Possible Compressor problem solved....

So, after noticing that qmaster was not listed in the running processes (and getting the dreaded, no cluster found in Compressor) I tried something very simple that seemed to work....I started "Apple Qmaster" under Applications. Behold...compressor works again!!! Try and see if it works on your computer! I believe the problem is, qmaster is not starting correctly when the computers starts up, and compressor can't seem to start it itself (which is dumb Apple, because I don't want qmaster running until I actually need it!)
Matthew

Sorry for not being clear. Remained idle = did not compress. No processor activity. No change of the progress bar in the Batch Monitor and no new file resulting from the expected activity. I did not check if Qmaster was running, will do so next time I submit.
As for the Qmaster files clogging /var/spool/qmaster, I did not use Terminal to remove them. There is an excellent post by scutdog here and I followed his advice. It helped in removing a job that was clogging the pipeline but the next job after it behaved the same way and I think I will give myself some rest now.
PowerMac G5 DP 2.7 Mac OS X (10.4.9) 3.5 Gb RAM, FCS2

Similar Messages

Dr.Watson problems solved.

DR.WATSON PROBLEMS SOLVED:
System:
WLS 5.1 with SP11 running on NT4 Using OCI817_8.
Oracle 7.3.4 running on NT4.
Problems:
Dr.Watson exceptions in native code...
# An EXCEPTION_ACCESS_VIOLATION exception has been detected in native code outside
the VM.
# Program counter=0x60239689
When asking BEA and Oracle:
"Use the latest OCI available. It is backward compatible !"
What have been done to solve the problem:
Going through all SQL code (and doing some rewriting), configuring connection
pools (TestOnReserve / TestOnRelease, refresh, etc) and several other configurations...
At last, we tried to change to the OCI version matching the Oracla versions we
were connecting to (from OCI817_8 to OCI734_7).
Voila ! NO MORE DR.WATSON EXCEPTIONS !
Our conclusion:
If possible, use the OCI version that matches the Oracle version you are running
on.

Hi Abhijit
Couple of pointers which could resolve the issue:
1. Since you are using the JDBC-ODBC bridge what occurs internally is that your JDBC API through the Virtual Machine make calls into the ODBC API on your Windows system. So the Watson error that you are getting is probably an illegal access by one of the methods in the ODBC API - this is for the Diagnosis part.
2. The Solution part -
a. Should I change my JDBC-ODBC driver? Not necessarily because the problems could be with the ODBC interface implementation and changing the driver might not help.
b. Should I change my programming style? This is one thing which could really help. The problem with creating connections each time is that it takes a lot of resources to do it, So there is a performance degradation. What you could do inyour code is use a Java Bean to create the required Connection. You can also think of using a prepared statement appropriately encapsulate it since you are invoking a particular query repeatedly. In your JSP page you can retrive(create) this bean through the jsp:useBean tag with the session as the scope attribute. The <jsp:setProperty methods could also be used to set the DSN name and the driver.
Once this bean is successfully created you have an open connection.
Now for the part you have pasted - replace the create connections with getting a new Statement object which would hold your Query. At the end of the JSP just close the Statement object.
Once you are done updating the page you may transfer the control to a different JSP - Let that transfer trigger the connection close in the Java bean.
This should solve the Dr.Watson problem.
Good Luck!
Eshwar Rao
Developer Technical Support
Sun microsystems inc
http://www.sun.com/developers/support

Problem solving expertise appreciated. What does a MacPro do in its initial booting phase?

My MacPro 3.1 (2008) with 20 Gb Ram does no longer want to boot. I checked the harddrive (startup disc), it is OK (my MacBook) boots from it. I checked the ram, it appears to be OK. When I push the power button the fan begins to work, red lights appear shortly on the RAM circuit boards and they go out again but then nothing happens. Monitor does not wake up, there is no start up chime, machine appear unresposive to any keyboard commands.
Anyone can tell what may be wrong, what the cause is why the MacPro does no longer want to boot and what could possibly be done about it?
So some Problem solving expertise and advice is higlhly appreciated. I really like to know what exactly does a MacPro do in its initial booting phase? Information that could bring life b to my well respected grand-old lady.

Conventional wisdom is that you get nowhere until you get the chime.
For that reason, the approved method is to remove everything that could possible be dragging down power and test the absolute minimum configuration, hoping to get the chime. Once it chimes, you slowly build it back up. adding one part at a time until you find something faulty or it "comes clean".
Disconnect AC power and remove:
graphics card
All other PCIe cards
All Hard drives
All Optical drives
All RAM -- then check for the power light blinking
next step is to restore one pair of DIMMs and try for the chime.
Then more DIMMs
Then graphics card, etc.

Basis System: 2 possible network problems detected - check tracefile

Hi Experts,
I have installed a a Netweaver 7.01 when i start the server throught MMC
first the dispatcher show the message as unable to reach teh message server
but where as message server is running successfully.
after few seconds it shows the status Stopped
Below is my trace please help me to solve this issue.
Thanks,
Veeru.
trc file: "dev_disp", trc level: 1, release: "700"
sysno      00
sid        NSP
systemid   560 (PC with Windows NT)
relno      7000
patchlevel 0
patchno    95
intno      20050900
make:      multithreaded, ASCII, optimized
pid        3892
Wed Jan 14 05:46:37 2009
kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3892) [dpxxdisp.c   1239]
     shared lib "dw_xml.dll" version 95 successfully loaded
     shared lib "dw_xtc.dll" version 95 successfully loaded
     shared lib "dw_stl.dll" version 95 successfully loaded
     shared lib "dw_gui.dll" version 95 successfully loaded
     shared lib "dw_mdm.dll" version 95 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Wed Jan 14 05:46:39 2009
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0121.qqq.nxst) took 2 seconds
Wed Jan 14 05:46:44 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5355]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >Veeru_NSP_00                            <
DpShMCreate: sizeof(wp_adm)          6328     (904)
DpShMCreate: sizeof(tm_adm)          3605136     (17936)
DpShMCreate: sizeof(wp_ca_adm)          1200     (60)
DpShMCreate: sizeof(appc_ca_adm)     1200     (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm)          528048     (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)          0     (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)          0     (72)
DpShMCreate: sizeof(vmc_adm)          0     (1280)
DpShMCreate: sizeof(wall_adm)          (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY          (addr: 04ED0040, size: 4205552)
DpShMCreate: allocated sys_adm at 04ED0040
DpShMCreate: allocated wp_adm at 04ED1A28
DpShMCreate: allocated tm_adm_list at 04ED32E0
DpShMCreate: allocated tm_adm at 04ED3310
DpShMCreate: allocated wp_ca_adm at 052435A0
DpShMCreate: allocated appc_ca_adm at 05243A50
DpShMCreate: allocated comm_adm at 05243F00
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 052C4DB0
DpShMCreate: allocated gw_adm at 052C4DF0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 052C4E20
DpShMCreate: allocated wall_adm at 052C4E28
MBUF state OFF
DpCommInitTable: init table for 500 entries
Wed Jan 14 05:46:50 2009
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Memory Reset disabled as NT default
ERROR => <EsNT> NTGetBaseAddress failed, no free region [esnti.c      1450]
Error 15 while initializing OS dependent part.
ERROR => DpEmInit: EmInit (1) [dpxxdisp.c   9556]
ERROR => DpMemInit: DpEmInit (-1) [dpxxdisp.c   9485]
DP_FATAL_ERROR => DpSapEnvInit: DpMemInit
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Jan 14 05:47:00 2009
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long)               Tue Jan 13 21:47:00 2009
========================
No Ty. Pid      Status Cause Start Err Sem CPU    Time Program Cl User         Action                    Table
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
0 ?         -1 Free          no      0   0             0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
1 ?         -1 Free          no      0   0             0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
2 ?         -1 Free          no      0   0             0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
3 ?         -1 Free          no      0   0             0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
4 ?         -1 Free          no      0   0             0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
5 ?         -1 Free          no      0   0             0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c     785]
6 ?         -1 Free          no      0   0             0
Dispatcher Queue Statistics               Tue Jan 13 21:47:00 2009
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
0
2000
0
0
--------++++--
+
DIA
0
0
2000
0
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id          0
wake_evt_udp_now     0
wake events           total     0, udp     0 ( 0%), shm     0 ( 0%)
since last update     total     0, udp     0 ( 0%), shm     0 ( 0%)
Dump of tm_adm structure:               Tue Jan 13 21:47:00 2009
=========================
Term    uid man user    term   lastop mod wp ta   a/i (modes)
Workprocess Comm. Area Blocks               Tue Jan 13 21:47:00 2009
=============================
Slots: 20, Used: 0, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Jan 14 05:47:05 2009
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >Veeru_NSP_00                            < (normal)
DpJ2eeDisableRestart
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Terminate gui connections
wait for end of work processes
not attached to the message server
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
Wed Jan 14 05:47:06 2009
***LOG Q05=> DpHalt, DPStop ( 3892) [dpxxdisp.c   10333]
Good Bye .....

Hi Eric,
Actually in my NSP_DVEBMS00_VEERU thePHYS_MEMSIZE is set to 128
So.....
Do i need to change in the here below file.....:
If yes wht shall i change it to ?
Template for ABAP SID_INSTANCE_HOST
SAPSYSTEMNAME = NSP
SAPGLOBALHOST = Veeru
SAPSYSTEM = 00
INSTANCE_NAME = DVEBMGS00
DIR_EXECUTABLE = C:\SAP\NSP\SYS\exe\run
DIR_CT_RUN = C:\SAP\NSP\SYS\exe\run
Instance runs without sapmnt saploc shares
DIR_INSTANCE = C:\SAP\NSP\DVEBMGS00
DIR_INSTALL = C:\SAP\NSP\SYS
DIR_HOME = $(DIR_INSTANCE)\work
DIR_GLOBAL = C:\SAP\NSP\SYS\global
PHYS_MEMSIZE = 128
rdisp/wp_no_dia = 3
rdisp/wp_no_btc = 1
icm/server_port_0 = PROT=HTTP,PORT=80$$
SAP Messaging Service parameters are set in the DEFAULT.PFL
ms/server_port_0 = PROT=HTTP,PORT=81$$
rdisp/wp_no_enq = 1
rdisp/wp_no_vb = 1
rdisp/wp_no_spo = 1
rdisp/enqname = Veeru_NSP_00
rdisp/myname = Veeru_NSP_00
abap/buffersize = 100000
alert/MONI_SEGM_SIZE = 0
enque/table_size = 2000
rspo/local_print/method = 2
rsdb/ntab/entrycount = 5000
rsdb/ntab/ftabsize = 3000
rsdb/ntab/sntabsize = 100
rsdb/ntab/irbdsize = 1000
rsdb/cua/buffersize = 500
rsdb/obj/buffersize = 2048
rsdb/obj/max_objects = 500
rsdb/otr/buffersize_kb = 1000
rsts/ccc/cachesize = 6000000
rtbb/buffer_length = 500
rtbb/max_tables = 50
sap/bufdir_entries = 200
zcsa/installed_languages = ED
zcsa/presentation_buffer_area = 350000
zcsa/calendar_area = 300000
zcsa/table_buffer_area = 3000000
zcsa/db_max_buftab = 500
ztta/roll_area = 1000000
ztta/diag_area = 128000
ztta/dynpro_area = 150000
ztta/cua_area = 250000
rdisp/PG_SHM = 100
rdisp/ROLL_SHM = 100
rdisp/autoabaptime = 0
rdisp/bufrefmode = sendoff,exeoff
rdisp/wp_ca_blk_no = 20
rdisp/appc_ca_blk_no = 20
rdisp/max_wprun_time = 300
icm/min_threads = 5
icm/max_threads = 10
icm/max_conn = 20
icm/host_name_full = localhost
mpi/total_size_MB = 10
auth/new_buffering = 1
sapgui/user_scripting = TRUE
ssf/name = SAPSECULIB
ssf/ssfapi_lib = $(DIR_CT_RUN)\sapsecu.dll
sec/libsapsecu = $(DIR_CT_RUN)\sapsecu.dll
login/create_sso2_ticket = 2
login/accept_sso2_ticket = 1
login/ticket_only_to_host = 1
rsdb/dbid = NSP
dbs/ada/schema = SAPNSP

Jerky Export - FCP or Compressor Problem?

I have a 20-second sequence using the maximum zoom in. The background trees swaying in the breeze are "bumpy" or seem to be dropping frames once exported and burned to DVD. It seems the video in full zoom can't keep up with them. Yet the scene looks fine when played in Final Cut Pro, which does not display any dropped frames or struggling to produce smooth video in this sequence. But once exported to Compression it gets rough in spots and gives the jumpy illusion of dropping frames.
Not sure if it's a FCP or Compressor problem. Any suggestions?

Translation problem on your end or ours?
Burn to DVD? You mean you encoded to MPEF2 for playback on a set top DVD or you burned your QT to a DVD? H-U-G-E difference.
MPEG2 hates that kind of detail and fine motion. Of course it's going to skip and jump unless you very carefully tweak the encoding settings. Very carefully. There are entire books written on how to do that, how to get the best possible compression. The defaults in Compressor just don't do it for you, they are strictly generic but totally applicable to 90% of what you throw at it.
bogiesan

Podcast Smart Playlist Problems (Disregard - Problem solved)

Problems solved. Is it possible to delete the post?
Message was edited by: ogman

Reagrding tracks being copied over again, I've seen another post in iPod Lounge where that person indicated the same thing. He stated that the play count was not being updated between the iPod and iTunes, but that the tracks were being copied over again. This sounds like a good explanation of this problem.
I have now noticed many of the tracks which I know I have played in the past show a "0" play count. Are the play counts kept in the iTunes library files (iTunes.xml and iTunes.itl)?
I always save the library files, so that when I reinstall iTunes I can just copy these 2 files back to their proper locations and I have my entire library intact - playlists and all. My music library is on a different drive.
Anyway, I KNOW I have played these tracks on the iPod, and yet they show unplayed on iTunes. This is probably another symptom of the re-copying tracks problem.

Logic Remote issues after updating to iOS 8, problem solved!

Has anyone else has been experiencing connectivity issues with Logic Remote after updating to iOS 8?
After updating to iOS 8 I could no longer connect so I sent a feedback report to Apple and got a response that cleared up my problem immediately:
Navigate to the following directory on your desktop system running GarageBand:
~/Library/Containers/com.apple.garageband10/Data/Library/Preferences/
You can quickly navigate there using the “Go” menu in Finder -> Go To Folder (shift-command-G), then copy this path:
~/Library/Containers/com.apple.garageband10/Data/Library/Preferences/
In the Preferences folder should be a file named "com.apple.garageband10.cs”.
Make sure GarageBand is not running and delete the "com.apple.garageband10.cs” file.
Relaunch GarageBand and see if you should now be able to connect.
The same can be done for Logic by navigating to:
~/Library/Preferences/
And deleting "com.apple.logic.pro.cs" and restarting Logic.
Note that doing this will fix Logic Remote connectivity issues (and possibly other problems with latency and mixer functionality) but will also delete any other Controller settings that you've configured with Logic, if you happen to be using another controller of some sort.

Note: Removing the CS (Controller Surface) plist is a part of the basic troubleshooting procedures for Logic Pro (and GB)
See section #8
Logic Pro X: Troubleshooting basics

I can not write in Hebrew And create effects It shows all distorted When This problem solved?

I can not write in Hebrew
And create effects
It shows all distorted
When This problem solved?

roeisarusi wrote:
When This problem solved?
Nobody knows. iWorks apps have always had bugs that make them unsuitable for Hebrew/Arabic for most people. Tell Apple here:
http://www.apple.com/feedback/keynote.html

How to problem solve adf issue in the mx340 model

how to problem solve adf issue in the mx340 model

Alex,
the missing thing in your example is the fact, that if only one value is selected, the parameter has exact this value like BOSTON. If you choose more than one value, the parameter includes the *'*, so that it looks like *'BOSTON','NEW YORK'*. So you need to check in the package, if there's a *,* in the parameter or not. If yes there's more than one value, if not it's only one value or it's null.
So change your package to (you need to expand your variables)
create or replace package bip_departments_2_parameters
as
p_dep_2_param varchar2(1000);
p_loc_1_param varchar2(1000);
p_where_clause varchar2(1000);
function beforereporttrigger
return boolean;
end bip_departments_2_parameters;
create or replace package body bip_departments_2_parameters
as
function beforereporttrigger
return boolean
is
l_return boolean := true;
begin
p_where_clause := ' ';
if p_dep_2_param is not null then
if instr(p_dep_2_param,',')>0 then
p_where_clause := 'WHERE DNAME in ('||p_dep_2_param||')';
else
p_where_clause := 'WHERE DNAME = '''||p_dep_2_param||'''';
end if;
if p_loc_1_param is not null then
if instr(p_loc_1_param,',')>0 then
p_where_clause := p_where_clause || ' AND LOC IN ('||p_loc_1_param||')';
else
p_where_clause := p_where_clause || ' AND LOC = '''||p_loc_1_param||'''';
end if;
end if;
else
if p_loc_1_param is not null then
if instr(p_loc_1_param,',')>0 then
p_where_clause := p_where_clause || 'WHERE LOC in ('||p_loc_1_param||')';
else
p_where_clause := p_where_clause || 'WHERE LOC = '''||p_loc_1_param||'''';
end if;
end if;
end if;
return (l_return);
end beforereporttrigger;
end bip_departments_2_parameters;
I've written a similar example at http://www.oracle.com/global/de/community/bip/tipps/Dynamische_Queries/index.html ... but it's in german.
Regards
Rainer

WiFi connection problem solved

My intel iMac and MBA had no problem but iPods 3g and 5g did. I had an old Netgear router connected and sitting next to my Airport Express. On a hunch I diconnected the Netgear and created a guest network to replace the one on the Netgear. PROBLEM SOLVED!
Evidently our iPods and boarder's iPhone had problems sorting out the signals and finding the right addresses. Moving the AE to a higher and slightly more central position also helped.
Jim

Same here on a Vodafone PocketWiFi 2.
Tried NetworkManager, wicd, wifi-menu but all have the same issue.
I recently installed Aptosid on another machine and it has the same problem... It also has kernel version 3.9.
All the live CDs I've tried work, even an Arch CD from May works, though a current install does not.
I have no problems connecting to another (wpa2 enterprise) network yet can't on this 3G modem.
I'm hoping this isn't a permanent issue and perhaps an update very soon will fix this.
It seems the only way to fix this for now is to use an old version of Linux. I'm currently running a virtual machine only for the purpose of Internet sharing, very annoying.

Bug fix for Mac book wireless - problem solved!

Aparantly there is a rather large number of folks out there who've discovered this dillema with wireless not working very well at this point on the Macbook.
Well, I can attest there is one very good solution out there for this issue. This application called Sonar Theater from www.sunray.tv includes a bug fix for the wireless connection issues with Macbook in their latest 1.5 release of Sonar Theater.
I downloaded it, put it into my start up folder and waalaa! problem solved. I've haven't any more issues with dropped wireless since - it's been running constantly for over 2 weeks now.
I haven't even attempted to touch my router configuration - don't need to.

Welcome to the better life of Macs. I am using Sonar Theater too and it's been working very well for me. In fact, I'm getting hooked on just texting a message to my Mac book to fire up user sessions now. I think if you give the Mac Book some time however, you'll find that there really is no comparison to PC's. Your life overall is going to just keep getting better as you dig in to the resources available to new Mac users.
I'm sure it seems confusing to PC users at first, but here's how to set up any application as part of your startup sequence. It really is extremely easy and simple compared to the PC world. Oh and by the way, in reality, Mac users refer to this as your login sequence. So, at login time, you can do a multitude of different things for each user account you might want to set up. Naturally, you can choose to share or not share applications and data between these user accounts on your Mac too....
Mac OS X 10.3 or later
1. Log in as the user who wishes to have a login item or as an admin user.
2. Choose System Preferences from the Apple menu.
3. Choose Accounts from the View menu.
4. Click the name of the user.
5. Click the Startup Items button
6. Click the "Add {+}" button.
The item you selected will automatically open the next time you log in.
there are several ways to get good info from the apple community on tips and tricks as well. you should just try the apple os x web site...here,
http://www.apple.com/macosx/resources/
happy mac-ing!

Mediawiki, mysql, php? problems [SOLVED]

On Sunday my Arch install that is hosted by Slicehost became unresponsive to them so they had to do an emergency reboot. After it came back up my install of mediawiki was (and still is) only returning a blank page (at least in Firefox). After some digging I found out that part of the problem was that mysqld wasn't starting so I managed to get that fixed by commenting out the lines relating to innodb and putting in skip-innodb into my.cnf. But I'm still getting a blank page.
According to Mediawiki's manual, "A blank white page indicates a PHP error which isn't being printed to the screen." They give two lines to put into LocalSettings.php to force error messages but after doing that I'm still getting a blank page. Changing display_errors in php.ini to ON didn't have any effect. When I load the wiki in Safari I get the following error: "Got java.io.EOFException (Server closed connection while sending the HTTP header.): http://some_url.com/mediawiki/index.php/Main_Page". I have no idea what this error means and googling java.io.EOFException doesn't bring up anything very helpful. My PHP Test Page indicates that PHP is up and running.
Any ideas on fixes or where I can find more clues?
[EDIT]
Mysql was definitely the root of the problems with Mediawiki. I tried nearly every suggestion listed in the forums for fixing a mysql install that wouldn't start but nothing worked. I even completely uninstalled mysql and reinstalled it but it still refused to start. I switched over to postgresql and switched mediawiki to run with that. Problem solved.
Last edited by k_odoma (2009-05-23 01:48:35)

There are some other things that must be done to connect to
the database
(such as passing the usernamee, password, and host info to
mysql_connect()
and storing the connection resource), and those might be in
the include
files. I generally place all of the connection parameters in
a separate file
that is located in a folder that can't be accessed by a
browser, for
security purposes.
Paul Swanson
Portland, Oregon, USA
"Amy Blankenship *AdobeCommunityExpert*"
<[email protected]>
wrote in message news:edk6ui$69c$[email protected]..
> What's in the include(s)?
>
> "83Dons" <[email protected]> wrote in
message
> news:edk5s5$4uk$[email protected]..
> > Here is the php code for the 'read' and 'write'
parts:
> >
> >
> >
> > <?php
> > include '......';
> > mysql_select_db('clinskills') or die("UNABLE TO
CONNECT TO
DATABASE");
> > $sql = "select A1Answer from authorware where id =
'13'";
> > $result = mysql_query($sql);
> > $answer1 = mysql_result($result,0,"A1Answer");
> > print $answer1;
> > ?>
> >
> > <?php
> > include '............';
> > mysql_select_db('clinskills') or die("UNABLE TO
CONNECT TO
DATABASE");
> > $newdata = $_GET['data'];
> > mysql_query("insert into authorware (A1Answer)
values('$newdata')")
or
> > die(mysql_error());
> > mysql_close(); ?>
> >
>
>

SAP-Basis System: 1 possible network problems detected - check tracefile

Dear Gurus,
I am getting this error in syslog in MMC for ECC 6.0 on windows with db2.
SAP-Basis System: > 1 possible network problems detected - check tracefile and adjust.
Regards
Rao.

hi,
can you look at this
[http://sapbasisnotes.blogspot.com/2009/05/sap-startup-problems-in-windows.html]
Regards,
Muralidhar

Acrobat printing problems (solved)

Hi Folk
I'm getting on well with Arch apart from one problem, I can not print from Acrobat reader, it accepts the command and does precisely nothing, the jobs are appearing in cups but not being printed, I can print from Open Office and test print from cups but no cooperation with acrobat, anyone have any ideas? thanks
Pete
Last edited by pete051 (2009-09-29 19:14:12)

I don't know what DE are you using. In my case, I use xfce and when acroread starts with his stupidity I just change the print command to 'xfprint'. That forces acroread to redirect the print job to xfce's printing frontend, and problem solved.
Now, if you're using kde, I guess there is something named 'kdeprint', 'kprint' or similar. For gnome, I've no idea.
I hope this helps.
p.s. Sometimes, cups takes his time to print. When its taking too long I purge cups' temp files and restart the daemon.
Last edited by kjon (2009-09-25 00:32:23)

Stuck with grub problem (SOLVED)

Today i tried to upgrade my Arch Linux, it downloaded everything that should be downloaded, it was installing upgrades but at the installing grub it stucks as like this
"Copying /boot/grub/grub.cfg.pacsave to /boot/grub/grub.cfg"
I've waited it for about 15 minutes, it didn't move on. So i did ctrl+z to break. Then i tried to update again. But it gives an error which is:
error: failed to commit transaction (conflicting files)
python: /usr/bin/2to3 exists in filesystem
Error occured, no packages were upgraded.
Please help me guys!
Last edited by bilgee0629 (2011-03-21 10:36:28)

Problem solved by moving 2to3 to other directory.

Possible Compressor problem solved....

Similar Messages

Maybe you are looking for