Possible Corruption in Logic Preferences?

Hey guys
This is my first question on this forum. There may be more to come. I've been reading through these pages for the last couple weeks and have found it extremely helpful. Great work to all the contributors.
The problem I have encountered with Logic is happening with both new and old sessions. When I import Wav or AIFF into logic (dragging and dropping from Finder into the Arrange window). I can only hear play back on every other audio track. In other words track one and three have sound but track two and four don't. And on down the line there is sound only on every other audio track.
I use a customized autoload. When I created a new song by holding option and selecting File/New. I received playback on all tracks.
So I could always rebuild autoload and start over. But I have quiet a few projects that are currently unfinished...Any suggestions on how I can rescue them?
I use Logic 7.2 on a new Mac Pro Quad
Thanks again for running a great forum.
James
Mac Pro

Hi James,
By your description, it sounds like Universal Track Mode has been disabled.
Go to Audio Hardware and Drivers (under the main Audio menu), and make sure UTM is checked.
See if that's it...

Similar Messages

How to resolve corruption in logical model?

Hello
I have a logical model created in SDDM 3.1.2.704. I have engineered to a relational model successfully in the past, but recently when I tried to engineer logical -> relational nothing happens. I get the following entry in the log file:
[AWT-EventQueue-0] ERROR MDBAction - java.lang.NullPointerException
Looking at some other discussions, I used the transformation script described here
3.1.3.709: How to Verify and Fix a Possibly Corrupted Design?
This didn't fix my problem, but the output file (generated when I press the Engineer to Relational model button) shows the following exception:
java.lang.NullPointerException
at oracle.dbtools.crest.model.design.engineering.EngCOPropertiesComparator.decodeDataTypeKindToString(Unknown Source)
at oracle.dbtools.crest.model.design.engineering.EngCOPropertiesComparator.processDataTypeAndUse(Unknown Source)
at oracle.dbtools.crest.model.design.engineering.EngCOPropertiesComparator.initPropertiesList(Unknown Source)
at oracle.dbtools.crest.model.design.engineering.AttributeColumnComparator.initPropertiesList(Unknown Source)
at oracle.dbtools.crest.model.design.engineering.AttributeColumnComparator.<init>(Unknown Source)
at oracle.dbtools.crest.model.design.engineering.AttributeColumnComparator.<init>(Unknown Source)
at oracle.dbtools.crest.model.design.engineering.FE_LogicalToRelational.addAttribute(Unknown Source)
at oracle.dbtools.crest.model.design.engineering.FE_LogicalToRelational.addEntityDetails(Unknown Source)
at oracle.dbtools.crest.model.design.engineering.FE_LogicalToRelational.setEditableStatus(Unknown Source)
at oracle.dbtools.crest.model.design.engineering.FE_LogicalToRelational.addEntity(Unknown Source)
at oracle.dbtools.crest.model.design.engineering.FE_LogicalToRelational.addFromLogicalModel(Unknown Source)
at oracle.dbtools.crest.model.design.engineering.FE_LogicalToRelational.<init>(Unknown Source)
at oracle.dbtools.crest.swingui.engineeringcompare.EngineeringCompareDialog.<init>(Unknown Source)
at oracle.dbtools.crest.swingui.logical.ControllerLogical$FWDEngineer.doActionPerformed(Unknown Source)
at oracle.dbtools.crest.swingui.MDBAction$ActionInvoker.run(Unknown Source)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:642)
at java.awt.EventQueue.access$000(EventQueue.java:85)
at java.awt.EventQueue$1.run(EventQueue.java:603)
at java.awt.EventQueue$1.run(EventQueue.java:601)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:612)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
I have tried SDDM 3.3.0.747, same result.
I have tried removing entities from the model, 1 at a time, but the problems continues (even when the model is reduced to no entities at all!)
I have tried exporting the model and importing it into an empty design. The import fails "Unable to generate design" and produces the following exception in the datamodeler.log file:
[Thread-19] ERROR ODExtractionController - Error Generate Design: Untitled_1
java.lang.NullPointerException
at oracle.dbtools.crest.model.design.engineering.EngCOPropertiesComparator.decodeDataTypeKindToString(Unknown Source)
at oracle.dbtools.crest.model.design.engineering.EngCOPropertiesComparator.processDataTypeAndUse(Unknown Source)
at oracle.dbtools.crest.model.design.compare.COPropertiesComparator.initPropertiesList(Unknown Source)
at oracle.dbtools.crest.model.design.compare.cwddesign.AttributeComparator.initPropertiesList(Unknown Source)
at oracle.dbtools.crest.model.design.compare.cwddesign.AttributeComparator.<init>(Unknown Source)
at oracle.dbtools.crest.model.design.compare.cwddesign.CompareCWDDesigns.addAttribute(Unknown Source)
at oracle.dbtools.crest.model.design.compare.cwddesign.CompareCWDDesigns.addEntityDetails(Unknown Source)
at oracle.dbtools.crest.model.design.compare.cwddesign.CompareCWDDesigns.addEntity(Unknown Source)
at oracle.dbtools.crest.model.design.compare.cwddesign.CompareCWDDesigns.initSourceDesign(Unknown Source)
at oracle.dbtools.crest.model.design.compare.cwddesign.CompareCWDDesigns.<init>(Unknown Source)
at oracle.dbtools.crest.swingui.compare.cwddesign.CompareCWDDesignsDialog.<init>(Unknown Source)
at oracle.dbtools.crest.imports.cwddesigner.CWDExtractionController$Runner2.run(Unknown Source)
at java.lang.Thread.run(Thread.java:662)
Any help greatly appreciated. With over 100 entities and 200 relationships I really don't want to have to recreate this.
Thanks in advance.

Hi,
but the problems continues (even when the model is reduced to no entities at all!)
The error you reported (in engineering and import) cannot be reached if there are no entities and attributes - it's a specific error probably related to usage of distinct types that are removed from design.
You can use search functionality in order to find attributes/columns (logical/relational model) with incorrect data type definition based on distinct type.
And it's better to move to Data Modeler 4.0 (833).
So what to search (example is on logical model - it's the same for relational model - column):
1) Activate search window (CTRL-F when logical diagram is active, or Find icon), switch to advanced mode
2) for "Object type" Attribute:
- check "Data Type kind" line and put DT as search text
- check "Distinct type" line, don't put search text - it'll search for attributes without distinct type
- change the operand for expression from OR to AND
3) press "Find" button
If you find some attributes, then you need to decide what to do with them - to set data type or to delete them.
The same for columns in relational model.
Philip

Oracle 9i clob segment possible corruption

Hello all,
We are experiencing some select issues from a table containing a CLOB segment. Since I don't know too much about CLOBs and we are suspecting a possible corruption. What would be the next step besides a DBV on the datafile housing hat table?
I have read that there is a package called DBMS_LOB ... but not sure how to use
Much appreciated

Corruption? logical or physical?
SQL> desc dbms_lob
PROCEDURE APPEND
Argument Name               Type               In/Out Default?
DEST_LOB               BLOB               IN/OUT
SRC_LOB               BLOB               IN
PROCEDURE APPEND
Argument Name               Type               In/Out Default?
DEST_LOB               CLOB               IN/OUT
SRC_LOB               CLOB               IN
PROCEDURE CLOSE
Argument Name               Type               In/Out Default?
LOB_LOC               BLOB               IN/OUT
PROCEDURE CLOSE
Argument Name               Type               In/Out Default?
LOB_LOC               CLOB               IN/OUT
PROCEDURE CLOSE
Argument Name               Type               In/Out Default?
FILE_LOC               BINARY FILE LOB      IN/OUT
FUNCTION COMPARE RETURNS NUMBER(38)
Argument Name               Type               In/Out Default?
LOB_1                    BLOB               IN
LOB_2                    BLOB               IN
AMOUNT                NUMBER(38)          IN     DEFAULT
OFFSET_1               NUMBER(38)          IN     DEFAULT
OFFSET_2               NUMBER(38)          IN     DEFAULT
FUNCTION COMPARE RETURNS NUMBER(38)
Argument Name               Type               In/Out Default?
LOB_1                    CLOB               IN
LOB_2                    CLOB               IN
AMOUNT                NUMBER(38)          IN     DEFAULT
OFFSET_1               NUMBER(38)          IN     DEFAULT
OFFSET_2               NUMBER(38)          IN     DEFAULT
FUNCTION COMPARE RETURNS NUMBER(38)
Argument Name               Type               In/Out Default?
FILE_1                BINARY FILE LOB      IN
FILE_2                BINARY FILE LOB      IN
AMOUNT                NUMBER(38)          IN
OFFSET_1               NUMBER(38)          IN     DEFAULT
OFFSET_2               NUMBER(38)          IN     DEFAULT
PROCEDURE CONVERTTOBLOB
Argument Name               Type               In/Out Default?
DEST_LOB               BLOB               IN/OUT
SRC_CLOB               CLOB               IN
AMOUNT                NUMBER(38)          IN
DEST_OFFSET               NUMBER(38)          IN/OUT
SRC_OFFSET               NUMBER(38)          IN/OUT
BLOB_CSID               NUMBER               IN
LANG_CONTEXT               NUMBER(38)          IN/OUT
WARNING               NUMBER(38)          OUT
PROCEDURE CONVERTTOCLOB
Argument Name               Type               In/Out Default?
DEST_LOB               CLOB               IN/OUT
SRC_BLOB               BLOB               IN
AMOUNT                NUMBER(38)          IN
DEST_OFFSET               NUMBER(38)          IN/OUT
SRC_OFFSET               NUMBER(38)          IN/OUT
BLOB_CSID               NUMBER               IN
LANG_CONTEXT               NUMBER(38)          IN/OUT
WARNING               NUMBER(38)          OUT
PROCEDURE COPY
Argument Name               Type               In/Out Default?
DEST_LOB               BLOB               IN/OUT
SRC_LOB               BLOB               IN
AMOUNT                NUMBER(38)          IN
DEST_OFFSET               NUMBER(38)          IN     DEFAULT
SRC_OFFSET               NUMBER(38)          IN     DEFAULT
PROCEDURE COPY
Argument Name               Type               In/Out Default?
DEST_LOB               CLOB               IN/OUT
SRC_LOB               CLOB               IN
AMOUNT                NUMBER(38)          IN
DEST_OFFSET               NUMBER(38)          IN     DEFAULT
SRC_OFFSET               NUMBER(38)          IN     DEFAULT
PROCEDURE CREATETEMPORARY
Argument Name               Type               In/Out Default?
LOB_LOC               BLOB               IN/OUT
CACHE                    BOOLEAN           IN
DUR                    BINARY_INTEGER          IN     DEFAULT
PROCEDURE CREATETEMPORARY
Argument Name               Type               In/Out Default?
LOB_LOC               CLOB               IN/OUT
CACHE                    BOOLEAN           IN
DUR                    BINARY_INTEGER          IN     DEFAULT
PROCEDURE ERASE
Argument Name               Type               In/Out Default?
LOB_LOC               BLOB               IN/OUT
AMOUNT                NUMBER(38)          IN/OUT
OFFSET                NUMBER(38)          IN     DEFAULT
PROCEDURE ERASE
Argument Name               Type               In/Out Default?
LOB_LOC               CLOB               IN/OUT
AMOUNT                NUMBER(38)          IN/OUT
OFFSET                NUMBER(38)          IN     DEFAULT
PROCEDURE FILECLOSE
Argument Name               Type               In/Out Default?
FILE_LOC               BINARY FILE LOB      IN/OUT
PROCEDURE FILECLOSEALL
FUNCTION FILEEXISTS RETURNS NUMBER(38)
Argument Name               Type               In/Out Default?
FILE_LOC               BINARY FILE LOB      IN
PROCEDURE FILEGETNAME
Argument Name               Type               In/Out Default?
FILE_LOC               BINARY FILE LOB      IN
DIR_ALIAS               VARCHAR2          OUT
FILENAME               VARCHAR2          OUT
FUNCTION FILEISOPEN RETURNS NUMBER(38)
Argument Name               Type               In/Out Default?
FILE_LOC               BINARY FILE LOB      IN
PROCEDURE FILEOPEN
Argument Name               Type               In/Out Default?
FILE_LOC               BINARY FILE LOB      IN/OUT
OPEN_MODE               BINARY_INTEGER          IN     DEFAULT
PROCEDURE FREETEMPORARY
Argument Name               Type               In/Out Default?
LOB_LOC               BLOB               IN/OUT
PROCEDURE FREETEMPORARY
Argument Name               Type               In/Out Default?
LOB_LOC               CLOB               IN/OUT
FUNCTION GETCHUNKSIZE RETURNS NUMBER(38)
Argument Name               Type               In/Out Default?
LOB_LOC               BLOB               IN
FUNCTION GETCHUNKSIZE RETURNS NUMBER(38)
Argument Name               Type               In/Out Default?
LOB_LOC               CLOB               IN
FUNCTION GETLENGTH RETURNS NUMBER(38)
Argument Name               Type               In/Out Default?
LOB_LOC               BLOB               IN
FUNCTION GETLENGTH RETURNS NUMBER(38)
Argument Name               Type               In/Out Default?
LOB_LOC               CLOB               IN
FUNCTION GETLENGTH RETURNS NUMBER(38)
Argument Name               Type               In/Out Default?
FILE_LOC               BINARY FILE LOB      IN
FUNCTION GET_STORAGE_LIMIT RETURNS NUMBER(38)
Argument Name               Type               In/Out Default?
LOB_LOC               CLOB               IN
FUNCTION GET_STORAGE_LIMIT RETURNS NUMBER(38)
Argument Name               Type               In/Out Default?
LOB_LOC               BLOB               IN
FUNCTION INSTR RETURNS NUMBER(38)
Argument Name               Type               In/Out Default?
LOB_LOC               BLOB               IN
PATTERN               RAW               IN
OFFSET                NUMBER(38)          IN     DEFAULT
NTH                    NUMBER(38)          IN     DEFAULT
FUNCTION INSTR RETURNS NUMBER(38)
Argument Name               Type               In/Out Default?
LOB_LOC               CLOB               IN
PATTERN               VARCHAR2          IN
OFFSET                NUMBER(38)          IN     DEFAULT
NTH                    NUMBER(38)          IN     DEFAULT
FUNCTION INSTR RETURNS NUMBER(38)
Argument Name               Type               In/Out Default?
FILE_LOC               BINARY FILE LOB      IN
PATTERN               RAW               IN
OFFSET                NUMBER(38)          IN     DEFAULT
NTH                    NUMBER(38)          IN     DEFAULT
FUNCTION ISOPEN RETURNS NUMBER(38)
Argument Name               Type               In/Out Default?
LOB_LOC               BLOB               IN
FUNCTION ISOPEN RETURNS NUMBER(38)
Argument Name               Type               In/Out Default?
LOB_LOC               CLOB               IN
FUNCTION ISOPEN RETURNS NUMBER(38)
Argument Name               Type               In/Out Default?
FILE_LOC               BINARY FILE LOB      IN
FUNCTION ISTEMPORARY RETURNS NUMBER(38)
Argument Name               Type               In/Out Default?
LOB_LOC               BLOB               IN
FUNCTION ISTEMPORARY RETURNS NUMBER(38)
Argument Name               Type               In/Out Default?
LOB_LOC               CLOB               IN
PROCEDURE LOADBLOBFROMFILE
Argument Name               Type               In/Out Default?
DEST_LOB               BLOB               IN/OUT
SRC_BFILE               BINARY FILE LOB      IN
AMOUNT                NUMBER(38)          IN
DEST_OFFSET               NUMBER(38)          IN/OUT
SRC_OFFSET               NUMBER(38)          IN/OUT
PROCEDURE LOADCLOBFROMFILE
Argument Name               Type               In/Out Default?
DEST_LOB               CLOB               IN/OUT
SRC_BFILE               BINARY FILE LOB      IN
AMOUNT                NUMBER(38)          IN
DEST_OFFSET               NUMBER(38)          IN/OUT
SRC_OFFSET               NUMBER(38)          IN/OUT
BFILE_CSID               NUMBER               IN
LANG_CONTEXT               NUMBER(38)          IN/OUT
WARNING               NUMBER(38)          OUT
PROCEDURE LOADFROMFILE
Argument Name               Type               In/Out Default?
DEST_LOB               BLOB               IN/OUT
SRC_LOB               BINARY FILE LOB      IN
AMOUNT                NUMBER(38)          IN
DEST_OFFSET               NUMBER(38)          IN     DEFAULT
SRC_OFFSET               NUMBER(38)          IN     DEFAULT
PROCEDURE LOADFROMFILE
Argument Name               Type               In/Out Default?
DEST_LOB               CLOB               IN/OUT
SRC_LOB               BINARY FILE LOB      IN
AMOUNT                NUMBER(38)          IN
DEST_OFFSET               NUMBER(38)          IN     DEFAULT
SRC_OFFSET               NUMBER(38)          IN     DEFAULT
PROCEDURE OPEN
Argument Name               Type               In/Out Default?
LOB_LOC               BLOB               IN/OUT
OPEN_MODE               BINARY_INTEGER          IN
PROCEDURE OPEN
Argument Name               Type               In/Out Default?
LOB_LOC               CLOB               IN/OUT
OPEN_MODE               BINARY_INTEGER          IN
PROCEDURE OPEN
Argument Name               Type               In/Out Default?
FILE_LOC               BINARY FILE LOB      IN/OUT
OPEN_MODE               BINARY_INTEGER          IN     DEFAULT
PROCEDURE READ
Argument Name               Type               In/Out Default?
LOB_LOC               BLOB               IN
AMOUNT                NUMBER(38)          IN/OUT
OFFSET                NUMBER(38)          IN
BUFFER                RAW               OUT
PROCEDURE READ
Argument Name               Type               In/Out Default?
LOB_LOC               CLOB               IN
AMOUNT                NUMBER(38)          IN/OUT
OFFSET                NUMBER(38)          IN
BUFFER                VARCHAR2          OUT
PROCEDURE READ
Argument Name               Type               In/Out Default?
FILE_LOC               BINARY FILE LOB      IN
AMOUNT                NUMBER(38)          IN/OUT
OFFSET                NUMBER(38)          IN
BUFFER                RAW               OUT
FUNCTION SUBSTR RETURNS RAW
Argument Name               Type               In/Out Default?
LOB_LOC               BLOB               IN
AMOUNT                NUMBER(38)          IN     DEFAULT
OFFSET                NUMBER(38)          IN     DEFAULT
FUNCTION SUBSTR RETURNS VARCHAR2
Argument Name               Type               In/Out Default?
LOB_LOC               CLOB               IN
AMOUNT                NUMBER(38)          IN     DEFAULT
OFFSET                NUMBER(38)          IN     DEFAULT
FUNCTION SUBSTR RETURNS RAW
Argument Name               Type               In/Out Default?
FILE_LOC               BINARY FILE LOB      IN
AMOUNT                NUMBER(38)          IN     DEFAULT
OFFSET                NUMBER(38)          IN     DEFAULT
PROCEDURE TRIM
Argument Name               Type               In/Out Default?
LOB_LOC               BLOB               IN/OUT
NEWLEN                NUMBER(38)          IN
PROCEDURE TRIM
Argument Name               Type               In/Out Default?
LOB_LOC               CLOB               IN/OUT
NEWLEN                NUMBER(38)          IN
PROCEDURE WRITE
Argument Name               Type               In/Out Default?
LOB_LOC               BLOB               IN/OUT
AMOUNT                NUMBER(38)          IN
OFFSET                NUMBER(38)          IN
BUFFER                RAW               IN
PROCEDURE WRITE
Argument Name               Type               In/Out Default?
LOB_LOC               CLOB               IN/OUT
AMOUNT                NUMBER(38)          IN
OFFSET                NUMBER(38)          IN
BUFFER                VARCHAR2          IN
PROCEDURE WRITEAPPEND
Argument Name               Type               In/Out Default?
LOB_LOC               BLOB               IN/OUT
AMOUNT                NUMBER(38)          IN
BUFFER                RAW               IN
PROCEDURE WRITEAPPEND
Argument Name               Type               In/Out Default?
LOB_LOC               CLOB               IN/OUT
AMOUNT                NUMBER(38)          IN
BUFFER                VARCHAR2          IN
SQL>

Possible corrupt or injected data

Hello,
I have a question for the SQL Server security experts.
My scenario is as follows: I am currently migrating data off a legacy system, and into another. This system is notoriously hard to work with, and has been severely abused over the years. Many logical associations were broken, and band aided
back together. It is a sunset system, however demographic data still needs to be retrieved.
Upon loading the data into a slowly changing dimension in another system, I am running into an issue where the same values will not equal themselves. I have tried converting the data types, stripping all non-ascii characters from the string data.
I have checked the data lengths, all equal similarly length and stored string data. I am detecting no hidden characters within the string as well. There is no reason why this data won't equal itself. My only conclusion at this point is that
it is either corrupted or injected.
Are there any suggestions on how to detect possible corruption or injection? I have read many articles around sql injection, and I suspect that I am dealing with binary data injected onto the end of the string data. However, when I check the
byte size it looks normal.

Physical corruption you would detect with DBCC CHECKDB
Corrupted foreign keys you could detect with DBCC CHECKCONSTRAINTS
If someone has maliciously manipulated the data in order to conduct any kind of second order attack via SQL Injection or otherwise, it really depends on the skillfulness of the attack how easily one could detect & comprehend that.
Hidden character may also have gotten into the system by badly written applications and imho are not necessarily an indication of an attack.
Maybe you could show us a sample.
If you truly suspect an attack going on though, you should follow your hopefully existing escalation procedures and get the system ready for a forensic investigation by making sure nothing can get changed any more. Unless you want to keep
that system running to try to catch the attacker “live”. But I do not recommend using a production system as a honeypot if you don’t know exactly what you are doing (and probably not even then).
Andreas Wolter (Blog |
Twitter)
MCSM: Microsoft Certified Solutions Master Data Platform, MCM, MVP
www.SarpedonQualityLab.com |
www.SQL-Server-Master-Class.com

MacBook pro will not boot up. Blank screen with message File is possibly corrupted. Checksum does not match etc

MacBook Pro suddenly will not boot up. Blank screen with message File is possibly corrupt. Header checksum does not match, etc

Hi s.cheslik,
It seems your MacBook Pro will not boot properly and it displaying an error message. Based on the information you have provided, it appears your MacBook Pro needs to be serviced. The following link should help you get started with the process and has links with additional information on topics such as warranty and service pricing, battery replacement, and express replacement service.
Apple - Support - Service Answer Center
Thank you for contributing to Apple Support Communities.
Take care,
Bobby_D

Is it possible to chenage logical system and how after a system is beeing u

Hello
I wander is it possible to chenage logical system and how after a system is beeing used for a while and how?

Hello Tina,
If the system is NOT a production system transaction BDLS can be used to change the logical system. This would be necessary after refreshing a dev system from a production system, for example.
If the system is a production system, I would agree that this is NOT advisable.
Regards
Greg Kern

WARNING: Flash Archive IDs do not match (possible corrupt archive)

I'm running into problems when trying to use a newly patched Solaris 10 system's flash image via my Solaris 9 Jumpstart server. I'm able to use other flash's (Solaris 9 and 10) fine, but when I use this flash I get:
Extracted 823.00 MB ( 99% of 824.99 MB archive)
Extracted 824.00 MB ( 99% of 824.99 MB archive)
Extracted 824.99 MB (100% of 824.99 MB archive)
WARNING: Flash Archive IDs do not match (possible corrupt archive)
Extraction complete
Postdeployment processing
No local customization defined
cp: cannot create /a/etc/init.d/flash_reboot_processing: No such file or directory
Can not set reboot customization scripts
ERROR: Error while processing system postdeployment script
ERROR: Postdeployment processing failure
ERROR: Flash installation failed
Solaris installation program exited.
I've use the same script I've always used twice to create the flash to no avail.
Any ideas?

Hi,
I have the same problem, How did yoy fix this. /usr at this stage is a ram disk i assume. Can you increase this.
Cheers
Paul

Is it possible to use logic rules to manage email submission receipts?

Is it possible to use logic rules to manage email submission receipts?
I have one form and based on the user's selection I want to manage which email submission receipt gets sent to that specific user.
Is this at all possible?
Please ask for clarification if I am not making sense.

It should be no problem since the Audio Kontrol 1 is Core Audio compatible. This has nothing to do with VST's.
In doubt contact Native Instruments support.
Fox

No booting up, file is possibly corrupt

Please I need help. I turned my laptop off and went to turn it back on it would nt boot up.
I am a technophob.
The message that comes up reads "The file is possibly corrupt. The file header checksum does not match the computed checksum.
Please help I need it thankyou in advance
James

Hi rockjedi,
In my opinion you should give us a little bit more details about your notebook and operating system.
What do you think?
Im not sure but I think now its time for reinstalling Windows. You can choose the HDD recovery feature if your notebook does it have or Toshiba recovery disk.

Wondering if possible to open Logic sessions in Soundtrack Pro?

Hi there - operating Logic Studio - wondering if it is possible to open Logic sessions in Soundtrack Pro like it is possible t open garageband sessions in Logic?

No not possible but you can send an audio file/region from Logic to STP for editing and back again.
STP does not support MIDI. Logic projects could contain MIDI regions and software instrument channel strips. This would not work!
Export your track from the logic project to audio files and import them into STP as a multi-track project.
JG

Logic preferences

Everything in my studio is working great,
But I can't seem to find my logic preferences anywhere. ?
I saw in another thread that people were saying to go to users/library/preferences and look for a com.apple.plist file and there is no such file on my computer?
I'd like to know where this is located in case I may need to dump the preferences one day when logos starts acting funny lol,
Thank you all ,
Derek

This should help.
http://support.apple.com/kb/HT2375

Need help understanding Specific Logic preferences

Hello everyone. I'm currently optimizing my system for my next project, and decided to dive into the manual and read up on Logic's song setttings/preferences, however there were a few I did not understand. Can someone explain the following Logic preferences and what they effect/do? (I have included the associated Logic manual pages, hoping they will make sense to you, as they didnt to me
Living Groove connection: pg. 641 No clue what this does
Smooth Cycle Algorithm: pg 641 Do not understand
Plugin Delay compensation: pg 644. Do I need this if I am not using a DSP card, but am using the "external" and "I/O" plugins?
Sample Accurate automation: pg 644 How important is this? How much "overall system performance" is effected with this enabled? When not enabled, what is the default unit? A frame? QF? Tick?
Audio preferences-Drivers-Process buffer Range: pg 380 Dont understand the testing process. What should I expect to change between the different settings?
Audio preferences-Sample editor-"Global Undo File path" or "Store undo files in song folder." Which to use an why?
Video-Video to Song: pg 653 Is this some sort of timing compensation? Why would this be used in place of Video offset within the session itself?
Thanks in advance for any reply!
Dual 2.5GHz G5 Mac OS X (10.4.5) 5Gb Ram, Logic 7.1.1 and other goodies

Living Groove connection - If you create a groove using a region, but then you change notes' positions/velocity in the template region, any quantizing you do based on that groove will change as well. don't know if it works reliably now. Last time I tried it many years ago it was flaky.
Smooth Cycle Algorithm: Tries to optimize the way cycling works to smooth transitions between end point and start point to eliminate glitching and/or stuttering in the time.
Plugin Delay compensation: Mostly for use with 3rd party DSP cards. I don't think it has any effect on external and I/O plugs. Could be wrong about that.
Sample Accurate automation: Performance hit depends on your CPU. Not sure what the non-sample accurate default is. Probably means that the resolution is the same as that of Midi data.
Audio preferences-Drivers-Process buffer Range. You have to test by trial-and-error. Use the smallest setting which doesn't make your computer convulse whent you work it hard. Changing this setting can alter the slew rate and latency of some kind of automation and thus change the way your mixes sound if you have a lot of rapid automation moves, so try not to mess with it once you find a good setting.
"Global Undo File path" or "Store undo files in song folder." Use the latter, particularly if you use project folders and have any intentions of transporting your work or need to keep access to your undo history. Putting undo data in project folder means it gets saved with your song.
Video-Video to Song: Is how you adjust the startpoint of the movie relative to the startpoint of the Song in Logic. Your downbeat may not correspond exactly to how the video was cut. This is how you compensate for that.
External Video to Song is an aditional adjustment to conpensate for latency caused by playing QT movies via a DV bridge device on FW.

TS4498 Is it possible to support Logic in 32-bit plug-ins in future updates? How about to make a bridge built in Logic. I would have long ago moved on to a new version of Logic, but I have the equipment (UAD-1 and Liquid Mix), which are not run on the Loq

Is it possible to support Logic in 32-bit plug-ins in future updates? How about to make a bridge built in Logic. I would have long ago moved on to a new version of Logic, but I have the equipment (UAD-1 and Liquid Mix), which are not run on the Loqic X. So I would suggest to make a bridge in Logic X. As it was in version 9 of the Logic.

In addition.. Focusrite have stated they will not be releasing a 64bit version of Liquid Mix as they consider it outdated software these days.... even though at one point a limited release beta version had a 64bit AU version included but it was so unstable it was rapidly dropped...
However the 32bit to 64bit bridge plugin 32 Lives, states it will handle and 'convert' the Stereo version of Liquid Mix to 64bit but not the Mono version... within LPX
http://www.soundradix.com/products/32-lives/compatibility
Finally, like others here, I would be extremely surprised if Apple added 32bit AU support back into LPX.. That '32bit tech' is long dead and gone....in terms of modern DAWs... as it is in other DAWs such as the recent PT versions...

Hi, is it still possible to buy logic pro/express 6 as i have been given an imac g4 1ghz ppc and would love to see it in action, ps. never owned a mac before cheers

hi, is it still possible to buy logic pro/express 6 as i have been given an imac g4 1ghz ppc and would love to see it in action, ps. never owned a mac before cheers

eBay, if you are lucky. On the other hand: a used copy is probably more expensive than a new used Mac from eBay...

Ipod screen frozen - itunes detects possible corruption

ipod was on pause mode and locked and now screen has frozen and won't unlock (even when I slide the unlock button). I have plugged the ipod into my itunes and the device is not registered and I got an error message appear saying that itunes detected a possible corrupted ipod.
Help please?
Windows XP Pro

Followed the 5 R's and found that resetting the ipod worked a treat!

Possible Corruption in Logic Preferences?

Similar Messages

Maybe you are looking for