Possible conflict/problem if using edk 5.2.0 with plumtree portal 5-0-3 and collaboration v4.0.1?

Hi,
We are using plumtree portal v5-0-3 and collaboration v-4.0.1. I have to create a portlet where users can use it to submit a request for a collaboration project to be created. Searching through Plumtree Developer Center, there are documents that show me how to create a collaboration project using edk library. The edk that comes with plumtree portal v5-0-3 doesn't contain the api(s) that I need (for example, com.plumtree.remote.prc.collaboration.project.*). However, the edk 5.2.0 does contain these api(s).
Are there any possible conflicts/problems if I use the edk 5.2.0 with our existing plumtree portal v5-0-3 and collaboration v4.0.1? If there are, is there any other way that I could get to these api(s) somehow to create collaboration projects?
Thank you in advance for helping!

Thank you so much for responding so quickly!
Is there any api or way that I could use to create a collaboration project without using the Project Explorer? In our scenario, after a user uses the portlet that I describe earlier in the original disscussion message to request the creation of a project, an admin will take a look at the request and click a button to have the project created. This button will somehow trigger some scripts or codes instead of the admin using the Project Explorer to create the project.
Thanks again for your help!

Similar Messages

  • TS2570 doesn't work, still the same problem when using Rapidweaver software. NOT with other software.

    i tried everything in this article, but still have the same problem when using Rapidweaver software. NOT with other software. I am converting my iWeb site  to Rapidweaver, whenever there is a calmer period in my office. I have 16 Gb RAM on my NEW iMac and have Parallels desktop, mail, safari, iWeb and Rapidweaver running simultanious.
    I never have the problem if i don't use Rapidweaver, but after i have added several pages to Rapidweaver, the problem begins. my iMac won't start up. the only thing that works is re-installing Macos OS X 10.8. i tried even whiping the completeharddrive, and reinstalling with a complete new user, the same problem.
    I had it on my previous iMac also, and bought a new one because i thought the problem was in the iMac first. i hadn't noticed it only happens with using rapidweaver.
    i sent my complete rapidweaver project to the programmers from rapidweaver at Realmacsoftware, but they couldnt reproduce my problem, there macs started up without any problem.
    i deleted all the rapidweaver addons and extra stacks, and started a complete new project.
    saterday i had the problem again, after adding about 5 new pages to my rapidweaver site.
    i think i have reinstalled Macos OS X 10.8.2 20 or 30 times by now
    does anyone have a sollution?

    Type '''about:support''' in the URL bar and hit Enter.
    Scroll down almost to the bottom of that listing and see if you have '''user.js Preferences''' just above the '''''Graphics''''' category.
    If you do have that, click on '''user.js file''' in this sentence. <br />
    ''Your profile folder contains a user.js file, which includes preferences that were not created by Firefox.''
    Does that "different homepage" appear in that user.js file?

  • The problem of using timer in long windows with scroll bar

    Hello everybody!
    There is a problem of using timer in windows with scrolling. Lies in the fact that at the moment of the trigger "when-timer-expired", is "jumping" on the active field in the form (where the cursor). If the user scrolls at this moment unscrewed to view another location below, or higher, then it will then "jump" from the viewing area.
    I tried to fix the problem by replacing the timer in Forms, a timer in the JavaBean.
    It did not help. At the moment of the trigger WHEN-CUSTOM-ITEM-EVENT of JavaBean, anyway there is a jump.
    I have not a few forms, but only one form. With one long window.
    I use Oracle Forms 10.1.2.3.
    The forum discussing this problem. But it has not been resolved, I think. It is also proposed to destroy and recreate the timer at the transition between the forms. But the form I have just one!
    Has anyone encountered this problem? What are the solutions?

    CraigB wrote:
    Could you explain the overall affect you are going for? Perhaps if we knew what you were trying to achieve we could offer potential solutions that don't involve using a Timer or perhaps a differnt way to use the Timer.
    Craig...No.
    In different tasks, different purpose of timer. Can I use the timer without jumps?

  • Error "printhead problem please use setup cartidge that came with the printer"

    Hi, I have purchased a HP Deskjet 5525 All in one printer, it was working perfectly till 1 year, then i had not used it about 6 months, now when tried to use it again then it was throwing the error "Printhead is damaged, missing, not installed properly or damaged etc...",  then i cleaned the printhead and reinstalled it in printer then i inserted the cartidge now its generating the error "please use setup cartidge that came with printer" but among the setup cardige "yellow", "magenta", "Cyan" is accessible  by printer but when i use the black then it says "properly not installed, missing cartidge".
    So please tell me  do i need to purchase a new black cartidge, will it work? or what shoud i do ?
    cartidge NO- 685
    Thanks
    Nirmal

    Hi @nirmal007,
    Welcome to the HP Support Forum!  I understand you're having cartridge issues with your HP Deskjet Ink Advantage 5525 e-All-in-One Printer.  I would like to assist you with clearing up that error state and have some troubleshooting steps that may resolve the issue. 
    I recommend you try the following steps before you consider purchasing a new black ink cartridge.  Firstly after you've confirmed that your ink levels are not the problem (example - the level is above 10%), try a 'hard reset':
    Secondly:
    Make sure that the ink cartridges are properly vented and seated correctly
    If the vent on the top of the ink cartridge is clogged or obstructed, the ink cartridge might not work properly. Follow these steps to make sure that the ink cartridges are properly vented and seated correctly.
    Press the Power button to turn on the printer, if it is not already turned on. Wait until the printer is idle and silent before continuing.
    Open the cartridge access door. The carriage moves to the access area.
    Figure : Open the cartridge access door
    Press the tab on the front of the cartridge inward to release it, and then pull up on the cartridge to remove it from the slot.
    Figure : Remove the cartridge from the slot
    Examine the vent area on each cartridge, above the HP logo on the top of the cartridge.
    Figure : Vent area on the top of the cartridge
    If the cartridge still has the orange pull-tab attached, pull to remove it.
    Figure : Orange pull tab
    If the vent is clogged, use a straight pin to gently remove excess adhesive from the vent.
    Figure : Clean the clogged vent with a pin
    Clogged vent
    With a straight pin, gently remove excess adhesive from the vent
    Unclogged vent
    With the nozzle and contacts facing down, slide the cartridge into its slot. Press down on the cartridge until it clicks into place.
     note:Make sure that each cartridge is installed in the correct slot. Match the shape of the icon and the color of the cartridge with the slot that has the same shaped icon and color.
    Figure : Reinsert the cartridge
    Repeat these steps to inspect the vents on each of the cartridges.
    Make sure that each cartridge is firmly in place in its slot. Run your finger along the top of the cartridges to feel for any that are protruding, and if any are, press down firmly until each cartridge snaps into place.
    Close the cartridge access door.
    Figure : Close the cartridge access door
    Source
    Thirdly, try cleaning your cartridge contacts:
    Manually cleaning the print cartridge contacts
    Follow the steps below to manually clean the print cartridge contacts:
    Gather the following items to clean the contacts:
    Distilled water (tap water may contain contaminants that can damage the print cartridge)
    Cotton swabs or other soft, lint-free material that will not stick to the print cartridge
    Open the print cartridge door.
    Remove the print cartridge and place it on a piece of paper with the ink nozzle plate facing up.
     caution:
    Do not to touch the copper-colored contacts or the ink nozzle plate with your fingersFigure : Do not touch copper-colored contacts
     caution:Do not leave the print cartridge outside the printer for more than 30 minutes. Ink nozzles exposed to the air longer than this may dry out and cause printing problems.
    Lightly moisten a cotton swab with distilled water and squeeze any excess water from the swab.
    Gently wipe the copper-colored contacts with the cotton swab.
     caution:Do not touch the ink nozzle plate. Touching the ink nozzle plate will result in clogs, ink failure, and bad electrical connections.
    Repeat steps 4 and 5 until no ink residue or dust appears on a clean swab.
    Insert the print cartridge in the printer, and then close the print cartridge door.
    Source
    If you've tried all of the above noted steps and you're still unable to use the black cartridge, you may need to pick up a new one.  Let me know if this helps.  Best of luck! 
    E-roq
    I work on behalf of HP.
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Problem when using templates in report 6i with xml defination

    Iam trying to generate a report through xml defination , and iam including the template
    in the xml . but when i include a user parameter in the template and try to map that UI parameter as f_1 in margin (you can look in object navigator) and run the report through xml then report is hanging, But it works fine when i add the template to the rdf . I doesn't when i include that tdf in the xml and run it. can any one solve this problem.
    manks
    null

    In the template you should change both the font for headings and for data.
    Those are 2 different section in the template.

  • I have a problem when using Google Maps, at some point my computer blanks the window and says there's a problem with display drivers, and it has recovered,but it doesn't. Problem doesn't happen with Int Explorrer, so I do not believe it is the computer

    When using google maps through Firefox, after asking for a place which is not the general North America section which routinely comes up, the firefox screen goes white, with a narrow banner at the top. A message appears in the lower right corner which says something about display drivers having had a problem, but now have recovered. However the display doesn't recover and the banner message is that Firefox is not responding. When I go to restart Firefox if I go to the restore point, the page is still frozen out.
    I do not believe it is a problem with my computer because it doesn't happen if I use I.E. to go to google maps, then G-maps works normally.
    This phenomenon did not happen before the latest upgrade to either Google or Firefox. I have used Fiefox for a number of years and also Google Maps on previous computers and on this one, and not had this before.
    This is a relatively young computer (Asus EeSlate 121) less than a year old. I have used Firefox since I bought it and until recently had no problem with Google Maps.

    I solved it myself, after the "note" which came back from FF/Mozilla just as I finished my message, commenting on what it was that my system had , I wnnt back to check my plug-ins etc. I downloaded the latest Java, BOTH 32bit AND 64 bit versions and latest Firefox.
    Now all is working.
    Thanks,
    B.

  • Startup problem after use in target disk mode with a PC. Ideas?

    I used my Mac 10.4 in traget disk mode. Data transfers between Mac and PC worked fine (via Macdrive 6). After disconnecting and trying to boot normally, Mac doesn't recognize internal volume. It flashes the question mark.
    Tried to repair disk via install DVD - disk utility found no problems.
    Reapired permissons.
    Reset PRAM and NVRAM.
    Tried Startup utility - found the internal volume and even after selecting it for startup, I still get the flashing question mark.
    Apple hardware test found no problems.
    Archive and reinstall is not allowed.
    Data can still be accessed fine via target disk mode.
    Any ideas how to reinitialize or reset the startup volume?
    Powerbook G4   Mac OS X (10.4.8)  

    Hello,
    You need to put the Tiger Install Disc in the 2011 iMac, boot the 2011 uMac into Target mode...
    http://support.apple.com/kb/HT1661
    Boot the G4 holding the Option or alt key, hopefully the Install Disc in the 2011 iMac will show as a boot choice.
    We just want to use the 2011 iMac as a big expensive FW Optical drive, it cannot be installed osing the 2011 iMac itself.

  • Page layout problem when using more than 3 iviews(with Tab Strip controls)

    Hello Experts,
    I am using MS Visual Studio 2005 and PDK 2.5 for .net.
    I have created four iViews where two iViews are having TabStrip control which are dynamically added to iView.
    When I add iViews to the page and view page  ,I am not able to see the content of iViews having TabsStrip controls.
    But I can see contents with individual iView.I am using 3 columns layout for this scenario.
    I have tried all possible layouts available in EP.
    How should I placed iViews in page so that contents of iviews having Tabsrtip control will be displayed.
    Any help appreciated
    Regards
    Sunil Pawar

    Hi Sunil,
              Try changing the isolation property of iView to URL(Isolated) from Embedded-->Save .Now assign these iViews to the page.
    For more info,
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/97/0be13dc2fd605ae10000000a11405a/content.htm">Isolation Property</a>
    Regards,
    Vinoth.M

  • JDBC Driver problem when using JDeveloper 10.1.2 with JDK 1.4

    I hope someone can help me solve this problem (which I am sure others have encountered).
    The JDK that is downloaded together with JDeveloper 10.1.2 is JDK 1.4.2. However, I believe the JDBC jar files that comes together with JDeveloper 10.1.2 are for JDK 1.2 : classes12.jar, classes12dms.jar and nls_charset12.
    What I did was I replaced the JDeveloper 10.1.2 JDBC (JDK 1.2) jar files with the JDBC jar files from JDeveloper 10.1.3 download i.e. ocrs12.jar, ojdbc14.jar, ojdbc14dms.jar and orai18n.jar and then create a new JDBC Library which references these new jar files. I was able to successfully run my applications (under my modified JDeveloper 10.1.2) using this new JDBC library (instead of the original 'Oracle JDBC' library). However, when I created a Database Connection in this modified JDeveloper 10.1.2, the connection was unsuccessful. I received the error message "Unable to find driver: oracle.jdbc.driver.OracleDriver".
    My organisation requires me to use JDK 1.4.2 and therefore I cannot use JDeveloper 10.1.3 (which I did not encounter any JDBC problem) as it is certified to run only on JDK 1.5.
    Please help. Thanks.

    JDev 10.1.2 is quite old, and was never certified for Windows 2008.
    No need to post multiple threads - same question as {thread:id=2271522}

  • Airport Express Problems when using Apple 27 " cinema display with Macbook

    I have recently got an apple cinema 27" display and when I connect it to my macbook and wake the computer up I cannot connect to the airport network. I can connect to wlan-ap, whatever that is, but my wifi barely sees my network. When I re-awaken the computer in normal mode, without he cinema display, the network can be connected to easily. Also, when I run the airport utility while using the cinema screen, you cannot see the airport express, but without the screen, you can.
    This is a weird wifi problem,=.
    Any help is appreciated.
    H

    This is known to happen:
    http://docs.info.apple.com/article.html?artnum=58543
    Try a different broadcast channel on the wireless router.

  • Is it possible to create indexes & use them on xml docs with namespaces?

    I have put an XML doc in a BDBXML container which looks like this:
    *<ns1:note xmlns:ns1="http://www.testsch.org/ns">*
    *<ns1:to>Eric</ns1:to>*
    *<ns1:from>Brendan</ns1:from>*
    *<ns1:msg>How r u?</ns1:msg>*
    *</ns1:note>*
    Now, I am creating an index on the element "to", as:
    addIndex "ns1" "to" node-element-equality-string
    Though the index has been shown as getting created using the listIndexes command, if I lookup that index with the following command:
    lookupIndex node-element-equality-string "ns1" "to"
    the output is:
    *0 objects returned for eager index lookup 'node-element-equality-string'*
    Whereas, if I do the whole procedure without the namespaces in the document & the commands, the result is fine:
    *1 object returned for eager index lookup 'node-element-equality-string'*
    Can someone please tell me whether using namespaces, the indexes can be created or not? If yes, how?
    Thanks,
    Dev
    Edited by: user11871332 on Sep 7, 2009 3:53 PM

    Hi Dev,
    When using XML, the prefix for the namespace is really just syntactic sugar. The actual namespace in your example is "http://www.testsch.org/ns", and that's the value that you need to use when creating your index:
    addIndex "http://www.testsch.org/ns" "to" node-element-equality-stringJohn

  • Created an image using Apple 10.6.5 with Acrobat Pro 9.4.1 and CS 5

    Greetings All.  Have a Happy, Healty New Year.
    As I open Acrobat Pro I am instructed to open Photoshop (or other App) first, which I did.
    Again I opened Acrobat Pro and rec'v message stating Acrobat Pro was installed as part of a suite and in order to enable Acrobat Pro
    I must open another CS 5 app. After closing the message Acrobat closes.
    Acrobat Pro was set up earlier with the CS 4 suite and upgraded as we go.
    Our CS 5 purchase did not include Acrobat Pro.
    Is there a workaround for this or do I need to uninstall 9 and install 10.
    Would prefer keeping 9.4.1 for now.
    Thanx
    ...mhu

    So Adobe-ites,
    here is the answer - when Acrobat 9.4 was installed it was installed with CS4. When readying to install CS5, 4 was uninstalled completely.
    I had to re-install any CS4 app., 9.4 recognizes it and problem was solved. 9.4.1 works just fine.
    thanx
    ...mhu

  • Hello I just bought my new iphone4s but theres a problem sending pictures on imessage , also cheked with my friends on the settings and has the same , what problem could be

    the problem still has no solution I have great coverage and also i can send and receive on imessage but i can receive pictures but cant send them what can be the issue

    Here is a great apple article for troubleshooting message issues.

  • I was using iPhoto 8.1.2 with Snow Leopard (10.6.x) and it worked perfectly.

    perfectly.  I upgraded to Mtn Lion (10.8.x) and iphoto 8.1.2 won't open. What steps do I follow to fix the problem?

    What exactly happens?
    A general solution is iBack up your iPhoto library, Depress the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library
    LN

  • Impossible to use "Connect to Data/Service" with BlazeDS

    Hi everybody, I'm work on FB4 since 3 weeks, but I have big problem to use "Connect to Data/Service" with BlazeDS.  each time I try to use it, it's the same question " You must define a BlazeDS server" and when I define the BlazeDS server and .war, I have the question again... You must define a BlazeDS server
    I work on Mac OsX Leopard and his java 6.
    Thanks for your help

    Hi,
    Thanks for your feedback
    Can you please tell us which version of Flash Builder4 and BlazeDS you are using.?
    Also, can you try the same workflow by using the turnkey version of BlazeDS(4.0.0.11428) with Flash Builder BETA2 build.
    Please let us know the outcome.
    Thanks,
    Balaji
    http://balajisridhar.wordpress.com

Maybe you are looking for