that text
5) Move insertion point to the end of the next line
6) press command-v
7) Text does not get pasted to the right location, but to the line above
I running Lion 10.7.2
Thanks

No, each of the two subpanels calls a different VI. Try it!
"Satans Little Helper" wrote in message
news:[email protected]..
> Are both your subpanels calling the same VI that contains the 3D
> graph, or are you using two separate VI's? If your subpanels are
> sharing the same sub-VI, then that sub-VI should be made re-entrant
> executable.

Similar Messages

  • SendMail: can not send mail with body more than 1000 caracters

    Hi,
    I can not send mail with a body wich is more than 1000 caracters.
    FUNCTION SendMail(SMTPServerName IN STRING,                     
                        Sender IN STRING,                     
                        Recipient IN STRING,                     
                        CcRecipient IN STRING,                     
                        BccRecipient IN STRING,                     
                        Subject IN STRING,                     
                        Body IN STRING,                     
                        ErrorMessage OUT STRING,                     
                        Attachments IN ATTACHMENTS_LIST) RETURN NUMBER IS      
                        AttachmentList VARCHAR2(4000) := '';      
                        AttachmentTypeList VARCHAR2(2000) := '';   
                          BEGIN       ParseAttachment(Attachments,                      
                                                      AttachmentList);      
                                      RETURN JSendMail(SMTPServerName,
                                                       Sender,                       
                                                       Recipient,                       
                                                       CcRecipient,                       
                                                       BccRecipient,                       
                                                       Subject,                       
                                                       Body,                       
                                                       ErrorMessage,                       
                                                       AttachmentList); 

    Hi,
    I can not send mail with a body wich is more than 1000 caracters.
    FUNCTION SendMail(SMTPServerName IN STRING,                     
                        Sender IN STRING,                     
                        Recipient IN STRING,                     
                        CcRecipient IN STRING,                     
                        BccRecipient IN STRING,                     
                        Subject IN STRING,                     
                        Body IN STRING,                     
                        ErrorMessage OUT STRING,                     
                        Attachments IN ATTACHMENTS_LIST) RETURN NUMBER IS      
                        AttachmentList VARCHAR2(4000) := '';      
                        AttachmentTypeList VARCHAR2(2000) := '';   
                          BEGIN       ParseAttachment(Attachments,                      
                                                      AttachmentList);      
                                      RETURN JSendMail(SMTPServerName,
                                                       Sender,                       
                                                       Recipient,                       
                                                       CcRecipient,                       
                                                       BccRecipient,                       
                                                       Subject,                       
                                                       Body,                       
                                                       ErrorMessage,                       
                                                       AttachmentList); 

  • I`m trying to reset my icloud password but i`m not receiving mail with new password!

    I have to iphones one iphone 4 and 5s. This Apple ID is for my Iphone 5s but on my Iphone 4 i haveApple ID account. I want to delete that account because i want to sell that iphone, but i`m not able to erase all data due to wrong pasword.I`m trying to reset that password but i`m not receiving mail with my new password.
    Please help me
    Nikolche Taseski
    <Email Edited By Host>

    Nikolche wrote:
    .I want to delete that account because i want to sell that iphone,
    What to do before selling or giving away your iPhone, iPad, or iPod touch

  • Synchronizing Notes in IPhone with Notes in Mail

    Hi,
    is there a possibility to synchronize Notes in IPhone with my MacBook core duo 13.3 Leopard?
    Thanks for your help!
    Xiane

    Not available at this time...

  • Can I sync my Notes in Mail with my iPhone?

    Can I sync my Notes in Mail with my iPhone?

    Yes it will sync and if you have mobileme, over the air. But you can't write a note in Mail on the iPhone and sync over the air. Instead you get to write a new email instead. Go figure.

  • Gmail is not sending mail with files attached

    hey, apple mail serice is sending mail but not sending mail with files atteched.
    Any help?

    Hmm. Looking at the Apple UK support site, it shows a yellow dot for .Mac mail, but says the issue is with incoming mail:
    http://www.apple.com/uk/support/dotmac/
    Not sure if that has anything to do with it or if there are other issues.
    There's also some info at:
    http://www.apple.com/uk/support/dotmac/mail/
    Interestingly enough, they suggest using your ISP's SMTP server for outgoing mail:
    http://docs.info.apple.com/article.html?path=Dotmac/Mail/en/mac14.html
    Have you tried that? You should still be able to send as your .Mac email, but have it sent through there instead.

  • IPad will not receive mail with my new email address

    I changed my email address and provider 4 days ago and now my iPad 2 will not receive mail.

    Hi bethfost,
    This article provides basic troubleshooting step that can help you resolve the issue receiving emails on your iPad after switching to the new email service provider.
    Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
    So long,
    -Jason

  • Can not send mail with google account

    I have the Ipad in the 3G model but I am unable to send mail using my google account that is linked to it. If I was to go on the internet on it and send things through google it would let me but I need to be able to send attchments off the ipad so need to be able to use the mail app. I keep getting a message saying Cannont send mail the sender address was invalid. Please help

    I am having alot of trouble with my ipad(3G) and mail using gmail push set up using exchange server. It seems like every couple days it will not send mail and says unknown recepient or invalid. Then the next day it will work. I've deleted and set up the email account a few times. Same thing happens. If I just use a normal non push gmail account that works fine, but I'd like the gmail push to work. I have a strong wireless signal when this happens.
    Any ideas?
    thx
    lenn

  • Can not send mail with verizon email

    Please help me! I can not send mail useing my Verizon email. I can recieve but not send. I am not that savy so please help me!

    your outgoing mail should be:
    SMTP mail server:  outgoing.verizon.net
    you should have a password set
    SSL should be off
    authentication should be password
    server port 25

  • Possible Bug in Telnet and Mail?

    A few months ago I got an iMac and put it on my all-Linux LAN. For the most part, everything worked fine, but there were times, and now I think it's always been for a while after I rebooted my iMac, that I could not get email from the local POP3 server. When this happened, I'd try "telnet localpop 110" and I'd get this error message:
    Trying 0.0.0.0...
    telnet: connect to address 0.0.0.0: Connection refused
    telnet: Unable to connect to remote host
    It would eventually resolve itself and keep working. Since I tend not to reboot, it hasn't been a big issue, but it is a pain in the rear when it happens.
    Now I'm no longer using the local POP3 server and I get all my email for my domain from the mail server at my hosting company. Today I rebooted my iMac and now I can't get email from my POP3 server. When I saw that, I decided to test it out and tried:
    hal@imac:> telnet mail.mydomain.com 110
    Trying 0.0.0.0...
    telnet: connect to address 0.0.0.0: Connection refused
    telnet: Unable to connect to remote host
    hal@imac:> host mail.mydomain.com
    mail.mydomain.com is an alias for thresholddigital.com.
    mydomain.com has address xxx.xxx.xxx.xxx
    mydomain.com mail is handled by 10 mydomain.com.
    Notice when I use the host command, it finds the domain IP address (blocked here for my sanity), but telnet from the terminal cannot get the address and returns 0.0.0.0.
    I've seen this happen before. In a few hours it'll settle out and both Mail and telnet will be able to connect. But in the meanwhile, and staring a few hours after almost every reboot, I have to deal with this.
    Does Mail use telnet to access the mail servers? Why is there always this window when telnet cannot get an IP address that host (and ping) can? Is there some bug in telnet, or Mail or the OS?
    Any ideas on what is wrong here?
    Thank you!

    .. I see this same odd
    last output on many other systems running various
    versions of S9 and patchsets so I suspect that there
    is a bug in Sun's OpenSSH sshd, possibly dating
    to the initial inclusion of this package in Solaris 9.More information has turned up as I widened my search. On a system with Solaris 9 4/03 patched
    on 2004-08-09 (that's August, not September), my last(1) output is what I would normally expect:
    (drl@transit)10% uname -a
    SunOS transit 5.9 Generic_117171-07 sun4u sparc SUNW,UltraAX-i2
    (drl@transit)11% last -10 drl
    drl pts/1 jekyll.vuse.vand Mon Sep 13 16:25 still logged in
    drl pts/1 jekyll.vuse.vand Mon Sep 13 16:23 - 16:24 (00:01)
    drl pts/1 jekyll.vuse.vand Mon Sep 13 15:50 - 15:50 (00:00)
    drl pts/1 jekyll.vuse.vand Mon Sep 13 15:46 - 15:50 (00:03)
    drl pts/1 jekyll.vuse.vand Sun Aug 22 15:50 - 20:20 (04:30)
    drl pts/1 jekyll.vuse.vand Sat Aug 21 18:10 - 19:09 (00:59)
    drl pts/1 jekyll.vuse.vand Mon Aug 16 10:23 - 17:52 (07:28)
    drl pts/1 jekyll.vuse.vand Fri Aug 13 09:48 - 16:30 (06:41)
    drl pts/1 jekyll.vuse.vand Mon Aug 9 19:42 - 19:44 (00:02)
    drl pts/1 jekyll.vuse.vand Mon Aug 9 18:06 - 19:32 (01:26)
    Installation of the 2004-09-09 (that September, not August) 9_Recommended patchset causes
    this host to exhibit the same broken behavior as the more recently installed or patched hosts I
    first reported.
    Conclusion: this breakage comes from a patch introduced to the 9_Recommended set after 2004-08-09.
    Casual examination of the (3) differences between the 040909 and 040910 9_Recommended patchsets
    does not suggest that this has already been fixed.
    If it matters, I am a contract customer so I am using patchsets from the contract side of SunSolve.

  • Calling Javascripts with a panel then prevents copy/paste functions in Photoshop CS5

    Hi,
    I have a simple panel in Photoshop that calls a Javascript when a button is pressed.
    I have a simple script that does some Duplication of layers and a bit of simple image manipulation.
    I run the script from the Extended Toolkit and eveything works fine.
    I run the same script from the Panel and the script runs fine; but then the copy / Paste functionality of Photoshop is broken.
    I have to close the Panel window or run the script from the toolkit to get the functionality back.
    EDIT:  I have not narrowed this down to simple interations with the Panel can casue this issue - clicking on icons, switching `Tabs` etc...
    Does anyone know why this is happening?
    Cheers,
    Pete

    Hi,
    I created a simple panel that only had a button that calls an external JavaScript.
    Even if I simply click on the panel a few times, move it around etc without executing the script, I can get the copy paste error.  It happens 90% of the time and interestingly it only happens on the currently active document.
    The only way to get the functionality back is to close the panel.
    It seems to be a focus issue,  but as I'm not calling any script in this case - where could I put the Bridge Talk command? 

  • Will not allow me to copy, paste ect....

    will not allow me to copy from one document and then paste to another document

    Click on the drive, choose Get Info from the File menu, and check the format.
    If it's formatted as NTFS, reformat it as MS-DOS, exFAT, or Mac OS Extended (Journaled) as desired, or install software such as Paragon NTFS on the computer.
    If it's formatted as FAT32 or exFAT, use the Disk Utility's Repair Disk command on it; this may also happen for a flash drive which is about to fail.
    If it's formatted as Mac OS Extended, click Authenticate and provide your administrator password, or change the permissions on that specific folder in its Get Info window.
    (115546)

  • HT1752 I can not send mail with my powerbook g4 running tiger

    I can not send/receive mail using tiger 10.4.11.  Can anyone help?

    Hello Gerry, who is the Mail provider, the part after the @ sign?
    Plenty of problems of late with AT&t, Yahoo, and dot mac/MobileMe, but some possible fixes for the last one. *

  • Can not send mail with mac mail

    I see several other people are having a problem with outgoing mail using different servers. Mine was working until today and now get error message that it is trying to use smtp.mac instead of .comast as it is set up to do. This makes me think it has to be mac mail program that is the problem. Have tried changing out going server port to 587 to no avail. What next?

    This is most unlikely to have anything to do with the application, and reloading software will not fix, unless in the process you happen to change what probably needs to change.
    In Mail Preferences/Accounts/Account Information/Outgoing Server settings, remove all existing SMTP references, and re-enter the Comcast one, only, if that is what you wish to do. However, is it possible that something is amiss with the Comcast SMTP, and Mail is simply trying to use the smtp.mac.com as a fall back? Do you have any evidence that the Comcast SMTP is working?
    More info, please.
    Ernie

  • Sync Notes on Iphone with Notes in Mail?

    Is this possible? I don't seem to be able to get these to sync. Anyone done this or is this a future enhancement?

    I found this tip in Macworld magazine:
    "Sync Notes -- One of the major limitations of the iPhone’s Notes application is that you can’t sync it with data from any program on your Mac. There’s a workaround, however. Each contact has a notes field. So you can create a fake contact and paste any info you like in the notes field for that contact in Address Book. One sync later, all that information will be at your fingertips".
    As noted this workaround applies to 'contacts' on your iPhone. I was wondering if you could apply this principle to your problem?

Maybe you are looking for

  • Problem with duplicate and/or outlined fonts in Macintosh

    If you are using Frame for Macintosh and you find you have duplicate Arial and/or Times New Roman fonts, or, if these fonts show up on the screen as outlines, the problem may be that you have the 2.9x versions of these fonts, the latest as of this wr

  • No fact table exists at the requested level of detail Error.

    Hi Everybody, Facing a issue on the using  Fact less Fact tables. Scenario: ======== Using two subject areas to develop a report.OBIEE 11g Fact1 --> Compensation Plan Assignments Real Time Fact2 --> Participant Detail Real Time"."Participant Details

  • Module processor usage in File ADapter

    Hi all, I have a scenario  Idoc->Xi->File to be in Xi 3.0. There is already an XI 2.0 system up and running wherin they have used dispatcher classes for the File Adapter Configuration.They have used the Transform Class "com.sap.aii.messaging.adapter.

  • Possible to DECOMPOSE a fcp sequence like in AVID?

    A quick question.... How simple is it to decompose the video of a sequence and then re-digitize the material? I'm an Avid editor making the switch and I'm still a little hazy about fcp media management. If I load my project at lo-rez (offline photo j

  • Older but upgraded MBP running slow... no obvious cause.

    Hello all and thanks in advance for anything you have to share. My mid-2007 15" MBP has gotten slow in basic finder functions and opening/switching/closing programs with no obvious bottleneck.  I use Activity Monitor regularly, and there is often a v