Possible disk problem.

On a day when I REALLY needed everything working, looks like it's died on me.
The comp booted up ok earlier on (does often take several attempts to boot up successfully, probably down to cold temperatures), but it then had a couple of errors when loading software, and I restarted hoping it would clear it up.
It's not booted since then, just gets to the 'you need to restart you computer' screen. Managed to boot it from the CD drive to have a look at what was going on, and on looking at the main volume I get the:
'"The underlying task reported failure"'
From all accounts, this is not a good thing. I've got the disk partitioned, and the second volume (where all important data is) seems OK. Really hoping I can get this sorted without loosing an info off the second volume, though I could afford to re-install everyone on the first drive.
Just wondered best way to go about things. I haven't phoned support, but I'm assuming they'll talk me through a clean install and format, and I really can't afford to loose the data. From what I can tell, the data in the 2nd volume is all OK, so how can I best go about backing it up safely?
Sorry if this all a bit vague, but just hoping there's some answers out there, I'm a little shell-shocked right now, and a little annoyed at myself for not having things backed-up fully.....
Thanks
AB

You have already tried the repair and it said that? Try running the repair several more times. If it still reports that read this Apple article on it- Apple doc.#302411.
If Disk Utility can't fix it booted up on your disk, DiskWarrior would be your best choice for directory repairs; what you have. Get the CD so you can boot from it.
Cheers!
DALE
p.s. an erase and install will fix this but you'll lose all your data.

Similar Messages

Fastest possible disk access in os9

hi there
as the topic says im interested in achieving the best possible disk speeds in os9 for use with old media programs.
i have resurrected an old g4 450mhz sawtooth that im using to run some old music production programs
im pretty sure that the disk speed is the biggest bottleneck on this machine.
Ive been looking into the following ACARD devices ive provided links to newegg
simple for the images + reference
ACARD AEC-6280M (4 CH IDE | NON RAID)
http://www.newegg.ca/Product/Product.aspx?Item=N82E16816123110R
ACARD AEC-6290M (2 CH SATA150 | NONRAID)
http://www.newegg.ca/Product/Product.aspx?Item=N82E16816123109R
ACARD AEC-6880M(4CH IDE RAID0/1)
http://www.newegg.ca/Product/Product.aspx?Item=N82E16816123007R
ACARD AEC-6885M (4CH IDE RAID0/1/0+1)
http://www.newegg.ca/Product/Product.aspx?Item=N82E16816123008R
ACARD AEC-6890M (2CH SATA150 RAID0/1)
http://www.newegg.ca/Product/Product.aspx?Item=N82E16816123111R
features booting into os9
my question is can anyone reccomend to me any other cards that i might find cheaply + available
that provide the following criteria:
a) bootable into os9
b) supporting SATA hard drive (so i can buy new hard drives in the future IDE are no longer available for purchase at my local shop)
c) hardware raid
d) supporting HFS volume visible to both os9 + osx
e) hardware raid dip-switchable from RAID0/RAID1 (RAID0+1 would be the ultimate)
f) PCI interface and compatible with all G3/G4 and also pci/pci-x based G5's
the 6890M seems like the perfect option for me but i have found that these items are now unavailable + sold out.
is there any other product that i can try to find under a diferent brand name ? i have read that acard did cards for sonnet/miglia/SIIG
that were rebranded... Im hoping someones already done their homework on all this stuff and can point me in the rigth direction
so i can get to using my programs + os to do what i love to do and stop worrying about technical headaches..
again obv this isnt my only computer but i like to use os9 for some programs + also its unique GUI environment!
fingers crossed

@brody
i actually own one i have it on the desk sitting next to me right now. its a silicon images controller with custom firmware to provide the mac compatibility... works great... but only provides 2x sata150 ports.. which is great in and of itself.. but doesnt provide raid to os9.. doesnt alllow you to combine the speed of two drives together undre os9... to achieve a speed comparible of sata II (sata2 or sata300)
@jon
yes i imagined that card would be the best bang for buck but again that card provides the ports for ide drives and doesnt provide the combination of more then one drive unless u were to use it under osx.. and then u could acheive this with softare raid from disk utility but wouldnt allow me to use two drives as one volume under os9
ive actually been in touch with acard and they said they are out of stock completely on the AEC-6890M which is the card that provides RAID with 2x Sata drives for os9. im looking for a similar product to this.. that has the raid controlled by the card and not the OS.. configurable between RAID0, RAID1 and possibly even RAID0+1(which would require 4 drives tho, instead of just 2)
ive just got a response back from a calssified ad i posted to but had almost given up on after not receiving a response. the guy was on vacation;) anyways hes got a AEC-6880M which is the raid capable IDE Card.. for a good price.. the only problem is.. the availability of IDE hard drives.. they are all dying and i dont think they are making IDE ATA133 drives anymore.. ? does anyone know?

How do I resolve LOCKED DISKS problem ? NO ACCESS ANYMORE !

Hello everybody,
I've looked carefully where to post this topic,
and I hope it's the right place here
(I have already been warned not to post the same questions in different places).
I have actually 2 internal volumes locked, 2 external Firewire volumes locked and 2 USB external volumes locked. I'm talking about *5,7 To* with *NO ACCESS* anymore.
It happened suddenly, and I was working on Snow Leopard 10.6.3 internal drive. This volume is the *only one* that has NOT been locked, but I lost a lot of applications, documents and so on on it.
Each of the locked volumes I am talking about shows,
in *Sharing & Permissions* (Get Info window),
the same Privileges :
— everyone : Custom
— admin : Custom
— olcha (Me) : Custom
— staff : Custom
— everyone (again) : Custom
You'll notice that "System" is not there (should be there with R+W),
and "admin" should have also R+W privilege.
I don't know why "staff" is here (perhaps, one day, somebody will explain to me the difference between : wheel, staff and admin).
I also don't know why "everyone" is there two times.
If I unlock the padlock (bottom right) with my password, I can only
check or uncheck the "Ignore ownership on this volume" square (bottom left).
Doing this (apparently) offers *no interest at all* to solve the problem
(and what does this function produce, when activated or not ?).
I can't *absolutely not* :
• Change *any privilege* of any of the 5 items ;
• Remove (with "-") any of these items ;
• Add a line (for example "System" or "wheel", why not ?)
but nothing new is shown after "+" making.
• The wheel (on the right of "+" and "-") shows only "revert changes" in grey.
I phoned immediately last thursday Apple Assistance,
and I am in contact with a Level 2 Apple Adviser who gave me his e-mail.
I sent him two messages, but he replied me that perhaps MONDAY
he could find the time to call me.
Now, first, please tell me if you have any idea or solution !
Thank you very much in advance.
Secondly, I have reflected on the solving,
and would like to know what you think about what follows :
You know that, in Disk Utility, you can erase a disk or partition.
If, in "Security Options…", I choose "Don't Erase Data", and then "Erase…" :
1) Sharing and Permissions will be changed and become (reset to) correct ;
2) It's said, in "Security Options…",
that "many commonly available disk recovery applications can restore that data".
I would be very glad that you indicate me :
1) the best application to use for that recovery ;
2) I already own "Drive Genius 3.0", "Data Rescue 3.0.2" and
(I think it's the best after a try on an internal 30 Go partition)
"Stellar Phoenix Macintosh Data Recovery".
Thank you in advance for your answers and advices,
With my kind regards
Olivier Herrbach
[email protected]
PS : Dear Forum Webmaster,
I would like to know :
1) if I posted this topic in the right place ;
2) if you allow me to post it elsewhere (and in this case, where ?) ;
3) is it possible to paste images in messages,
and, if yes, which format is needed (TIFF, png, jpeg …)
Thank you very much
Olivier Herrbach

Dear ChazBowie,
Here is the solution I've found for *LOCKED DISKS* problem.
I'll respond the shorter I can, avoiding for the moment to talk about the complicated solutions
that Apple gave to me, which involved volume by volume (only one each time) intervention, and were working by, each time, entering one line, password, then another line in Terminal. I will communicate these instructions later, but they do not need to be publicated here with urgence.
I found two little free softwares that can modify *ALL Privileges* in Sharing and Permissions, *on ANYTHING*. You will have to be careful using them, as they even allow to act as "Root" administrator.
I'd also like everyone to *donate anything* to these helpful developers, and I'd be very pleased to have *your feedback and results*.
••• 1) — *BatChmod 1.6.2* (162), written by a compatriot, Renaud Boisjoly.
E-mail (if you have doubts or questions) : [email protected]
Free software downloading site : *http://www.macchampion.com/arbysoft*
(excuse me, but I don't know how to make a link here).
••• 2) — *FileXaminer 2.7*, recommended by Renaud himself.
Dear ChazBowie,
Here is the solution I've found for *LOCKED DISKS* problem.
I'll respond the shorter I can, avoiding for the moment to talk about the complicated solutions
that Apple gave to me, which involved volume by volume (only one each time) intervention, and were working by, each time, entering one line, password, then another line in Terminal. I will communicate these instructions later, but they do not need to be publicated here with urgence.
I found two little free softwares that can modify *ALL Privileges* in Sharing and Permissions, *on ANYTHING*. You will have to be careful using them, as they even allow to act as "Root" administrator.
I'd also like everyone to *donate anything* to these helpful developers, and I'd be very pleased to have *your feedback and results*.
••• 1) — *BatChmod 1.6.2* (162), written by a compatriot, Renaud Boisjoly.
E-mail (if you have doubts or questions) : [email protected]
Free software downloading site : Gideon Softworks : *http://www.gideonsoftworks.com/*
I won't copy here the texts that are on both sites, but it's very instructive.
Remember that the applications don't only work on files and folders,
*but also on disks attributes*.
You'll also have some work to do (I don't remember, perhaps not), by going in the Get Info windows
and changing privileges to the correct ones, that means you must know
(I'm not sure, verify please) what privileges are to be set for a volume
(YOU WILL HAVE ACCESS TO THEM, AND CHANGES YOU MAKE WON'T BE RESET TO "CUSTOM").
Does anybody know something about the "Ignore ownership on this volume" checkbox ?
*I always uncheck it*.
I would also like very much to know the differences between the two-headed iconed groups :
"staff", "wheel" and "admin", and IN THE END know *WHERE are the rules* you have to observe
when doing changes in privileges (for example, I don't want to give my password to copy something in Users folder, nor "MyName" folder. I've changed that without, I hope, having created any dysfunction).
Please tell me if you know anything about these 2 subjects above.
I'm very glad if my informations have been useful/helpful.
With my kind regards,
Olivier Herrbach

IPod classic issues with iTunes 9 just may be disk problems in ipod

I have done extensive testing for several days now on this iTunes 9 issue with iPod Classics. I used 3 different computers, 1 Macbook Pro, Windows 7 and XP with iTunes 8. I had 2 - ipod classic 80GB and 2 - ipod 5th Generation 30GB units people gave me to look at.
It would take too much typing to describe all the restores, syncs, formats, copies I did over the past few days.
Bottom line: Using PC utilities I began to believe the iPod hard drives had bad sectors. I trusted the disk testing because I got different results from different ipods. The problems I experienced and what I have read here are consistent with what you would expect from disk problems and S.M.A.R.T. technology on the drives.
If bad sectors on a drive are dealt with by S.M.A.R.T. I would expect delays in accessing those sectors to occur.. resulting in delays to restore, delays to sync, delays to even skip songs on the ipod itself.
What may be the case is switching to iTunes 9, discovers when it trys to use the bad sectors. Maybe iTunes 9 is more timing temperamental. I have iPods that pass all disk tests that work fine with iTunes 9 on mac and PC. The other 2 ipods reporting bad sectors on a disk test, can restore, but syncing 3000+ songs is nearly impossible. Sync delays were consistent with where I would expect bad sectors to exist in the process. Delays I noticed just copying a folder to the ipod in disk mode were consistent with the delays that occur syncing in iTunes.

It is a possibility...
I will state though that in my opinion the main problem is that itunes 9 is far less fault tolerant than prior versions and is far more likely to preemptively send an ipod into recovery mode when running into a problem when a ipod is plugged in.
I'd had a couple of incidents in prior versions of itunes when it flashed an alert message that it was having trouble accessing the ipod. Usually unplugging and reconnecting the ipod resolved the issue. Unfortunately this system of handling the issue does not work at all with itunes 9. What happens is that the next time you plug in the ipod it is preemptively sent into recovery mode.
I've had my ipod sent into recovery mode 7-8 times since I Installed Itunes 9. The last 5 of those in the last week. I've already done the reinstall itunes 9 from scratch and I still had to do a recovery of the ipod last night. Today I bought a new interface cable on the theory that my old cable might be defective. I've been able to plug it in tonight without itunes complaining about being unable to access the ipod

Windows has detected a hard disk problem

I just got a warning from windows that I have a hard disk problem then Toshiba Utility notifies me with the following:
Disk0
Your HDD has the SMART Predict Failure function which monitors the HDD operating status. Your HDD is experiencing a problem and SMART monitoring software predicts that the HDD will fail. Toshiba strongly recommends you create a back-up for your HDD data. Then contact an authorized service provider in order to check your drive and purchase a new replacement drive if necessary.
I have never had problems with a hard disk, all I know is that I should get a backup drive as soon as possible. After I back up my files and everything....what is the next step? Take it to a repair man to fix, get a new harddrive, contact about warranty, what exactly do you do with this kind of situation? Is it fixable?
System Details:
Toshiba Satellite L675D-S7052
Windows 7 Home Premium 64 Bit

If you're computer is under warranty, you should contact customer support at (800) 457-7777. The hard drive will need to be replaced.
- Peter

Recurring iMac G5 Hard Disk problem and worthless AppleCare

Hello all! I have a recurring iMac G5 2Ghz (20-inch) Hard Disk problem.
I bought my parents, aged 52 and 55, an iMac last summer. Hoping this would be their solution to a hassle free and easy computer environment, since I would leave for China for about 1 year. But last month the hard drisk crashed and could not be fixed.
At first the start up speed slowed down, then the start up process would continue infinitely, then the computer just booted into a screen with a question mark.
I have a AppleCare Protection Plan (APP) and so I called the Help Desk and they put me in touch with a Service Center (Sittard, the Netherlands). Now I thought, since I live within the proper range of at least 3 service centers (Heerlen, the Netherlands), I could get on-site support (as stated in APP), unfortunately for unknown reasons, my parents had to drag the 20 inch monster to the service center.
Normally the repair should take 2 days, but instead it took 10 working days. My dad naturally asked, if they could restore the data on the disk. This was only possible if we paid about 2000 euro. So, no deal!
After picking the iMac up again, the computer booted into the Mac OS installation. This again surprised me, since according to the APP they should at least put some effort into restoring the applications. Not even iLife was pre-installed, which was of course on the computer when we bought it. Next to that the Service Center's Mac OS installation disc was still in the drive; how careless!
They were quite sad about the lost data, but accepted it, as we all know that these things can happen to electronics. BUT today, the same problem recurred! First the start up process slowed down and now (again) it tries to start up infinitely.
The hard disk is brand new (1 month), no strange programs and no abnormal use. According to the diagnostic tools the file structure is damaged, but it seems to keep getting worse. The Apple Help Desk guy was even surprised this happened to a brand new disk and installation. He recommended reinstalling the system.
But, I'm not happy with this solution! A hard disk breaking down, is one thing. But the same problem recurring 1 month later made a couple of alarm bells go off. I'm hoping Apple will consider replacing this machine from **** with a brand new iMac. Since my parents are scared ********, that whatever document they type today might disappear again tomorrow. This is not a comfortable computing experience.
By the way: the computer has only basic software: Microsoft Office, Skype and iLife and my parents only use those programs, surf the net and send email.
Any of you had a similar bad experience with the iMac's hard disk, AppleCare or any of Apple's Service Centers? Or does anyone know how to reach Apple by email?
iMac 20 G5 2Ghz Mac OS X (10.4.6)

I had a similar problem with my 20" 2Ghz iMac.
After replacing the HD and the next 'going bad' the tech realized there was a different problem.
After discussing it, and the distance to an authorized repairer he offered on-site repair.
After a lengthy parts delay I was offered an upgrade to a iSight iMac.
The tech narrowed my problem down to a faulty logic board before offering a replacement. He could have been wrong but it seemed logical with all of the same symptoms.
Press your AppleCare to replace this computer. They are going to try and repair but insist if this fix doesn't work you want a new iMac.
I hope everything works out for you.
Edit: There is a great program that Apple techs recommend called DiskWarrior. It did not fix my problem but it allowed me to get my most important info off of the computer before it went to computer heaven. Might not work for all but it works well for me as I still use it today.

Disk problem in MacBook Pro (hardware or corrupted files?)

I am running Mac OS X 10.6.8 on a 15" MBP 2.33 GHz Intel Core 2 Duo with 3 GB RAM (added 1 to the original setup.)
A few months ago I replaced the original 120 GB hard drive, as it was getting full and making my computer slower. The new one is a 350 GB 5400 rpm Western Digital drive. I did this myself, following the instructions in ifixit.com, as I have done it in the past with other machines, including my wife's MBP, that is working fine.
In the first OS install I used migration assistant and recreated the original user exactly as in the old disk. After a couple of months of use the computer started to get slower and presented permission problems that didn't seem serious (used Disk Utility to check). After a while, there was also a report of problems on disk verification, that at one point couldn't be repaired with Disk Utility. I was able to get rid of the problem for a while using Disk Warrior, but at some point the disk problems appeared again and I had to do a new OS install from zero.
This time I formatted the hard drive writing zeros to correct possible physical errors and did a clean install. Used migration assistant to copy only my user's documents and library. After a couple of weeks of running the laptop without problems, I am having again reports of disk errors that Disk Utility can't repair. Disk Warrior can't access the drive and Tech Tool Pro reports 72 bad sectors.
My question is:
Is this definitely a hardware problem that will be solved by replacing the hard drive again, or is it possible that this is being the result of some corrupt files on my user's library (as the problem only appears after a while)?

ign wrote:
Is it normal that the drve appears to be OK after an OS install and that the physical problem only appears after a while?
If you zero it, yes. That's exactly what zeroing does, "mapping" the HD so bad sectors/blocks are not used. But if a HD is dying, more bad areas will show up. It's time to replace the HD.

Major External USB Disk problem

I noticed today that an external drive I have had connected to my MacBook Pro for several months seemed to have no data on it. While showing no files or folders in the Finder view, it showed that only 222GB or so was still free though the drive is a 500GB unit. In Disk Utility it does show the additiona 243GB or so as "Used".
I have tried running Verify Disk and got a message saying
"First Aid Failed / Disk Utility stopped verifying "VMG 001" because the following error was encountered / File System verify or repair failed"
I then tried Repair Disk and got this message:
"Verify and Repair volume "VMG 001" / The disk "VMG 001" could not be unmounted"
I then tried Erasing the drive (to restore from my Time Machine backup on a Time Capsule) but I can't do that either. Finally, when I try to eject the drive to unplug it I get a message saying it could not be ejected and I should "Try quitting applications and try again"
Neddless to say that I've tried that and it still won't eject.
Do I have a virus, a major disk problem or a combination of the two. ANd is there a way to recover the drive or am I going to have to get another drive. If I do, and I give it the sam volume name will I be able to recover my data with Time Machine?
Thanks for any help you can offer.
- Vikas

One possibility is that if you regularly drag lareg numbers of files to it, Spotlight is constantly trying to catch up with what you deleted and what you brought over.
I drag 10GB to a LaCie once or twice a month and it does take a few hours to stop rattling.

Firmware disk problem

Hi,
After the last Airport firmware update (7.6) on my Airport Extreme doesn't show the USB attached disk anymore. And the Finder menu doesn't show it it the Shared section anymore.
Any other persons experiencing this?
Regards,
Wim.

OK, I had some time this weekend to dive in. I found it and repaired it.
For whoever wants to know it or might need it, this is what I did:
- After checking the router and all settings without finding anything abnormal, I took the external disk from the Extreme, connected to my MacBook Pro and saw nothing. Uhh, nothing?
- No, not in the Finder, not in the Disk Utility, not on the commandline trying low-level Unix mount commands, but the device was there by probing /dev.
- I powered on my old PowerBook still runing 10.4 (Tiger) in my private mini-lab. so I could do some digging without jeopardising my production MacBook Pro. And this guy showed me a mounted device, although not in the Finder. This was by-the-way the original machine (and OS) which had made the filesystem in the first place. Disk Utility here showed me a corrupted header. I let it repair. What could I loose? (67 GB of iTunes files from my own collection of CD's :-)
- After the corrupted header was repaired, Finder did show, also did my MacBook Pro (running 10.5, Leopard), but acessing the files was not yet possible, Disk Utility thinks all is fine. I turned out the protection of the root on the disk was also damaged, a simple sudo chmod ugo+x /Volumes/<mydisk>/ gave me access again. Voila, everything was still there. (And yes later I put the protection back to the proper -rwxrwxr-x)
Learned: Somewhere in the Airpoert update-process the raw disk header (first 512 bytes) seems to be damaged, Disk Utility repaired (10.4) but didn't show a protection problem (both 10.4 and 10.5) and did not even suggest one. All execute bits were gone.
If you want to avoid it, you might want to unmount and disconnect your external disk first before doing the Airport firmware update.
Regards,
Wim.

Help needed Hard disk Problem

I am not very computer Savoy!. But every time I turn my laptop on it keeps freezing up on me and I get a massage that says I am having a Hard Disk Problem and that I should back up all my files before the computer crashes. And I would like to what I should do to fix this? I thought that I could reload my operating system but my computer did not come with that disk and I can't seem to find it here on this web site. Any idea's?

Without knowing specifically which model you have it's difficult to tell for sure, but most Toshiba's made in the past few years come with a Recovery Partition. You can invoke the Recovery Process by holding down the 0 (zero) key while turning the computer on and holding it down until the Recovery Process starts. You can also create a set of Recover Disks from the Recovery partiton by going to "Start - All Programs - Toshiba - Recovery - Recovery Disk Creator".
As for the error message about Hard Disk Problem, that could mean that the hard drive is starting to malfuncion and will soon stop functioning at all. You need to determince what brand of hard drive your's is, go to that companies support site, download their Diagnostic Program, install it, and run the most exhaustive test to determine if it is failing or not.
And please backup you important data as soon as humanly possible as there is a good chance you will lose it forever.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

System freezes due to hard disk problems only on Linux (not windows)

Intro/context:
Recently i've bought (about 2 months) a new laptop, a Lenovo G50-70, which came with Windows 8.1. As i had no interest on that OS, i formatted the disk and installed only Arch Linux. During that time i experienced system freezes which i had no idea why they were happening. As time went by, i found disk errors on system logs related to hard drive. I searched those errors and almost everything i found was that my hard drive had problems, so i decided to use my warranty. But first, i installed the original OS back again. And after using it a couple of weeks, i didn't experiencie any problem with my hard drive (on Linux it was really frequent). Now i've installed Arch Linux back, along with original Windows 8.1, having dual boot. There is no disk problem when using Windows, but when on Arch, i have the same errors and problems i used to have. So i assume it may be related to kernel or some confniguration issue.
I also haven't noticed any relation between system freezes and system use. I mean, it can happen either under light or heavy use.
tl dr: system freezes randomly for some minutes when using linux due to hard drive problems. The problem doesn't happen on windows.
What i've done so far:
The first period i was on Arch, i run smart (long and short), fsck, and hdparm tests. And nothing (no errors). Searched for bad blocks, and nothing. When back on windows, i also run tests on hdd and found no problems, except some sector reallocation not-that-nice indicators. These problems occured at the end of the first arch installation period. But still i currently experience no problem on windows.
I've also tried setting libata: noncq, 3.0G, noacpi, noapic kernel parameters, and had no result.
Changed BIOS setting from AHCI to Legacy, and no result. Also updated BIOS and no result.
I found no firmware update for this hard drive.
So i don't know what other thing i can try. I want to emphasize that there is no problem, no freezing, when running Windows, so i don't think it's a hard drive issue.
Info:
Hard drive is a Toshiba 2.5" HDD MQ01ABD100 5400 rpm.
Some logs i've recollected all this time:
journalctl -xfa --system
abr 21 13:51:13 echoes kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
abr 21 13:51:24 echoes kernel: ata1.00: failed command: CHECK POWER MODE
abr 21 13:51:24 echoes kernel: ata1.00: cmd e5/00:00:00:00:00/00:00:00:00:00/00 tag 7
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 21 13:51:24 echoes kernel: ata1.00: status: { DRDY }
abr 21 13:51:24 echoes kernel: ata1: hard resetting link
abr 21 13:51:24 echoes kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
abr 21 13:51:24 echoes kernel: ata1.00: configured for UDMA/100
abr 21 13:51:24 echoes kernel: ata1: EH complete
abr 21 14:01:40 echoes kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
abr 21 14:02:01 echoes kernel: ata1.00: failed command: SMART
abr 21 14:02:01 echoes kernel: ata1.00: cmd b0/d1:01:00:4f:c2/00:00:00:00:00/00 tag 23 pio 512 in
res 40/00:ff:80:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 21 14:02:01 echoes kernel: ata1.00: status: { DRDY }
abr 21 14:02:01 echoes kernel: ata1: hard resetting link
abr 21 14:02:01 echoes kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
abr 21 14:02:01 echoes kernel: ata1.00: configured for UDMA/100
abr 21 14:02:01 echoes kernel: ata1: EH complete
abr 21 14:02:01 echoes kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
abr 21 14:02:01 echoes kernel: ata1.00: failed command: SMART
abr 21 14:02:01 echoes kernel: ata1.00: cmd b0/d0:01:00:4f:c2/00:00:00:00:00/00 tag 22 pio 512 in
res 40/00:ff:ff:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 21 14:02:01 echoes kernel: ata1.00: status: { DRDY }
abr 21 14:02:01 echoes kernel: ata1: hard resetting link
abr 21 14:02:01 echoes kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
abr 21 14:02:01 echoes kernel: ata1.00: configured for UDMA/100
abr 21 14:02:01 echoes kernel: ata1: EH complete
abr 21 14:02:01 echoes kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
abr 21 14:02:01 echoes kernel: ata1.00: failed command: SMART
abr 21 14:02:01 echoes kernel: ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 18
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 21 14:02:01 echoes kernel: ata1.00: status: { DRDY }
abr 21 14:02:01 echoes kernel: ata1: hard resetting link
abr 21 14:02:01 echoes kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
abr 21 14:02:01 echoes kernel: ata1.00: configured for UDMA/100
abr 21 14:02:01 echoes kernel: ata1: EH complete
abr 21 14:01:51 echoes udisksd[627]: Error performing housekeeping for drive /org/freedesktop/UDisks2/drives/TOSHIBA_MQ01ABD100_Y44MT611T: Error updating SMART data: sk_disk_smart_status: Input/output error (udisks-error-quark, 0)
dmesg
[55661.023028] ata1.00: exception Emask 0x0 SAct 0x8000 SErr 0x0 action 0x6 frozen
[55661.023034] ata1.00: failed command: READ FPDMA QUEUED
[55661.023040] ata1.00: cmd 60/08:78:18:08:c0/00:00:4b:00:00/40 tag 15 ncq 4096 in
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[55661.023042] ata1.00: status: { DRDY }
[55661.023046] ata1: hard resetting link
[55666.358537] ata1: link is slow to respond, please be patient (ready=0)
[55671.053813] ata1: COMRESET failed (errno=-16)
[55671.053819] ata1: hard resetting link
[55676.389438] ata1: link is slow to respond, please be patient (ready=0)
[55678.897149] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[55681.320305] ata1.00: configured for UDMA/100
[55681.320319] ata1.00: device reported invalid CHS sector 0
[55681.320349] ata1: EH complete
[55729.969443] [drm:intel_set_cpu_fifo_underrun_reporting [i915]] *ERROR* uncleared fifo underrun on pipe A
[55729.969588] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun
dmesg
[102884.889930] systemd[1]: systemd-journald.service: main process exited, code=dumped, status=6/ABRT
[102884.890305] systemd[1]: Unit systemd-journald.service entered failed state.
[102884.890333] systemd[1]: systemd-journald.service failed.
[102885.560745] systemd-coredump[28916]: Detected coredump of the journal daemon itself, diverted to /var/lib/systemd/coredump/core.systemd-journal.0.5bf9a012fed048ce8975998cf3c3c20e.6705.1427990901000000.
[102885.860957] systemd-journald[28919]: File /var/log/journal/b130c96d1371445d9ddeb40c51c77dd6/system.journal corrupted or uncleanly shut down, renaming and replacing.
[102921.797810] systemd-journald[28919]: File /var/log/journal/b130c96d1371445d9ddeb40c51c77dd6/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[104179.117363] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[104179.117369] ata1.00: failed command: READ FPDMA QUEUED
[104179.117375] ata1.00: cmd 60/08:00:48:88:8b/00:00:4d:00:00/40 tag 0 ncq 4096 in
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[104179.117377] ata1.00: status: { DRDY }
[104179.117381] ata1: hard resetting link
[104184.453382] ata1: link is slow to respond, please be patient (ready=0)
[104189.149114] ata1: COMRESET failed (errno=-16)
[104189.149121] ata1: hard resetting link
[104189.469276] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[104189.952982] ata1.00: configured for UDMA/100
[104189.952989] ata1.00: device reported invalid CHS sector 0
[104189.953004] ata1: EH complete
[104508.223792] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[104508.223798] ata1.00: failed command: SMART
[104508.223803] ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 2
res 40/00:ff:80:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[104508.223806] ata1.00: status: { DRDY }
[104508.223810] ata1: hard resetting link
[104509.984601] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[104510.698126] ata1.00: configured for UDMA/100
[104510.698157] ata1: EH complete
One of the latest and worse
journalctl -xfa --system
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:00:e0:d6:75/00:00:00:00:00/40 tag 0 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:08:08:d8:75/00:00:00:00:00/40 tag 1 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:10:30:d9:75/00:00:00:00:00/40 tag 2 ncq 4096 out
res 40/00:ff:80:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:18:58:da:75/00:00:00:00:00/40 tag 3 ncq 4096 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:20:e8:e5:75/00:00:00:00:00/40 tag 4 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:28:80:db:75/00:00:00:00:00/40 tag 5 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:30:68:dd:75/00:00:00:00:00/40 tag 6 ncq 4096 out
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:38:90:de:75/00:00:00:00:00/40 tag 7 ncq 4096 out
res 40/00:ff:80:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:40:b8:df:75/00:00:00:00:00/40 tag 8 ncq 4096 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:48:90:e1:75/00:00:00:00:00/40 tag 9 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:50:98:e3:75/00:00:00:00:00/40 tag 10 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:58:c0:e4:75/00:00:00:00:00/40 tag 11 ncq 4096 out
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/c8:78:28:b9:2a/0b:00:4e:00:00/40 tag 15 ncq 1544192 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:80:b0:4b:c0/00:00:4f:00:00/40 tag 16 ncq 4096 out
res 40/00:ff:80:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/10:88:90:4b:80/00:00:50:00:00/40 tag 17 ncq 8192 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:90:98:22:81/00:00:50:00:00/40 tag 18 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:98:00:0e:00/00:00:5f:00:00/40 tag 19 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:a0:00:08:80/00:00:5f:00:00/40 tag 20 ncq 4096 out
res 40/00:ff:ff:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:a8:80:08:80/00:00:5f:00:00/40 tag 21 ncq 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/10:b0:08:0b:81/00:00:5f:00:00/40 tag 22 ncq 8192 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:b8:70:c8:75/00:00:00:00:00/40 tag 23 ncq 4096 out
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:c0:20:c9:75/00:00:00:00:00/40 tag 24 ncq 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:c8:88:c9:75/00:00:00:00:00/40 tag 25 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:d0:58:ca:75/00:00:00:00:00/40 tag 26 ncq 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:d8:a0:ce:75/00:00:00:00:00/40 tag 27 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:e0:68:d3:75/00:00:00:00:00/40 tag 28 ncq 4096 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:e8:90:d4:75/00:00:00:00:00/40 tag 29 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1.00: failed command: WRITE FPDMA QUEUED
abr 22 12:57:11 echoes kernel: ata1.00: cmd 61/08:f0:b8:d5:75/00:00:00:00:00/40 tag 30 ncq 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1: hard resetting link
abr 22 12:57:11 echoes kernel: ata1: link is slow to respond, please be patient (ready=0)
abr 22 12:57:11 echoes kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
abr 22 12:57:11 echoes kernel: ata1.00: configured for UDMA/100
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: ata1.00: device reported invalid CHS sector 0
abr 22 12:57:11 echoes kernel: sd 0:0:0:0: [sda] UNKNOWN Result: hostbyte=0x00 driverbyte=0x06
abr 22 12:57:11 echoes kernel: sd 0:0:0:0: [sda] CDB:
abr 22 12:57:11 echoes kernel: cdb[0]=0x2a: 2a 00 12 88 d7 c0 00 04 d0 00
abr 22 12:57:11 echoes kernel: blk_update_request: I/O error, dev sda, sector 310958016
abr 22 12:57:11 echoes kernel: EXT4-fs warning (device sda2): ext4_end_bio:317: I/O error -5 writing to inode 36311758 (offset 8388608 size 2695168 starting block 38869906)
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995128
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995129
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995130
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995131
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995132
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995133
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995134
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995135
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995136
abr 22 12:57:11 echoes kernel: Buffer I/O error on device sda2, logical block 19995137
abr 22 12:57:11 echoes kernel: sd 0:0:0:0: [sda] UNKNOWN Result: hostbyte=0x00 driverbyte=0x06
abr 22 12:57:11 echoes kernel: sd 0:0:0:0: [sda] CDB:
abr 22 12:57:11 echoes kernel: cdb[0]=0x2a: 2a 00 4b dd 39 88 00 01 78 00
abr 22 12:57:11 echoes kernel: blk_update_request: I/O error, dev sda, sector 1272789384
abr 22 12:57:11 echoes kernel: EXT4-fs warning (device sda2): ext4_end_bio:317: I/O error -5 writing to inode 34999445 (offset 0 size 192512 starting block 159098720)
abr 22 12:57:11 echoes kernel: sd 0:0:0:0: [sda] UNKNOWN Result: hostbyte=0x00 driverbyte=0x06
abr 22 12:57:11 echoes kernel: sd 0:0:0:0: [sda] CDB:
abr 22 12:57:11 echoes kernel: cdb[0]=0x2a: 2a 00 4e 2a b3 e8 00 05 40 00
abr 22 12:57:11 echoes kernel: blk_update_request: I/O error, dev sda, sector 1311421416
abr 22 12:57:11 echoes kernel: EXT4-fs warning (device sda2): ext4_end_bio:317: I/O error -5 writing to inode 35001016 (offset 0 size 2232320 starting block 163927845)
abr 22 12:57:11 echoes kernel: ata1: EH complete
abr 22 12:57:11 echoes kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
abr 22 12:57:11 echoes kernel: ata1.00: failed command: CHECK POWER MODE
abr 22 12:57:11 echoes kernel: ata1.00: cmd e5/00:00:00:00:00/00:00:00:00:00/00 tag 25
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
abr 22 12:57:11 echoes kernel: ata1.00: status: { DRDY }
abr 22 12:57:11 echoes kernel: ata1: hard resetting link
abr 22 12:57:11 echoes kernel: ata1: link is slow to respond, please be patient (ready=0)
abr 22 12:57:11 echoes kernel: ata1: COMRESET failed (errno=-16)
abr 22 12:57:11 echoes kernel: ata1: hard resetting link
abr 22 12:57:11 echoes kernel: ata1: link is slow to respond, please be patient (ready=0)
abr 22 12:57:11 echoes kernel: ata1: COMRESET failed (errno=-16)
abr 22 12:57:11 echoes kernel: ata1: hard resetting link
abr 22 12:57:11 echoes kernel: ata1: link is slow to respond, please be patient (ready=0)
abr 22 12:57:11 echoes kernel: ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
abr 22 12:57:11 echoes kernel: ata1.00: configured for UDMA/100
abr 22 12:57:11 echoes kernel: ata1: EH complete
Current smart status:
smartctl 6.3 2014-07-26 r3976 [x86_64-linux-4.0.1-1-ARCH] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD MQ01ABD...
Device Model: TOSHIBA MQ01ABD100
Serial Number: Y44MT611T
LU WWN Device Id: 5 000039 5e1a80e85
Firmware Version: AX1P5E
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun May 3 16:42:06 2015 ART
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 234) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1671
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 306
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 152
7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 699
10 Spin_Retry_Count 0x0033 106 100 030 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 300
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 216
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 14
193 Load_Cycle_Count 0x0032 099 099 000 Old_age Always - 14140
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 34 (Min/Max 16/44)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 19
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
220 Disk_Shift 0x0002 100 100 000 Old_age Always - 0
222 Loaded_Hours 0x0032 099 099 000 Old_age Always - 515
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
226 Load-in_Time 0x0026 100 100 000 Old_age Always - 190
240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Vendor (0x50) Completed without error 00% 611 -
# 2 Short offline Completed without error 00% 611 -
# 3 Short offline Completed without error 00% 597 -
# 4 Vendor (0x50) Completed without error 00% 583 -
# 5 Short offline Completed without error 00% 583 -
# 6 Vendor (0x50) Completed without error 00% 575 -
# 7 Short offline Completed without error 00% 575 -
# 8 Short offline Completed without error 00% 547 -
# 9 Extended offline Completed without error 00% 529 -
#10 Short offline Completed without error 00% 355 -
#11 Short offline Completed without error 00% 355 -
#12 Extended offline Aborted by host 70% 355 -
#13 Short offline Completed without error 00% 319 -
#14 Vendor (0x50) Completed without error 00% 13 -
#15 Short offline Completed without error 00% 13 -
#16 Short offline Completed without error 00% 12 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Kernels used have been from 3.9 to current: Linux echoes 4.0.1-1-ARCH #1 SMP PREEMPT Wed Apr 29 12:00:26 CEST 2015 x86_64 GNU/Linux
Last edited by jesu (2015-05-03 19:42:53)

Something i'd noticed both the first time i was on arch and now i've reinstalled it, was that at first i didn't have this problem. I mean, when Arch was just installed. While i was installing and setting up everything.
Now, i'm not 100% sure about this, but i think problems began when using my current user. Disk is partitioned the following way:
$ lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 931,5G 0 disk
├─sda1 8:1 0 1000M 0 part
├─sda2 8:2 0 260M 0 part /boot
├─sda3 8:3 0 207,7G 0 part
├─sda4 8:4 0 25G 0 part
├─sda5 8:5 0 14,8G 0 part
├─sda6 8:6 0 80,5G 0 part /
├─sda8 8:8 0 599G 0 part /home
└─sda9 8:9 0 2G 0 part [SWAP]
So, i believe problems, for some reason, are related (and were related), both before and now, to the /home partition, /dev/sda8 in this ocassion.
Because of this, i booted into systemd rescue mode, like root, rw, and unmounted /home partition. Despite root-only limitations, i used the system for a couple of hours, started lxqt, browsed the web mainly, and experienced no problem at all.
Now i booted normally, with my regular user, and these problems are experienced just like before (and almost instantly, like 3 or 5 minutes after starting system use).
dmesg this time showed a some different log, though it's not the first time i see this. I just didn't saved that kind of log before.
[ 653.821719] ata1.00: exception Emask 0x0 SAct 0x100 SErr 0x0 action 0x6 frozen
[ 653.821726] ata1.00: failed command: READ FPDMA QUEUED
[ 653.821732] ata1.00: cmd 60/08:40:60:25:43/00:00:1b:00:00/40 tag 8 ncq 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 653.821735] ata1.00: status: { DRDY }
[ 653.821739] ata1: hard resetting link
[ 659.156760] ata1: link is slow to respond, please be patient (ready=0)
[ 663.851604] ata1: COMRESET failed (errno=-16)
[ 663.851610] ata1: hard resetting link
[ 669.186591] ata1: link is slow to respond, please be patient (ready=0)
[ 673.881456] ata1: COMRESET failed (errno=-16)
[ 673.881462] ata1: hard resetting link
[ 679.216481] ata1: link is slow to respond, please be patient (ready=0)
[ 702.743982] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 703.012578] ata1.00: configured for UDMA/100
[ 703.012584] ata1.00: device reported invalid CHS sector 0
[ 703.012599] ata1: EH complete
[ 714.097642] systemd[1]: systemd-journald.service watchdog timeout (limit 1min)!
[ 742.443488] sd 0:0:0:0: [sda] tag#18 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x06
[ 742.443494] sd 0:0:0:0: [sda] tag#18 CDB: opcode=0x2a 2a 00 28 c3 c6 40 00 00 10 00
[ 742.443497] blk_update_request: I/O error, dev sda, sector 683918912
[ 742.443503] EXT4-fs warning (device sda8): ext4_end_bio:317: I/O error -5 writing to inode 20322020 (offset 0 size 0 starting block 85489866)
[ 742.443506] Buffer I/O error on device sda8, logical block 9323208
[ 742.443508] Buffer I/O error on device sda8, logical block 9323209
[ 742.443515] sd 0:0:0:0: [sda] tag#19 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x06
[ 742.443518] sd 0:0:0:0: [sda] tag#19 CDB: opcode=0x2a 2a 00 28 c3 c6 80 00 00 10 00
[ 742.443520] blk_update_request: I/O error, dev sda, sector 683918976
[ 742.443522] EXT4-fs warning (device sda8): ext4_end_bio:317: I/O error -5 writing to inode 20322020 (offset 0 size 0 starting block 85489874)
[ 742.443524] Buffer I/O error on device sda8, logical block 9323216
[ 742.443526] Buffer I/O error on device sda8, logical block 9323217
[ 742.443531] sd 0:0:0:0: [sda] tag#20 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x06
[ 742.443534] sd 0:0:0:0: [sda] tag#20 CDB: opcode=0x2a 2a 00 28 c3 c6 d0 00 00 10 00
[ 742.443536] blk_update_request: I/O error, dev sda, sector 683919056
[ 742.443538] EXT4-fs warning (device sda8): ext4_end_bio:317: I/O error -5 writing to inode 20322020 (offset 0 size 0 starting block 85489884)
[ 742.443540] Buffer I/O error on device sda8, logical block 9323226
[ 742.443542] Buffer I/O error on device sda8, logical block 9323227
[ 742.443547] sd 0:0:0:0: [sda] tag#21 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x06
[ 742.443549] sd 0:0:0:0: [sda] tag#21 CDB: opcode=0x2a 2a 00 28 c3 c7 10 00 00 10 00
[ 742.443551] blk_update_request: I/O error, dev sda, sector 683919120
[ 742.443553] EXT4-fs warning (device sda8): ext4_end_bio:317: I/O error -5 writing to inode 20322020 (offset 0 size 0 starting block 85489892)
[ 742.443555] Buffer I/O error on device sda8, logical block 9323234
[ 742.443557] Buffer I/O error on device sda8, logical block 9323235
[ 756.187685] systemd[1]: systemd-journald.service: main process exited, code=dumped, status=6/ABRT
[ 756.187986] systemd[1]: Unit systemd-journald.service entered failed state.
[ 756.188116] systemd[1]: systemd-journald.service failed.
[ 756.188474] systemd[1]: systemd-journald.service has no holdoff time, scheduling restart.
[ 756.189106] systemd[1]: Stopping Flush Journal to Persistent Storage...
[ 756.189143] systemd[1]: Listening on Journal Audit Socket.
[ 756.189801] systemd[1]: Starting Journal Service...
[ 757.525493] systemd-coredump[1038]: Detected coredump of the journal daemon itself, diverted to /var/lib/systemd/coredump/core.systemd-journal.0.b8610e85f9074a418534aaee0adbac56.141.1430763073000000.lz4.
[ 758.133944] systemd-journald[1050]: File /var/log/journal/f646626ba4b647f48501020bf12ca33b/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 758.503041] systemd[1]: Started Journal Service.
[ 759.180771] systemd-journald[1050]: File /var/log/journal/f646626ba4b647f48501020bf12ca33b/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[ 974.867721] ata1.00: exception Emask 0x0 SAct 0x3f80 SErr 0x0 action 0x6 frozen
[ 974.867732] ata1.00: failed command: WRITE FPDMA QUEUED
[ 974.867742] ata1.00: cmd 61/08:38:68:d3:c5/00:00:1a:00:00/40 tag 7 ncq 4096 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 974.867747] ata1.00: status: { DRDY }
[ 974.867751] ata1.00: failed command: WRITE FPDMA QUEUED
[ 974.867759] ata1.00: cmd 61/08:40:88:d3:c5/00:00:1a:00:00/40 tag 8 ncq 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 974.867763] ata1.00: status: { DRDY }
[ 974.867767] ata1.00: failed command: WRITE FPDMA QUEUED
[ 974.867774] ata1.00: cmd 61/08:48:a0:d3:c5/00:00:1a:00:00/40 tag 9 ncq 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 974.867778] ata1.00: status: { DRDY }
[ 974.867781] ata1.00: failed command: WRITE FPDMA QUEUED
[ 974.867789] ata1.00: cmd 61/20:50:c0:d3:c5/00:00:1a:00:00/40 tag 10 ncq 16384 out
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 974.867793] ata1.00: status: { DRDY }
[ 974.867796] ata1.00: failed command: WRITE FPDMA QUEUED
[ 974.867803] ata1.00: cmd 61/10:58:f0:d3:c5/00:00:1a:00:00/40 tag 11 ncq 8192 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 974.867807] ata1.00: status: { DRDY }
[ 974.867810] ata1.00: failed command: WRITE FPDMA QUEUED
[ 974.867817] ata1.00: cmd 61/08:60:10:d4:c5/00:00:1a:00:00/40 tag 12 ncq 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 974.867821] ata1.00: status: { DRDY }
[ 974.867824] ata1.00: failed command: WRITE FPDMA QUEUED
[ 974.867831] ata1.00: cmd 61/18:68:28:d4:c5/00:00:1a:00:00/40 tag 13 ncq 12288 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 974.867835] ata1.00: status: { DRDY }
[ 974.867841] ata1: hard resetting link
[ 980.202774] ata1: link is slow to respond, please be patient (ready=0)
[ 984.900902] ata1: COMRESET failed (errno=-16)
[ 984.900908] ata1: hard resetting link
[ 990.236024] ata1: link is slow to respond, please be patient (ready=0)
[ 994.930829] ata1: COMRESET failed (errno=-16)
[ 994.930836] ata1: hard resetting link
[ 996.798104] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 997.014012] ata1.00: configured for UDMA/100
[ 997.014020] ata1.00: device reported invalid CHS sector 0
[ 997.014023] ata1.00: device reported invalid CHS sector 0
[ 997.014025] ata1.00: device reported invalid CHS sector 0
[ 997.014026] ata1.00: device reported invalid CHS sector 0
[ 997.014028] ata1.00: device reported invalid CHS sector 0
[ 997.014030] ata1.00: device reported invalid CHS sector 0
[ 997.014031] ata1.00: device reported invalid CHS sector 0
[ 997.014065] ata1: EH complete
There are some sda8 (home) related messages. I also found these messages first time Arch was installed (i think also related to home partition).
root and home partitions are both ext4.

Running Mavericks on an iMac 2.7 GHz Intel Core i5, I've been trying to install Adobe CS3. All components install except InDesign. Is this an installation disk problem or is it not compatible with the OS?

Running Mavericks on an iMac 2.7 GHz Intel Core i5, I've been trying to install Adobe CS3 Design Premium. All components install except InDesign. Is this an installation disk problem, or is there a compatibility problem with the OS?

I fear that you are trying to download OLDER Software on a newer Operating Sysytem Meaning that you need to Install the Latest Version of Adobe on the Newer Operating System for it to work Properly. Be sure to always check the minimum System Requirements.

Snow Leopard and hard disk problems?

This may just be a coincidence but I and several colleagues have had problems with Macs over the past week.
a) My Macbook Pro lost the date/time and wi-fi settings. Next reboot wi-fi was still lost. Now seems OK again.
b) At times my 24" iMac is running slowly when nothing seems to be hogging resources (eg just copying a 3Gb file to an external hard disk). Time Machine also seems to be taking much longer to backup.
c) Hard disk failed on a Macbook Pro of a colleague
d) iMac 27" seems to be having severe hard disk problems for another colleague - Applecare will be visiting after trying numerous fixes over the phone.
On my machines I have run the Cocktail suite (permissions, scripts and caches) Disk Utility Repair and Techtools Deluxe (no reported problems) but the iMac problems seem to creep back.
It is like a disk caching process (or Spotlight?) is not cleaning up properly and is clagging up the system. Or maybe a hard disk is close to failure but the problem is not severe enough to show up in diagnostics? In any case I am diligent about backing up at the moment!

Or maybe a hard disk is close to failure but the problem is not severe enough to show up in diagnostics?
Common symptoms of a dying hard drive
Hard drive is making a clicking, whirring, grinding, ping pong ball noise or any other type of unusal noises.
Hard drive is not spinning.
Computer is not recognizing the hard drive.
Sluggish loading of applications.
System freezes and hangs.
An interesting site - Hard Drive Sounds by drive manufacturer.
How much hard drive space do you have left?
Disk Inventory X
OmniDiskSweeper
WhatSize
SpaceControl
Disconnect all peripherals from your computer. Boot from your install disc & run _*Repair Disk*_ from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select *Disk Utility.*
Select the disk or volume in the list of disks and volumes, and then click *First Aid.*
Click _*Repair Disk.*_
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751

MBA hard disk problems

I appear to be having hard disk problems and would appreciate any suggestions as to how to determine what the cause might be.
It began when the MBA late 2008 with 10.6.6 would not startup, just an endless cog wheel. Using the installation disk I found that the disk repair utility identified that the MBA hard disk was corrupted and the repair utility couldn't repair it.
I deleted the contents of the MBA disk verified the disk and reinstalled the system software and all my other programmes and files.
(This took about a day as I did not have a backup of the MBA but I did have the files and programmes on other disks etc. (Never again - I bought an external hard disk so that I could have a copy of the installation disc on it and also a backup of the MBA and all the system software updates.)
All has been well for a couple of weeks until today when the MBA would not start. For the first time in my life I saw a message covering most of the screen saying "Will not start up - turn the computer off by holding down the power button until it turns off and then restart the computer" or something similar.
Needless to say the computer refused to restart and again after looking at the MBA disk with the disk utility it required repair and again the repair utility said it could not complete the repair.
Wiped the MBA disk again and reinstalled and restored the programmes and files. (so much easier with the install image and backup on an external hard disk and Time Machine is tremendous).
So the MBA appears to be back to normal.
But will it stop again? It the hard disk flawed or fundamentally corrupted?
I have verified the hard disk with the apple disk utility and also with onyx. Both say it appears to be ok.
Any suggestions as to how to work out what if anything is going wrong would be much appreciated.

When I said verified I meant that I ran the verify and repair command in the apple disk utility and also ran both the smart status in onyx and additionally the verification command in onyx.
Just to clarify the second occasion that the MBA would not startup falls under the category of “You need to restart your computer” which indicates a indicates a “kernel panic”.

Window detected a hard disk Problem on my Satellite L505-S5988

Hi,
I have a Toshiba Satellite L505-S5988 with window 7 Home Premium 09 Service pack 1. It is 2+ years old and my hard drive is Toshiba MK3263GSX 287GB. Lately, I got a window warning message as “ Windows detected a hard disk Problem. Back up your files immediately to prevent information loss, and then contact the computer manufacturer to determine if you need to repair or place the disk….. The following hard disks are reporting failure: Disk Name: TOSHIBA MK3263GSX Volume: C:\ “.
Since then, I have imaged my laptop and run malware/spyware softwares, and it looks like my computer is clean. The laptop device manager said my hard drive is working properly. However the warning keeps pops up. I opened Administrative Event Viewer and found the below warning:
“Log Name: System, Source: Disk, Event ID: 52.
The driver has detected that device \Device\Harddisk0\DR0 has predicted that it will fail. Immediately back up your data and replace your hard disk drive. A failure may be imminent.”
EventData
\Device\Harddisk0\DR0
0E00030001000000000000003400048002000000000000000000000000112
D000000000000000000000000
Besides this warning, there are also other errors and warnings back to years ago, such as AFS failed to load, print service… Despite all these errors and warnings, my laptop seems to be running OK. I was not prevented from doing anything that I usually do.
Questions:
Is there a tool I can run to verify that my hard drive is truly bad?
Can any tool further identify where?
Can it be repaired? Reformat? Or I have to replace with a new one?
What options I have if I have to replace with a new one?
What is average cost of it?
Any help will be highly appreciated.

Satellite L505-S5988
Event ID: 52 - Source: Disk
..the warning keeps pops up.
That's good enough for me. I would replace the disk.
You can verify it with the free trial of HD Tune.
-Jerry

Possible disk problem.

Similar Messages

Maybe you are looking for