Possible drop tablespace PSAPSR3702 after upgrade EHP5

Hi experts,
Can I drop tablespace PSAPSR3702 after upgrade EHP5? I cannot found this point in EHP5 installation documents as in the EHP4 documents
My system is running on Oracle
Thanks & Regards,
Luong
Edited by: LuongDK on Aug 25, 2011 4:40 AM

Hi LuongDK,
If you see clearly after refresh your DB size stat, you should see PSAPSR3701 is empty OR with very small size compare to PSAPSR3702.
Therefore, you should drop PSAPSR3701 and NOT PSAPSR3702. You can confirm by ensuring no entry for PSAPSR3701 in table TAORA & IAORA.
Thanks,
Nicholas Chang

Similar Messages

  • System Tablespace objects after upgrade (mdsys, outln, ctxsys, etc)

    I have objects in my system tablespace under listed owners. I believe by default with a new 10g install their home is SYSAUX. Is that correct? Oracle changes the default, but doesn't bother to move the objects during upgrade??!!?!!?!!!

    Issue was I didn't know what shoudl be in the SYSTEM tablespace and what shoudl be in the SYSAUX tablespace. And what the default tablespace shoudl be for all these id's. I know I didn't communicate that, but I don't think I realized the full extent of the issue until I did further research, which, undfortunately I did after posting the message.
    What I found is;
    SYS, some SYSTEM and OUTLN objecst can reside in the SYSTEM tablespace
    all others shoudl now be in SYSAUX and SYSAUX shoud be the default tablepsace for them.
    SYS and OUTLN use SYSTEM as thier default tablespace, however, I haven't definitively identified the default tablespace for SYSTEM db userid.
    Facilities owned by the SYSTEM db userid seem to have been diminished in stature, or maybe just determined to be detrimental to SYSTEM tablespace. I have seen notes in during the upgrae process from 8i to 10g that SYSTEM userid should not use SYSTEM as its default tablespace, but exactly what should be used is not clearly defined.
    I support Financials E-BS, and we have migrated from 10.7 on 7.x to 11.5.10.2 on 10g. I am afraid that between patching and addressing user expectations, I have not caught all the nuances and adjustments that have coincided with the database upgrades. We have reached a relative level of stability (OCT and JAN CPU's still need to be applied), so I am looking at performance, database standards (through OEM), and tuning.
    Thanks for your response.

  • SRW2048 - Exchange/outlook drops connection briefly after upgrade

    I recently upgraded to gigabit and this problem started to occur where outlook(as well as another program - Timberline) drops its connection with the server for a second on multiple clients.  I would just shrug it off but timberline is not very friendly with the way it locks opened files...
    Things I have tried with no luck:
    Updated the firmware & reboot
    Installed an Intel Pro 10/100/1000 NIC in the server & one of the workstations
    Manually set all the ports speed to 100Mbps through the GUI
    I thought the problem might have been cable so I reinstalled the old switch and put off the upgrade until after the remodel.  Now the remodeling is done, the building is all cat6...  I put the new switch back in and the problem is back.  What in the world??

    I did an RMA on the switch.  I put the replacement in this morning and the problems are back...  I ran across another thread that suggested manually setting the speed and duplex, I tried that with no success...  The server has an Intel PRO/1000 GT, and Intel PRO/1000 MT.  Most of the desktops have the Intel PRO/1000 GT. The problem occurs on desktops with Broadcom gigabit nic's also.  Any ideas?

  • WIFI intermittent connectivity issues after upgrading to iOS 8.0.2

    Hi,
    WIFI seems to be dropping a lot after upgrading to iOS 8.0.2. I even took the iPad back to Apple and they replaced it with a new one with iOS7, which was working fine, then the same problem resurfaced after upgrading to iOS 8.0.2. I can't use my iPad in the evening at all.
    My iPhone is fine after the upgrade though.
    Clearly an iOS8 software issuse on iPads?
    Thanks

    Similar thing happened to me..  Seems like the bug has not been solved.. I managed to restore to iOS 8 and this resolved the issue, at least for the time-being!
         Apple team, my sincere request to you:Please attend this bug asap. It really dissolves the purpose  of an iPhone..
    Keeping my fingres crossed till then!

  • After upgrading 1.6, OK to drop user FLOWS_010500?

    Hi,
    After upgrading 1.6, user FLOWS_010500 is still there and usage of tablespace increased from 95M to 178M in my case.
    Is it OK to drop user FLOWS_010500?
    Thanks and happy new year,

    Seong,
    Once you have done the 1.6 upgrade, and everything seems to be working, you can drop the FLOWS_010500 schema.
    The conservative side in me would recommend exporting it first, just to be safe...
    Thanks,
    - Scott -

  • Can't open my photo library after upgrading to iPhoto 11.  is it possible to load iPhoto 9.0.1 after loading 11?  have followed all other instructions but it still won't let me open iPhoto.

    can't open my photo library after upgrading to iphoto 11.  Is it possible to download iphoto 9.0.1 after installing '11.  Have followed all the other instructions and am in a loop which doesn't allow me to access iphoto or my photos.

    when iphoto wouldnt open we read the trouble shooting info and it said that we may have needed to download 9.0.1 if we had an older version.  We obviously didn't download it before the upgrade and wondered if it would cause problems or indeed solve the problem if we downloaded it now!
    When we try to open iphoto is says:
    To open your library with this version of iphoto it first needs to be prepared
    To prepare the library use the iphoto library upgrader available from Apple.
    We have downloaded this twice now and it still sends us this message when we try to open iphoto. 

  • MacBook Pro drops Wi-Fi connection after upgrading to 10.6.5. Fixed!

    MacBook Pro drops Wi-Fi connection after upgrading to 10.6.5. Airport says no IP is detected then suddenly reconnects?
    This has been a problem I’ve been troubleshooting for the last month. I’m new to the Mac family and have loved my experience up until this point. I was under the impression that mac’s are supposed to be so user friendly that even your grandmother could use one with out having any technical knowledge. I mean I shouldn’t have to be deleting drivers or reformat my mac because of an OS update glitch? (That’s what the guy at the Genius Bar told me to do.) What I refused to succumb to was that I’m really good with computers. I get at least a phone call every other week from someone asking me for tech support. So I’d like to think that nothing I’ve done to the system would have caused this anomaly.
    After numerous attempts of troubleshooting and researching forms I believe I’ve discovered a solutions that seems to be working for me.
    Here are the steps I took to create a consistent connection to my Wi-Fi. I believe it was a combination of all these steps to create success.
    1.) Changed my router to use G Wireless Only. (I’m assuming this removed any unnecessary frequencies to allow G to broadcast stronger?)
    2.) Did a scan on the other networks in my area to find out what channel everyone else was broadcasting on. Copy and past the text below into a terminal window.
    sudo ln -s /System/Library/PrivateFrameworks/Apple80211.framework/Versions/Current/Resourc es/airport /usr/sbin/airport
    This will allow you to simply type “airport” in the terminal window to execute the command.
    Type airport –s
    This will display all the networks in your area and what channel they are broadcasting on.
    3.) Changed my router to use a channel that no one in my area was using. (This helped to make my network stronger and free of interference.)
    The last steps will help your home network improve but these next steps I believe helped fix any install errors caused maybe by the 10.6.5 update on my mac.
    4.) Boot your Mac into safe mode by holding down the shift key while booting.
    5.) Open System Preferences and Click on Network.
    6.) Click the drop down menu from Locations at the top of the screen. Click edit locations..
    7.) Create a new location by clicking the + and give it a new name.
    8.) Delete the old location by clicking on the old locations name and click the – to remove.
    9.) Reboot
    10.) Open System Preference and click on Network.
    11.) Click on the settings sprocket next to the + and – and click on Set Service Order…
    12.) Drag Airport to the top of the list of devices then click Ok.
    Now this last step is what seemed to eliminate the issue. I hardcoded my IP address to my network. This way my computer will always use the same IP and not have to search.
    13.) Click on Advanced under Network.
    14.) Click on TCP/IP. Click on the drop down for Configure IPv4 and change it to Manually.
    15.) Fill out the fields with your IPv4 Address: 192.168.1.1xx (x=whatever number) Subnet Mask: 255.255.255.0 Router: 192.168.1.1 (All of these settings are pretty standard for most home networks.)
    16.) Click on the drop down for Configure IPv6 and change it to Off.
    17.) Next click on the DNS tab at the top.
    18.) Click the + to add a DNS Record.
    To find your DNS Server open a Terminal window by launching Applications --> Utilities --> Terminal
    Then Type cat /etc/resolv.conf
    (There is a space between cat and /. Without it you’ll get no such file or directory.)
    This should return two addresses. Your ISP’s DNS Servers.
    19.) Add both records to the DNS and click Ok.
    20.) Click Ok then under Network Click Ok.
    21.) Reboot router then Mac
    22.) Fixed my connection issue
    The symptoms I experienced eluded me to believe that something with the DHCP is going into an idle then disconnecting. Before when DHCP was set to automatically assign the network signal would time out then searchers for a new IP resulting in Airport displaying No IP is detected. By setting my IP to a fixed address I still notice a slight drop in bandwidth at moments but because of the assigned IP I never loose connection. I can now stream video, play games, chat all without getting disconnected.
    I believe this fix will work for my home network but I also noticed this issue at work so for each location that I connect for the time being I’ll create each there own location and hardcode the IP address to that network. I’ve been reading that 10.6.6 is coming soon so maybe this will be resolved for good in the next update.
    Let me know if this helps or if you have any questions.
    Best of luck.
    Message was edited by: erockdabass
    Message was edited by: erockdabass

    I have been having the same issue for the last two weeks. No real indication as to why it ever began other than I had turned off my router and Airport Extreme Base Station off for a weekend while I was away from my place.
    iPad, iPhone, iPod Touch, all have no issues at all with my Airport Extreme Base Station. Can stay connected throughout my living room, bathroom, bedroom, no issues whatsoever.
    My 5 month old MacBook Pro 2.66 GHz Core i7 Airport is sometimes perfect, able to connect, DHCP, and browse without issue. Then, for no reason, I won't be able to join my wireless network, or when I can join, I can't pick up an IP address. And then it will connect, pick up and IP, and then it won't browse. No real rhyme or reason to when this will happen, or when it works.
    I thought that it was an issue with my MacBook Pro, but then my sister visited with her brand new MacBook Pro 2.26 Intel Core 2 Duo, and while a month ago she was able to connect, DHCP, and browse without issue, this weekend she had all of the same issues I was having.
    My XBOX 360 and MacBook Pro have absolutely no issues with the wired connection. Only my WAN seems to have this issue.
    Did you ever find anything more to this?

  • After upgrade to Yosemite, drag and drop for files does not work, destination folder crashes.

    After upgrading to Yosemite, dragging and dropping files from one location to the destination folder, causes the destination folder crash. However, copying the file and then moving it works fine.
    I'm not sure where to report bugs, but I figured this would be the best option

    http://www.apple.com/feedback/  Feedback
    https://bugreport.apple.com/  BugReporter

  • My LaCie external hard drive connected to Time Machine for data backup drops it's connection and a error message displays tell me that I did not properly disconnect the device.  This started after upgrading to OSX10.6.7.

    My La Cie external hard drive drops it's connection after mounting on my iMac computer.  This problem seems to have started after upgrading to OSX10.6.7.  When I turn on my computer and than turn on the external hard drive the hard drive mounts to my disk top without any problem, but when I bring up Mail or Safari the hard drive drops its connection.  Is there a fix for this problem?  Hope someone can help.

    The connection to 10.6.7 may just be a coincidence.  I had a similar problem with a disk and was about to throw it out but decided to try a different USB cable.  That fixed the problem and the drive is still in use.
    Try a new cable if you have not already done so.
    Dave

  • Drag and drop doesn't work after upgrading to Yosemite

    It is strange.  Since upgrading yesterday to Yosemite, my drag and drop does not working consistently.  I use drag and drop all of the time, into emails, moving files from one folder to another, moving music from finder to itunes, etc.  It seems each time I try to drag a file, initially the Finder window I am dragging from crashes and re-starts.  Once it re-starts, I actually am able to move a file as normal for about a minute or two.  After a minute or two, if I try to drag and drop a file, again it crashes and re-opens.
    Does anyone have any ideas?  I did submit a bug notice to Apple, but thought maybe someone would have a fix.

    I'm not sure if this experience relates to your issue but maybe..
    After upgrading my iMac to Yos, I could only select and copy files to relocate them. Frustrating for a couple of days. I eventually found that the setting on my trackpad was for three fingers over a selected file/folder window/etc moved the item to where I wanted. It had automatically changed to this preference. Its called a 'three finger drag'. The video shows a pane being moved but it also applies to all files etc. It can found in preferences/trackpad/point & click. Here you can turn it off if that is hat is causing the issue. Otherwise no software solutions I'm aware of. Good luck.

  • I have a problem with my iphone,after upgrade software ios 6.0.1,  is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL  was not found

    I have a problem with my iphone,after upgrade software ios 6.0.1,  is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL  was not found

    You have to go to autherized iPhone agent.

  • 'RSTS_READ' after upgrade error Required conversion not possible (ZFORM16)

    Hi,
    We have recently upgraded from SAP 4.7 to SAP ECC 6.0.
    For client requirements, they have developed ZFORM16 in 2006 by copying the standard form HINCF160.
    But after upgradation, when we execute ZFORM16  for 2006 data we are getting the error message:
                             Required conversion not possible
    Some analysis of the issue is:
    1)     In include: ZPCF16IN3 at statement:    PERFORM read_temse.         " MDSNT927906
    2)     It is going to include : ZPCF16IN8 we are getting the error message at the statement :
    call function 'RSTS_READ'
    The error message is: Required conversion not possible
    When I have checked the standard of form 16 HINCF160 code in ECC 6.0 is as:
    In include PCF16IN3, PERFORM read_temse. Statement is commented and the corresponding form in PCF16IN8 include is also commented (Form  read_temse)  and now SAP is using different logic to get the DETAILS  OF TAX DEDUCTED.
    If I try to comment the PERFORM read_temse in ZPCF16IN3 then I am able to get the Form16 but DETAILS  OF TAX DEDUCTED are not displayed. DETAILS  OF TAX DEDUCTED logic is in PERFORM read_temse in ZPCF16IN3.
    Can someone help me in solving the issue?
    Regards,
    Prem

    We had to restart SAP & Oracle and the issue is solved

  • One of the field is disabled(input not possible) after upgrade in FPE1

    Hi ABAP Gurus,
      I am working on FPE1 Transaction Code and i just find out that after upgrade one of the field  on screen is not input possible but before upgrade we have that field as input/output  possible .
    so now we want same functionality what we have before . so which path do i need to follow because its standard screen .
    any suggestion is appreciated .
    Thanks,
    Jack
    Edited by: jack troy on Jun 24, 2009 7:36 PM

    Hi Ajay,
    Thanks for your reply . My question is can we enable field for input using transaction variant .because if i go to screen layout for FPE1 ,  i can see that this field is only output possible .
    Thanks,
    Jack

  • Photo Booth Freezes after upgrading to OS X Yosemite Wifi drops, iMac lags!

    Photo Booth Freezes after upgrading to OS X Yosemite Wifi drops, iMac lags!

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

  • Temporary segment can't be dropped after upgrading from 9.2.0.1 to 9.2.0.8

    After upgrading oracle from 9.2.0.1 to 9.2.0.8 ,alert.log show some corrupted block ,dbv also confirm the errors.
    alert log:
    SMON: enabling tx recovery
    Wed Aug 12 21:47:23 2009
    Database Characterset is ZHS16GBK
    Wed Aug 12 21:47:23 2009
    Hex dump of Absolute File 6, Block 11 in trace file d:\oracle\admin\oracle9i\bdump\oracle9i_smon_1100.trc
    Corrupt block relative dba: 0x0180000b (file 6, block 11)
    Bad header found during buffer read
    Data in bad block -
    type: 35 format: 2 rdba: 0x0040000b
    last change scn: 0x0000.00000000 seq: 0xff flg: 0x04
    consistency value in tail: 0x000023ff
    check value in block header: 0x551d, computed block checksum: 0x0
    spare1: 0x0, spare2: 0x0, spare3: 0x0
    Reread of rdba: 0x0180000b (file 6, block 11) found same corrupted data
    Hex dump of Absolute File 6, Block 19 in trace file d:\oracle\admin\oracle9i\bdump\oracle9i_smon_1100.trc
    Corrupt block relative dba: 0x01800013 (file 6, block 19)
    Bad header found during buffer read
    Data in bad block -
    type: 35 format: 2 rdba: 0x00400013
    last change scn: 0x0000.00000000 seq: 0xff flg: 0x04
    consistency value in tail: 0x000023ff
    check value in block header: 0x21f2, computed block checksum: 0x0
    spare1: 0x0, spare2: 0x0, spare3: 0x0
    Reread of rdba: 0x01800013 (file 6, block 19) found same corrupted data
    Hex dump of Absolute File 6, Block 195 in trace file d:\oracle\admin\oracle9i\bdump\oracle9i_smon_1100.trc
    Corrupt block relative dba: 0x018000c3 (file 6, block 195)
    Bad header found during buffer read
    Data in bad block -
    type: 0 format: 2 rdba: 0x004000c3
    last change scn: 0x0000.00000000 seq: 0xff flg: 0x04
    consistency value in tail: 0x000000ff
    check value in block header: 0x683, computed block checksum: 0x0
    spare1: 0x0, spare2: 0x0, spare3: 0x0
    Reread of rdba: 0x018000c3 (file 6, block 195) found same corrupted data
    Wed Aug 12 21:47:24 2009
    replication_dependency_tracking turned off (no async multimaster replication found)
    Completed: ALTER DATABASE OPEN  
    SYS@oracle9i>col segment_name for a20
    SYS@oracle9i>col segment_type for a20
    SYS@oracle9i>select segment_name,segment_type from dba_segments where header_file=6 and header_block
    =11;
    SEGMENT_NAME         SEGMENT_TYPE
    6.11                 TEMPORARY
    SYS@oracle9i>select segment_name,segment_type from dba_segments where header_file=6 and header_block
    =19;
    SEGMENT_NAME         SEGMENT_TYPE
    6.19                 TEMPORARY
    SYS@oracle9i>select segment_name,segment_type from dba_segments where header_file=6 and header_block
    =195;
    SEGMENT_NAME         SEGMENT_TYPE
    6.195                TEMPORARY
    smon can't clean the temporary segment,so I set event drop_segments ,but it also don't take effect

    You could run dbms_repair to mark those blocks as corrupted.
    You should
    a. take the tablespace offline
    b. run dbv a few times to confirm that it is always the same blocks and only these blocks in temporary segments that appear to be corrupted
    c. use dbms_repair to mark the corrupted blocks
    However, if it is always a segment header block that appears to be corrupted, it is suspicous behavioiur.
    Also, SMON is failing on the corrupted blocks which are segment headers -- had the corrupted blocks not been segment headers then SMON would not have even been reading all the blocks. It only reads the header blocks (segment/extent) to free the extents.
    But you should first go through your alert.log to find out when and, possiby why, those blocks are corrupt.

Maybe you are looking for